首页 > 光纤 > 光纤放大器 > PONA3027-SC-02-P-AC

PONA3027-SC-02-P-AC

更新时间：2025-07-13 12:24:53
品牌：EMCORE
描述：Erbium Doped Fiber Amplifier

PDF下载

中文翻译

免费 PCB/SMT

PONA3027-SC-02-P-AC 概述

Erbium Doped Fiber Amplifier 掺铒光纤放大器

PONA3027-SC-02-P-AC 数据手册

通过下载PONA3027-SC-02-P-AC数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
PONA 3000 Series  
DATASHEET | JANUARY 2012  
FIBER OPTICS  
PONA 3000 Series Erbium Doped Fiber Amplifier  
The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an ideal  
building block for OEM system integrators. The family of PONA 3000 Optical  
Amplifiers is designed to meet the most demanding noise performance  
requirements of CATV and FTTx applications, and performs all the functions  
required of an optical amplifier for system integration. PONA 3000 series  
optical amplifiers provide optical isolation on the input and output of the gain  
block for stable, low noise operation. The input and output optical signal  
power levels are detected for monitoring and control. The input optical signal  
is amplified with active gain control for a constant output power level, or with  
active output power control for constant gain mode. The PONA 3000 series  
optical amplifiers also provide monitoring functions and associated alarms for  
all vital characteristics. The optical output of the PONA 3000 series optical  
amplifiers can be split into number of ports by an optional internal splitter.  
Applications  
High Performance SuperTrunking Links  
High Power Distribution Networks  
Fiber Deep Architectures  
FTTx Networks  
Features  
Full Function High Power Fiber Optic Amplifier  
Low Noise Figure (Typ < 6 dB)  
Total Input Power Range: -10 dBm to +12 dBm  
Total Ouput Power: +27 dBm to +37 dBm  
(Optical Ouput Power Splitter is Optional  
for these Units)  
PONA3000 series includes AC/DC Power Supply, Front Panel, Optical  
Splitters, network card and all necessary connectors.  
General and Mechanical Specifications  
General Property  
Requirement  
Comments  
Operating Wavelength  
1545 ~ 1565nm  
Standard  
Standard RS-232 communications  
Standard SNMP Communication  
(coming soon)  
Operating Case  
Temperature  
Storage Temperature  
Standard  
0C to 50C  
Standard  
-40C to 85C  
Operating Humidity  
20% to 85%  
Non-condensing  
Low Electrical Power Consumption  
Input/Output Isolation >40/40 dB  
Polarization Dependant Gain < 0.1 dB  
Polarization Mode Dispersion < 0.5 ps  
Voltage Supply Range  
85 VAC to 265 VAC 50/60 Hz  
-36 to –60 V DC  
AC version  
DC version  
*(Redundant Power Supply is  
available by Customer  
request  
Optical Connectors  
See ordering information  
19.0”W x 14.76”D x 3.44”H  
User Specified  
Dimensions In Inches  
19’’ Rack Mounted, 2 RU  
|
REV 2012.01  
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.  
PONA 3000 Series  
DATASHEET | JANUARY 2012  
FIBER OPTICS  
Performance Specifications1  
Property  
Unit  
Limit  
PONA Models  
Comment  
3027  
+12  
3030  
+12  
3032  
+12  
3033  
+12  
3035  
+12  
3037  
+12  
Operating Input Power  
Operating Input Power  
Output Power  
Pin (dBm)  
Pin (dBm)  
Po (dBm)  
NF (dB)  
GF (dB)  
(dB)  
Max  
Min  
-10  
-10  
-10  
-10  
-10  
-10  
27.0  
30.0  
32.0  
33.0  
35.0  
37.0  
Nominal (note 2)  
(note 3)  
Noise Figure  
Typ/Max  
Max  
5.5/6.0  
+/-2.0  
+/-2.50  
5.5/6.0  
+/-2.0  
+/-2.50  
5.5/6.0  
+/-2.0  
+/-2.50  
5.5/6.0  
+/-2.0  
+/-2.50  
5.5/6.0  
+/-2.0  
+/-3.00  
5.5/6.0  
+/-2.0  
+/-3.00  
Static Gain Flatness  
Dynamic Gain Flatness  
(note 4)  
Max  
(note 5)  
Output Power Stability  
(dB)  
Max  
+/- 0.2  
+/- 0.2  
+/- 0.2  
+/- 0.2  
+/- 0.2  
+/- 0.2  
(note 6)  
Power Consumption  
(steady state regime)  
20  
15  
35  
20  
45  
25  
55  
30  
65  
40  
70  
45  
50oC Case (premium)  
50oC Case (economy)  
(note7)  
Psys (W)  
Max  
Remnant pump power  
to output  
Prp (dBm)  
Nom.  
<-30  
<-30  
<-30  
<-30  
<-30  
<-30  
Notes:  
1. Unless stated otherwise all specifications apply over the full temperature range and humidity  
2. Depending on the fiber optic patch cord interface the measured value can vary up to 0.5 dB less than the actual value.  
3. Measured @ 25C, Pin = 0 dBm. Can be measured only after splitting output power  
4. Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25C  
5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @  
25C;  
6. Stability over polarization and temperature  
7. Premium version – PONA with cooled, Telecordia qualified pumps  
Economy version – PONA with uncooled pumps  
Table for Determination of Minimal Output Optical Power per Port (dBm)  
Minimum optical power per port (dBm)  
PONA Models  
Number of ports  
