OTS-1LT-B7-1303-SA-IC [EMCORE]

Wideband Optical Link; 宽带光纤链路


型号：	OTS-1LT-B7-1303-SA-IC
厂家：	EMCORE CORPORATION
描述：	Wideband Optical Link 宽带光纤链路光纤
文件：	总2页 (文件大小：149K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

OTS-1L

Wideband Optical Link

Optiva^®SERIES Professional Media Transport

SATCOM

50MHz to 3000MHz Wideband Optical Link

Optiva® Wideband ﬁber-optic links are optimized to perform

in the 50 to 3000 MHz frequency range providing transparent

signal transportation for satellite antenna applications. The

unique features of the OTS-1LT series include simple push

button peaking for optimum performance and our

patent-pending SmartGain™ Control, which ensures consistent

performance over varied signal conditions. As with all Emcore

optical products, the highest quality components and modern production

techniques insure that intra-facility links provide the highest performance as a

cost-effective alternative to coaxial cable. They provide much longer

transmission distances than copper cables, simplify network design, ease

installation and even enhance immunity from EMI, RFI and lightning. These

transmitters and receivers take the high RF performance and diverse features

of Emcore’s Ortel technology and combine them into a compact package

compatible with the Optiva® OT-CC-16 chassis.

Features

50 to 3000 MHz optimized for IF, L and S band

satellite signals

30dB adjustable gain range provides

perfect level match for signal distribution

Unique peak optimizer and SmartGain™ control

50 & 75 Ohm BNC or 50 Ohm SMA

System Design

Tx & Rx RF power monitors via LED, SMA &

remote

Optiva® is a completely modular hot-swappable platform. Both 19” rack

mount and compact tabletop or wall-mountable enclosures are available. The

19” rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards

and provides a single power supply (Model PS-200), or a dual-redundant,

hot-swappable power supply option. Compact enclosures are available with

1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures

both use an external power supply (PS-9012) and optionally have a standard

2-pin DC power connector for more custom applications. The four-slot 1 RU

enclosure (OT-CC-4) uses an integrated power supply. The Optiva® family’s

existing wide range of video, audio and data transport products include a

unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto

a single ﬁber, thus resulting in an extremely capable, yet conveniently ﬂexible,

signal transport system.

LNB power

SNMP monitoring and control

High-dynamic-range, optically-isolated DFB

lasers run cooler and require less power

Fits in Optiva® enclosures, which support

Daisy Chain™ video, audio and data links.

Hot swap redundant power supplies

virtually eliminate downtime

16, 4, 2, & 1 slot enclosures available

CE & CSA Certiﬁed Device

Transmitter

DC to LNB

Receiver

P_L

P_R

Photo-

Diode

S_L

Laser

S_IN

S_OUT

S_MON

Push button

Optimizer

S_MON

626 293 3400

satcom-sales@emcore.com

www.emcore.com

OTS-1L

Wideband Optical Link

Optiva^®SERIES Professional Media Transport

SATCOM

Performance Highlights

Typical S21

2 dB per division

3.0 GHz

Parameter

Min

Typical

Max

Units

Link

Frequency Range

50 Ohm

3000

2500

MHz

75 Ohm

Fiber Distance

dBo

Optical Loss

Air Temperature

-10

˚C

RF Input within SGC range¹

TX Gain (TG) at max, 1 GHz²

TG Adjustment Range (reduction from max)

Noise Figure (TG at max, 2150 MHz, 1dBo loss)

Spur Free Dynamic Range (1dBo loss)

TXz

0 to -35

dBm

dB (W/A)

.05 GHz

3.6 GHz

100

OTS-1L (TX & RX)

²/³

103-108

dB/Hz

LNB Voltage

Current

350

Optical Power

dBmo

DC Power

LNB Off

350

RF Output (Tx at peak, 1 dBmo into Rx)

RX Gain (RG), at max, 1 GHz²

-8 to -25

dBm

dB (A/W)

5.06 in.

128 mm

3 RU

RG Adjustment Range (reduction from max)

Output IP3 (2150 MHz)

dBm

Output 1dB compression (2150 MHz)

dBm

Optical Input

Optimal

-12

-6

dBmo

DC Power

250

1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit.

2. Link RF Gain_dB= TG + RG – 2*FiberLoss_dBo(assumes Rin = Rout)

3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB

Enclosure Options

Ordering Information

Product Code

Speciﬁcations

OTS-1LT/B5-1303-SA-IC

OTS-1LT/B7-1303-SA-IC

OTS-1LT/S5-1303-SA-IC

OTS-1LR/B5-SA-IC

OTS-1LR/B7-SA-IC

OTS-1LR/S5-SA-IC

OPV-CTLR-IC

Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC

Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC

Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC

Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC

OT-CC-16

OT-CC-4

Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC

Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC

NMS SNMP Controller Card & MIB for Optiva Family

OTP-1ETR-A2/A2

OT-CC-16-01

Optical Tcvr, 1Ch, Ethernet, SM, Dual LC

Chassis, Rack Mount, 16 Slot, 3RU, Rear Access

OT-DTCR-2

OT-DTCR-1

PS-200-(xx)

Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, (Specify power cord (NA, EU, UK))

Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110- 240 AC input, Power Cord

Chassis, ﬂange-mount, w/ Power Supply, 1 slot / 2 slot

OT-CC-4-1U-(xx)

MADE IN

PART 15

FCC COMPLIANT

USA

OT-DTCR-1 / OT-DTCR-2

Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change

the design or speciﬁcations of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of

the EMCORE Corporation.

Document Revision 3/29/2009

626 293 3400

satcom-sales@emcore.com

www.emcore.com

相关型号：