6000-0SE3-11001
更新时间：2024-09-18 12:50:59
品牌：EMCORE
描述：Medallion 6000 Series 1550 nm Externally-Modulated Transmitter
概述
数据手册6000-0SE3-11001 概述
Medallion 6000 Series 1550 nm Externally-Modulated Transmitter 勋章6000系列1550nm的外调制发射机
6000-0SE3-11001 数据手册
通过下载6000-0SE3-11001数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
The L-Type/D-Type/S-Type/F-Type/N-Type Medallion 6000 Series
The Medallion 6000 series is a family of state-of-the-art high-performance 1550
nm externally-modulated CATV fiber optic transmitters optimized for varying
network applications. Packaged in convenient 1 RU housing, this line of optical
transmitters couples high optical output powers, up to 11.0 dBm, with low optical
linewidth resulting in unmatched performance. The optical modulator, combined
with proprietary pre-distortion circuitry, provides superior CTB and CSO
performance with SBS suppression levels of greater than 21 dBm. Advanced
features such as built-in field adjustable SBS control and electronic dispersion
compensation allow these transmitters to be quickly optimized in the field for any
link or application without the need to procure specifically tuned transmitters. This
affords the system designer a level of flexibility previously unknown in the CATV
market place.
Applications
High-Performance Supertrunking Links
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
RFoG Applications
SAT-IF Transport
The L-Type series are designed as a high-performance solution for applications
where the simultaneous transport of CATV and SAT-IF FM signals is required.
The SAT-IF signals can be applied anywhere in the 950 to 2800 MHz band.
DWDM Node Splitting
Features
The D-Type series are designed as a low cost, high-performance solution for
applications where the required fiber length is in the range of 20 to 50 kilometers.
Advanced, high power, DFB laser technology allows these transmitters to be
fielded without the use of EDFAs.
Single or Dual Optical Outputs
QAM Loading to 1003 MHz
Dual Power Supplies, Redundant &
Hot Swappable
The S-Type series transmitters are designed to be the most versatile models
within the Medallion 6000 series family. They can easily be configured to meet
most HFC network solutions requiring link lengths in the range of 50 to 70
kilometers with one EDFA as well as links utilizing multiple EDFA’s.
Front Panel RF Test Point
SNMP Control Interface
WEB GUI
The F-Type series transmitters are intended for use in FTTx and RFoG
architecture designs requiring high-quality transmission over varying transmission
lengths and EDFA output powers. These transmitters successfully support very
high optical launch powers while controlling the detrimental effects of Stimulated
Brillouin Scattering (SBS), group velocity dispersion (GVD), and self phase
modulation (SPM).
Vacuum Fluorescent Status Display
OMI / RF Gain Adjustment
AGC Select: CW, Video, Manual
(No AGC)
Industry Leading Field Adjustable
SBS Suppression
The N-Type series transmitters are intended for use in node-splitting architecture
designs requiring cost effective DWDM transmission over medium length fiber
distances.
Field Adjustable Electronic
Dispersion Compensation (EDC)
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
Optical / Electrical Characteristics
L-Type
Property
Performance (Note 1-8)
Specified Link Length
Units
Models
6000-L02 6000-L03
Comments
6000-L01
6000-L04
L (km)
25
25
25
25
With 36 QPSK carriers
from 950 to 2800 MHz
Channel Plan
NTSC 80-Ch
8.5/8.5
PAL 60-Ch
NTSC 110-ch
PAL 89-Ch
8.5/8.5
Min. 10 dBm version
avail. See Chart
Optical Output Power
Po (dBm)
8.5/8.5
8.5/8.5
Noise Bandwidth
BW (MHz)
(dBm)
4
5
4
5
SBS Suppression
15.0
51.0
-65
-65
-64
27
15.0
51.0
-65
-65
-64
27
15.0
49.5
-65
-65
-64
27
15.0
49.5
-65
-65
-64
27
Min.
