STUS06H - STUS5D0
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
SMA (DO-214AC)
±
1.1 0.3
FEATURES :
* 500W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
±
0.2 0.07
±
1.2 0.2
* Fast response time : typically less
then 1.0 ps from 0 volt to VBR(min.)
±
2.1 0.2
±
2.6 0.15
m
* Typical IR less then 1 A above 10V
±
2.0 0.2
MECHANICAL DATA
Dimensions in millimeter
* Case : SMA Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.064 grams
DEVICES FOR BIPOLAR APPLICATIONS
For bi-directional altered the third letter of type from "U" to be "B".
Electrical characteristics apply in both directions
MAXIMUM RATINGS
°
Rating at 25 C ambient temperature unless otherwise specified.
Rating
Symbol
PPK
Value
500
Unit
Watts
Watts
°
Peak Power Dissipation at Ta = 25 C, Tp=1ms (Note1)
°
Steady State Power Dissipation at TL = 75 C (Note 2)
PD
3.0
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
IFSM
70
Amps.
J, STG
T T
°
C
Operating and Storage Temperature Range
- 55 to + 150
Note :
°
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1
(2) Mounted on copper Lead area at 5.0 mm2 ( 0.013 mm thick ).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum.
UPDATE : JULY 13, 1998