EQUD2AE2E8-14.400M [ECLIPTEK]
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD);型号: | EQUD2AE2E8-14.400M |
厂家: | Ecliptek |
描述: | Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) 石英晶振 压控振荡器 有源晶体振荡电路 |
文件: | 总11页 (文件大小:870K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
Log On | 714-433-1200 | Email Customer Support
Home
Products
Quick Quote
My Parts List
Site Map
Contact Us
EQUD2A Series Oscillator
Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm
x 5.0mm Ceramic Surface Mount (SMD)
2011/65 +
168 SVHC
2015/863
Revision B 03/30/2015
ectrical Specifications
Nominal Frequency
10.000MHz to 30.000MHz
Some frequencies within this range may not be available.
requency Stability
Inclusive of Operating Temperature Range, At V =5.0V
DD
and
DC
V =1.5V
C
DC
±3.0ppm Maximum
±2.5ppm Maximum
±2.0ppm Maximum
±1.5ppm Maximum
±1.0ppm Maximum
requency Stability vs. Frequency
olerance
±1.0ppm Maximum (at 25°C ±2°C, at V =5.0V
DD
Pre-Reflow)
and V =1.5V
,
DC
DC
C
requency Stability vs. Input Voltage
requency Stability vs. Load
±0.2ppm Maximum (±5%)
±0.2ppm Maximum (±1kOhm//±1pF)
requency Stability vs. Reflow
requency Stability vs. Aging
Operating Temperature Range
±1.0ppm Maximum (at 25°C, 1 Hour after Reflow, 2 Times)
±1.0ppm/year Maximum (at 25°C)
0°C to +50°C
-10°C to +60°C
0°C to +70°C
-20°C to +70°C
-30°C to +60°C
-30°C to +75°C
-30°C to +85°C
-40°C to +85°C
upply Voltage
nput Current
Output Voltage
5.0V
±5%
DC
2.0mA Maximum
External DC-Cut capacitor required, 1000pF recommended
1.0Vp-p Clipped Sinewave Minimum
oad Drive Capability
Output Logic Type
ontrol Voltage
10kOhms//10pF
Clipped Sinewave
1.5V
±1.0V
DC
DC
requency Deviation
inearity
±8ppm Minimum
10% Maximum
ransfer Function
Modulation Bandwidth
nput Impedance
Positive Transfer Characteristic
10kHz Minimum at -3dB
1Mohm Minimum
1 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
hase Noise
All Values are Typical
-80dBc/Hz at 10Hz offset
-115dBc/Hz at 100Hz offset
-135dBc/Hz at 1kHz offset
-148dBc/Hz at 10kHz offset
MS Phase Jitter
Fj=12kHz to 20MHz (Random)
1pSec Maximum
tart Up Time
5mSec Maximum
-40°C to +85°C
torage Temperature Range
2 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
echanical Dimensions
Dimensions in Millimeters
1: Control Voltage
2: Case/Ground
3: Output
4: Supply Voltage
arking Specifications
e 1:
EXXXXXX
E = Ecliptek Designator
XXXXXX = Nominal Frequency in MHz (5 digits + Decimal)
e 2:
XXXXX
XXXXX = Ecliptek Manufacturing Identifier
3 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
vironmental and Mechanical Specifications
D Susceptibility:
e Leak Test:
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
MIL-STD-883, Method 1014, Condition A
UL94-V0
mmability:
oss Leak Test:
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 1004
chanical Shock:
isture Resistance:
isture Sensitivity:
sistance to Soldering Heat:
sistance to Solvents:
lderability:
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
mperature Cycling:
bration:
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 2007, Condition A
40°C/W (degrees Celsius per Watt)
ermal Resistance (θ ):
JA
ermal Resistance (θ ):
JC
14°C/W (degrees Celsius per Watt)
4 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
pe & Reel Dimensions
00 pieces per reel
mpliant to EIA-481
Dimensions in Millimeters
5 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
st Circuit for Clipped Sinewave Output
te 1: An external 0.01µF bypass capacitor in parallel with a 0.1µF high frequency ceramic bypass capacitor close (less
n 2mm) to the package ground and supply voltage pin is required.
te 2: A low input capacitance (<12pF), 10X Attentuation Factor, High Impedance (>10Mohms), and High bandwidth
300MHz) passive probe is recommended.
te 3: Capacitance value C includes sum of all probe and fixture capacitance.