CATV Carrier to Noise Ratio
CATV Composite Second Order
CATV Composite Triple Beat
CATV Composite Triple Beat
SAT-IF Carrier to Noise Ratio
SAT-IF Intermodulation Products
SAT-IF Spurious Products
CNR (dB)
CSO (dBc)
CTB (dBc)
CTB (dBc)
CNR (dB)
(dBc)
Min.
Max. Port 1
Max. @ +25°C
Max. @ 0oC to 50oC
Min.
-35
-38
-35
-38
-35
-38
-35
-38
Max. Port 1
Max.
(dBc)
D-Type
Property
Performance (Note 1-7)
Specified Link Length
Channel Plan
Units
Models
Comments
6000-D01
6000-D02
6000-D03
6000-D04
L (km)
40
40
40
40
NTSC 80-Ch
PAL 60-Ch
11.0
5
NTSC 110-ch
PAL 89-Ch
11.0
5
Optical Output Power
Noise Bandwidth
Po (dBm)
BW (MHz)
(dBm)
11.0
4
11.0
4
Min.
SBS Suppression
> 12.0
54.0
-65
>12.0
54.0
-65
>12.0
51.0
-65
>12.0
51.0
-65
Min.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
Composite Triple Beat
CNR (dB)
CSO (dBc)
CTB (dBc)
CTB (dBc)
Min.
Max.
-65
-65
-65
-65
Max. @ +25°C
Max. @ 0oC to 50oC
-64
-64
-64
-64
S-Type
Property
Performance (Note 1-7)
Specified Link Length
Channel Plan
Units
Models
Comments
6000-SA1
6000-SA2
6000-SA3
65
6000-SA4
65
6000-SA5
65
L (km)
65
65
NTSC 80
PAL 60
NTSC 110
PAL 89
42 CENELEC
Min. - Higher Powers
Available See Chart
Optical Output Power
Po (dBm)
7.0/ 7.0
7.0/ 7.0
7.0/ 7.0
7.0/ 7.0
7.0/ 7.0
Noise Bandwidth
BW (MHz)
(dBm)
4
5
4
5
5
SBS Suppression
16.0
16.0
16.0
16.0
16.0
Min.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
CNR (dB)
53.0/ 53.0
53.0/ 53.0
-65/ -65
-65
50.0/ 50.0
-65/ -65
-65
50.0/ 50.0
-65/ -65
-65
53.0/ 53.0
-65/ -65
-65
Min.
CSO (dBc) -65/ -65
Max.
CTB (dBc)
-65
Max. @ +25°C
Composite Triple Beat
CTB (dBc)
-64
-64
-64
-64
-64
Max. @ 0oC to 50oC
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
F-type
Property
Performance (Note 1-7)
Specified Link Length
Units
Models
6000-F03
Comments
6000-F01
6000-F02
6000-F04
L (km)
20
20
20
20
Channel Plan
NTSC 80-Ch PAL 60-Ch
NTSC 110-ch
PAL 89-Ch
7.0/ 7.0
5
Optical Output Power
Noise Bandwidth
Po (dBm)
BW (MHz)
(dBm)
7.0/ 7.0
4
7.0/ 7.0
5
7.0/ 7.0
4
Min.
SBS Suppression
21.0
48.0
-58
21.0
48.0
-58
21.0
45.0
-58
21.0
Min.
Min.
Max.
Max.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
CNR (dB)
CSO (dBc)
CTB (dBc)
45.0
-58
-58
-58
-58
-58
N-Type
Property
Performance (Note 1-7)
Specified Link Length
Units
Models
6000-N02
Comments
6000-N01
L (km)
40
40
Channel Plan
NTSC 80-Ch
PAL 60-Ch
9.5
Optical Output Power
Noise Bandwidth
Po (dBm)
BW (MHz)
(dBm)
9.5
4
Min.
5
SBS Suppression
13.0
52.0
-62
-62
-61
13.0
52.0
-62
Min.
Min.
