1933-A-A-SA-02-N [EMCORE]
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4;型号: | 1933-A-A-SA-02-N |
厂家: | EMCORE CORPORATION |
描述: | DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4 PC |
文件: | 总7页 (文件大小:230K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY DATASHEET| AUGUST 17, 2007
Model 1933 1310 nm CATV Coaxial DFB Laser
Diode
Emcore’s Model 1933 DFB lasers offer a low cost solution for linear
fiberoptic links. These components can be cooled with external thermo-
electric coolers for high stability, or run without TEC’s to reduce power
consumption. The DFB laser builds upon Ortel’s long history of high
performance, leading edge designs in CATV, wireless, and high speed
digital applications. The laser diode devices are packaged in a compact
hermetic assembly together with monitor photodiode and isolator, for
flexible integration into various transmitter configurations.
Applications
ꢀVideo signal distribution in
HFC and FTTx nodes
ꢀHigh linearity, low power fiber
links
Performance Highlights
Features
Min
Typical
Max
Units
ꢀLinear DFB laser design
Operating Case Temperature Range
Minimum Optical Output Power
0
-
45
°C
ꢀOutput power > 8 mW available
ꢀBandwidth > 2700 MHz
ꢀRoHS compliance
2
4
8
-
-
-
-
-
-
mW
ꢀOptical Isolator
Frequency Range
40
51
-
-
2700
-
MHz
dB
ꢀLow power consumption
ꢀMonitor photodiode
Carrier-to-Noise Ratio (79 channels)
-
-
-
-
-53
-57
Composite Second Order (79 channels)
Composite Triple Beat (79 channels)
dBc
dBc
-
-
-
-
-63
-65
Center Wavelength
Optical Return Loss
1300
35
-
-
1320
-
nm
dB
Side Mode Suppression Ratio, CW
30
-
-
dB
See following pages for complete specifications and conditions.
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
Model 1933 1310 nm CATV Coaxial DFB
Laser Diode
PRELIMINARY DATASHEET| AUGUST 17, 2007
Absolute Maximum Ratings1
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in
excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect device reliability.
Parameters
Symbol
TSTG
TOP
IOP
Condition/Notes
Non-Operating
Continuous
CW
MIN
MAX
85
Unit
oC
Storage Temperature
-40
Operating Case Temperature
Laser Diode Forward Current
Laser Diode Reverse Voltage
Photodiode Forward Current
Photodiode Reverse Voltage
Average RF Input Power
Lead Soldering Temperature/Time
Relative Humidity
-40
85
oC
-
100
1.0
2
mA
V
VR
Continuous
Continuous
Continuous
60 Seconds
-
-
IMPD
VMPD,R
PIN
-
-
mA
V
-
10
-
62
dBmV
-
-
260/10 oC/sec
RH
Continuous
Human Body Model
85
%
V
ESD
-
-500
+500
1. Absolute maximum data are limited to system design only; proper device performance is not guaranteed over rating listed above. Operation
beyond these maximum conditions may degrade device performance, lead to device failure, shorter lifetime, and will invalidate the device
warranty.
EMCORE CORPORATION
Model 1933 1310 nm CATV Coaxial DFB
Laser Diode
PRELIMINARY DATASHEET| AUGUST 17, 2007
Electrical/Optical Characteristics
Parameters
Symbol
Tcase
Conditions/Notes
Min
0
Typ
-
Max
45
Unit
ºC
Operating Case Temperature1
-
2 mW version
4 mW version
8 mW version
2
4
8
3
6
9
4
8
-
Minimum Optical Output Power
PO
mW
Tcase = 25ºC
Tcase = 45ºC
-
-
8
13
15
20
Threshold Current
ITH
mA
Laser Bias Current
Forward Voltage
Laser Input Impedance
MPD Current
TOP
VF
0ºC < Tcase < 45ºC
-
-
-
1.0
4
85
1.2
8
mA
V
Iop
Z
-
2
Ω
μA
IMPD
VMPD = 5V, Iop = 60 mA
200
-
800
VMPD = 5V, Iop = 0
Tcase = 25ºC
MPD Dark Current
ID
λc
-
1300
-
-
-
-
50
nA
Center Wavelength
Relative Intensity Noise
Iop
1320
nm
CW, Iop,
50 MHz < f < 550 MHz
RIN
-145 dB/Hz
Optical Isolation
ISO
Δλ
SMSR
ORL
0ºC < Tcase < 45ºC
30
-
-
0.1
45
-
-
1.0
-
dB
nm
dB
dB
Spectral Width (-20 dB)
