E13C1F1C-155.520M [ECLIPTEK]
OSCILLATOR; 振荡器
| 型号： | E13C1F1C-155.520M |
| 厂家： | 
Ecliptek |
| 描述： | OSCILLATOR |
| 文件： | 总13页 (文件大小：936K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Marketing Bulletin
DATE: May 20, 2003
TO:
Affected Customers
FROM: Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the termination of the following Ecliptek series
effective May 14th, 2003:
Series
E11C1
E13C1
E11C2
E13C2
E31C2
E32C2
Description
Four Pad SMD PECL Oscillator, 5V
Four Pad SMD PECL Oscillator, 3.3V E13J1 or E13W1
Six Pad SMD PECL Oscillator, 5V
Six Pad SMD PECL Oscillator, 3.3V
Six Pad SMD PECL VCXO, 5V
Six Pad SMD PECL VCXO, 3.3V
Recommended Replacement
E11J1 or E11W1
E11J2 or E11W2
E13J2 or E13W2
E31J2 or E31W2
E32J2 or E32W2
Because of the circumstances surrounding this termination, there will be no end-of-life
policy exercised. The series will be terminated with no purchasing or lifetime buy
window available. All of us at Ecliptek Corporation apologize for any inconvenience this
may have caused and can assure you we are taking measures to insure this will not
happen again in the future.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE· COSTA MESA, CA 92626-1401 · (714) 433-1200 · Fax (714) 433-1234
E11C1 Series
• 5.0V supply voltage
E11C1
• PECL Output Oscillators
• 4 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
H 5.1
L 14.2
W 9.85
OSCILLATOR
NOTES
_______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
5.0VDC 5ꢀ
100mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
100ppm, 50ppm, 25ppm, or
20ppm Maximum
Output Voltage Logic High (VOH
)
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable, or
Complementary Output
Enables Output
Logic Control / Additional Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low,
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E11C1
CERAMIC
5.0V
OS65
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
152
PART NUMBERING GUIDE
E11C1 F 2 C - 155.520M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
C= 100ppm Maximum over 0°C to +70°C
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
G= 100ppm Maximum over -40°C to +85°C
H= 50ppm Maximum over -40°C to +85°C
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
DUTY CYCLE
1=50% 10%, 2=50% 5%
C=Complementary Output
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Tolerances = 0.1
Pin 1: Complementary Output, No Connect, or Enable/Disable
Pin 3: Output Pin 4: Supply Voltage
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seal Integrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 seconds
Frequency in MHz (5 Digits Maximum + Decimal)
Solrability
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Marng Permanency
OBSOLETE
Line 3: XX Y ZZ
Sho
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E11C1
CERAMIC
5.0V
OS65
10/02
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
153
E11C2 Series
• 5.0V supply voltage
E11C2
• PECL Output Oscillators
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
H
5.1
L 14.2
9.85
W
OSCILLATOR
NOTES
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
_______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
5.0VDC 5ꢀ
100mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
100ppm, 50ppm, 25ppm, or
20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
Duty Cycle
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable,
Complementary Output, or
Complementary Output and Enable/Disable
Enables Output
Logic Control / Additional Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E11C2
CERAMIC
5.0V
OS66
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
154
PART NUMBERING GUIDE
E11C2 F 2 C - 155.520M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
C= 100ppm Maximum over 0°C to +70°C
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
G= 100ppm Maximum over -40°C to +85°C
H= 50ppm Maximum over -40°C to +85°C
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
C=Complementary Output
D=Complementary Output and Enable/Disable
E=Complementary Output (Alt. Pin Configuration)
G=Complementary Output and Enable/Disable
(Alt. Pin Configuration)
DUTY CYCLE
1=50% 10%, 2=50% 5%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PIN CONNECTIONS TABLE
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seal Integrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 sends
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
Solderability
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% covege.
OBSOLETE
es.