3027 3030 3032 3033  
3035  
35  
3037  
37  
1
2
27  
30  
32  
33  
23.5  
20.2  
16.8  
13.4  
26.5  
23.2  
19.8  
16.4  
28.5  
25.2  
21.8  
18.4  
29.5  
26.2  
22.8  
19.4  
31.5  
28.2  
24.8  
21.4  
33.5  
30.2  
26.8  
23.4  
4
8
16  
32  
64  
10.0  
7.0  
13.0  
10.0  
15.0  
12.0  
16.0  
13.0  
18.0  
15.0  
20.0  
17.0  
|
REV 2012.01  
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.  
PONA 3000 Series  
DATASHEET | JANUARY 2012  
FIBER OPTICS  
Block Diagram: Cladding Pump Technology  
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to  
produce cost effective high power optical amplification. This technology enables the development of higher power EDFAs-  
something that was cost inhibitor when using standard Erbium fiber and single mode pumps.  
Er/Yb Assembly  
Er  
Input  
Hybrid  
Filter / Isolator  
Isolator  
1% Tap  
980 nm  
pump  
Input  
monitor  
Output  
Monitor  
Multi-mode  
pumps  
Drive  
Electronics  
Sample FTTx Architecture  
Splitter  
ONT  
ONT  
ONT  
ONT  
OLT  
Voice  
1490nm  
Businesses  
Data  
1310nm  
- Voice  
- Data  
- Video  
Splitter  
Splitter  
Splitter  
WDM  
1550nm  
ONT  
ONT  
ONT  
ONT  
1550nm  
Tx  
Multi  
Dwelling Units  
Video  
20 Km  
RF  
ONT  
ONT  
ONT  
ONT  
EDFA  
20 outputs of 20  
dBm  
Homes  
|
REV 2012.01  
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.  
PONA 3000 Series  
DATASHEET | JANUARY 2012  
FIBER OPTICS  
Outline Drawing  
AC versions shown below with 8 optical output ports  
DC versions shown below with 8 optical output ports  
|
REV 2012.01  
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.  
PONA 3000 Series  
DATASHEET | JANUARY 2012  
Ordering Information  
PONA30  
FIBER OPTICS  
-
-
-
-
*
# of Output  
Ports  
Power Level  
Connector Options  
Class  
Input Voltage  
27: 27 dBm  
30: 30 dBm  
SC: SC/APC  
01: 1 port  
P: Premium  
E: Economy  
AC: 90-260 VAC 50/60 Hz  
DC: -48 VDC  
FC: FC/APC  
02: 2 ports  
32: 32 dBm  
33: 33 dBm  
35: 35 dBm  
37: 37 dBm  
EC: E2000/APC  
TC: SC/UPC  
04: 4 ports  
08: 8 ports  
16: 16 ports  
GC: FC/UPC  
SCDPLX: SC/APC Duplex  
20: 20 ports  
32: 32 ports  
64: 64 ports  
Class: Premium: Utilizes cooled pump lasers  
Economy: Utilizes uncooled pump lasers  
* PONA 3000 series with power higher then 30 dBm per port must have special output optical connector(s) and optical  
bulkhead(s). Their type(s) must be verified prior to placing Purchase Order.  
Compliance Information  
FCC:  
Subpart B. Part 15, Class “A” Unintentional Radiators  
CE:EN50083-2  
EN 61000-4-3  
EN 55020  
19995 with Amendment 1, which incorporates EN 55013 Radiated and Conducted Emissions  
Radiated Immunity  
Conducted Immunity  
Harmonics  
EN 61000-3-2  
All Components meet Telecordia GR-1312 and GR-486 Standards (Except Pumps in Economy Class)  
Fit Rate:  
90% Level of Confidence < 2500 @ 30OC Premium PONA 3035  
90% Level of Confidence < 2000 @ 30OC Economy PONA 3035  
|
REV 2012.01  
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.  
PONA 3000 Series  
DATASHEET | JANUARY 2012  
FIBER OPTICS  
Laser Safety Information  
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based  
on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the  
fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.  
The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.  
Wavelength = 1545 ~ 1562 nm (dependant on input source)  
Maximum Output Power = 5 W (single output, 37 dBm model)  
.
|
REV 2012.01  
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.  

PONA3027-SC-02-P-AC 相关器件

型号 制造商 描述 价格 文档
PONA3027-SC-02-P-DC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-04-E-AC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-04-E-DC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-04-P-2DC EMCORE EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, SC/APC Connector, Panel Mount 获取价格
PONA3027-SC-04-P-AC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-04-P-DC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-08-E-AC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-08-E-DC EMCORE Erbium Doped Fiber Amplifier 获取价格
PONA3027-SC-08-P-2DC EMCORE EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, SC/APC Connector, Panel Mount 获取价格
PONA3027-SC-08-P-AC EMCORE Erbium Doped Fiber Amplifier 获取价格

PONA3027-SC-02-P-AC 相关文章

  • 三星携纳米棱镜技术图像传感器入局，打破小米供应链索尼垄断局面
    2025-07-15
    17
  • 运算放大器输入保护：噪声隐患与 JFET 解决方案
    2025-07-15
    19
  • 技术革新助力，国产 Wi-Fi 芯片全面起飞在即
    2025-07-15
    18
  • 突破！世界首个集成电子 - 光子 - 量子芯片问世
    2025-07-15
    22

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 数据手册
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286