8100-S01 [EMCORE]
Fiber Optic Transmitter,;
| 型号： | 8100-S01 |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | Fiber Optic Transmitter, |
| 文件： | 总6页 (文件大小：530K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Medallion 8100 Series DOCSIS 3.1 L-EMLTM
1550 nm Externally-Modulated Transmitter
PRELIMINARY DATASHEET | AUGUST 2018
CATV
The C-Type/J-Type/F-Type/S-Type Medallion 8100 Series
The C-Type, J-Type, F-Type and S-Type Medallion 8100 series is a family of
DOCSIS 3.1 complaint, state-of-the-art high-performance 1550 nm externally
modulated CATV fiber optic transmitters optimized for varying network
applications. The Medallion 8100 series leverages a breakthrough optical device
innovation at its core, the Linear Externally Modulated Laser (L-EMLTM), invented,
developed and manufactured exclusively at EMCORE. The L-EMLTM device
consists of a high-power, low-noise, narrow linewidth laser combined with a
proprietary highly-linearized modulator in a monolithic assembly.
Applications
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
RFoG Applications
SAT-IF Transport
Packaged in a convenient 1RU housing, this line of optical transmitters couples
high optical output powers, up to 11.0 dBm, with low optical linewidth resulting in
unmatched performance. The unique EMCORE optical modulator, combined with
proprietary predistortion circuitry, provides superior CTB and CSO performance
with SBS suppression levels of greater than 21 dBm. Advanced features such as
built-in field adjustable SBS control allows these transmitters to be quickly
optimized in the field for any link or application without the need to procure
specifically tuned transmitters. This affords the system designer a level of
flexibility previously unknown in the CATV marketplace.
DWDM Node Splitting
Features
Single or Dual Optical Output
QAM or OFDM loading to 1218 MHz
Dual Power Supplies and Fans,
Redundant & Hot Swappable
Front Panel RF Test Point
SNMP Control Interface
Single 10/100BaseT Ethernet
Supports IPv4
The J-Type series are designed as a high-performance solution for applications
where the simultaneous transport of CATV and SAT-IF FM signals is required.
The SAT-IF signals can be applied anywhere in the 950 to 3500 MHz band.
.
The C-Type and S-Type series transmitters are intended for use in node-splitting
architecture designs requiring cost-effective DWDM transmission over medium
length fiber distances. They can easily be configured to meet most HFC network
solutions requiring link lengths in the range of 0 to 65 kilometers with one EDFA
as well as links utilizing multiple EDFA’s.
Vacuum Fluorescent Status Display
OMI / RF Gain Adjustment
AGC Select: CW, Video, Manual (No
AGC)
Industry-Leading Field Adjustable SBS
Suppression
The F-Type series transmitters are intended for use in FTTx and RFoG
architecture designs requiring high-quality transmission over varying transmission
lengths and EDFA output powers. These transmitters successfully support very
high optical launch powers while controlling the detrimental effects of Stimulated
Brillouin Scattering (SBS), group velocity dispersion (GVD), and self-phase
modulation (SPM).
Supports DOCSIS 3.1 standard
Backward compatible to DOCSIS 3.0
Tilt Control for CATV and SAT IF inputs
© 2018 EMCORE Corporation
|
REV 2018.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE is a registered trademark of EMCORE Corporation in the U.S. and other countries.
Medallion 8100 Series DOCSIS 3.1 L-EMLTM
1550 nm Externally-Modulated Transmitter
PRELIMINARY DATASHEET | AUGUST 2018
CATV
Optical / Electrical Characteristics
C-Type
Property
Performance (Note 1-7)
Specified Link Length
Units
Models
8100-C12
40
Comments
8100-C11
8100-C13
L (km)
40
40
All units support additional
QAM loading to 1.2 GHz
Channel Plan
NTSC 80
PAL 60
42 CENELEC
Optical Output Power
Noise Bandwidth
Po (dBm)
BW (MHz)
(dBm)
10
4
10
5
10
5
Min.