Side Mode Suppression Ratio
Optical Return Loss
Iop
Iop
30
35
Tcase = 25ºC
-
1. Referenced to base of TO header.
RF Characteristics
Parameters
Symbol
Conditions/Notes
Min
Typ
Max
Unit
Bandwidth3 dB
BW
Iop, Tcase = 25ºC
2700
-
-
MHz
40 MHz < f < 1000 MHz
950 MHz < f < 2700 MHz
-
-
-
-
1
3
Frequency Response Flatness1
Carrier-to-Noise Ratio2,3
|S21|
CNR
CSO
dBp-p
dB
Iop
51
-
-
-
-
-
-
-53
-57
Composite Second Order2,3
Iop
dBc
-
-
-
-
-63
-65
Composite Triple Beat2,3
CTB
Iop
dBc
1. Iop, Tcase = 25°C.
2. 3.2% OMI, 79 NTSC unmodulated carriers (50 MHz to 550 MHz). 0 km fiber.
3. Received power = 0 dBm.
3
EMCORE CORPORATION
Model 1933 1310 nm CATV Coaxial DFB
Laser Diode
PRELIMINARY DATASHEET| AUGUST 17, 2007
Package Outline Drawing
Mounting Bracket
4
EMCORE CORPORATION
Model 1933 1310 nm CATV Coaxial DFB
Laser Diode
PRELIMINARY DATASHEET| AUGUST 17, 2007
Reliability/Quality
Designed to meet qualification requirements of TelcordiaTM (Bellcore) GR-468-CORE.
Schematic and Pinout
3
PD
4
LD
2
1
Pinout A
Pin Definitions
Pin
Description
1
2
3
4
LD Anode, Case Ground
LD Cathode
PD Cathode
PD Anode
5
EMCORE CORPORATION
Model 1933 1310 nm CATV Coaxial DFB
Laser Diode
PRELIMINARY DATASHEET| AUGUST 17, 2007
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH
Class IIIb laser product. This device has been classified with the FDA/CDRH under accession number TBD.
Single-mode fiber pigtail with SC/APC connectors (standard).
Wavelength = 1.3 μm.
Maximum power = 50 mW.
Because of size constraints, laser safety labeling (including an FDA class IIIb label) is not affixed to the module,
but attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
INVISIBLE LASER RADIATION
Avoid direct exposure to beam
AVOIDDIRECT EXPOSURE TO BEAM
Do not view beam directly with
μ
Wavelength: 1.3 m
Max. Output:50mW,
Class IIIb Laser Product
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBEROR CONNECTOR
Avoi d exposure to beam
μ
Class 3B Laser Product IEC-60825 1993 Max. Output:50mW Wavelength: 1.3 m
6
EMCORE CORPORATION
Model 1933 1310 nm CATV Coaxial DFB
Laser Diode
PRELIMINARY DATASHEET| AUGUST 17, 2007
Ordering Code Definitions
1933-w-x-yy-zz-v
Family Name
1933
Distortion Performance
w = A: Standard Linearity
w = B: High Linearity
Pinout
x = A: Pinout A
Fiber Length, Optical Connector
yy = FA: FC/APC, 900 micron buffer, 1.0 – 1.4 meter
yy = SA: SC/APC, 900 micron buffer, 1.0 – 1.4 meter
Optical Output Power
zz = 02: 2 mW
zz = 04: 4 mW
zz = 08: 8 mW
Mounting Bracket
v = B: Mounting Bracket
v = N: No Mounting Bracket
Example
1933-B-A-S11-04: 1933, High Linearity, Pinout A, SC/APC optical connector, 1.0 – 1.4 meter fiber pigtail, 900 micron fiber
buffer, 4 mW optical power
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
EMCORE CORPORATION
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
ds.1933
© Copyright 2007. EMCORE Corporation
相关型号:
1933-A-A-SA-03-B
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Panel Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-A-A-SA-04-B
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Panel Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-A-A-SA-06-N
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-A-A-SA-08-B
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Panel Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-FA-02-N
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, FC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-FA-03-B
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, FC/APC Connector, Panel Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-FA-06-N
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, FC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-FA-08-B
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, FC/APC Connector, Panel Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-FA-09-N
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, FC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-SA-02-B
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Panel Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-SA-02-N
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
1933-B-A-SA-03-N
DFB Laser Diode Emitter, 1300nm Min, 1320nm Max, SC/APC Connector, Through Hole Mount, ROHS COMPLIANT PACKAGE-4
EMCORE
©2020 ICPDF网 联系我们和版权申明