PONA3035GC4EAC [EMCORE]
EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, FC Connector, Panel Mount-inline;型号: | PONA3035GC4EAC |
厂家: | EMCORE CORPORATION |
描述: | EDFA Amplifier, 1545nm Min, 1562nm Max, 1dB, FC Connector, Panel Mount-inline 放大器 光纤 |
文件: | 总5页 (文件大小:459K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET | FEBRUARY 2006
PONA 3000 Series Erbium Doped Fiber Amplifier
Applications
•
•
•
•
High performance supertrunking links
High power distribution networks
Fiber Deep architectures
FTTx networks
Features
•
Full Function High Power Fiber Optic
Amplifier Ready for Integration
Low Noise Figure (Typ < 6 dB)
Total Input Power Range: –10 dBm to
+12 dBm
•
•
The ORTEL PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding
noise performance requirements of CATV and FTTx applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 3000 series optical amplifiers provide optical
isolation on the input and output of the gain block for stable, low noise
operation. The input and output optical signal power levels are
detected for monitoring and control. The input optical signal is
amplified with active gain control for a constant output power level, or
with active output power control for constant gain mode. The PONA
3000 series optical amplifiers also provide monitoring functions and
associated alarms for all vital characteristics. The optical output of the
PONA 3000 series optical amplifiers can be split into number of ports
by an optional internal splitter.
•
•
Total Output Power: +30 dBm to +35
dBm (optical output power splitter is
optional for these units)
Standard RS-232 Communications
(RS-485 or I2C - optional)
•
•
•
•
Low Electrical Power Consumption
Input / Output Isolation > 40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
PONA3000 series includes AC/DC Power Supply, Front Panel,
Optical Splitters, network card and all necessary connectors.
1 of 5
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
PONA3000 Series High Power EDFA
Revision C
DATA SHEET | FEBRUARY 2006
Specifications
PROPERTY
Product Code
UNIT
LIMIT
PONA MODELS
3032
COMMENT
3030
+12
3035
+12
PERFORMANCE
Operating Input Power
Operating Input Power
(note 1)
Pin (dBm)
Pin (dBm)
Max
+12
Min
-10
-10
-10
Output Power
Noise Figure
Static Gain Flatness
Po (dBm)
NF (dB)
GF (dB)
30.0
5.5/6.0
+/-1.0
32.0
5.5/6.0
+/-1.0
35.0
5.5/6.0
+/-1.0
Nominal (note 2)
(note 3)
(note 4)
Typ/Max
Max
Dynamic Gain Flatness
Output Power Stability
(dB)
Max
Max
Max
+/-2.00
+/- 0.25
+/-2.25
+/- 0.25
+/-2.50
+/- 0.25
(note 5)
(note 6)
50oC Case (premium)
50oC Case (economy)
(note7)
(dB)
Power Consumption
(steady state regime)
Psys (W)
50
30
65
40
80
50
Remnant pump power to output
Prp (dBm)
Nom.
<-30
<-30
<-30
Notes:
1) Unless stated otherwise all specifications apply over the full temperature range and humidity
2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value.
3) Measured @ 25°C, ΣPin = 0 dBm
4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C;
6) Stability over polarization and temperature
7) Premium version – PONA with cooled, Telcordia qualified pumps
Economy version – PONA with uncooled pumps
Physical
GENERAL PROPERTY
REQUIREMENT
COMMENTS
Operating Wavelength
1545 ~ 1562nm
Standard
Operating Case Temperature
Storage Temperature
Operating Humidity
Standard
Standard
Non-condensing
AC version
0°C to 50°C
-40°C to 85°C
20% to 85%
Voltage Supply Range
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
DC version
*(Redundant Power Supply is
available by Customer request
Optical Connectors
See ordering information
19.0”W x 14.76”D x 3.44”H
User Specified
Dimensions In Inches
19’’ Rack Mounted, 2 RU
2 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
PONA3000 Series High Power EDFA
DATA SHEET | FEBRUARY 2006
Revision C
Block Diagram: Cladding Pump Technology
Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and
multi-mode pump lasers) to produce cost effective high power optical amplification. This technology
enables the development of higher power EDFAs-something that was cost inhibitor when using
standard Erbium fiber and single mode pumps.
Er/Yb Assembly
Er
Input
Hybrid
Filter / Isolator
Isolator
1% Tap
980 nm
pump
Input
monitor
Output
Monitor
Multi-mode
pumps
Drive
Electronics
Sample FTTx Architecture
Splitter
ONT
ONT
OLT
Voice
Data
1490nm
ONT
ONT
Businesses
1310nm
- Voice
- Data
- Video
Splitter
20 Km
Splitter
Splitter
WDM
1550nm
ONT
ONT
ONT
ONT
1550nm
Tx
Multi
Dwelling Units
Video
RF
ONT
ONT
ONT
ONT
EDFA
20 outputs of 20
dBm
Homes
3 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
PONA3000 Series High Power EDFA
DATA SHEET | FEBRUARY 2006
Revision C
Form Factor
4 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
PONA3000 Series High Power EDFA
DATA SHEET | FEBRUARY 2006
Revision C
Ordering Information
PONA30
-
-
-
-
Power
Level
Connector
Options
# of Output
Ports
Class
Input Voltage
30: 30 dBm SC: SC/APC
32: 32 dBm FC: FC/APC
01: 1 port
P: Premium
E: Economy
AC: 90-260 VAC 50/60 Hz
DC: -48 VDC
02: 2 ports
04: 4 ports
08: 8 ports
16: 16 ports
35: 35 dBm EC: E2000/APC
TC: SC/UPC
GC: FC/UPC
20: 20 ports
Class:
Premium: Utilizes cooled pump lasers
Economy: Utilizes uncooled pump lasers
Qualifications
ꢀ FCC: Subpart B. Part 15, class “A” Unintentional Radiators
ꢀ CE: EN50083-2, 19995 with Amendment 1, which incorporates EN 55013 Radiated and
Conducted Emissions
ꢀ EN 61000-4-3 Radiated Immunity
ꢀ EN 55020 Conducted Immunity
ꢀ EN 61000-3-2 Harmonics
ꢀ All components meet Telcordia GR-1312 and GR-486 standards (Except pumps in
Economy Class).
ꢀ EN 61000-3-2 Harmonics
ꢀ Fit Rate:
• 90% level of confidence < 2000 @ 30°C Premium PONA 3035
• 90% level of confidence < 3500 @ 30°C Economy PONA 3035
5 of 5
Ortel, a division of EMCORE
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2003. EMCORE Corporation
相关型号:
PONA3035SC16EAC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
PONA3035SC16EDC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
PONA3035SC16PAC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
PONA3035SC16PDC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
PONA3035SC20EAC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
PONA3035SC20EDC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
PONA3035SC20PAC
FIBER OPTIC EDFA AMPLIFIER, 1545-1562nm, 1dB, PANEL MOUNT-INLINE, SC CONNECTOR
EMCORE
©2020 ICPDF网 联系我们和版权申明