MP03G440-20 [DYNEX]
Rectifier Diode, 1 Phase, 2 Element, 440A, 2000V V(RRM), Silicon, MP03, 3 PIN;型号: | MP03G440-20 |
厂家: | Dynex Semiconductor |
描述: | Rectifier Diode, 1 Phase, 2 Element, 440A, 2000V V(RRM), Silicon, MP03, 3 PIN 局域网 二极管 |
文件: | 总10页 (文件大小:101K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MP03 XX 440 Series
Dual Diode Modules
Replaces December 1998 version, DS5106-2.0
DS5106-3.0 January 2000
FEATURES
KEY PARAMETERS
VRRM
IFSM
IF(AV)(per arm)
Visol
2100V
11250A
440A
■ Dual Device Module
■ Electrically Isolated Package
■ Pressure Contact Construction
■ International Standard Footprint
■ Alumina (non-toxic) Isolation Medium
2500V
CIRCUIT OPTIONS
Code
Circuit
HB
APPLICATIONS
■ Rectifier Bridges
■ DC Power Supplies
■ Plating Rectifiers
■ Traction Systems
G
GN
VOLTAGE RATINGS
PACKAGE OUTLINE
Conditions
Type
Number
Repetitive
Peak
Voltages
VRRM
MP03/440 - 21
MP03/440 - 20
MP03/440 - 18
MP03/440 - 16
2100
2000
1800
1600
Tvj = 150oC
IRM = 30mA
VRSM = VRRM + 100V
respectively
Module outline type code: MP03.
See Package Details for further information.
Lower voltage grades available. For full description of part
number see "Ordering Instructions" on page 3.
CURRENT RATINGS - PER ARM
Parameter
Symbol
Conditions
Max.
440
390
340
Units
Tcase = 75oC
Tcase = 85oC
Theatsink = 75oC
Theatsink = 85oC
A
A
A
IF(AV)
Halfwave, resistive load
Tcase = 75oC
Mean forward current
300
690
A
A
IF(RMS)
RMS value
1/10
MP03 XX 440 Series
SURGE RATINGS - PER ARM
Parameter
Units
A
Symbol
Conditions
Max.
11250
VR = 0
10ms half sine;
IFSM
Surge (non-repetitive) on-state current
I2t for fusing
Tj = 150oC
A
VR = 50% VRRM
VR = 0
9000
A2s
630000
405000
10ms half sine;
Tj = 150oC
I2t
VR = 50% VRRM
A2s
THERMAL & MECHANICAL RATINGS
Parameter
Max.
0.12
0.13
0.14
Symbol
Conditions
Units
oC/W
dc
Rth(j-c)
Thermal resistance - junction to case
per Diode
halfwave
oC/W
oC/W
3 phase
Thermal resistance - case to heatsink
per Diode
Mounting torque = 5Nm
with mounting compound
oC/W
Rth(c-hs)
0.05
Tvj
Virtual junction temperature
Storage temperature range
150
oC
oC
-40 to 150
Tsto
Commoned terminals to base plate
AC RMS, 1min, 50Hz
Isolation voltage
Visol
2.5
kV
CHARACTERISTICS
Symbol
Parameter
Conditions
At 1000A , Tcase = 25oC
At VRRM, Tj = 150oC
Max.
Units
1.29
V
VFM
IRM
VTO
rT
Forward voltage
Peak reverse current
30
mA
V
At Tvj = 150oC
At Tvj = 150oC
0.94
0.32
Threshold voltage
On-state slope resistance
mΩ
2/10
MP03 XX 440 Series
ORDERING INSTRUCTIONS
Part number is made up as follows:
MP03 HB 440 - 18
MP = Pressure contact module
03
= Outline type
HB = Circuit configuration code (see "circuit options" - front page)
440 = Nominal average current rating at Tcase = 75oC
18
Examples:
MP03HB440 - 21
= VRRM/100
MP03G440 - 16
MP03GN440 - 18
Note: Prefered type is HB configuration. G and GN types are available for specific applications, only
when requested.
MOUNTING RECOMMENDATIONS
Adequate heatsinking is required to maintain the base An even coating of thermal compound (eg. Unial) should be
temperature at 75oC if full rated current is to be achieved. appliedtoboth theheatsinkandmodulemountingsurfaces.
Power dissipation may be calculated by use of VTOand rT This should ideally be 0.05mm (0.002") per surface to
information in accordance with standard formulae. We can ensure optimum thermal performance.
provide assistance with calculations or choice of heatsink
if required.
After application of thermal compound, place the module
squarely over the mounting holes, (or 'T' slots) in the
The heatsink surface must be smooth and flat; a surface heatsink. Using a torque wrench, slowly tighten the
finish of N6 (32µin) and a flatness within 0.05mm (0.002") recommended fixing bolts at each end, rotating each in turn
are recommended.
no more than 1/4 of a revolution at a time. Continue until the
required torque of 5Nm (44lb.ins) is reached at both ends.
