SS-3442-19-10-FA-12-35-1 [EMCORE]
Optiva OTS-2 C-Band RF Fiber Optic Links;
| 型号： | SS-3442-19-10-FA-12-35-1 |
| 厂家： | 
EMCORE CORPORATION |
| 描述： | Optiva OTS-2 C-Band RF Fiber Optic Links |
| 文件： | 总7页 (文件大小：1762K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
The Optiva OTS-2 C-Band transmitter and receiver are ideal to
construct downlink 3.400 to 4.200 GHz and uplink 5.850 to
6.725 GHz transparent fiber optic links for antenna remoting,
electronic warfare systems, broadband delay lines, signal processing
systems and other high-dynamic-range applications.
Optiva satellite and microwave transmitters and receivers are SNMP
compliant. They can be housed in the same chassis and monitored by the same
Network Management System (NMS) as Optiva HD video, audio, serial data, and
USB extension / distribution cards to provide multiple format and frequency
transport in a single flexible platform.
Applications
System Design
Satcom C-Band Antenna Signal Distribution
Ground Terminal & Intra-Facility Links
Site Diversity Systems
The Optiva platform includes a wide range fiber
optic transport products for satellite and microwave
communications from 1 MHz to 40 GHz. These units can be used to construct
transparent inter- and intra-facility links from 1 meter to >100 km for RF and
microwave signal transport, antenna remoting, video transport, electronic
warfare systems and other high-dynamic-range applications.
Electronic Warfare (EW) Systems
Broadband Delay Line and Signal Processing
Systems
Features / Benefits
Optiva is a completely modular, hot-swappable platform. Both 19” rack-mount
and compact tabletop, or wall-mountable enclosures are available. The 3 RU 19”
rack-mount, fan-cooled enclosures (Model OT-CC-16 and OT-CC-16F) can support
up to 16 insert cards and utilize two dual-redundant, hot-swappable, 100 or 200
watt power supplies. The 1 RU 19” rack-mount, fan-cooled enclosure (Model: OT-
CC-6-1U) can accommodate 6 insert cards and utilizes two hot-swappable 60 watt
power supplies. Compact one-slot (OT-DTCR-1), or two-slot (OT-DTCR-2) enclosures
are also available that use an external wall-mount power supply.
C-Band Uplink and Downlink - Eliminates the
performance and cost penalty of block up/
down conversion
Low RIN Source Laser - Provides high-
dynamic-range of >102 dB Hz2/3
Microprocessor-Based Transmitter Control
for Laser Bias, Modulator Bias & Link Gain
- Provides consistent high performance
operation and allows for modulator low-bias
operation and SFDR >102 dB Hz2/3
Block Diagram
SNMP V.1 and RS-232 Monitor & Control
Interface - Flexible user interface options
Transmitter
Receiver
Compatible with EMCORE’s Modular Optiva
Platform - Allows multiple format and
frequency transport in a single chassis
Externally
Modulated
Transmitter
RF
PL
PR
in
RF
out
Photodiode
Variable
Gain RF
Preamp
Variable
Gain RF
Postamp
DWDM Operation - Increases transport
Laser/Modulator
Microprocessor
Control
Optical Preamp/Rx
Microprocessor
Control
capacity without increasing fiber count
-20 dB RF
Test Point
Optical Output
+10 dBmo min
Optical Input
+11.8 dBmo max
-20 dB RF
Test Point
© 2013 EMCORE Corporation | REV 2013.10
+1 626-293-3400
satcom-sales@emcore.com
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
Performance Highlights
Typical C-Band Downlink S21
Frequency Response
Parameter
Min
Typical
Max
Units
Frequency Range
RF Input Power
3.400
5.850
-
-
4.200
6.725
GHz
GHz
-
-
dBm
5*
-15^
Wavelength
-
9
1550
10
-
11
50
nm
Optical Output Power
dBmo
°
Operating Temperature Range
-10
-
C
*Tx: RF amp 15 dB gain, attenuation range 0 to 15 dB
^Tx: RF amp 35 dB gain, attenuation range 0 to 15 dB
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage
to the device. These are absolute stress ratings only. Functional operation of the
device is not implied at these or any other conditions in excess of those given in
the operational sections of the datasheet. Exposure to absolute maximum ratings
for extended periods can adversely affect device reliability.