Max.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
CNR (dB)
CSO (dBc)
CTB (dBc)
CTB (dBc)
-62
Max. @ +25°C
Max. @ 0oC to 50oC
Composite Triple Beat
Notes:
-61
1. Unless stated otherwise all specifications apply over full temperature range with no digital loading.
2. Unless stated otherwise specifications apply for nominal RF input level as defined below, after a 30 minute stabilization period.
3. Specifications separated by a slash are port1 / port 2.
4. Units are tested per the Test / Link Configuration Table
5. Noise figure for the EDFA = 4.5 ~ 5.5 dB
6. Corning SMF-28 single mode fiber
7. Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2
8. With 36 QPSK modulated SAT-IF signals between 950 …2800 MHz. 27 MHz IF bandwidth
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
General and Mechanical Specifications
Property
Requirement
Comments
Various Options + ITU-grid available – see
Model Number Information
Wavelength
1550 +/-5 nm
Channel Plan
Various – See Specification Tables
SC/APC
Custom channel plans available
Other styles available
Optical Connector
100 Base-T Ethernet (SNMP)
Rear Panel RS-232 interface
VFD Screen Front Panel Controls
Monitoring Interfaces
VFD- (Vacuum Fluorescent Display)
Operating Temperature
Storage Temperature
Power Consumption
0°C to 50°C
-20°C to 70°C
65 W max
EMI:
Safety:
EN50083-2:2006 (US CATV)
EN55022:2006 (US IT)
EN61000-3-2 (Harmonics)
EN61000-3-3 (Flicker)
FCC: Part 15, Subpart B, class “A” Unintentional Radiators
ICES-003 (Canada)
AN/NZS 3548, Class A (Australia)
VCCI, Class A (Japan)
FDA/CDRH Laser Safety Governed by Code
of Federal Regulations Title 21, Volume 8,
Part 1040
IEC 60950-1
IEC 60728-11
Agency Listings
Laser IEC 60825-1
CB Certification
Transportation Vibration
Transportation Shock
Operating Humidity
GR-2853-CORE
GR-2853-CORE
In Shipping package
In Shipping package
Non-condensing
20% to 85%
Supply Range
(VAC)
90 to 265 VAC, 50/60 Hz
(width includes 19” front panel ears, depth
includes, connectors, fans & front panel) –
see drawing
Dimensions
19.0”W x 15.0”D x 1.72”H
Input Power Range
17 +/-1 dBmV/ch 80 NTSC channels
15 +/-1 dBmV/ch 110 NTSC channels
18 +/-1 dBmV/ch 60 PAL channels
20 +/-1 dBmV/ch 42 CENELEC channels
16 +/-1 dBmV/ch 89 PAL channels
27 +/-1 dBmV/ch SAT-IF channels
19 +/-2 dBmV/ch 80 NTSC channels
17 +/-2 dBmV/ch 110 NTSC channels
20 +/-2 dBmV/ch 60 PAL channels
18 +/-2 dBmV/ch 89 PAL channels
22 +/-2 dBmV/ch 42 CENELEC channels
29 +/-2 dBmV/ch SAT-IF channels
Manual mode
Manual mode
Manual mode
Manual mode
Manual mode
Manual mode
CW mode
Input Power Range
CW mode
CW mode
CW mode
CW mode
AGC mode
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
General and Mechanical Specifications (continued)
Property
Requirement
Comments
Front Panel RF Gain / OMI Adjustment Range
+2 / -4 dB from nominal setting
CATV Performance can vary slightly
CATV Frequency Range
CATV Flatness
45 MHz – 1003 MHz
+/- 0.50 dB
45 MHz – 550 MHz
+/- 0.75 dB
45 MHz – 1003 MHz
CATV Flatness – N-Type
CATV Input impedance
+/- 0.75 dB
45 MHz – 1003 MHz N-Type
75 Ω
CATV Input Return Loss
CATV Front Panel RF Tap
CATV Front Panel RF Tap Flatness
SAT-IF Frequency Range
SAT-IF Flatness
16 dB min
45 MHz – 1003 MHz
45 MHz – 1003 MHz
-20 +/- 1 dB down from RF input
+/- 1 dB
950 MHz – 2800 MHz
+/- 2 dB
SAT-IF Input impedance
SAT-IF Input Return Loss
SAT-IF Front Panel RF Tap
SAT-IF Front Panel RF Tap Flatness
75 Ω
10 dB min
950 MHz – 2800 MHz
950 MHz – 2800 MHz
7 +/- 2.5 dBmV/Ch at 1% OMI/ch
+/- 1 dB
Test/Link Configuration
Property
EDFA
25 Km
40 Km
65 Km
20 Km
40 Km
Link1
Received Power2
0.0 dBm at the receiver
0.0 dBm at the receiver
0.0 dBm at the receiver
-5.5 dBm at the receiver
0.0 dBm at the receiver
L-Type
D-Type
S-Type
F-Type
N-Type
15 dBm
None
16 dBm
21 dBm
13 dBm
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
Outline Drawing (Dimensions in inches)
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class 1M
laser product. During use as intended, the laser energy is fully contained within the fiber network
such that there is no accessible laser radiation. This product has been issued accession number 0820466-001.