Line 3: XX Y ZZ
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E11C2
CERAMIC
5.0V
OS66
10/02
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
155
E13C1 Series
• 3.3V supply voltage
E13C1
• PECL Output Oscillators
• 4 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
H
5.1
L 14.2
9.85
W
OSCILLATOR
NOTES
_______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
3.3VDC 5ꢀ
75mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
100ppm, 50ppm, 25ppm, or
20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
Duty Cycle
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable, or
Complementary Output
Enables Output
Logic Control / Additional Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disable Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E13C1
CERAMIC
3.3V
OS63
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
156
PART NUMBERING GUIDE
E13C1 F 2 C - 155.520M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
C= 100ppm Maximum over 0°C to +70°C
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
G= 100ppm Maximum over -40°C to +85°C
H= 50ppm Maximum over -40°C to +85°C
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
DUTY CYCLE
1=50% 10%, 2=50% 5%
C=Complementary Output
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Tolerances = 0.1
Pin 1: Complementary Output, No Connect, or Enable/Disable
Pin 3: Output Pin 4: Supply Voltage
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
eal Integrity
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 secds
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
OBSOLETE
olderability
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% covere.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Marking Permanency
Shock
Line 3: XX Y ZZ
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E13C1
CERAMIC
3.3V
OS63
10/02
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
157
E13C2 Series
• 3.3V supply voltage
E13C2
• PECL Output Oscillators
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
H
5.1
L 14.2
9.85
W
OSCILLATOR
NOTES
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
3.3VDC 5ꢀ
75mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
100ppm, 50ppm, 25ppm, or
20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
Duty Cycle
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable,
Complementary Output, or
Complementary Output and Enable/Disable
Enables Output
Logic Control / Additional Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E13C2
CERAMIC
3.3V
OS64
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
158
PART NUMBERING GUIDE
E13C2 F 2 C - 155.520M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
C= 100ppm Maximum over 0°C to +70°C
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
G= 100ppm Maximum over -40°C to +85°C
H= 50ppm Maximum over -40°C to +85°C
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
C=Complementary Output
D=Complementary Output and Enable/Disable
E=Complementary Output (Alt. Pin Configuration)
G=Complementary Output and Enable/Disable
(Alt. Pin Configuration)
DUTY CYCLE
1=50% 10%, 2=50% 5%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PIN CONNECTIONS TABLE
SUGGESTED
SOLDER PAD
LAYOUT
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seal Igrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 seconds
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
Solderility
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% coverage.
OBSOLETE
MarkiPermanency
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Line 3: XX Y ZZ
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E13C2
CERAMIC
3.3V
OS64
10/02
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
159
E31C2 Series
• 5.0V supply voltage
E31C2
• PECL Output VCXO
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
H 5.1
L 14.2
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
W 9.85
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 83.333MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
5.0VDC 5ꢀ
OBSOLETE
Loadꢁ and Aging @25°C over 10 years
Input Current
100mA Maximum
100KH
Logic Type
Frequency Tolerance / Stability
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppmꢁ 25ppmꢁ or
20ppm Maximum
Output Voltage Logic High (VOH
)
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect and Single Output
Enable/Disable and Single Output
No Connect and Complementary Output or
Enable/Disable and Complementary Output
Enables Output
Additional Output / Logic Control
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
Absolute Pull Range (APR)
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppm Minimum
Loadꢁ and Aging @25°C over 10 years
Linearity
20ꢀꢁ 15ꢀꢁ or 10ꢀ Maximum
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Center Control Voltage
Transfer Function
2.5VDC 2.0VDC
0.0VDC to VCC
2.5VDC
Positive Transfer Characteristic
50kOhms Typical
10kHz Minimum
Input Impedance
Modulation Bandwidth
at -3dB with Control Voltage of +2.5VDC
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E31C2
CERAMIC
5.0V
OS68
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
188
PART NUMBERING GUIDE
E31C2 F 3 A 2 C - 77.760M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
H= 50ppm Maximum over -40°C to +85°C
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
APR
3= 50ppm Minimum
LINEARITY
A=20%
B=15%
DUTY CYCLE
1=50 10(%), 2=50 5(%)
C=10%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Voltage Control
Pin 2: Enable/Disable or No Connect
Pin 3: Case Ground
Pin 4: Output
Pin 5: Complementary Output or No Connect
Pin 6: Supply Voltage
Tolerances = 0.1
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seal Integrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 seconds
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
olderability
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% covera.