Typical C-Band Uplink S21
Frequency Response
Parameter
Operating Temperature
Symbol
TOP
Min
-20
-40
Max
60
Units
°
C
°
Storage Temperature
RF Input
TSTG
85
C
Sin
NA
dBm
5*
-15^
*Tx: RF amp 15 dB gain
^Tx: RF amp 35 dB gain
Environmental Specifications
Parameter
Operating Temperature
Symbol
Min
-10
--
Max
50
Units
Enclosure Options
TOP
°C
--
Operating Humidity, Maximum Non-Condensing
95%
Operating Altitude, Above Sea Level
--
6000
ft
--
1828.8
m
Storage Temperature
TSTG
--
-40
--
70
°C
Storage Humidity, Maximum Non-Condensing
Storage Altitude, Above Sea Level
95%
--
--
50,000
15,240
ft
--
m
© 2013 EMCORE Corporation | REV 2013.10
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
Transmitter & Receiver Optical Characteristics
Parameter
Symbol
Condition
Min
1530
9
Typical
1550
10
Max
1562
11
Units
nm
-
Wavelength
l
Optical Output Power
Connector Return Loss
Optical Connector Type
Receiver Optical Input Power
Receiver Responsivity
PL
-
dBmo
-
-
-
40
-
-
-
-
-
-
dB
-
-
+10
-
SC/APC
-
dBmo
A/W
Pin
-
-
-
0.7
Note: In order to prevent reflection-induced distortion degradation, the laser should be connected to an optical cable having a return loss of at least 55 dB for discrete reflections
and 30 dB for distributed reflections.
C-Band Transmitter & Receiver RF Characteristics
Parameter
Condition
Min
Typical
Max
Units
-
Operational Bandwidth
3.400
5.850
-
-
4.200
6.725
GHz
GHz
Ω
RF Input Impedance
RF Return Loss
-
-
-
50
-
-
-
SMA Female
-20
-15
dB
RF Connectors
-
-18
-22
dB
RF Test Point Reference Value, Relative to RF input or RF output*
*Test point performance beyond the stated frequency range is provided; only the test point reference value tolerance may increase beyond the above stated +/- 1 dB
DC Power Consumption - Max
Module Type
Transmitter
Receiver
Input Voltage (VDC)
Max Current (@+70°C)
1 A
+12
+12
750 mA
Network Management
All modules are compliant with SNMP v.1 supported through the Optiva NMS card (OPV-CTLR-IC)
© 2013 EMCORE Corporation | REV 2013.10
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
Link Performance - C-Band Downlink
Parameter
Symbol
Condition
Min
Typical
Max
Units
-
-
RF Bandwidth
3.400
-
4.200
GHz
G
G
@ 3.400 GHz
@ 4.200 GHz
0
0
4
4
-
-
dB
dB
Link Gain (+0 dBmo Rx optical input)*^
@ 3.400 GHz
@ 4.200 GHz
20
20
24
24
-
-
dB
dB
G
G
Link Gain (+10 dBmo Rx optical input)*^
Noise Figure (+0 dBmo Rx optical input)^
Noise Figure (+10 dBmo Rx optical input)^
Input IP3^
@ 3.400 GHz
@ 4.200 GHz
@ 3.400 GHz
@ 4.200 GHz
@ 3.400 GHz
@ 4.200 GHz
12
12
7
-
-
-
-
-
-
-
-
dB
dB
NF
NF
-
dB
NF
7
-
dB
NF
-
-6
-5
dBm
dBm
IIP3
IIP3
-
2/3
@ 0 dBmo Rx Optical Input
101
105
-
-
-
-
dB-Hz
SFDR
SFDR
Spurious Free Dynamic Range^
Gain Variation
2/3
dB-Hz
@ +10 dBmo Rx Optical Input
-
-
-
-
0.5
1.5
dB
dB
-
-
Any 36 MHz
Any 500 MHz
*Receiver RF output will change 2 dB for each 1 dB of Rx optical input power level change
^Performance based on OTS-2T/S5 with RF Amp gain of 35 dB, OTS-2R/S5 with RF Amp gain of 15 dB
Link Performance - C-Band Uplink
Parameter
Symbol
Condition
Min
Typical
Max
Units
-
-
RF Bandwidth
5.850
-
6.725
GHz
G
G
@ 5.850 GHz
@ 6.725 GHz
-2
-2
2
2
-
-
dB
dB
Link Gain (+0 dBmo Rx optical input)*^
@ 5.850 GHz
@ 6.725 GHz
@ 5.850 GHz
@ 6.725 GHz
18
18
12
12
22
22
-
-
-
-
-
dB
dB
dB
dB
G
G
