6000-OS3-2240 [EMCORE]
Optical A/B Switch; 光A / B切换
| 型号： | 6000-OS3-2240 |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | Optical A/B Switch |
| 文件： | 总2页 (文件大小：239K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EOS-6000 Optical A/B Switch
DATASHEET | OCTOBER 2012
FIBER OPTICS
The EOS-6000 Optical A/B Switch is a high-performance solution for network
protection and optical redundancy. Packaged in convenient 1RU housing, this line of
optical switches provides an automatic or manual fiber switching function to protect the
network from inadvertent service outages due to up-stream optical signal degradation.
Each fiber’s optical signal power level is continuously monitored, as is an adjustable
optical trip threshold for each channel. If the primary fiber’s optical signal power level
falls below the desired optical trip threshold, the unit automatically switches to the
secondary fiber, thus eliminating the need for intervention of a system operator. The
EOS-6000 is capable of manual switching or can be switched remotely via SNMP
adding optical protection to many system applications.
Applications
Fiber Optical Protection Switching
Redundant Ring Architectures
FTTx Networks
The EOS-6000 series is designed as a low power, cost-effective, high-performance
switching solution for applications that demand reliable and rapid response to
changing network conditions
Features
Automatic, Manual and Remote
Switching
Auto-Switching Time Less than 25ms
SNMP Control Interface
Figure 1: Redundant Path Configuration for CATV Broadcast
Front Panel LED Indicators
Medallion 6000
MAIN
RF In
1 RU Rack-Mount Enclosure with Choice
of AC or DC Power Supply
CATV Tx (Main)
NMOA8100/8200
EOS-6000
…
To WDM & PONs
EDFA
Optical Switch
BACKUP
Medallion 6000
RF In
CATV Tx (Backup)
Optical Characteristics
Property
Operating Wave Length
Insertion Loss
Units
Min.
Typ.
Max.
Nm
dB
dB
dB
dB
1310 +/- 10 or 1550 +/- 20
1.0
60
1.3
Return Loss
55
Polarization Dependent Loss
Repeatability
0.06
+/-0.01
0.1
+/-0.02
Isolation
dB
-60
-50
Input Optical Power
Switching Time
dBm
ms
24
25
|
REV 2012.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EOS-6000 Optical A/B Switch
DATASHEET | OCTOBER 2012
FIBER OPTICS
General and Mechanical Specifications
Property
Requirement
Comments
Switching Threshold
Switching Mode
20 dB range – see ordering info
Auto, Manual, remote
SC/APC
Settable within range
Optical Connector
Other styles available
100 Base-T Ethernet
Rear Panel RS-232 interface
LED Indicators
SNMP v1
Reserved for Factory Use
Power, Main, Backup, and Output Indicators
Monitoring Interfaces
Operating Temperature
Storage Temperature
0C to 50C
-25C to 65C
FCC: Subpart B. Part 15, class “A” Unintentional
Radiators
Agency Listings
Power Consumption
Maximum
5W
Supply Range (VDC) (VAC)
Dimensions
85 to 240 VAC, 50/60 Hz
36 - 72 VDC
430x300x44mm
Model Number Information (note 1)
6000 – 0S
□
-
□ □ □ □
Operating
Wavelenghth
Power
Supply
Switching Threshold
range
Optics
EMCORE Logo
0 – No
3 – 1310nm
1 – SC/APC
2 – FC/APC
3 – SC/UPC
4 – FC/UPC
5 – LC/UPC
6- LC/APC
1 – AC
1 – [-30, -10] dBm
5 – 1550nm
2 – DC
2 – [-20, 0] dBm
3 – [-10, 10] dBm
4 – [0, 20] dBm
2 – Yes
Note 1: Not all configurations are available - contact factory.
Example: 6000-0S5-1232
1550nm, SC/APC connectors, DC power supply, -10 to + 10 dBm input range, EMCORE Logo.
|
REV 2012.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明