SBS Suppression
11.0
52
11.0
52
11.0
53.5
-61
-63
Min.
Min.
Max.
Max.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
CNR (dB)
CSO (dBc)
CTB (dBc)
-62
-63
-62
-63
All Digital Load QAM/OFDM
All Digital Load QAM/OFDM
MER
BER
38
38
NA
NA
Min. Digital loading to 1.2GHz
Min. Pre-FEC
1.0 E-08
1.0 E-08
J-Type
Property
Performance (Note 1-8)
Specified Link Length
Units
Models
Comments
8100-J01
8100-J02
L (km)
25
25
With 54 QPSK carriers from 950
to 3500 MHz
Channel Plan
NTSC 80
PAL 60
Optical Output Power
Po (dBm)
BW (MHz)
(dBm)
7.0
4
7.0
5
Min.
Noise Bandwidth
SBS Suppression
15.0
51.0
-62
-63
27
15.0
51.0
-62
-63
27
Min.
Min.
Max.
Max.
Min.
Max.
Max.
CATV Carrier to Noise Ratio
CATV Composite Second Order
CATV Composite Triple Beat
SAT-IF Carrier to Noise Ratio
SAT-IF Intermodulation Products
SAT-IF Spurious Products
CNR (dB)
CSO (dBc)
CTB (dBc)
CNR (dB)
(dBc)
-35
-38
-35
-38
(dBc)
F-Type
Property
Performance (Note 1-7)
Units
Models
8100-F01
Comments
8100-F02
30
Specified Link Length
L (km)
30
NTSC 80
7.0
Channel Plan
PAL 60
7.0
All units support additional QAM loading to 1.2 GHz
Min.
Optical Output Power
Noise Bandwidth
Po (dBm)
BW (MHz)
(dBm)
4
5
SBS Suppression
21.0
48.0
-60
21.0
48.0
-60
Min.
Min. @ -5.5 dBm RX power
Max.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
All Digital Load QAM/OFDM
All Digital Load QAM/OFDM
CNR (dB)
CSO (dBc)
CTB (dBc)
MER
-60
-60
Max.
38
38
Min. Full digital loading to 1.2GHz
Min. Pre-FEC
1.0 E-08
BER
1.0 E-08
© 2018 EMCORE Corporation
| REV 2018.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE is a registered trademark of EMCORE Corporation in the U.S. and other countries.
Medallion 8100 Series DOCSIS 3.1 L-EMLTM
1550 nm Externally-Modulated Transmitter
PRELIMINARY DATASHEET | AUGUST 2018
CATV
S-Type
Property
Units
Models
Comments
Performance (Note 1-7)
8100-S01
8100-S02
8100-S03
All units support additional QAM loading to
1.2 GHz
Specified Link Length
L (km)
65
65
65
Channel Plan
NTSC 80
7.0
PAL 60
7.0
42 CENELEC
Optical Output Power
Noise Bandwidth
Po (dBm)
BW (MHz)
(dBm)
7.0
5
Min.
4
5
SBS Suppression
16.0
52
16.0
52
16.0
52.5
-60
-64
NA
Min.
Carrier to Noise Ratio
Composite Second Order
Composite Triple Beat
All Digital Load QAM/OFDM
CNR (dB)
CSO (dBc)
CTB (dBc)
MER
Min.
-61
-61
-64
38
Max.
Max.
-64
38
Min. Full digital loading to 1.2GHz
Min. Pre-FEC
All Digital Load QAM/OFDM
BER
1.0 E-08
1.0 E-08
NA
Notes:
1. Unless stated otherwise all specifications apply with no digital loading.
2. Unless stated otherwise specifications apply for nominal RF input level as defined below, after 30 minute stabilization period.
