DRD3390V39 [DYNEX]

Rectifier Diode; 整流器器二极管
DRD3390V39
型号: DRD3390V39
厂家: Dynex Semiconductor    Dynex Semiconductor
描述:

Rectifier Diode
整流器器二极管

二极管
文件: 总7页 (文件大小:373K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DRD3390V40  
Rectifier Diode  
DS6074 April 2012 (LN29429)  
FEATURES  
Double Side Cooling  
High Surge Capability  
KEY PARAMETERS  
APPLICATIONS  
VRRM  
IF(AV)  
IFSM  
4000V  
3388A  
62500A  
Rectification  
Free-wheel Diode  
DC Motor Control  
Power Supplies  
Welding  
Battery Chargers  
VOLTAGE RATINGS  
Part and  
Ordering  
Number  
Repetitive Peak  
Conditions  
Voltages  
VDRM and VDRM  
V
DRD3390V40  
DRD3390V39  
DRD3390V38  
DRD3390V37  
DRD3390V36  
DRD3390V35  
4000  
3900  
3800  
3700  
3600  
3500  
VRSM = VRRM+100V  
Lower voltage grades available.  
Outline type code: V  
ORDERING INFORMATION  
(See Package Details for further information)  
When ordering, select the required part number  
shown in the Voltage Ratings selection table.  
Fig. 1 Package outlines  
For example:  
DRD3390V37 for a 3700V device  
Note: Please use the complete part number when ordering  
and quote this number in any future correspondence  
relating to your order.  
1/7  
www.dynexsemi.com  
DRD3390V40  
SEMICONDUCTOR  
CURRENT RATINGS  
Tcase = 75°C unless stated otherwise  
Symbol  
Parameter  
Test Conditions  
Max.  
Units  
Double Side Cooled  
IF(AV)  
IF(RMS)  
IF  
Mean forward current  
RMS value  
Continuous (direct) on-state current  
Half wave resistive load  
4366  
6858  
6561  
A
A
A
-
-
Single Side Cooled (Anode side)  
IF(AV)  
IF(RMS)  
IF  
Mean forward current  
RMS value  
Half wave resistive load  
2926  
4596  
4066  
A
A
A
-
-
Continuous (direct) on-state current  
Tcase = 100°C unless stated otherwise  
Symbol  
Parameter  
Test Conditions  
Max.  
Units  
Double Side Cooled  
IF(AV)  
IF(RMS)  
IF  
Mean forward current  
RMS value  
Continuous (direct) on-state current  
Half wave resistive load  
3388  
5321  
4983  
A
A
A
-
-
Single Side Cooled (Anode side)  
IF(AV)  
IF(RMS)  
IF  
Mean forward current  
RMS value  
Half wave resistive load  
2232  
3506  
3015  
A
A
A
-
-
Continuous (direct) on-state current  
2/7  
www.dynexsemi.com  
DRD3390V40  
SEMICONDUCTOR  
SURGE RATINGS  
Symbol  
Parameter  
Test Conditions  
Max.  
Units  
IFSM  
I2t  
Surge (non-repetitive) on-state current  
I2t for fusing  
10ms half sine, Tcase = 150°C  
VR = 50% VRRM - ¼ sine  
10ms half sine, Tcase = 150°C  
VR = 0  
50.0  
12.5  
62.5  
19.6  
kA  
MA2s  
kA  
IFSM  
I2t  
Surge (non-repetitive) on-state current  
I2t for fusing  
MA2s  
THERMAL AND MECHANICAL RATINGS  
Symbol  
Parameter  
Test Conditions  
Min.  
Max.  
Units  
Rth(j-c)  
Thermal resistance junction to case  
Double side cooled  
Single side cooled  
DC  
-
0.0075  
0.015  
0.015  
0.002  
0.004  
160  
°C/W  
°C/W  
°C/W  
°C/W  
°C/W  
°C  
Anode DC  
Cathode DC  
Double side  
Single side  
-
-
Rth(c-h)  
Thermal resistance case to heatsink Clamping force 43kN  
-
(with mounting compound)  
-
-
Tvj  
Virtual junction temperature  
On-state (conducting)  
Reverse (blocking)  
-
150  
°C  
Tstg  
Fm  
Storage temperature range  
Clamping force  
-55  
38.0  
150  
°C  
47.0  
kN  
3/7  
www.dynexsemi.com  
DRD3390V40  
SEMICONDUCTOR  
CHARACTERISTICS  
Symbol  
Parameter  
Forward voltage  
Test Conditions  
Min.  
Max.  
Units  
VFM  
IRM  
QS  
Irr  
At 3000A peak, Tcase = 25°C  
At VDRM, Tcase = 150°C  
IF = 2000A, dIRR/dt =3A/µs  
Tcase = 150°C, VR =100V  
At Tvj = 150°C  
-
-
-
-
-
-
1.15  
250  
V
mA  
µC  
A
Peak reverse current  
Total stored charge  
Peak reverse recovery current  
Threshold voltage  
5000  
150  
VTO  
rT  
0.75  
0.118  
V
Slope resistance  
At Tvj = 150°C  
m  
CURVES  
10000  
8000  
6000  
4000  
2000  
dc  
1/2 wave  
3 phase sq.  
6 phase sq.  
0
0
2000  
4000  
6000  
8000  
Mean forward current IF(AV)- (A)  
Fig.2 Maximum (limit) on-state characteristics  
Fig.3 Dissipation curves  
VTM EQUATION  
Where A = - 0.15357  
B = 0.177571  
C = 0.000179  
D = - 0.01294  
VTM = A + Bln (IT) + C.IT+D.IT  
these values are valid for Tj = 150°C for IF 500A to 5000A  
4/7  
www.dynexsemi.com  
DRD3390V40  
SEMICONDUCTOR  
Fig.4 Total stored charge  
Fig.5 Maximum reverse recovery current  
