E1125AA-125.000M-G [ECLIPTEK]
CRYSTAL OSCILLATOR, CLOCK, 125 MHz, ECL OUTPUT, DIP-14/4;型号: | E1125AA-125.000M-G |
厂家: | Ecliptek |
描述: | CRYSTAL OSCILLATOR, CLOCK, 125 MHz, ECL OUTPUT, DIP-14/4 机械 输出元件 振荡器 |
文件: | 总2页 (文件大小:73K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Marketing Bulletin
DATE: May 6, 2005
TO:
All Sales Personnel
FROM: Mark Stoner
RE:
E11 (OS/03) Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective May 1st, 2005:
Series
Description
Recommended Replacement
E11
5V 14 pin DIP ECL Oscillator
None
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after August 1st, 2005, with
delivery to conclude by November 1st 2005.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
STANDARD SPECIFICATIONS
Frequency Range:
6.000MHz to 155.520MHz
Frequency Tolerance/Stability:
(All Values Inclusive of Operating Temp. Range, Supply Voltage, and Load)
00
±100ppm Max.
45
±50ppm Max.
25
±25ppm Max. (0°C to +70°C only), (less than or equal to 125.000MHz only)
Operating Temperature Range
Blank
0°C to +70°C
ET
-40°C to +85°C
-55°C to +125°C
Storage Temperature Range
OBSOLETE
EE
Supply Voltage (V
Input Current
)
-5.2Vdc ±5% (AA, AB, and AM); +5.2Vdc ±5% (AC)
140mA Maximum
-1.0Vdc Min./-0.7Vdc Max. (AA, AB, and AM); 4.0Vdc Min./4.5VdcMax. (AC)
-1.95Vdc Min./-1.60Vdc Max. (AA, AB, and AM); 3.00Vdc Min./3.42Vdc Max. (AC)
2nSec Maximum (Measured at 20% to 80% of waveform)
50% ±10% (Measured at 50% of waveform)
Output Voltage Logic High
Output Voltage Logic Low
Rise/Fall Time
Duty Cycle
Load Drive Capability
Aging @ 25°C
50 Ohms into -2.0Vdc (AA, AB, and AM); 50 Ohms into +3.0Vdc (AC)
±5ppm/year Maximum
ENVIRONMENTAL & MECHANICAL
Fine Leak Test:
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
Solderability:
MIL-STD-883, Method 2002
Gross Leak Test:
Mechanical Shock:
Vibration:
Temperature Cycling:
Resistance to Soldering Heat:
Resistance to Solvents:
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
Lead Integrity:
PIN CONFIGURATIONS
PIN
1
7
AA
AB
AC
AM
Ground/Case
-5.2V
No Connect or Complementary Output
No Connect or Complementary Output
No Connect or Complementary Output
-5.2V
Output
Ground/Case
Output
Ground/Case
Output
8
Output
14
Ground
Ground/Case
+5.2Vdc
-5.2Vdc
PART NUMBERING GUIDE
E11 00 AM ET C - 24.000M - CL175
15.240
±0.203
0.9 MAX
7
Configuration Options
CLXXX = Cut Leads (MAL01-101-000)
G = Gull Wing (MAL01-001-000)
1
Frequency
7.620
±0.203
Pin 1 Connection
Blank = No Connect
Æ0.457
±0.1 (X4)
C = Complementary Output
Operating Temperature Range
Blank = 0°C to +70°C
8
14
ET = -40°C to +85°C
Pin Configuration
AA, AB, AC, or AM
Per Pin Configuration Table Above
5.08
MAX
13.2
MAX
Frequency Tolerance/Stability
00 = ±100ppm Maximum, 45 = ±50ppm Maximum
25 = ±25ppm Maximum
5.08
MIN
MARKING GUIDE
20.8 MAX
(Line #1) ECLIPTEK
(Line #2) E11 AM C
ALL DIMENSIONS
IN MILLIMETERS
Pin 1 Connection
Blank = No Connect
C = Complementary Output
SPECIFICATION CONTROL DRAWING
Drawing Number
Pin Configuration Per Pin Configuration Table Above
CSC01-010-000
(Line #3) XXX.XXXM
ECLIPTEK
E11AMC
XXX.XXXM
XXYZZ
Title
Frequency
FULL SIZE ECL OSCILLATOR
(Line #4) XX Y ZZ
Revision
Effectivity Date
Week of Year
08-27-03
Last Digit of Year
E
Ecliptek Manufacturing Code (TEN02-001-000)
ECN Number
PAGE 1 OF 2
8675
Released By
Date
Date
Approved By
NOTE: Pin 1 shall be marked with a black dot. Marking shall
conform to conditions listed in TQC41-001-000.
相关型号:
©2020 ICPDF网 联系我们和版权申明