PONA3027-SC02EDC [EMCORE]

PRELIMINARY DATA SHEET | MARCH 21, 2008

PONA 3000 Series Erbium Doped Fiber Amplifier

Applications

•

•

•

•

High Performance Supertrunking Links

High Power Distribution Networks

Fiber Deep Architectures

FTTx Networks

Features

•

•

•

•

Full Function High Power Fiber Optic

Amplifier Ready for Integration

Low Noise Figure (Typ < 6 dB)

Total Input Power Range: –10 dBm to

+12 dBm

Total Output Power: +27 dBm to

+35 dBm (Optical Output Power

Splitter is Optional For These Units)

•

•

•

•

•

Standard RS-232 Communications

Low Electrical Power Consumption

Input / Output Isolation > 40/40 dB

Polarization Dependant Gain < 0.1 dB

Polarization Mode Dispersion < 0.5 ps

The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an

ideal building block for OEM system integrators. The family of PONA

3000 Optical Amplifiers is designed to meet the most demanding noise

performance requirements of CATV and FTTx applications, and

performs all the functions required of an optical amplifier for system

integration. Packaged in a convenient 2RU housing, the PONA 3000

series optical amplifiers provide optical isolation on the input and output

of the gain block for stable, low noise operation. The input and output

optical signal power levels are detected for monitoring and control. The

input optical signal is amplified with active gain control for a constant

output power level, or with active output power control for constant gain

mode. The PONA 3000 series optical amplifiers also provide

monitoring functions and associated alarms for all vital characteristics.

The optical output of the PONA 3000 series optical amplifiers can be

split into number of ports by an optional internal splitter.

PONA3000 series includes AC/DC power supply, front panel, optical

splitters, network card and all necessary connectors.

1 of 5

For more information on this and other products:

Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.

PRELIMINARY DATA SHEET | MARCH 21, 2008

Specifications

PROPERTY

Product Code

PERFORMANCE

Operating Input Power

Operating Input Power

Output Power

Noise Figure

Static Gain Flatness

Dynamic Gain Flatness

Output Power Stability

Power Consumption

(steady state regime)

Remnant pump power to output

UNIT

LIMIT

3027

Pin (dBm)

Pin (dBm)

Po (dBm)

NF (dB)

GF (dB)

(dB)

(dB)

Psys (W)

Prp (dBm)

Max

Min

Typ/Max

Max

Max

Max

Max

Nom.

+12

-10

27.0

5.5/6.0

+/-1.0

+/-2.00

+/- 0.25

40

25

<-30

PONA MODELS

3030

3032

+12

-10

30.0

5.5/6.0

+/-1.0

+/-2.00

+/- 0.25

50

30

<-30

+12

-10

32.0

5.5/6.0

+/-1.0

+/-2.25

+/-0.25

65

40

<-30

COMMENT

3035

(note 1)

+12

-10

35.0

5.5/6.0

+/-1.0

+/-2.50

+/- 0.25

80

50

<-30

Nominal (note 2)

(note 3)

(note 4)

(note 5)

(note 6)

o

50 C Case (premium)

o

50 C Case (economy)

(note7)

Notes:

1) Unless stated otherwise all specifications apply over the full temperature range and humidity

2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value

3) Measured @ 25°C,

EPin

= 0 dBm

4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C

5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C

6) Stability over polarization and temperature

7) Premium version – PONA with cooled, Telcordia qualified pumps

Economy version – PONA with uncooled pumps

Physical

GENERAL PROPERTY

Operating Wavelength

Operating Case Temperature

Storage Temperature

Operating Humidity

Voltage Supply Range

REQUIREMENT

1545 ~ 1562nm

0°C to 50°C

-40°C to 85°C

20% to 85%

85 VAC to 265 VAC 50/60 Hz

-36 to -60 V DC

COMMENTS

Standard

Standard

Standard

Non-condensing

AC version

DC version

*(Redundant Power Supply is

Available by Customer Request)

Optical Connectors

Dimensions In Inches

See ordering information

19.0”W x 15.7”D x 3.44”H

User Specified

19’’ Rack Mounted, 2 RU

2 of 5

For more information on this and other products:

Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.

PRELIMINARY DATA SHEET | MARCH 21, 2008

Block Diagram: Cladding Pump Technology

Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and

multi-mode pump lasers) to produce cost effective high power optical amplification. This technology

enables the development of higher power EDFAs-something that is cost prohibitive when using

standard erbium fiber and single mode pumps.

Input

Hybrid

Er

Filter / Isolator

Er/Yb Assembly

Isolator

1% Tap

980 nm

pump

Input

monitor

Multi-mode

pumps

Drive

Electronics

Output

Monitor

Sample FTTx Architecture

Splitter

Voice

Data

OLT

1490nm

1310nm

ONT

ONT

ONT

ONT

Businesses

- Voice

- Data

- Video

ONT

ONT

ONT

ONT

WDM

1550nm

Video

1550nm

Tx

RF

Splitter

Splitter

Multi

Dwelling Units

20 Km

Splitter

ONT

ONT

ONT

ONT

EDFA

20

outputs of

20

dBm

Homes

3 of 5

For more information on this and other products:

Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.

PRELIMINARY DATA SHEET | MARCH 21, 2008

Outline Drawing

AC and DC versions shown below with 8-port option

4 of 5

For more information on this and other products:

Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.

PRELIMINARY DATA SHEET | MARCH 21, 2008

Ordering Information

*

PONA30

-

-

-

-

-

Power

Level

27:

27 dBm

30:

30 dBm

32:

32 dBm

35:

35 dBm

Connector

Options

SC:

SC/APC

FC:

FC/APC

EC:

E2000/APC

TC:

SC/UPC

GC:

FC/UPC

# of Output

Ports

01:

1 port

02:

2 ports

04:

4 ports

08:

8 ports

16:

16 ports

20:

20 ports

Class

P:

Premium

E:

Economy

Input Voltage

AC:

90-260 VAC 50/60 Hz

DC:

-48 VDC

2DC:

Redundant DC

Class:

Premium: Utilizes cooled pump lasers

Economy: Utilizes uncooled pump lasers

* PONA3000 series with one or two optical outputs will have special high power output optical

connector(s) and optical bulkhead(s)

For exact model number, please contact your Sales Representative.

Qualifications

FCC: Subpart B. Part 15, class “A” Unintentional Radiators

CE: EN50083-2, 19995 with Amendment 1, which Incorporates EN 55013 Radiated and

Conducted Emissions

EN 61000-4-3 Radiated Immunity

EN 55020 Conducted Immunity

EN 61000-3-2 Harmonics

All Components Meet Telcordia GR-1312 and GR-486 Standards (Except Pumps in

Economy Class).

EN 61000-3-2 Harmonics

Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of

the product at any time without notice. EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.

5 of 5

For more information on this and other products:

Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.