OBSOLETE
arking Permanency
10 Strokes with brush after 1 minute soak in solvent, 3 tim.
Line 3: XX Y ZZ
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E31C2
CERAMIC
5.0V
OS68
10/02
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
189
E32C2 Series
• 3.3V supply voltage
E32C2
• PECL Output VCXO
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
H
5.1
L 14.2
9.85
W
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 83.333MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
3.3VDC 5ꢀ
OBSOLETE
Loadꢁ and Aging @25°C over 10 years
Input Current
75mA Maximum
100KH
Logic Type
Frequency Tolerance / Stability
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppmꢁ 25ppmꢁ or
20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
Duty Cycle
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect and Single Output
Enable/Disable and Single Output
No Connect and Complementary Output or
Enable/Disable and Complementary Output
Enables Output
Additional Output / Logic Control
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
Absolute Pull Range (APR)
Inclusive of Operating Temp Rangeꢁ Supply Voltageꢁ 50ppm Minimum
Loadꢁ and Aging @25°C over 10 years
Linearity
20ꢀꢁ 15ꢀꢁ or 10ꢀ Maximum
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Center Control Voltage
Transfer Function
1.65VDC 1.35VDC
0.0VDC to VCC
1.65VDC
Positive Transfer Characteristic
50kOhms Typical
10kHz Minimum
Input Impedance
Modulation Bandwidth
at -3dB with Control Voltage of +1.65VDC
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E32C2
CERAMIC
3.3V
OS67
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
190
PART NUMBERING GUIDE
E32C2 F 3 A 2 C - 77.760M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
D= 50ppm Maximum over 0°C to +70°C
E= 25ppm Maximum over 0°C to +70°C
F= 20ppm Maximum over 0°C to +70°C
H= 50ppm Maximum over -40°C to +85°C
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
APR
3= 50ppm Minimum
LINEARITY
A=20%
B=15%
DUTY CYCLE
1=50 10(%), 2=50 5(%)
C=10%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Voltage Control
Pin 2: Enable/Disable or No Connect
Pin 3: Case Ground
Pin 4: Output
Pin 5: Complementary Output or No Connect
Pin 6: Supply Voltage
Tolerances = 0.1
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
M
1.5 MIN
N
50 MIN
T
O
20.2 MIN
U
P
13 .2
V
Q
A
24 .3
B
C
D
.2
E
2 .1
F
REEL
40 MIN
QTY/REEL
1000
11.5 .1 10.75 .1
4
R
S
F
G
B0*
H
J
A0*
K
L
K0*
2.5 MIN
30.4 MAX 360 MAX 24.4+2-0
10 MIN
12 .1
1.5 +.1-0
.4 .05
*Compliant to EIA 481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
MARKING SPECIFICATIONS
Characteristic
Seantegrity
Specification
Line 1: ECLIPTEK
Line 2: XX.XXX M
Bubble test in Perfluorocarbon at +125°C 5°C for 60 seconds
minimum (internal crystal only).
Frequency in MHz (5 Digits Maximum + Decimal)
Solrability
Sn63 Solder dip at +230°C 5°C for 5 seconds/95% coverage.
OBSOLETE
Mang Permanency
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Line 3: XX Y ZZ
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
E32C2
CERAMIC
3.3V
OS67
10/02
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
191
相关型号：
©2020 ICPDF网 联系我们和版权申明