EP1400SJETPDL-50.250MTR [ECLIPTEK]
CRYSTAL OSCILLATOR, CLOCK, TTL OUTPUT;型号: | EP1400SJETPDL-50.250MTR |
厂家: | Ecliptek |
描述: | CRYSTAL OSCILLATOR, CLOCK, TTL OUTPUT 输出元件 |
文件: | 总9页 (文件大小:939K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
Log On | 714-433-1200 | Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EP14 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
2011/65 +
168 SVHC
2015/863
Revision F 03/25/2014
ectrical Specifications
Nominal Frequency
1.000MHz to 125.000MHz
Some frequencies within this range may not be available.
requency Tolerance/Stability
(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency
Stability over the Operating Temperature Range, Supply Voltage
Change, Output Load Change, First Year Aging at 25°C, Shock, and
Vibration)
±100ppm Maximum
±50ppm Maximum
Operating Temperature Range
-20°C to +70°C
-40°C to +85°C
upply Voltage (V
nput Current
)
DD
5.0V
±10%
DC
45mA Maximum (Unloaded)
Output Voltage Logic High (V
)
OH
2.4V
Minimum with TTL Load, V -0.4V
DD
Minimum with HCMOS
DC
DC
Load, IOH = -16mA
Output Voltage Logic Low (V
uty Cycle
)
0.4V
Maximum, IOL = +16mA
DC
OL
Measured at 1.4V
with TTL Load; Measured at 50% of waveform
DC
with HCMOS Load
50 ±10(%)
50 ±5(%) (Not available with Output Logic Type of TTL over Nominal
Frequency of 27.000001MHz to 125MHz; Not available with Output
Logic Type of CMOS over Nominal Frequency range of 50.000001MHz
to 125MHz)
ise Time/Fall Time
oad Drive Capability
4nSec Maximum (Measured at 20% to 80% of waveform) at Output
Logic Type of CMOS
4nSec Maximum (Measured at 0.8V
to 2.0V ) at Output Logic Type
DC
DC
of TTL
50pF HCMOS Load Maximum over Nominal Frequency of 1MHz to
50MHz at Output Logic Type of CMOS
15pF HCMOS Load Maximum over Nominal Frequency of
50.000001MHz to 125MHz at Output Logic Type of CMOS
10TTL Load Maximum over Nominal Frequency of 1MHz to 40MHz at
Output Logic Type of TTL
5TTL Load Maximum over Nominal Frequency of 40.000001MHz to
125MHz at Output Logic Type of TTL
Output Logic Type
in 1 Connection
CMOS
TTL
Power Down (Disable Output: Logic Low)
Tri-State (Disabled Output: High Impedance
ri-State Input Voltage (Vih and Vil)
tandby Current
+2.0V
Minimum to enable output, +0.8V Maximum to disable
DC
DC
output, No Connect to enable output.
50µA Maximum (Pin 1 = Ground)
1 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
Disable Current
30mA Maximum (Pin 1 = Ground)
bsolute Clock Jitter
±250pSec Maximum, ±100pSec Typical over Nominal Frequency of
1MHz to 33MHz
±100pSec Maximum, ±50pSec Typical over Nominal Frequency of
33.000001MHz to 125MHz
One Sigma Clock Period Jitter
±50pSec Maximum over Nominal Frequency of 1MHz to 33MHz
±30pSec Maximum over Nominal Frequency of 33.000001MHz to
125MHz
ging (at 25°C)
±5ppm/year Maximum
-55°C to +125°C
torage Temperature Range
tart Up Time
10mSec Maximum
2 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
echanical Dimensions
Dimensions in Millimeters
1: Power Down (Logic Low) or Tri-State (High Impedance)
2: Ground
Pin 3: Output
Pin 4: Supply Voltage
arking Specifications
e 1:
e 2:
ECLIPTEK
XXXXXXM
XXXXXX = Nominal Frequency (5 Digits + Decimal)
M = Frequency unit of measure (MHz)
e 3:
XXXXX
XXXXX = Ecliptek Manufacturing Identifier
3 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
vironmental and Mechanical Specifications
e Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Method 210
oss Leak Test
chanical Shock
sistance to Soldering Heat
sistance to Solvents
lderability
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
mperature Cycling
bration
MIL-STD-883, Method 1010
MIL-STD-883, Method 2007, Condition A
81°C/W (degrees Celsius per Watt)
31°C/W (degrees Celsius per Watt)
ermal Resistance (θ
ermal Resistance (θ
)
)
JA
JC
4 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
pe & Reel Dimensions
00 pieces per reel
mpliant to EIA-481
Dimensions in Millimeters
5 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
L Test Circuit
te 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency ceramic bypass
pacitor close to the package ground and V pin is required.
