7200-01-XX32-21111 [EMCORE]
Low Noise Figure for CATV;
| 型号： | 7200-01-XX32-21111 |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | Low Noise Figure for CATV 有线电视 |
| 文件： | 总6页 (文件大小：564K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
The Medallion 7200 series product line is a family of state-of-the-art high
performance CATV Erbium/Ytterbium Doped Fiber Amplifiers (EYDFA). Packaged
in a convenient 2 RU housing, this line of fiber amplifiers has been optimized for
superior output power stability and the exceptionally low noise figures demanded
by CATV applications.
The Medallion 7200 provides very stable optical outputs over a wide operating
temperature range. Internally it is supported with input and output isolators for
enhanced system stability and performance. Optical power is continuously
monitored at the input and output for automatic power control during operation
over a wide operating temperature range.
Applications
CATV Supertrunking
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
The Medallion 7200 offers a full range of flexible configurations and a rich set of
features. These include remote management capability through SNMPv2, Telnet
and a resident Web Server. The Medallion 7200 also supports MIBs specified by
SCTE (Society of Cable Television Engineers) for this product class. For local
management, an RS-232 port is standard, along with a convenient front panel
control menu provided on a Vacuum Fluorescent Display (VFD).
Features
High Saturation Output Power up to
43 dBm (Pre-Splitter)
Dual Power Supplies, Redundant &
Hot Swappable – AC or DC
High Level Features
Front Panel Optical Input & Output
Monitor Ports
Automatic Power Control and/or Automatic Gain Control Modes
Port Count, Optical Power, and Connector Style Options
Integrated per Channel WDM for FTTx PON Applications
SNMPv2 Control Interface
Web Server
10/100bT
Low Noise Figure for CATV
Wide Input Dynamic Range
Monitors & Alarms
Loss of Input Power
Very Stable Output Power Over a Wide
Operating Temperature Range
Loss of Output Power
Pump Laser Diodes Bias Current
Pump Laser Diodes Temperature
Case Temperature
Redundant Power Supplies
Redundant Fans
|
REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
General and Electrical Characteristics
Property
Requirements
Symbol
Min
Typ
Max
Unit
AC Power Supply
VAC
85
265
VAC
Voltage
DC Power Supply
Voltage
VDC
-36
-48
-72
80
VDC
Power Consumption Note 1
PTOT
W
EN 50083-2-2006
EN 55013
EN 61000-3-2
EN 61000-4-6
EN 61000-4-3
Agency Listing, EMI
EN 61000-4-2
EN 61000-4-4
EN 61000-3-3
FCC Part 15 (Subpart B, Class
A), 107(b), 109(b)
IEC 60950-1/A1:2009
IEC 60825-1:2007
Agency Listing, Safety
Transportation Vibration
GR-63-CORE
Transportation Shock
GR-63-CORE
Note 1: 80 W valid at 0 dBm input power and 43 dBm total output power within specified operating temperature range.
|
REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
Optical Characteristics
Property
Symbol
Min
1545
-10
30
Typ
1550
0
Max
1562
12
Unit
Wavelength Range
Input Power
nm
dBm
dBm
dB
λOP
PIN
Total Output Power Options Note 1
Output Power Delta to Nominal Note 2
Output Port Count Options (SC) Notes 1,3
POUT
43
-0.5
1
0.5
64
POUT
Δ
-
NF
Note 4
6.0
dB
dB
Noise Figure
Optical Isolation
ISO
30
Input Power Alarm
Input Monitor Loss
Output Monitor Loss
LOS
-12
-11
23.5
23.5
-10
24.5
24.5
dBm
dB
Lmon_in
Lmon_out
22.5
22.5
dB
Note 1: Pre-splitter total output power. Number of ports vary by model type.
Note 2: Valid for 1-16 ports. Models with greater than 16 output ports ≤ 1.2 dB deltas.
Note 3: Model types are specified by output power per port. Output power per port is limited to 21 dBm.
Note 4: Test condition with input power = 0 dBm (@ 1550 nm).
Note 5: Specifications valid within operating temperature range.
Absolute Maximum Ratings
Property
Symbol
Min
0
Typ
Max
50
Unit
oC
Operating Temperature Range
Storage temperature Range
Relative Humidity (non condensing)
TO
TS
H
-40
0
85
oC
95
%
|
REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
Outline Drawing
|
REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
European Union “RoHS Directive” Compliance
Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous
materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union
Directive 2011/65/EU (the "RoHS Directive").
Model Number Information
7200-□□-□□□□-□□□□□
Logo &
Customer
Integrated
WDM
Output Power
per Port
Number of
Ports
Optics
Optical
Input
Optical
Output
Optical
Monitor
Power
Supply
Specific
0= EMCORE
Logo
0 = Integrated
WDM
XX = xx dBm/port
(Maximum: xx=21
dBm)
01 = 1 port
1 = SC/APC
1 = Front
1= Front
1= Front
1= AC primary,
no secondary
02 = 2 ports
04 = 4 ports
08 = 8 ports
16 = 16 ports
20 = 20 ports
32 = 32 ports
64 = 64 ports
1=No Logo
1 = No
Integrated
WDM
2 = FC/APC
3 = E2000
2 = Rear
2= Rear
2= Rear
2=DC primary,
no secondary
3 = None
3=AC primary,
AC secondary
4 = SC/APC
4=AC primary,
Angled
DC secondary
5= FC/APC
5=DC primary,
Angled
DC secondary
6= E2000
Angled
Note 1: Not all configurations are available; please contact your EMCORE Sales Representative.
e.g. 7200-00-1632-11135 (EYDFA, EMCORE Logo, with Integrated WDM, 32 Ports, 16 dBm/Port, SC/APC, Front
Input/Output, No Optical Monitors, Dual DC)
e.g. 7200-11-1764-11133 (EYDFA, No EMCORE Logo, 64 Ports, 17 dBm/Port, SC/APC, Front Input/Output, No Optical
Monitors, Dual AC)
|
REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
Laser Safety Information
Class 1M Laser Products IEC 60825-1:2007 EN 60825-1:2007
Complies with 21 CRF 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007
Caution: Use of controls, adjustment and procedures other than those specified herein may result in hazardous laser
radiation exposure.
|
REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明