MAFA1014-EC1-00-E-1 [EMCORE]
Full Function Fiber Optic Amplifier Ready for Integration;
| 型号： | MAFA1014-EC1-00-E-1 |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | Full Function Fiber Optic Amplifier Ready for Integration |
| 文件： | 总5页 (文件大小：533K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012
FIBER OPTICS
MAFA 1000 Series Erbium Doped Fiber Micro Amplifier
EMCORE’s MAFA 1000 Series Erbium Doped Fiber micro Amplifier (μEDFA)
Gain Block Module is an ideal building block for OEM system integrators. The
family of MAFA 1000 EDFA Gain Blocks is designed to meet the most demanding
noise performance requirements of fiber optic communications and control
systems, and performs all the functions required of an optical amplifier for system
integration.
MAFA 1000 series EDFA Gain Blocks provide input and output optical isolation for
stable, low noise operation. The input and output optical signal power levels are
detected for monitoring and control. The input optical signal is amplified with
active gain control for a constant output power level or with active output power
control for constant gain mode operation.
Applications
CATV Systems
Long Distance RF/Microwave Fiber
Optic Communication Links
The MAFA 1000 series EDFA Gain Blocks also provide monitors and associated
alarms for all critical operating parameters. The optical output of the MAFA 1000
series EDFA Gain Blocks can be split into multiple ports by optional external
splitter. Optional back reflection monitoring feature enables safe output optical
power managing.
Sensing and Control Systems
High Performance Supertrunking Links
High Power Distribtuion Networks
Redundanct Ring Architectures
FTTx Networks
The compact mechanical footprint of the MAFA 1000 allows using this unit to be
installed in small space environments.
Features
Full Function Fiber Optic Amplifier
Ready for Integration
Low Noise Figure (Typ < 4.5 dB)
Pin: -6 dBm to +12 dBM
Pout: +14 dBm to +23 dBm
RS-232 Monitor and Control Interface
(SNMP V.1 is also possible)
Standard and Optional Gain Flatness
Low Electrical Power Consumption
Input/Output Isolation >40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.2 ps
Input & Output Return Losses < -40 dB
Output Residual Pump Power < -30 dBm
Back Reflection Monitoring
|
REV 2012.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012
FIBER OPTICS
Optical/Electrical Characteristics1
Property
Unit
Limit
Models
Comments
1014
1017
1020
1022
1023
Operating Input Power
Operating Input Power
Pin (dBm)
Pin (dBm)
Max
Min
12
12
12
12
12
Typical
(May vary for some models)
-6
-6
-6
-6
-6
14
+/-.25
17
+/- .25
20
+/- .25
22
+/- .25
23
+/- .25
Output Power
Noise Figure
Po(dBm)
NF (dB)
Nominal
Typ
Note 2
@ Pin = 0 dBm, no Pin monitoring
(Notes 3, 7, 8)
4.0 dB
4.0 dB
4.0 dB
4.0 dB
4.0 dB
Static Gain Flatness
Dynamic Gain Flatness
Output Power Stability
ΔGs (dB)
ΔGd (dB)
(dB)
Max
Max
Max
+/-0.5
+/-1.0
+/- 0.1
+/-0.5
+/-1.25
+/- 0.1
+/-0.5
+/-1.5
+/- 0.1
+/-0.5
+/-2.0
+/- 0.1
+/-0.5
+/-2.0
+/- 0.1
(Notes 4)
(Notes 5, 7)
(Note 6)
Power Consumption
(Steady state)
Psys(W)
Max
2
3
5
6
8
70oC Case
Notes:
1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges
2. Measurement variations
3. Measured with 8 evenly spread input optical signals @ 25°C, Pin ≈ 0 dBm. Measuring with 1 input optical signal with Pin
≈ 0 dBm and ≈ 1550 nm is also available
4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C
5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm)
@ 25C; Gain Flattened Options with ΔG ≤ +/-0.75dB or ΔG ≤ +/-1.0dB are available (for some models and for defined
input optical power only)
6. Over polarization and temperature
7. Specific ΔG can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) equal or different from 0
dBm
8. If input power monitoring and input isolation are required then typical NF (Typ) for all units @ Pin = 0 dBm as 4.5 dB
General and Mechanical Specifications
Property
Requirement
Comments
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
1532nm ~ 1565nm
0C to 50C
-40C to 85C
Standard
Standard*
Standard
20% to 85%
Non-condensing
All versions**
User Specified
All versions
Voltage Supply Range
Optical Connectors
Dimensions (mm)
+12VDC/+5VDC/+3.3VDC
SC; FC; E2000
70 x 90 x 15
* - Extended temperature range of –40C to +75C is also possible
** Transient Pulse to +X.XVDC + 5% for < 100 msec
|
REV 2012.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012
FIBER OPTICS
Outline Drawing (dimensions in mm)
Compliance and Reliability Information
FCC: Subpart B. Part 15 class “A”: Unintentional Radiators
EN 55013: Sound and Television Broadcast receivers and associated equipment – Radio disturbance characteristics- limits
and methods of measurements – Electric Field Radiation Emissions (2001)
Fit Rate: 90% level of confidence - 290 @ 25C
|
REV 2012.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012
FIBER OPTICS
Electrical Connector Pinout
PIN #
Designation
PIN #
Designation
1
2
+12VDC/+5VDC/+3.3VDC
+12VDC/+5VDC/+3.3VDC
+12VDC/+5VDC/+3.3VDC
+12VDC/+5VDC/+3.3VDC
GND
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
LED_Laser_ON
Display_SCLK**
Pump_Bias_Alarm *
Loss_Input_Power *
Loss_Output_Power *
Display_MOSI**
Display_SS**
Back_Reflection_Alarm *
Key_Switch
3
4
5
6
GND
7
RS232_Rx
8
RS232_Tx
9
GND
10
11
12
13
14
15
GND
Key_Right
LED_Comm
Key_Left
EDFA_Reset
Key_Up
EDFA_Disable
Pout_Mute
Key_Down
CAN+***
EDFA_Temp_Alarm *
CAN-***
* - software adjustable parameters; logic levels (low / high) TBD
** - signals for driving VFD display
*** - signals for enabling SNMP
Ordering Information
MAFA10
-
-
-
-
Voltage
Options
Power Level
Connector Option
GF/NF Options
Temp Options
1014 – 14 dBm
SC1 - SC/APC
00 - Standard
1 – “+12VDC”
S- Standard
1017 – 17 dBm
1020 – 20 dBm
S21 - SC/PC
FC1- FC/APC
01 – Gain Flattened option
02 – No Pin monitoring, low NF option
2 – “+5VDC”
3 – “+3.3VDC”
E – Extended
1020 – 22 dBm
1023 – 23 dBm
FC2- FC/PC
EC1-E2000/APC
EC2-E2000/PC
03 – Standard with back reflection monitoring
Example:
MAFA1014-SC-00-S-2: 14 dBm gain block with SC/APC optical connectors, standard NG/GF, standard temperature range,
+5VDC power supply
Note:
Only some models can be order with Gain Flattened options. (-01 suffixes). Please contact your Sales Representative
for details
|
REV 2012.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012
FIBER OPTICS
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based
on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the
fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.
The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1535 ~ 1565 nm (dependant on input source)
Maximum Output Power = 0.2 W (single output, 23 dBm model)
|
REV 2012.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明