DD
te 2: A low input capacitance (<12pF), 10X Attentuation Factor, High Impedance (>10Mohms), and High bandwidth
300MHz) passive probe is recommended.
te 3: Capacitance value C includes sum of all probe and fixture capacitance.
L
te 4: Resistance value R is shown in Table I. See applicable specification sheet for ‘Load Drive Capability’.
L
te 5: All diodes are MMBD7000, MMBD914, or equivalent.
MOS Test Circuit
te 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency ceramic bypass
pacitor close to the package ground pin is required.
te 2: A low input capacitance (<12pF), 10X Attentuation Factor, High Impedance (>10Mohms), and High bandwidth
300MHz) passive probe is recommended.
te 3: Capacitance value includes sum of all probe and fixture capacitance. See applicable specification sheet for ‘Load
ve Capability’.
6 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
commended Solder Pad Dimensions
erances = ±0.1
Dimensions in Millimeters
7 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
lder Reflow Profile
w Temperature Infrared/Convection
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
5°C/second Maximum
L
eheat
Temperature Minimum (T MIN)
N/A
S
Temperature Typical (T TYP)
150°C
S
Temperature Maximum (T MAX)
N/A
S
Time (t )
60 - 120 Seconds
5°C/second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
150°C
L
Time (t )
200 Seconds Maximum
L
ak Temperature (T )
240°C Maximum
P
rget Peak Temperature (T Target)
240°C Maximum 2 Times / 230°C Maximum 1 Time
P
me within 5°C of actual peak (t )
P
10 seconds Maximum 2 Times / 80 seconds Maximum 1 Time
mp-down Rate
5°C/second Maximum
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
N/A
Level 1
h Temperature Manual Soldering
te: Temperatures listed are applied to body of device.
0°C Maximum for 5 seconds Maximum, 2 times Maximum.
w Temperature Manual Soldering
te: Temperatures listed are applied to body of device.
5°C Maximum for 10 seconds Maximum, 2 times Maximum.
8 of 9
28-Jan-2016 2:01 PM
Ecliptek | EP14 Series Oscillator
http://www.ecliptek.com/oscillators/EP14/
- Build A Part Number
2 - Next Page
Select the parameters that meet your requirements and then click
Next
Access these Part Number specific
resources and tools
Frequency in
egahertz (1 to 125):
me frequencies within this
ange may not be available
Frequency
Tolerance/Stability:
Operating
Temperature Range:
Duty Cycle:
Pin 1 Connection:
Output Logic Type:
Packaging Options:
rt Numbering Guide
TOOLS
PRODUCT
ECLIPTEK
TERMS
Quick Quote
Crystals
Authorized Distributors
Contact
Privacy Policy
Terms of Sale
Legal
SmartSearch
Oscillators
Compliance Documents
Chipset Cross Reference
Competitor Cross Reference
Part Search
REACH Resources
RoHS Resources
End of Life
About
News
Our Quality
ISO9001
Feedback
9 of 9
28-Jan-2016 2:01 PM
相关型号:
EP1400SJETPDL-51.200M
TTL, Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
ECLIPTEK
EP1400SJETPDL-53.125M
TTL, Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
ECLIPTEK
EP1400SJETPDL-53.125MTR
CRYSTAL OSCILLATOR, CLOCK, 53.125MHz, TTL OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
ECLIPTEK
EP1400SJETPDL-54.000MTR
CRYSTAL OSCILLATOR, CLOCK, 54MHz, TTL OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
ECLIPTEK
EP1400SJETPDL-6.023229M
TTL, Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
ECLIPTEK
EP1400SJETPDL-62.608M
TTL, Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
ECLIPTEK
EP1400SJETPDL-65.536M
TTL, Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD) Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc J-Lead 9.8mm x 14.0mm Plastic Surface Mount (SMD)
ECLIPTEK
©2020 ICPDF网 联系我们和版权申明