RDB156S [DYELEC]
SINGLE PHASE 1.5AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER;型号: | RDB156S |
厂家: | DIYI Electronic Technology Co., Ltd. |
描述: | SINGLE PHASE 1.5AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER |
文件: | 总3页 (文件大小:2740K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RDB151S THRU RDB157S
SINGLE PHASE 1.5AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
Glass passivated die construction
·
·
·
·
·
·
DB-S
Low forward voltage drop
0.311(7.9)
0.291(7.4)
0.043(1.1)
High current capability
0.035(0.9)
High surge current capability
Designed for surface mount application
Plastic material-UL flammability 94V-0
- +
0.402(10.2)
0.378(
)
9.6
~ ~
Mechanical Data
·Case: DB-S, molded plastic
·Terminals: plated leads solderable per
MIL-STD-202, Method 208
0.329(8.35)
(
0.313
)
7.95
0.098(2.50)
0.083(2.10)
·Polarity: as marked on case
Mounting position: Any
·
·Marking: type number
0.205(5.2)
0.197(5.0)
·Lead Free: For RoHS / Lead Free Version
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ambient temperature unless otherwise specified.
℃
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RDB
153S
RDB
154S
RDB
155S
RDB
156S
RDB
152S
RDB
157S
RDB
151S
SYMBOL
UNITS
V
TYPE NUMBER
VRRM
VRWM
VDC
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
50
100
70
200
140
400
600
420
800
560
1000
700
RMS Reverse Voltage
VRMS
IF(AV)
35
280
1.5
V
A
C=100
℃
Average Rectified Output Current (Note 1)@T
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
IFSM
55
A
I2t Rating for Fusing (t < 8.3ms)
12.554
2s
A
I
2 t
Forward Voltage per element @IF=1.5A
VFM
1.3
V
Peak Reverse Current
At Rated DC Blocking Voltage @TA=125
@TA=25
5.0
200
℃
℃
IR
uA
ns
Maximum reverse recovery time
(Note 3)
150
250
500
TRR
Typical Junction Capacitance per leg
Typical Thermal Resistance per leg
CJ
RθJA
25
40
pF
(Note 2)
/W
℃
RθJL
15
Operating and Storage Temperature Range
TJ,TSTG
-55to+150
℃
Note:1. Mounted on glass epoxy PC board with 1.3mm2 solder pad.
2.Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
version:02
1 of 3
www.dyelec.com
RDB151S THRU RDB157S
Fig. 1 Output Current Derating Curve
Fig. 2 Typical Forward Characteristics (per leg)
10
1.5
1.2
1.0
0.9
0.6
0.1
0.3
0
T = 25°C
Pulse Width = 300µs
A
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
40
80
120
160
TC , CASE TEMPERATURE (°C)
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
g ypical Reverse Characteristics (per element)
Fi . 4 T
Fig. 3 Maximum Peak Forward Surge Current (per leg)
100
60
TJ= 125°C
10
1.0
40
T = 25°C
J
20
0.1
TA = 25°C
Single Half Sine-Wave
Pulse Width =8.3ms
(JEDEC Method)
0.01
0
0
20
40
60
80
100 120 140
1.0
10
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
NUMBER OF CYCLES AT 60 Hz
g
Fi . 5
Mounting Pad Layout
0.047 MIN.
(1.20 MIN.)
0.405 MAX.
(10.3 MAX.)
0.062 MIN.
(1.6 MIN.)
0.205 (5.2)
0.195 (5.0)
2 of 3
version:02
www.dyelec.com
RDB151S THRU RDB157S
Important Notice and Disclaimer
Reproducing and modifying information of the document is prohibited without permission
•
from DIYI.
DIYI reserves the right to make changes to this document and its products and
•
specifications at any time without notice. Customers should obtain and confirm the
latest product information and specifications before final design, purchase or use.
DIYI disclaims any and all liability arising out of the application oruse of
•
any product including damages incidentally and consequentially occurred.
DIYI does not assume any and all implied warranties, including warranties of fitness for
•
particular purpose, non-infringement and merchantability.
Applications shown on the here indocument are examples of standard use and
•
operation. Customers are responsible in comprehending the suitable use in particular
applications.
DIYI makes no representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
The products shown herein are not designed and authorized for equipments requiring high
•
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these product
use in such applications
s for
do so at their own ris k andagree to fully indemnify DIYI for any damages resulting from such
improper use or sale.
Since DIYI uses lot number as the tracking base, please provide the lot number for tracking
•
when complaining.
3 of 3
version:02
www.dyelec.com
相关型号:
©2020 ICPDF网 联系我们和版权申明