3. CNR may degrade over full temperature range by 0.5 dB. Distortions may degrade over full temperature range by 1.0 dB.
4. Units are tested per the Test / Link Configuration Table
5. All analog channel plan specifications are valid for frequencies above 112.25 MHz. Lower frequency carriers may exhibit a CNR penalty
6. Noise figure for the EDFA = 4.5 ~ 5.5 dB. Fiber specification is Corning SMF-28, single mode fiber
7. Receiver responsivity is 0.95 mA/mW, Equivalent noise current is 7 pA/(Hz)1/2
8. With 36 QPSK modulated SAT-IF signals between 950 … 3500 MHz. 27 MHz IF bandwidth
General and Mechanical Specifications
Property
Requirement
Comments
Various Options + ITU-grid available – see Model
Number Information
Wavelength
1555 +/-5 nm, 1550 +/-5 nm
Channel Plan
Various – See Specification Tables
SC/APC
Custom channel plans available
Other styles available
Optical Connector
100 Base-T Ethernet (SNMPv2)
Rear Panel USB interface
Monitoring Interfaces
VFD- (Vacuum Fluorescent Display - Optional)
VFD Screen Front Panel Controls Optional
Operating Temperature
Storage Temperature
Power Consumption
0C to 50C
-20C to 70C
65W max
EMI:
Safety:
EN50083-2:2006 (US CATV)
EN55022:2006 (US IT)
EN61000-3-2 (Harmonics)
EN61000-3-3 (Flicker)
FCC: Part 15, Subpart B, class “A” Unintentional
Radiators
FDA/CDRH Laser Safety Governed by Code of
Federal Regulations Title 21, Volume 8, Part 1040
IEC 60950-1
Laser IEC 60825-1
CB Certification
Agency Listings
Transportation Vibration
Transportation Shock
GR-63-CORE
GR-63-CORE
In Shipping package
In Shipping package
Non-condensing
Operating Humidity
Supply Range
0% to 95%
90 to 265 VAC, 50/60 Hz
(VAC)
+/- (36 – 72) VDC
© 2018 EMCORE Corporation
| REV 2018.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE is a registered trademark of EMCORE Corporation in the U.S. and other countries.
Medallion 8100 Series DOCSIS 3.1 L-EMLTM
1550 nm Externally-Modulated Transmitter
PRELIMINARY DATASHEET | AUGUST 2018
CATV
Dimensions
19.0”W x 15.0”D x 1.72”H
(width includes 19” front panel ears, depth includes,
connectors, fans & front panel) – see drawing
General and Mechanical Specifications (continued)
Property
Requirement
Comments
Nominal CATV RF Input Power Level
83 dBuV/ch - 23 dBmV/ch
78 - 96 dBuV/ch
80 channels – Nom. Composite = -6.7 dBm
CATV RF Input Range
80 NTSC channels
ALC lock Range
Composite CATV RF Input Range
OMI Control Range
-12 to +6 dBm
+2 to -8 dB
CATV Frequency Range
45MHz – 1218 MHz
+/- 0.50 dB
45 MHz – 550 MHz
45 MHz – 1218 MHz
CATV Flatness
+/- 0.75 dB
CATV Input impedance
75
CATV Input Return Loss
16dB min
45 MHz – 1218 MHz
CATV Programmable Slope Range
CATV Front Panel RF Tap
CATV Front Panel RF Tap Flatness
Nominal SAT-IF RF Input Power Level
SAT-IF RF Input Range
-2 to +8 dB
-20 +/- 1 dB down from RF input
+/- 1 dB
45 MHz – 1218 MHz
86 dBuV/ch - 26 dBmV/ch
82 - 98 dBuV/ch
-11 to +5 dBm
+2 to -8 dB
Nom. Composite = -7.2 dBm
Composite SAT-IF Input Range
OMI Control Range
ALC lock Range
SAT-IF Frequency Range
SAT-IF Flatness
950 MHz to 3500 MHz
+/- 2.0 dB
SAT-IF Input impedance
75
SAT-IF Input Return Loss
SAT-IF Programmable Slope Range
SAT-IF Front Panel RF Tap
10 dB min
950 MHz – 3500 MHz
950 MHz – 3500 MHz
0 to +6 dB
66 +/- 2.5 dBuV/Ch at 1.5% OMI/ch
SAT-IF Front Panel RF Tap Flatness
+/- 1 dB
Test/Link Configuration
Property
J-Type
EDFA
15 dBm
None
Link1
25 km
40 km
65 km
30 km
Received Power2
0.0 dBm at the receiver
0.0 dBm at the receiver
0.0 dBm at the receiver
-5.5 dBm at the receiver
C-Type
S-Type
16 dBm
21 dBm
F-Type
© 2018 EMCORE Corporation
| REV 2018.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE is a registered trademark of EMCORE Corporation in the U.S. and other countries.
