PONA3033-GC-32-P-DC 概述
Erbium Doped Fiber Amplifier 掺铒光纤放大器
PONA3033-GC-32-P-DC 数据手册
通过下载PONA3033-GC-32-P-DC数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载PONA 3000 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
PONA 3000 Series Erbium Doped Fiber Amplifier
The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an ideal
building block for OEM system integrators. The family of PONA 3000 Optical
Amplifiers is designed to meet the most demanding noise performance
requirements of CATV and FTTx applications, and performs all the functions
required of an optical amplifier for system integration. PONA 3000 series
optical amplifiers provide optical isolation on the input and output of the gain
block for stable, low noise operation. The input and output optical signal
power levels are detected for monitoring and control. The input optical signal
is amplified with active gain control for a constant output power level, or with
active output power control for constant gain mode. The PONA 3000 series
optical amplifiers also provide monitoring functions and associated alarms for
all vital characteristics. The optical output of the PONA 3000 series optical
amplifiers can be split into number of ports by an optional internal splitter.
Applications
High Performance SuperTrunking Links
High Power Distribution Networks
Fiber Deep Architectures
FTTx Networks
Features
Full Function High Power Fiber Optic Amplifier
Low Noise Figure (Typ < 6 dB)
Total Input Power Range: -10 dBm to +12 dBm
Total Ouput Power: +27 dBm to +37 dBm
(Optical Ouput Power Splitter is Optional
for these Units)
PONA3000 series includes AC/DC Power Supply, Front Panel, Optical
Splitters, network card and all necessary connectors.
General and Mechanical Specifications
General Property
Requirement
Comments
Operating Wavelength
1545 ~ 1565nm
Standard
Standard RS-232 communications
Standard SNMP Communication
(coming soon)
Operating Case
Temperature
Storage Temperature
Standard
0C to 50C
Standard
-40C to 85C
Operating Humidity
20% to 85%
Non-condensing
Low Electrical Power Consumption
Input/Output Isolation >40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
Voltage Supply Range
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
AC version
DC version
*(Redundant Power Supply is
available by Customer
request
Optical Connectors
See ordering information
19.0”W x 14.76”D x 3.44”H
User Specified
Dimensions In Inches
19’’ Rack Mounted, 2 RU
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 3000 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Performance Specifications1
Property
Unit
Limit
PONA Models
Comment
3027
+12
3030
+12
3032
+12
3033
+12
3035
+12
3037
+12
Operating Input Power
Operating Input Power
Output Power
Pin (dBm)
Pin (dBm)
Po (dBm)
NF (dB)
GF (dB)
(dB)
Max
Min
-10
-10
-10
-10
-10
-10
27.0
30.0
32.0
33.0
35.0
37.0
Nominal (note 2)
(note 3)
Noise Figure
Typ/Max
Max
5.5/6.0
+/-2.0
+/-2.50
5.5/6.0
+/-2.0
+/-2.50
5.5/6.0
+/-2.0
+/-2.50
5.5/6.0
+/-2.0
+/-2.50
5.5/6.0
+/-2.0
+/-3.00
5.5/6.0
+/-2.0
+/-3.00
Static Gain Flatness
Dynamic Gain Flatness
(note 4)
Max
(note 5)
Output Power Stability
(dB)
Max
+/- 0.2
+/- 0.2
+/- 0.2
+/- 0.2
+/- 0.2
+/- 0.2
(note 6)
Power Consumption
(steady state regime)
20
15
35
20
45
25
55
30
65
40
70
45
50oC Case (premium)
50oC Case (economy)
(note7)
Psys (W)
Max
Remnant pump power
to output
Prp (dBm)
Nom.
<-30
<-30
<-30
<-30
<-30
<-30
Notes:
1. Unless stated otherwise all specifications apply over the full temperature range and humidity
2. Depending on the fiber optic patch cord interface the measured value can vary up to 0.5 dB less than the actual value.