Effective thermal resistance  
Junction to case C/W  
Conduction  
Double side Single side  
d.c.  
0.0075  
0.0085  
0.0092  
0.0119  
0.015  
0.016  
0.01607  
0.01634  
Half wave  
3 phase 120°  
6 phase 60°  
Fig.6 Surge (non-repetitive) forward current vs time  
(with 50% VRRM at Tcase 150°C)  
Fig.7 Maximum (limit) transient thermal impedance-  
junction to case  
5/7  
www.dynexsemi.com  
DRD3390V40  
SEMICONDUCTOR  
PACKAGE DETAILS  
For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise.  
DO NOT SCALE.  
Outline type code: V  
Nominal weight: 1100g  
Clamping force: 43kN ± 10%  
Note:  
Some packages may be supplied with gate and or tags.  
6/7  
www.dynexsemi.com  
DRD3390V40  
SEMICONDUCTOR  
IMPORTANT INFORMATION:  
This publication is provided for information only and not for resale.  
The products and information in this publication are intended for use by appropriately trained technical personnel.  
Due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute  
any guarantee of suitability for use in a specific application.The user must evaluate the suitability of the product and the completeness of  
the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requirements  
are met. Should additional product information be needed please contact Customer Service.  
Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical  
errors. The information is provided without any warranty or guarantee of any kind.  
This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the  
most up to date version and has not been superseded.  
The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property.  
The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or  
malfunction.  
The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use  
protective safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnected any  
electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves.  
Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the  
product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may include  
potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. Appropriate application design  
and safety precautions should always be followed to protect persons and property.  
Product Status & Product Ordering:  
We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for  
production. The annotations are as follows:-  
Target Information:  
Preliminary Information:  
No Annotation:  
This is the most tentative form of information and represents a very preliminary specification.  
No actual design work on the product has been started.  
The product design is complete and final characterisation for volume production is in  
progress.The datasheet represents the product as it is now understood but details may change.  
The product has been approved for production and unless otherwise notified by Dynex any  
product ordered will be supplied to the current version of the data sheet prevailing at the  
time of our order acknowledgement.  
All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request.  
Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their  
respective owners.  
HEADQUARTERS OPERATIONS  
CUSTOMER SERVICE  
DYNEX SEMICONDUCTOR LIMITED  
Doddington Road, Lincoln, Lincolnshire, LN6 3LF  
United Kingdom.  
Phone: +44 (0) 1522 502753 / 502901  
Fax:  
+44 (0) 1522 500020  
e-mail: power_solutions@dynexsemi.com  
Phone: +44 (0) 1522 500500  
Fax:  
+44 (0) 1522 500550  
Web: http://www.dynexsemi.com  
Dynex Semiconductor Ltd.  
Technical Documentation Not for resale.  
7/7  
www.dynexsemi.com  

相关型号:

DRD3390V40

Rectifier Diode
DYNEX

DRD3430C16

Rectifier Diode
DYNEX

DRD3430C18

Rectifier Diode
DYNEX

DRD3430C20

Rectifier Diode
DYNEX

DRD3430C22

Rectifier Diode
DYNEX

DRD3471539M00Z00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA

DRD3471539M20A00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA

DRD3471539M40A00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA

DRD3471539M40B00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA

DRD3471539U00B00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA

DRD3471539U20A00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA

DRD3471539U20B00T

Disc Type Dielectric Resonator, 1540MHz Min, 1670MHz Max
MURATA