Medallion 8100 Series DOCSIS 3.1 L-EMLTM
1550 nm Externally-Modulated Transmitter
PRELIMINARY DATASHEET | AUGUST 2018
CATV
Outline Drawing (Dimensions in inches)
© 2018 EMCORE Corporation
| REV 2018.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE is a registered trademark of EMCORE Corporation in the U.S. and other countries.
Medallion 8100 Series DOCSIS 3.1 L-EMLTM
1550 nm Externally-Modulated Transmitter
PRELIMINARY DATASHEET | AUGUST 2018
CATV
Model Number Information (note 2)
8100 – □ □ □ □
-
□ □ □ □ □
Logo &
Customer
Specific
Link
type
Pout
(dBm min)
Wavelength
(nm)
Power
Supply
Loading Type
Optics
RF
1 – RF IN
Rear, TP
Front
0 – Emcore
Logo
0 – 7.0 dBm Min.
Types S,F,J
1 – SC/APC,
Rear
00 –1555+/-
5.0nm
1 – AC primary,
no secondary
S – 65 km
C – 40 km
1 – NTSC 80
2 – RF IN
Front, TP
Front
1 – 10.0 dBm Min.
Type C
2 – FC/APC,
Rear
01 – 1550+/-
5.0nm
2 – DC primary,
no secondary
1 – no Logo
2 – PAL 60
xx – ITU
Channel +/-
0.1nm
3 – RF IN
Front, TP
Rear
2- Dual 6.0 dBm
Outputs
3 – E2000/APC,
Rear
3 – AC primary,
AC secondary
F – 30 km
J – 25 km
3 – 42 CENELEC Note 4
Note 1
4 – RF IN
Rear, TP
Rear
4 – SC/APC,
Front
4 – AC primary,
DC secondary
5 – FC/APC,
Front
5 – DC primary,
DC secondary
6 – E2000/APC,
Front
Note 1: ITU grid wavelengths can be specified from channel 18 to 62. Contact factory for availability.
Note 2: Not all configurations are available, contact factory.
Note 3: Contact Factory for Model type availability.
Additional Kits
G3708-006-001 - Replaceable AC power supply modules
G3708-005-001 - Replaceable DC power supply modules
G7914-076-001 - Replaceable Blank power module plate
G7906-008-001 - Replaceable fans
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class 1M laser product. During use as
intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation. This product has been
issued accession number 0820466-001.
DANGER
!
DANG ER
INVISIBLE LASER RADIATION
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE
TO BEAM
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Wavelength: 1550nm
Max. Output : 30mW
Avoid direct exposure to beam
Do not view beam directly with
Class 1M Laser Product
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LASERPRODUCT IEC60825-1:2007 EN60825-1:2007
MAX. OUTPUT: 30mWWAVELENGTH: 1550nm
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007
G8760-073-001 REV. B
© 2018 EMCORE Corporation
| REV 2018.08
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE is a registered trademark of EMCORE Corporation in the U.S. and other countries.
相关型号：
810001BK-21LFT
PLL Based Clock Driver, 810001 Series, 1 True Output(s), 0 Inverted Output(s), 5 X 5 MM, 0.95 MM HEIGHT, ROHS COMPLIANT, MO-220VHHD-2, VFQFN-32
IDT
©2020 ICPDF网 联系我们和版权申明