3. Measured @ 25C, Pin = 0 dBm. Can be measured only after splitting output power
4. Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25C
5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @
25C;
6. Stability over polarization and temperature
7. Premium version – PONA with cooled, Telecordia qualified pumps
Economy version – PONA with uncooled pumps
Table for Determination of Minimal Output Optical Power per Port (dBm)
Minimum optical power per port (dBm)
PONA Models
Number of ports
3027 3030 3032 3033
3035
35
3037
37
1
2
27
30
32
33
23.5
20.2
16.8
13.4
26.5
23.2
19.8
16.4
28.5
25.2
21.8
18.4
29.5
26.2
22.8
19.4
31.5
28.2
24.8
21.4
33.5
30.2
26.8
23.4
4
8
16
32
64
10.0
7.0
13.0
10.0
15.0
12.0
16.0
13.0
18.0
15.0
20.0
17.0
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 3000 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Block Diagram: Cladding Pump Technology
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to
produce cost effective high power optical amplification. This technology enables the development of higher power EDFAs-
something that was cost inhibitor when using standard Erbium fiber and single mode pumps.
Er/Yb Assembly
Er
Input
Hybrid
Filter / Isolator
Isolator
1% Tap
980 nm
pump
Input
monitor
Output
Monitor
Multi-mode
pumps
Drive
Electronics
Sample FTTx Architecture
Splitter
ONT
ONT
ONT
ONT
OLT
Voice
1490nm
Businesses
Data
1310nm
- Voice
- Data
- Video
Splitter
Splitter
Splitter
WDM
1550nm
ONT
ONT
ONT
ONT
1550nm
Tx
Multi
Dwelling Units
Video
20 Km
RF
ONT
ONT
ONT
ONT
EDFA
20 outputs of 20
dBm
Homes
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 3000 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Outline Drawing
AC versions shown below with 8 optical output ports
DC versions shown below with 8 optical output ports
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 3000 Series
DATASHEET | JANUARY 2012
Ordering Information
PONA30
FIBER OPTICS
-
-
-
-
*
# of Output
Ports
Power Level
Connector Options
Class
Input Voltage
27: 27 dBm
30: 30 dBm
SC: SC/APC
01: 1 port
P: Premium
E: Economy
AC: 90-260 VAC 50/60 Hz
DC: -48 VDC
FC: FC/APC
02: 2 ports
32: 32 dBm
33: 33 dBm
35: 35 dBm
37: 37 dBm
EC: E2000/APC
TC: SC/UPC
04: 4 ports
08: 8 ports
16: 16 ports
GC: FC/UPC
SCDPLX: SC/APC Duplex
20: 20 ports
32: 32 ports
64: 64 ports
Class: Premium: Utilizes cooled pump lasers
Economy: Utilizes uncooled pump lasers
* PONA 3000 series with power higher then 30 dBm per port must have special output optical connector(s) and optical
bulkhead(s). Their type(s) must be verified prior to placing Purchase Order.
Compliance Information
FCC:
Subpart B. Part 15, Class “A” Unintentional Radiators
CE:EN50083-2
EN 61000-4-3
EN 55020
19995 with Amendment 1, which incorporates EN 55013 Radiated and Conducted Emissions
Radiated Immunity
Conducted Immunity
Harmonics
EN 61000-3-2
All Components meet Telecordia GR-1312 and GR-486 Standards (Except Pumps in Economy Class)
Fit Rate:
90% Level of Confidence < 2500 @ 30OC Premium PONA 3035
90% Level of Confidence < 2000 @ 30OC Economy PONA 3035
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 3000 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based
on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the
fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.
The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1545 ~ 1562 nm (dependant on input source)
Maximum Output Power = 5 W (single output, 37 dBm model)
.
|
REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA3033-GC-32-P-DC 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
PONA3033-SC-01-E-AC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-01-E-DC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-01-P-AC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-01-P-DC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-02-E-AC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-02-E-DC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-02-P-AC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-02-P-DC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-04-E-AC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 | |
PONA3033-SC-04-E-DC | EMCORE | Erbium Doped Fiber Amplifier | 获取价格 |
PONA3033-GC-32-P-DC 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6