PONA3035-EC-02-P-DC [EMCORE]
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount;型号: | PONA3035-EC-02-P-DC |
厂家: | EMCORE CORPORATION |
描述: | EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount 通信 放大器 PC 光纤 |
文件: | 总6页 (文件大小:339K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
PONA 3000 Series Erbium Doped Fiber Amplifier
Applications
•
•
•
•
High Performance Supertrunking Links
High Power Distribution Networks
Fiber Deep Architectures
FTTx Networks
Features
•
Full Function High Power Fiber Optic
Amplifier Ready for Integration
Low Noise Figure (Typ < 6 dB)
Total Input Power Range: –10 dBm to
+12 dBm
•
•
The ORTEL PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding
noise performance requirements of CATV and FTTx applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 3000 series optical amplifiers provide optical
isolation on the input and output of the gain block for stable, low noise
operation. The input and output optical signal power levels are
detected for monitoring and control. The input optical signal is
amplified with active gain control for a constant output power level, or
with active output power control for constant gain mode. The PONA
3000 series optical amplifiers also provide monitoring functions and
associated alarms for all vital characteristics. The optical output of the
PONA 3000 series optical amplifiers can be split into number of ports
by an optional internal splitter.
•
Total Output Power: +27 dBm to
+35 dBm (Optical Output Power
Splitter is Optional For These Units)
Standard RS-232 Communications
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
•
•
•
•
•
PONA3000 series includes AC/DC power supply, front panel, optical
splitters, network card and all necessary connectors.
1 of 6
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Specifications
PROPERTY
Product Code
UNIT
LIMIT
PONA MODELS
3030 3032
COMMENT
3027
+12
3035
+12
PERFORMANCE
Operating Input Power
Operating Input Power
(note 1)
Pin (dBm)
Pin (dBm)
Max
Min
+12
+12
-10
-10
-10
-10
Output Power
Noise Figure
Static Gain Flatness
Po (dBm)
NF (dB)
GF (dB)
27.0
30.0
5.5/6.0
+/-1.0
32.0
5.5/6.0
+/-1.0
35.0
5.5/6.0
+/-1.0
Nominal (note 2)
(note 3)
(note 4)
Typ/Max 5.5/6.0
Max
Max
Max
Max
+/-1.0
Dynamic Gain Flatness
Output Power Stability
(dB)
+/-2.00
+/- 0.25
+/-2.00
+/- 0.25
+/-2.25
+/-0.25
+/-2.50
+/- 0.25
(note 5)
(note 6)
50oC Case (premium)
50oC Case (economy)
(note7)
(dB)
Power Consumption
(steady state regime)
Psys (W)
40
25
50
30
65
40
80
50
Remnant pump power to output
Prp (dBm)
Nom.
<-30
<-30
<-30
<-30
Notes:
1) Unless stated otherwise all specifications apply over the full temperature range and humidity
2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value
3) Measured @ 25°C, ΣPin = 0 dBm
4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C
6) Stability over polarization and temperature
7) Premium version – PONA with cooled, Telcordia qualified pumps
Economy version – PONA with uncooled pumps
Physical
GENERAL PROPERTY
REQUIREMENT
COMMENTS
Operating Wavelength
1545 ~ 1562nm
Standard
Operating Case Temperature
Storage Temperature
Operating Humidity
Standard
Standard
Non-condensing
AC version
0°C to 50°C
-40°C to 85°C
20% to 85%
Voltage Supply Range
85 VAC to 265 VAC 50/60 Hz
-36 to -60 V DC
DC version
*(Redundant Power Supply is
Available by Customer Request)
Optical Connectors
See ordering information
19.0”W x 14.76”D x 3.44”H
User Specified
Dimensions In Inches
19’’ Rack Mounted, 2 RU
2 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Block Diagram: Cladding Pump Technology
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and
multi-mode pump lasers) to produce cost effective high power optical amplification. This technology
enables the development of higher power EDFAs-something that is cost prohibitive when using
standard erbium fiber and single mode pumps.
Er/Yb Assembly
Er
Input
Hybrid
Filter / Isolator
Isolator
1% Tap
980 nm
pump
Input
monitor
Output
Monitor
Multi-mode
pumps
Drive
Electronics
Sample FTTx Architecture
Splitter
ONT
ONT
OLT
Voice
Data
1490nm
ONT
ONT
Businesses
1310nm
- Voice
- Data
- Video
Splitter
20 Km
Splitter
Splitter
WDM
1550nm
ONT
ONT
ONT
ONT
1550nm
Tx
Multi
Dwelling Units
Video
RF
ONT
ONT
ONT
ONT
EDFA
20 outputs of 20
dBm
Homes
3 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Outline Drawing
AC and DC versions shown below with 8-port option
4 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV
laser product based on the maximum optical output power shown below. During use as intended, the
laser energy is fully contained within the fiber network such that there is no accessible laser radiation
and would meet the requirements for a Class I laser product. The laser product report has been
submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1545 ~ 1562 nm (dependant on input source)
Maximum Output Power = 3.2 W (single output, 35 dBm model)
5 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
PONA3000 Series High Power EDFA
PRELIMINARY DATA SHEET | OCTOBER 28, 2007
Ordering Information
*
PONA30
-
-
-
-
Power
Level
Connector
Options
# of Output
Ports
Class
Input Voltage
27: 27 dBm SC: SC/APC
30: 30 dBm FC: FC/APC
01: 1 port
P: Premium
E: Economy
AC: 90-260 VAC 50/60 Hz
DC: -48 VDC
02: 2 ports
04: 4 ports
08: 8 ports
16: 16 ports
20: 20 ports
32: 32 dBm EC: E2000/APC
35: 35 dBm TC: SC/UPC
GC: FC/UPC
2DC: Redundant DC
Class:
Premium: Utilizes cooled pump lasers
Economy: Utilizes uncooled pump lasers
* PONA3000 series with one or two optical outputs will have special high power output optical connector(s) and
optical bulkhead(s)
For exact model number, please contact your Sales Representative.
Qualifications
° FCC: Subpart B. Part 15, class “A” Unintentional Radiators
° CE: EN50083-2, 19995 with Amendment 1, which Incorporates EN 55013 Radiated and
Conducted Emissions
° EN 61000-4-3 Radiated Immunity
° EN 55020 Conducted Immunity
° EN 61000-3-2 Harmonics
° All Components Meet Telcordia GR-1312 and GR-486 Standards (Except Pumps in
Economy Class).
° EN 61000-3-2 Harmonics
° Fit Rate:
• 90% Level of Confidence < 2000 @ 30°C Premium PONA 3035
• 90% Level of Confidence < 3500 @ 30°C Economy PONA 3035
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
6 of 6
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2007. EMCORE Corporation
相关型号:
PONA3035-EC-08-E-AC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
PONA3035-EC-08-E-DC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
PONA3035-EC-08-P-AC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
PONA3035-EC-16-E-2DC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
PONA3035-EC-16-E-DC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
PONA3035-EC-20-E-AC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
PONA3035-EC-20-P-2DC
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, E2000/APC Connector, Panel Mount
EMCORE
©2020 ICPDF网 联系我们和版权申明