2522C-SSD-DC-100-SA [EMCORE]
PIN Photodiode, HERMETIC SEALED PACKAGE;
| 型号： | 2522C-SSD-DC-100-SA |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | PIN Photodiode, HERMETIC SEALED PACKAGE 光电 |
| 文件： | 总5页 (文件大小：170K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATASHEET| JULY 26, 2007
2522 Microwave Packaged Photodiode
The 2522 packaged photodiode incorporates a high-speed planar
PIN photodiode to provide a highly reliable, high-power photodiode
component. This package is well suited for receiver applications
with optical preamplification. The diode is well matched over the
operating frequency band, thereby simplifying high-speed
integration.
Applications
ꢀOptically amplified systems
(following EDFA or Raman
amplifiers)
Performance Highlights
Min
-40
15
0.7
-
Typ
Max
+85
21
-
Units
°C
Operating Temperature
Bandwidth
25
-
ꢀLinear receiver applications
GHz
A/W
nA
dB
ps
ꢀFEC and Super-FEC to 12.5
Gb/s
Responsivity, 1550 nm
Dark Current25C
-
-
5
Features
RF Return Loss
8
12
-
-
ꢀHighly reliable planar
photodiode technology
Group Delay
-10
1280
15
-
30
1580
-
ꢀHigh power capability
ꢀdc coupled
Optical Wavelength Range
Breakdown Voltage (IR = 10 μA)
Optical Return Loss
Photodiode Bias Voltage
-
nm
V
-
ꢀHigh breakdown voltage
ꢀBandwidth up to 21 GHz
-
-40
12
dB
V
-
5
ꢀGood RF matching, 12 dB
typical
ꢀHermetically sealed
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
2522 Microwave Packaged Photodiode
Absolute Maximum Ratings
DATASHEET| JULY 26, 2007
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in
excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
+85
+85
+10
5
Unit
°C
Operating Case Temperature Range
Storage Case Temperature Range
Optical Input Power
Top
Tstg
PIN
IF
-40
-40
°C
-
-
-
-
-
-
mW
mA
V
Forward Current
Reverse Bias Voltage
VR
-
15
Lead Soldering Temperature/Time
Relative Humidity (non-condensing)
ESD Susceptibility (all pins)1
250/5
85
°C/sec
%
RH
-
+500
V
1. Based on human-body model of R = 1500 W, C = 100 pF. In general, ESD precautions should be taken to avoid damage.
Electrical/Optical Characteristics1
Parameter
Symbol
Condition
Min
-40
-
Typ
Max
Unit
°C
Operating Temperature
Bias Voltage
Top
VR
C
Referenced to base of package
25
5
-
85
12
-
V
Capacitance
-
-
0.15
-
pF
Responsivity
R
1550 nm
0.7
-
A/W
25°C
85°C
-
-
-
-
5
50
Dark Current
Idark
nA
Optical Return Loss
Wavelength
ORL
-
-
-
-
-
-40
dB
1280
1580
nm
λ
1. Specified characteristics apply for the recommended operating conditions at beginning of life, 25°C, unless noted otherwise.
2
EMCORE CORPORATION
2522 Microwave Packaged Photodiode
RF Characteristics1
DATASHEET| JULY 26, 2007
Parameter
Bandwidth
Impedance
Symbol
Condition
Min
15
-
Typ
-
Max
Unit
GHz
Ω
f3dB
Z
Relative to 100 MHz
-
-
Resistively matched SMA connector
50
At 2 GHz
-1
-1
-2
-3
-
-
-
-
+3
+3
+3
+3
At 15 GHz, 15 GHz option
At 18 GHz, 18 GHz option
At 21 GHz, 21 GHz option
S21 Flatness2
-
dB
0.5 GHz to 15 GHz, 15 GHz option
0.5 GHz to 18 GHz, 18 GHz option
0.5 GHz to 21 GHz, 21 GHz option
Group Delay Flatness3
Output RF Return Loss
GD
-10
8
-
-
+30
-
ps
DC to 15 GHz, 15 GHz option
DC to 18 GHz, 18 GHz option
DC to 21 GHz, 21 GHz option
RLRF
dB
1. Specified characteristics apply for the recommended operating conditions at beginning of life, 25°C, unless noted otherwise.
2. Measured relative to 250 MHz.
3. 5% smoothing, relative to 2 GHz.
Pinout
Pin
Symbol
Function
1
2
Vpd
GND
Photodiode Bias
Case Ground
3
EMCORE CORPORATION
2522 Microwave Packaged Photodiode
DATASHEET| JULY 26, 2007
Outline Drawing
Dimensions are in inches.
100 cm + 10 cm
Conn
4
EMCORE CORPORATION
2522 Microwave Packaged Photodiode
DATASHEET| JULY 26, 2007
Ordering Information – Model Number Options
2522x-yyy-zz-aaa-bb
Bandwidth
A – 15 GHz
B – 18 GHz
C – 21 GHz
RF Connector
SMA – SMA connector (standard)
SSD – SSMD connector
RF Coupling
AC – AC-coupled
DC – DC-coupled (standard)
Fiber Length
100 – 1.00 + 0.1 meters
Optical Connector
SU – SC/UPC
SA – SC/APC
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
EMCORE CORPORATION
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
© Copyright 2007. EMCORE Corporation
ds.2522
相关型号：
©2020 ICPDF网 联系我们和版权申明