Immediatelypriortomounting, theheatsinksurfaceshould
be lightly scrubbed with fine emery, Scotch Brite or a mild It is not acceptable to fully tighten one fixing bolt before
chemical etchant and then cleaned with a solvent to startingtotightentheothers.SuchactionmayDAMAGEthe
remove oxide build up and foreign material. care should be module.
taken to ensure no foreign particles remain.
3/10
MP03 XX 440 Series
Curves
2500
2000
1500
1000
500
Measured under pulse
conditions
Tj = 150˚C
0
0.5
1.0
1.5
2.0
2.5
Instantaneous forward voltage VF - (V)
Fig. 1 Maximum (limit) forward characteristics (Per diode)
0.15
0.10
0.05
d.c.
0
0.001
0.01
0.1
1.0
10
100
Time - (s)
Fig. 2 Transient thermal impedance (DC) - (Per diode)
4/10
MP03 XX 440 Series
30
25
20
15
10
5
420
400
380
360
340
320
300
I2t
0
1
10
1
2 3
cycles at 50Hz
Duration
5
10 20 30 50
ms
Fig. 3 Surge (non-repetitive) forward current vs time (with 0% VRRM, Tcase = 150˚C)
5/10
MP03 XX 440 Series
800
700
600
500
400
300
200
100
d.c.
180˚ Rectangular
180˚ Sine
120˚ Rectangular
60˚ Rectangular
0
0
100
200
300
400
500
600
700
Mean forward current - (A)
Fig. 4 On-state power loss per arm vs forward current at various conduction angles, 50/60Hz
160
140
120
100
80
60
40
20
0
0
100
200
300
400
500
700
600
Mean forward current - (A)
Fig. 5 Maximum permissible case temperature vs forward current per arm at various conduction angles, 50/60Hz
6/10
MP03 XX 440 Series
2000
1800
1600
1400
1200
1000
800
0.02
0.01 Rth(hs-a) ˚C/W
R - Load
0.04
L - Load
0.08
0.10
0.12
0.15
600
0.20
0.30
0.40
400
200
0
60
Maximum ambient temperature - (˚C)
0
20
40
80 100 120 140
0
200
400
800
600
D.C. output current - (A)
Fig. 6 50/60Hz single phase bridge dc output current vs power loss and maximum permissible ambient temperature for
various values of heatsink thermal resistance.
(Note: Rth(hs-a) values given above are true heatsink thermal resistances to ambient and already account for Rth(c-hs) module contact thermal).
7/10
MP03 XX 440 Series
2400
R & L - Load
0.02 0.01
Rth(hs-a) ˚C/W
2200
2000
0.04
1800
1600
1400
1200
1000
800
0.08
0.12
0.10
0.15
0.20
600
400
0.30
0.40
200
0
60
Maximum ambient temperature - (˚C)
0
20
40
80 100 120 140
0
250
500
1000
750
D.C. output current - (A)
Fig. 7 50/60Hz 3- phase bridge dc output current vs power loss and maximum permissible ambient temperature for various
values of heatsink thermal resistance.
(Note: Rth(hs-a) values given above are true heatsink thermal resistances to ambient and already account for Rth(c-hs) module contact thermal).
8/10
MP03 XX 440 Series
PACKAGE DETAILS
For further package information, please contact your local Customer Service Centre. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
42.5
35
28.5
4 holes Ø5.5
5
80
2
3
2x M8
1
92
Recommended fixings for mounting:
Recommended mounting torque:
M5 socket head cap screws.
5Nm (44lb.ins)
Recommended torque for electrical connections: 8Nm (70lb.ins)
Maximum torque for electrical connections:
Nominal weight: 950g
9Nm (80lb.ins)
Module outline type code: MP03
CIRCUIT CONFIGURATIONS
1
1
2
3
3
HB
2
G
1
2
3
GN
9/10
MP03 XX 440 Series
http://www.dynexsemi.com
e-mail: power_solutions@dynexsemi.com
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln.
Lincolnshire. LN6 3LF. United Kingdom.
Tel: 00-44-(0)1522-500500
CUSTOMER SERVICE CENTRES
France, Benelux, Italy and Spain Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 64 46 54 50
North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444
UK, Germany, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
SALES OFFICES
Fax: 00-44-(0)1522-500550
France, Benelux, Italy and Spain Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 64 46 54 50
Germany Tel: 07351 827723
DYNEX POWER INC.
Unit 7 - 58 Antares Drive,
Nepean, Ontario, Canada K2E 7W6.
Tel: 613.723.7035
Fax: 613.723.1518
Toll Free: 1.888.33.DYNEX (39639)
North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) /
Tel: (831) 440-1988. Fax: (831) 440-1989 / Tel: (949) 733-3005. Fax: (949) 733-2986.
UK, Germany, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
These offices are supported by Representatives and Distributors in many countries world-wide.
© Dynex Semiconductor 2000 Publication No. DS5106-3 Issue No. 3.0 January 2000
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
Datasheet Annotations:
Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:-
Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started.
Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.
Advance Information: The product design is complete and final characterisation for volume production is well in hand.
No Annotation: The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as
a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves
the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such
methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication
or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
10/10
相关型号:
MP03GN280-20
Rectifier Diode, 1 Phase, 2 Element, 280A, 2000V V(RRM), Silicon, MP03, 3 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明