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
Model Number Information (note 3)
6000 – □ □ □ □
-
□ □ □ □ □
Logo &
Customer
Specific
Wavelength
Link type
Pout (dBm min) Note 1
Loading Type
Optics
RF
Power Supply
(nm)
0 –
EMCORE
Logo
1 – RF
00 –1555+/-
5.0nm
1 – AC primary,
no secondary
D – 40 km
0 – for D, and F-Types
A – 7.0/7.0 for S-Type
1 – NTSC (80-ch)
1 – SC/APC, Rear IN Rear,
TP Front
2 – RF
IN Front,
TP Front
2 – PAL
(60-ch)
01 – 1550+/-
5.0nm
2 – DC primary,
no secondary
1 – no Logo S – 65 km
2 – FC/APC, Rear
xx – ITU
3 – RF
IN Front,
TP Rear
3 – E2000/APC,
Rear
3 – AC primary,
AC secondary
Channel +/-
B – 8.0/8.0 for S-Type
C – 10.0 for S-Type
3 – NTSC (110-ch)
Note 2
0.1nm
4 – RF
IN Rear,
TP Rear
F – FTTx
SBS 20 dBm
4 – SC/APC,
Front
4 – AC primary,
DC secondary
4 – PAL (89-ch)
5 – Not Used
D- 10/10 for S & L-Type
5 – DC primary,
DC secondary
L – 25 km
N – 40 km
5 – FC/APC, Front
Note 4
6 – CENELEC (42-
6 – E2000/APC,
Front
ch)
E – 8.5/8.5 for L Type
Note 5
Note 1: Options available for Indicated Types only.
Note 2: ITU grid wavelengths can be specified from channel 18 to 40.
Note 3: Not all configurations are available, contact factory.
Note 4: Available for S and L Links. CSO port 2 degraded by 1dB for Channel Loads 1 and 2, CSO port 2 degraded by 2 dB for Channel
Loads 3 and 4.
Note 5: Contact Factory for Model type availability
Additional Kits
G3708-006-001 - Replaceable AC power supply modules
G3708-005-001 - Replaceable DC power supply modules
G7914-076-001 - Replaceable Blank power module plate
G3906-008-001 - Replaceable fans
|
REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
6000-0SE3-11001 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 6000-0SE4-11001 | EMCORE | Medallion 6000 Series 1550 nm Externally-Modulated Transmitter | 获取价格 |
|
| 6000-0SE4-62001 | EMCORE | Single or Dual Optical Outputs | 获取价格 |
|
| 6000-0SE5-11001 | EMCORE | Medallion 6000 Series 1550 nm Externally-Modulated Transmitter | 获取价格 |
|
| 6000-100K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
| 6000-101K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
| 6000-102K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
| 6000-103K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
| 6000-120K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
| 6000-121K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
| 6000-122K-RC | BOURNS | Radial Lead RF Chokes | 获取价格 |
|
6000-0SE3-11001 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
