DRD960G24 [DYNEX]
Rectifier Diode; 整流器器二极管
| 型号： | DRD960G24 |
| 厂家： | 
Dynex Semiconductor |
| 描述： | Rectifier Diode |
| 文件： | 总6页 (文件大小：294K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DRD960G34
Rectifier Diode
DS6008 – 1 March 2011 (LN28195)
KEY PARAMETERS
FEATURES
VRRM
IF(AV)
IFSM
3400V
960A
12000A
Double Side Cooling
High Surge Capability
VOLTAGE RATINGS
Part and
Ordering
Number
Repetitive Peak
Conditions
Voltages
VRRM
V
DRD960G34
DRD960G32
DRD960G30
DRD960G28
DRD960G26
DRD960G24
3400
3200
3000
2800
2600
2400
VRSM = VRRM+100V
(See Package Details for further information)
Fig. 1 Package outline
ORDERING INFORMATION
When ordering, select the required part number
shown in the Voltage Ratings selection table.
For example:
DRD960G34 for a 3400V device
1/6
www.dynexsemi.com
DRD960G34
CURRENT RATINGS
Tcase = 75°C unless stated otherwise
Symbol
Parameter
Test Conditions
Max.
Units
Double Side Cooled
IF(AV)
IF(RMS)
IF
Mean forward current
RMS value
Continuous (direct) on-state current
Half wave resistive load
1150
1810
1630
A
A
A
-
-
Tcase = 100°C unless stated otherwise
Symbol
Parameter
Test Conditions
Max.
Units
Double Side Cooled
IF(AV)
IF(RMS)
IF
Mean forward current
RMS value
Continuous (direct) on-state current
Half wave resistive load
960
1510
1360
A
A
A
-
-
SURGE RATINGS
Symbol
Parameter
Test Conditions
Max.
Units
IFSM
I2t
Surge (non-repetitive) on-state current
I2t for fusing
10ms half sine, Tcase = 175°C
VR = 0
12.0
0.72
kA
MA2s
2/6
www.dynexsemi.com
DRD960G34
THERMAL AND MECHANICAL RATINGS
Symbol
Parameter
Test Conditions
Double side cooled
Min.
Max.
Units
Rth(j-c)
Rth(c-h)
Tvj
Thermal resistance – junction to case
DC
DC
-
0.035
0.008
175
°C/W
°C/W
°C
Thermal resistance – case to heatsink Double side cooled
-
Virtual junction temperature
Storage temperature range
Clamping force
Blocking VDRM
/
-40
-40
12
VRRM
Tstg
175
°C
Fm
18
kN
CHARACTERISTICS
Units
Symbol
Parameter
Forward voltage
Test Conditions
Min.
Max.
VFM
IRM
At 1500A peak, Tcase = 25°C
At VDRM, Tcase = 175°C
IF = 1000A, dIRR/dt =10A/µs
Tcase = 175°C, VR =100V
At Tvj = 175°C
-
-
1.70
60
V
Peak reverse current
Total stored charge
mA
QS
-
3000
µC
VTO
rT
Threshold voltage
Slope resistance
-
-
0.88
0.45
V
At Tvj = 175°C
m
3/6
www.dynexsemi.com
DRD960G34
CURVES
9000
1600
1400
1200
1000
800
600
400
200
0
1/2 wave
3 phase
6 phase
8000
7000
6000
Tj=175°C
5000
4000
3000
2000
1000
0
0.5
1.5
2.5
3.5
4.5
0
200
400
600
800
1000
Instantaneous forward voltage,VF - (V)
Mean on-state current, IT(AV) - (A)
Fig.2 Maximum forward characteristics
Fig.3 Dissipation curves
13.0
12.0
11.0
10.0
9.0
0.09
Conditons:
Tcase=175°C
Double side cooled
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
VR=0
Pulse width = 10ms
8.0
7.0
6.0
5.0
4.0
0.001
0.01
0.1
1
10
100
1
10
100
Time ( s )
Number of cycles
Fig.4 Surge (Non-Repetitive) Forward current vs time
Fig.5 Maximum (limit) transient thermal impedance-
junction to case
4/6
www.dynexsemi.com
DRD960G34
PACKAGE DETAILS
For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
Package outline type code: G
Note:
Some packages may be supplied with gate and or tags.
5/6
www.dynexsemi.com
DRD960G34
IMPORTANT INFORMATION:
This publication is provided for information only and not for resale.
The products and information in this publication are intended for use by appropriately trained technical personnel.
Due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute
any guarantee of suitability for use in a specific application.The user must evaluate the suitability of the product and the completeness of
the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requirements
are met. Should additional product information be needed please contact Customer Service.
Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical
errors. The information is provided without any warranty or guarantee of any kind.
This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the
most up to date version and has not been superseded.
The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property.
The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or
malfunction.
The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use
protective safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnected any
electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves.
Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the
product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may include
potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. Appropriate application design
and safety precautions should always be followed to protect persons and property.
Product Status & Product Ordering:
We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for
production. The annotations are as follows:-
Target Information:
Preliminary Information:
No Annotation:
This is the most tentative form of information and represents a very preliminary specification.
No actual design work on the product has been started.
The product design is complete and final characterisation for volume production is in
progress.The datasheet represents the product as it is now understood but details may change.
The product has been approved for production and unless otherwise notified by Dynex any
product ordered will be supplied to the current version of the data sheet prevailing at the
time of our order acknowledgement.
All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request.
Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their
respective owners.
HEADQUARTERS OPERATIONS
CUSTOMER SERVICE
DYNEX SEMICONDUCTOR LIMITED
Doddington Road, Lincoln, Lincolnshire, LN6 3LF
United Kingdom.
Phone: +44 (0) 1522 502753 / 502901
Fax:
+44 (0) 1522 500020
e-mail: power_solutions@dynexsemi.com
Phone: +44 (0) 1522 500500
Fax:
+44 (0) 1522 500550
Web: http://www.dynexsemi.com
Dynex Semiconductor Ltd.
Technical Documentation – Not for resale.
6/6
www.dynexsemi.com
相关型号：
©2020 ICPDF网 联系我们和版权申明