Link Gain (+10 dBmo Rx optical input)*^
Noise Figure (+0 dBmo Rx optical input)^
Noise Figure (+10 dBmo Rx optical input)^
Input IP3^
NF
NF
-
@ 5.850 GHz
@ 6.725 GHz
7
7
-
-
-
-
dB
dB
NF
NF
@ 5.850 GHz
@ 6.725 GHz
-
-6
-5
-
-
-
dBm
dBm
IIP3
IIP3
SFDR
SFDR
-
-
101
105
-
2/3
@ 0 dBmo Rx Optical Input
@ +10 dBmo Rx Optical Input
--
dB-Hz
Spurious Free Dynamic Range^
Gain Variation
2/3
-
--
dB-Hz
-
0.5
1.5
dB P-P
dB P-P
Any 36 MHz
-
-
-
Any 500 MHz
*Receiver RF output will change 2 dB for each 1 dB of RX optical input power level change
^Performance based on OTS-2T/S5 with RF Amp gain of 35 dB, OTS-2R/S5 with RF Amp gain of 15 dB
© 2013 EMCORE Corporation | REV 2013.10
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
Ordering Information: Transmitter
Transmitter
OTS-2T / S5-VVVV-WW-10-XX-12-YY-Z
When ordering replace “VVVV” with one of the C-Band Frequency Options
When ordering replace “WW” with one of the ITU Channel Options
When ordering replace “XX” with one of the Optical Connector Options
When ordering replace “YY” with one of the Variable Gain RF Amplifier Options
When ordering replace “Z” with one of the Enclosure Options
RF Connector
C-Band Frequency
Options (GHz)
“VVVV”
ITU Channel Options
(THz / nm)
Optical Power
(dBmo)
Optical
Connector
Options
“XX”
Optical Output +
RF Test Port (dB)
Variable Gain
RF Amplifier
Options (dB)
“YY”
Enclosure Options
“Z”
“WW”
S5 = 50 Ω SMA
3442 = 3.400-4.200 GHz Standard:
10 = +10 Optical
Standard:
SA = SC / APC
1 = Single Optical Output + 15 = 15 dB
2 = -20 dB Test Port
1 = Optiva Indoor
Rack-Mount
Uplink
00 = non-ITU: 1520-1580 nm Output
35 = 35 dB
Installation
5867 = 5.850-6.725 GHz Optional:
Optional:
Downlink
18 = 191.8 THz/1563.05 nm
FA = FC / APC
EA = E2000 / APC
2 = Optiva Outdoor
MiniHub Installation
19 = 191.9 THz/1562.23 nm
20 = 192 THz/1561.42 nm
21 = 192.1 THz/1560.61 nm
22 = 192.2 THz/1559.79 nm
23 = 192.3 THz/1558.98 nm
24 = 192.4 THz/1558.17 nm
25 = 192.5 THz/1557.36 nm
26 = 192.6 THz/1556.56 nm
27 = 192.7 THz/1555.75 nm
28 = 192.8 THz/1554.94 nm
29 = 192.9 THz/1554.13 nm
30 = 193 THz/1553.33 nm
31 = 193.1 THz/1552.52 nm
32 = 193.2 THz/1551.72 nm
33 = 193.3 THz/1550.92 nm
34 = 193.4 THz/1550.12 nm
35 = 193.5 THz/1549.32 nm
36 = 193.6 THz/1548.51 nm
37 = 193.7 THz/1547.72 nm
38 = 193.8 THz/1546.92 nm
39 = 193.9 THz/1546.12 nm
40 = 194 THz/1545.32 nm
41 = 194.1 THz/1544.53 nm
42 = 194.2 THz/1543.73 nm
43 = 194.3 THz/1542.94 nm
44 = 194.4 THz/1542.14 nm
45 = 194.5 THz/1541.35 nm
46 = 194.6 THz/1540.56 nm
47 = 194.7 THz/1539.77 nm
48 = 194.8 THz/1538.98 nm
49 = 194.9 THz/1538.19 nm
50 = 195 THz/1537.4 nm
51 = 195.1 THz/1536.61 nm
52 = 195.2 THz/1535.82 nm
53 = 195.3 THz/1535.04 nm
54 = 195.4 THz/1534.25 nm
55 = 195.5 THz/1533.46 nm
56 = 195.6 THz/1532.68 nm
57 = 195.7 THz/1531.9 nm
58 = 195.8 THz/1531.12 nm
59 = 195.9 THz/1530.33 nm
60 = 196 THz/1529.55 nm
61 = 196.1 THz/1528.77 nm
62 = 196.2 THz/1527.99 nm
© 2013 EMCORE Corporation | REV 2013.10
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
Ordering Information: Receiver
Receiver
OTS-2R / S5-VVVV-10-WW-XX-2-YY-Z
When ordering replace “VVVV” with one of the C-Band Frequency Options
When ordering replace “WW” with one of the Optical Connector Options
When ordering replace “XX” with one of the ITU Channel Options
