OTS-1REF [EMCORE]
Reference Oscillator Link; 参考振荡器链接型号: | OTS-1REF |
厂家: | EMCORE CORPORATION |
描述: | Reference Oscillator Link |
文件: | 总2页 (文件大小:205K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OTS-1Ref
Reference Oscillator Link
Optiva® SERIES Professional Media Transport
SATCOM
1MHz to 20MHz Reference Oscillator Link
Optiva® reference oscillator fiber intra-facility links are a high
performance, cost-effective alternative to coaxial cable. They
provide a secure means of transporting low frequency timing
and reference signals allowing all transport signals to be phase
locked to a single distributed source. Employing fiber optic
links provides much longer transmission distances than copper
cables, which simplifies network design, eases installation and even enhances
immunity from EMI, RFI and lightning. These transmitters and receivers take
the high RF performance and diverse features of Emcore’s Ortel technology
and combines them into a compact package compatible with the Optiva® OT-
CC-16 chassis. The enhanced low frequency performance ideally suits the OTS-
1Ref optical transport modules for use in applications in conjunction with
L-band signal, video, or data signals anywhere between studio and trasmis-
sion. The OTS-1Ref is the perfect complement to the wide range of Optiva®
products.
Features
1 to 20 MHz optimized for reference signals
15dB adjustable gain range provides
perfect level match for signal distribution
Designed for high level signal input
50 Ohm BNC
System Design
Receiver RF power monitoring via LED, SMA &
remote monitoring
Optiva® is a completely modular hot-swappable platform. Both 19” rack
mount and compact tabletop or wall-mountable enclosures are available. The
19” rack-mount enclosure (Model OT-CC-16) can support up to 16 insert cards
and provides a single power supply (Model PS-200), or a dual-redundant,
hot-swappable power supply option. Compact enclosures are available with
1, 2 or 4 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures
both use an external power supply (PS-9012) and optionally have a standard
2-pin DC power connector for more custom applications. The four-slot 1 RU
enclosure (OT-CC-4) uses an integrated power supply. The Optiva® family’s
existing wide range of video, audio and data transport products include a
unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto
a single fiber, thus resulting in an extremely capable, yet conveniently flexible,
signal transport system.
SNMP monitoring and control
High-dynamic-range, optically-isolated DFB
lasers run cooler and require less power
Fits in Optiva® enclosures, which support
Daisy Chain™ video, audio and data links.
Hot swap redundant power supplies
virtually eliminate downtime
16, 4, 2, & 1 slot enclosures available
Copyright© 2009 Emcore Corporation
626 293 3400
satcom-sales@emcore.com
www.emcore.com
OTS-1Ref
Reference Oscillator Link
Optiva® SERIES Professional Media Transport
SATCOM
Performance Highlights
Typical Response
Parameter
Min
Typical
Max
Units
MHz
dB
2 dB per division
Link
Frequency Range
1
-
20
-
RF link Gain (1dBo optical loss, RX gain at max)1
Fiber Distance
2
12
-
0
20
8
Km
Optical Loss
0
-
dBo
Air Temperature
-10
-
-
50
15
-
˚C
TX
RF input
0
dBm
dB (W/A)
dB PP
dBm
dB/Hz
TX Gain (TG) at 10 MHz1
RF Flatness (1-20 MHz)
Input IP3 (0dBm per tone, 10&11 MHz)
Carrier to Noise Ratio, (3dBm RF input, 10 MHz)
Spur Free Dynamic Range (1dBo loss)
RF return loss
-18
-
-13
0.5
34
136
> 111
-15
6
2
.03 MHZ
20.0 MHZ
30
130
105
-
-
-
OTS-1R (TX & RX)
²/³
-
dB/Hz
-10
7
dB
Optical Power
5
dBmo
DC Power
-
-
12
110
-
V
mA
150
RX Gain (RG), at 10 MHz1
Gain Flatness (max gain) 1-20 MHz
RF Return Loss
RX
22
-
27
-
dB (A/W)
dB PP
dB
0.5
-19
30
2
5.06 in.
128 mm
3 RU
-
-15
Output IP3 (10&11 MHz)
Output P 1dB @ 10 MHz
24
-
-
-
dBm
15
dBm
Optical Input
Optimal
-12
-6
-
-
10
10
dBmo
dBmo
DC Power
-
-
12
150
-
V
mA
200
1. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout)
2. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB
TX
RX
Ordering Information
Product Code
Specifications
Enclosure Options
OTS-1RefT/B5-1306-SA-IC Transmitter, 1-20 MHz, BNC 50 ohm, 1310 nm, 6dBm (typ), SC/APC
OTS-1LT/B5-1303-SA-IC
OTS-1LT/B7-1303-SA-IC
OTS-1LT/S5-1303-SA-IC
OTS-1RefR/B5-SA-IC
OTS-1LR/B5-SA-IC
OTS-1LR/B7-SA-IC
OTS-1LR/S5-SA-IC
OPV-CTLR-IC
Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC
Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC
Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC
Receiver, 1-20 MHz, BNC 50 ohm, SC/APC
Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC
OT-CC-16
OT-CC-4
Receiver, 50-3000 MHz, BNC 75 ohm, SC/APC
Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC
NMS SNMP Controller Card & MIB for Optiva Family
OTP-1ETR-A2/A2-LC
OT-CC-16-01
Optical Tcvr, 1Ch, Ethernet, SM, Dual LC
Chassis, 19 in Rack Mount, 16 Slot, 3RU, Rear Access
Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz, N. Amer. AC Cord, for OT-CC-16
Chassis w/ built-in Power Supply, 1 RU, 4 slots, 110 - 240Vac, N. Amer. AC , Cord
Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot
PS-200-NA
OT-CC-4-1U-NA
OT-DTCR-1 / OT-DTCR-2
OT-DTCR-2
OT-DTCR-1
Information contained herin is deemed to be reliable and accurate as of issue date. Emcore reserves the right to change
the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of
the EMCORE Corporation.
Rev: January 28, 2009
626 293 3400
satcom-sales@emcore.com
www.emcore.com
Copyright© 2009 Emcore Corporation
相关型号:
OTS-1SD2DA1DTR
Optiva Standard, 1 SDI 270 Mbps, 2 Stereo AES/EBU Digital Audio and 1 Duplex RS-232/422/485 Data
OPTICOMM
©2020 ICPDF网 联系我们和版权申明