L
6 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
commended Solder Pad Dimensions
erances = ±0.1
Dimensions in Millimeters
7 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
lder Reflow Profile
8 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
h Temperature Infrared/Convection
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
3°C/Second Maximum
L
eheat
Temperature Minimum (T MIN)
150°C
S
Temperature Typical (T TYP)
175°C
S
Temperature Maximum (T MAX)
200°C
S
Time (t )
60 - 180 Seconds
3°C/Second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
217°C
L
Time (t )
60 - 150 Seconds
L
ak Temperature (T )
260°C Maximum for 10 seconds Maximum
250°C +0/-5°C
P
rget Peak Temperature (T Target)
P
me within 5°C of actual peak (t )
P
20 - 40 Seconds
mp-down Rate
6°C/Second Maximum
8 Minutes Maximum
Level 1
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
9 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
w Temperature Infrared/Convection 240°C
te: Temperatures shown are applied to body of
vice.
MAX to T (Ramp-up Rate)
5°C/Second Maximum
L
eheat
Temperature Minimum (T MIN)
N/A
S
Temperature Typical (T TYP)
150°C
S
Temperature Maximum (T MAX)
N/A
S
Time (t )
60 - 120 Seconds
5°C/Second Maximum
S
mp-up Rate (T to T )
L
P
me Maintained Above:
Temperature (T )
150°C
L
Time (t )
200 Seconds Maximum
L
ak Temperature (T )
240°C Maximum
P
rget Peak Temperature (T Target)
240°C Maximum 2 Times / 230°C Maximum 1 Time
10 Seconds Maximum 2 Times / 80 Seconds Maximum 1 Time
P
me within 5°C of actual peak (t )
P
mp-down Rate
5°C/Second Maximum
me 25°C to Peak Temperature (t)
oisture Sensitivity Level
N/A
Level 1
h Temperature Manual Soldering
te: Temperatures listed are applied to body of device.
0°C Maximum for 5 Seconds Maximum, 2 times Maximum.
w Temperature Manual Soldering
te: Temperatures listed are applied to body of device.
5°C Maximum for 10 Seconds Maximum, 2 times Maximum.
10 of 11
28-Jan-2016 2:39 PM
Ecliptek | EQUD2A Series Oscillator
http://www.ecliptek.com/oscillators/EQUD2A/
- Build A Part Number
2 - Next Page
Select the parameters that meet your requirements and then click
Access these Part Number specific
resources and tools
Next
Frequency in Megahertz (10 to 30):
Some frequencies within this range may not be
available
Operating Temperature Range:
Frequency Stability:
Packaging Options:
rt Numbering Guide
TOOLS
PRODUCT
ECLIPTEK
TERMS
Quick Quote
Crystals
Authorized Distributors
Contact
Privacy Policy
Terms of Sale
Legal
SmartSearch
Oscillators
Compliance Documents
Chipset Cross Reference
Competitor Cross Reference
Part Search
REACH Resources
RoHS Resources
End of Life
About
News
Our Quality
ISO9001
Feedback
11 of 11
28-Jan-2016 2:39 PM
相关型号:
EQUD2AE2G8-16.000M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD2AE3G8-19.440M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD2AE4F8-12.800M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD2AE5G8-25.000M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
EQUD2AE7E8-14.400M
Clipped, Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) Temperature Compensated Voltage Controlled Quartz Crystal Clock Oscillators TCVCXO Clipped Sinewave 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)
ECLIPTEK
©2020 ICPDF网 联系我们和版权申明