When ordering replace “YY” with one of the Variable Gain RF Amplifier Options
When ordering replace “Z” with one of the Enclosure Options
RF Connector
C-Band Frequency
Options (GHz)
“VVVV”
Optical Power (dBmo)
Optical
Connector
Options
“WW”
ITU Filter Options
for Improved Optical
Isolation in DWDM
Systems (THz / nm)
“XX”
Test Port (dB)
Variable
Gain RF
Amplifier
Options (dB)
“YY”
Enclosure Options
“Z”
S5 = 50 Ω SMA 3442 = 3.400-4.200 GHz
10 = +10 Max Optical
Input
Standard:
SA = SC / APC
Standard:
00 = No filter
2 = -20 dB Test Port 15 = 15 dB
35 = 35 dB
1 = Optiva Indoor Rack-
Mount Installation
Uplink
5867 = 5.850-6.725 GHz
Downlink
Optional:
FA = FC / APC
Optional:
18 = 191.8 THz/1563.05 nm
2 = Optiva Outdoor
MiniHub Installation
EA = E2000 / APC 19 = 191.9 THz/1562.23 nm
20 = 192 THz/1561.42 nm
21 = 192.1 THz/1560.61 nm
22 = 192.2 THz/1559.79 nm
23 = 192.3 THz/1558.98 nm
24 = 192.4 THz/1558.17 nm
25 = 192.5 THz/1557.36 nm
26 = 192.6 THz/1556.56 nm
27 = 192.7 THz/1555.75 nm
28 = 192.8 THz/1554.94 nm
29 = 192.9 THz/1554.13 nm
30 = 193 THz/1553.33 nm
31 = 193.1 THz/1552.52 nm
32 = 193.2 THz/1551.72 nm
33 = 193.3 THz/1550.92 nm
34 = 193.4 THz/1550.12 nm
35 = 193.5 THz/1549.32 nm
36 = 193.6 THz/1548.51 nm
37 = 193.7 THz/1547.72 nm
38 = 193.8 THz/1546.92 nm
39 = 193.9 THz/1546.12 nm
40 = 194 THz/1545.32 nm
41 = 194.1 THz/1544.53 nm
42 = 194.2 THz/1543.73 nm
43 = 194.3 THz/1542.94 nm
44 = 194.4 THz/1542.14 nm
45 = 194.5 THz/1541.35 nm
46 = 194.6 THz/1540.56 nm
47 = 194.7 THz/1539.77 nm
48 = 194.8 THz/1538.98 nm
49 = 194.9 THz/1538.19 nm
50 = 195 THz/1537.4 nm
51 = 195.1 THz/1536.61 nm
52 = 195.2 THz/1535.82 nm
53 = 195.3 THz/1535.04 nm
54 = 195.4 THz/1534.25 nm
55 = 195.5 THz/1533.46 nm
56 = 195.6 THz/1532.68 nm
57 = 195.7 THz/1531.9 nm
58 = 195.8 THz/1531.12 nm
59 = 195.9 THz/1530.33 nm
60 = 196 THz/1529.55 nm
61 = 196.1 THz/1528.77 nm
62 = 196.2 THz/1527.99 nm
© 2013 EMCORE Corporation | REV 2013.10
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
SATCOM
Mechanical Configuration
Each Transmitter and Receiver module occupies two slots in the EMCORE Optiva Chassis.
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser
product. All versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007. An ad-
ditional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output with
certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an
eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed for
use at a distance (for example: telescopes and binoculars) may pose an eye hazard.
Wavelength = 1.3/1.5 μm.
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE
TO BEAM
INVISIBLE LASER RADIATION IS
EMITTED FROM THE END OF
FIBER OR CONNECTOR
Maximum power = 30 mW.
Wavelength: 1.5 µm
Max. Output: 50 mW
Class 1M Laser Product
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
CLASS 1M LASER PRODUCT IEC 60825-1:2007 EN 60825-1:2007
MAX OUTPUT: 50 mW WAVELENGTH: 1.5 µm (+ 1460 to 1620 nm)
Complies with 21 CRF 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007
G8760-073-001 REV.3
*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
*IEC is a registered trademark of the International Electrotechnical Commision.
© 2013 EMCORE Corporation | REV 2013.10
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明