EB13E2F2H-36.000MTR [ECLIPTEK]
CRYSTAL OSCILLATOR, CLOCK, CMOS OUTPUT;
| 型号： | EB13E2F2H-36.000MTR |
| 厂家： | 
Ecliptek |
| 描述： | CRYSTAL OSCILLATOR, CLOCK, CMOS OUTPUT 输出元件 |
| 文件： | 总11页 (文件大小：802K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
Log On | 714-433-1200 | Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EB13E2 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)
2011/65 +
168 SVHC
2015/863
Revision O 12/05/2014
ectrical Specifications
Nominal Frequency
1.024MHz to 66.6666MHz
Some frequencies within this range may not be available.
requency Tolerance/Stability
(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency
Stability over the Operating Temperature Range, Supply Voltage
Change, Output Load Change, First Year Aging at 25°C, Shock, and
Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Operating Temperature Range
-20°C to +70°C
-40°C to +85°C
upply Voltage (V
nput Current
)
DD
3.3V
±5%
DC
Click to Open Input Current Table
Output Voltage Logic High (V
)
OH
I
= -4mA
OH
90% of V
Minimum
Maximum
DD
Output Voltage Logic Low (V
Duty Cycle
)
I
= +4mA
OL
OL
10% of V
DD
Measured at 50% of waveform
50 ±5(%)
ise Time/Fall Time
Output Logic Type
Click to Open Rise/Fall Time Table
CMOS
oad Drive Capability
torage Temperature Range
in 1 Connection
15pF Maximum
-55°C to +125°C
Tri-State (High Impedance)
ri-State Input Voltage (V
MS Phase Jitter
and V
)
80% of V
Minimum or No Connect to Enable Output, 20% of V
DD DD
IH
IL
Maximum to Disable Output (High Impedance)
Fj = 12kHz to 20MHz
1pSec Maximum
tart Up Time
10mSec Maximum
tandby Current
Disabled Output: High Impedance
10µA Maximum
1 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
put Current
Nominal Frequency Range
Input Current
3mA Maximum
4mA Maximum
5mA Maximum
6mA Maximum
9mA Maximum
1.024MHz to 9.999999MHz
10MHz to 19.999999MHz
20MHz to 39.999999MHz
40MHz to 50MHz
50.000001MHz to 66.6666MHz
2 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
se/Fall Time
asured at 20% to 80% of Waveform
Nominal Frequency Range
1.024MHz to 24MHz
Rise/Fall Time
5nSec Maximum
4nSec Maximum
3nSec Maximum
24.000001MHz to 50MHz
50.000001MHz to 66.6666MHz
3 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
echanical Dimensions
Dimensions in Millimeters
1: Tri-State
2: Case/Ground
3: Output
4: Supply Voltage
arking Specifications
e 1:
EXXXX
E = Ecliptek Designator
XXXX = Nominal Frequency in MHz (3 Digits + Decimal)
e 2:
XXXXX
XXXXX = Ecliptek Manufacturing Identifier
4 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
vironmental and Mechanical Specifications
D Susceptibility
e Leak Test
MIL-STD-883, Method 3015, Class 1, HBM:1500V
MIL-STD-883, Method 1014, Condition A
UL94-V0
mmability
oss Leak Test
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 1004
chanical Shock
isture Resistance
isture Sensitivity
sistance to Soldering Heat
sistance to Solvents
lderability
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
mperature Cycling
bration
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 2007, Condition A
40°C/W (degrees Celsius per Watt)
ermal Resistance (θ
ermal Resistance (θ
)
)
JA
JC
14°C/W (degrees Celsius per Watt)
5 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
pe & Reel Dimensions
00 pieces per reel
mpliant to EIA-481
Dimensions in Millimeters
6 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
MOS Test Circuit
te 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency ceramic bypass
pacitor close to the package ground and V pin is required.
DD
te 2: A low input capacitance (<12pF), 10X Attentuation Factor, High Impedance (>10Mohms), and High bandwidth
300MHz) passive probe is recommended.
te 3: Capacitance value C includes sum of all probe and fixture capacitance. See applicable specification sheet for ‘Load
L
ve Capability’.
7 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
commended Solder Pad Dimensions
erances = ±0.1
Dimensions in Millimeters
8 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
lder Reflow Profile
h Temperature Infrared/Convection
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
3°C/second Maximum
L
eheat
Temperature Minimum (T MIN)
150°C
S
Temperature Typical (T TYP)
175°C
S
Temperature Maximum (T MAX)
200°C
S
Time (t )
60 - 180 Seconds
3°C/second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
217°C
L
Time (t )
60 - 150 Seconds
260°C Maximum for 10 Seconds Maximum
250°C +0/-5°C
L
ak Temperature (T )
P
rget Peak Temperature (T Target)
P
me within 5°C of actual peak (t )
P
20 - 40 seconds
mp-down Rate
6°C/second Maximum
8 minutes Maximum
Level 1
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
9 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
w Temperature Infrared/Convection
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
5°C/second Maximum
L
eheat
Temperature Minimum (T MIN)
N/A
S
Temperature Typical (T TYP)
150°C
S
Temperature Maximum (T MAX)
N/A
S
Time (t )
60 - 120 Seconds
5°C/second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
150°C
L
Time (t )
200 Seconds Maximum
L
ak Temperature (T )
240°C Maximum
P
rget Peak Temperature (T Target)
240°C Maximum 2 Times / 230°C Maximum 1 Time
10 seconds Maximum 2 Times / 80 seconds Maximum 1 Time
P
me within 5°C of actual peak (t )
P
mp-down Rate
5°C/second Maximum
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
N/A
Level 1
h Temperature Manual Soldering
te: Temperatures listed are applied to body of device.
0°C Maximum for 5 seconds Maximum, 2 times Maximum.
w Temperature Manual Soldering
te: Temperatures listed are applied to body of device.
5°C Maximum for 10 seconds Maximum, 2 times Maximum.
10 of 11
28-Jan-2016 12:57 PM
Ecliptek | EB13E2 Series Oscillator
http://www.ecliptek.com/oscillators/EB13E2/
- Build A Part Number
2 - Next Page
Select the parameters that meet your requirements and then click
Access these Part Number specific
resources and tools
Next
requency in Megahertz
(1.024 to 66.6666):
Some frequencies within this
range may not be available
Frequency
Tolerance/Stability:
Packaging Options:
rt Numbering Guide
TOOLS
PRODUCT
ECLIPTEK
TERMS
Quick Quote
Crystals
Authorized Distributors
Contact
Privacy Policy
Terms of Sale
Legal
SmartSearch
Oscillators
Compliance Documents
Chipset Cross Reference
Competitor Cross Reference
Part Search
REACH Resources
RoHS Resources
End of Life
About
News
Our Quality
ISO9001
Feedback
11 of 11
28-Jan-2016 12:57 PM
相关型号：
EB13E2F2H-6.144M
CMOS, Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)
ECLIPTEK
EB13E2F2H-7.500M
CMOS, Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)
ECLIPTEK
EB13E2F2H-9.600M
CMOS, Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD)
ECLIPTEK
©2020 ICPDF网 联系我们和版权申明