ECXO-2196-36.000M [ECLIPTEK]
OSCILLATORS -10+70 1.8V 4 36.000MHZ CMOS 5.0X3.2MM 4PAD SMD;型号: | ECXO-2196-36.000M |
厂家: | Ecliptek |
描述: | OSCILLATORS -10+70 1.8V 4 36.000MHZ CMOS 5.0X3.2MM 4PAD SMD |
文件: | 总4页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHS
Pb
ECXO-2196-36.000M
PLEASE NOTE: Due to the inherent proprietary nature of custom part numbers, certain parameters
are intentionally excluded from this specification sheet.
ECXO-2196 -36.000M
Series
Nominal Frequency
Ecliptek Custom Oscillator
36.000MHz
ELECTRICAL SPECIFICATIONS
Nominal Frequency
36.000MHz
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Method 210
Gross Leak Test
Mechanical Shock
Resistance to Soldering Heat
Resistance to Solvents
Solderability
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
Temperature Cycling
Vibration
MIL-STD-883, MEthod 1010
MIL-STD-883, Method 2007, Condition A
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
1
2
3
4
Tri-State
Case Ground
Output
1.20 ±0.20 (x4)
3.20
±0.20
1.00 ±0.20 (x4)
Supply Voltage
LINE MARKING
4
3
1
2
1
2
ECXO2196
5.00
±0.20
2.54
±0.15
1.20
±0.20
(x4)
XXYZZ
XX=Ecliptek Manufacturing
Designator
Y=Last Digit Of Year
ZZ=Week of Year
2.20
±0.15
1.3
MAX
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 2/17/2010 | Page 1 of 4
ECXO-2196-36.000M
Suggested Solder Pad Layout
All Dimensions in Millimeters
1.2 (X4)
1.4 (X4)
Solder Land
(X4)
1.14
1.0
All Tolerances are ±0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 2/17/2010 | Page 2 of 4
ECXO-2196-36.000M
Recommended Solder Reflow Methods
Critical Zone
TL to TP
TP
Ramp-up
Ramp-down
TL
TS Max
TS Min
tL
tP
tSPreheat
t 25°C to Peak
Time (t)
High Temperature Infrared/Convection
TS MAX to TL (Ramp-up Rate)
3°C/second Maximum
Preheat
- Temperature Minimum (TS MIN)
- Temperature Typical (TS TYP)
- Temperature Maximum (TS MAX)
- Time (tS MIN)
150°C
175°C
200°C
60 - 180 Seconds
Ramp-up Rate (TL to TP)
3°C/second Maximum
Time Maintained Above:
- Temperature (TL)
- Time (tL)
217°C
60 - 150 Seconds
Peak Temperature (TP)
260°C Maximum for 10 Seconds Maximum
250°C +0/-5°C
Target Peak Temperature (TP Target)
Time within 5°C of actual peak (tp)
Ramp-down Rate
20 - 40 seconds
6°C/second Maximum
8 minutes Maximum
Level 1
Time 25°C to Peak Temperature (t)
Moisture Sensitivity Level
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 2/17/2010 | Page 3 of 4
ECXO-2196-36.000M
Recommended Solder Reflow Methods
Critical Zone
TL to TP
TP
Ramp-up
Ramp-down
TL
TS Max
TS Min
tL
tP
tSPreheat
t 25°C to Peak
Time (t)
Low Temperature Infrared/Convection 240°C
TS MAX to TL (Ramp-up Rate)
5°C/second Maximum
Preheat
- Temperature Minimum (TS MIN)
- Temperature Typical (TS TYP)
- Temperature Maximum (TS MAX)
- Time (tS MIN)
N/A
150°C
N/A
60 - 120 Seconds
Ramp-up Rate (TL to TP)
5°C/second Maximum
Time Maintained Above:
- Temperature (TL)
- Time (tL)
150°C
200 Seconds Maximum
Peak Temperature (TP)
240°C Maximum
Target Peak Temperature (TP Target)
Time within 5°C of actual peak (tp)
Ramp-down Rate
240°C Maximum 1 Time / 230°C Maximum 2 Times
10 seconds Maximum 2 Times / 80 seconds Maximum 1 Time
5°C/second Maximum
Time 25°C to Peak Temperature (t)
Moisture Sensitivity Level
N/A
Level 1
Low Temperature Manual Soldering
185°C Maximum for 10 seconds Maximum, 2 times Maximum.
High Temperature Manual Soldering
260°C Maximum for 5 seconds Maximum, 2 times Maximum.
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 2/17/2010 | Page 4 of 4
相关型号:
ECXO-2224-15.000M
OSCILLATORS 2.5PPM -30+85 3.0V 15.000MHZ CLIPPED SINEWAVE 5.0X3.2MM 4PAD SMD
ECLIPTEK
ECXO-2230-20.000M TR
OSCILLATORS 2.5PPM -10+60 3.0V 20.000MHZ CLIPPED SINEWAVE 5.0X3.2MM 4PAD SMD
ECLIPTEK
©2020 ICPDF网 联系我们和版权申明