LDO03C-005W05-HJ

更新时间:2024-09-18 07:31:17
描述:LDO03C Series

LDO03C-005W05-HJ 概述

LDO03C Series LDO03C系列

LDO03C-005W05-HJ 数据手册

通过下载LDO03C-005W05-HJ数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Embedded Power for  
Business-Critical Continuity  
Rev. 01.29.09  
LDO03C  
1 of 4  
LDO03C Series  
15 Watts  
Total Power:  
15 Watts  
Input Voltage: 3-13.8 Vdc  
No. of Outputs: Single  
Electrical Specifications  
Output  
Output voltage  
Output setpoint accuracy  
Line regulation  
Load regulation  
Min./max. load  
Overshoot  
See Note 5  
0.59-5.1 V  
0.1% trim resistors  
Low line to high line  
Full load to min. load  
±1.0%  
±0.5%  
±0.5%  
0 A/3 A  
At turn-on  
At turn-off  
See Note 1  
0.5% max.  
100 mV max.  
25 mV  
Special Features  
Undershoot  
• 3 A output current rating  
• Input voltage range:  
3-13.8 Vdc  
Ripple and noise  
5 Hz to 20 MHz  
Vin=5 V, Vout=2.5 V  
Transient response  
See Notes 1, 2  
235 mV max. deviation  
20 μs recovery to within  
regulation band  
• Adjustable out voltage:  
0.59-5.1 V  
• Optional factory setting with  
power good  
• Excellent transient response  
• Power enable  
• Minimum airflow  
• Small package  
Input  
Input voltage range  
3-13.8 Vdc  
Input current  
Minimum load  
Remote OFF  
50 mA  
5 mA  
• Termination voltage  
capability  
• RoHS compliant  
Input current (max.)  
Start-up time  
See Note 3  
3 A @ lo max.  
Power up  
Remote ON/OFF  
3 ms  
2 ms  
General  
Efficiency (high input)  
Switching frequency  
Material flammability  
Weight  
Vin=5 V, Vo=2.5 V, lo=3 A  
Fixed  
90%  
1.5 MHz  
UL94V-0  
1.7 g (0.06 oz.)  
10,000,000 hours  
MTBF  
12 V @ 40 °C, 100% load  
Bellcore 332  
Coplanarity  
Surface mount models  
150μm  
Safety  
UL, cUL 60950-1  
TÜV Product Service (EN60950)  
Certificate No. TBD  
CB Report and  
Certificate to IEC60950  
Embedded Power for  
Business-Critical Continuity  
Rev.01.29.09  
LDO03C  
2 of 4  
Environmental Specifications  
Thermal performance  
See Note 5  
Operating ambient  
-40 °C to +85 °C  
-40 °C to +125 °C  
Non-operating ambient  
Protection  
Short-circuit  
Hiccup, non-latching  
Hiccup, non-latching  
Overvoltage protection  
Recommended System Capacitance  
Input  
See Note 6  
0 μF  
0 μF  
Output  
See Note 7  
Ordering Information  
Output  
Output  
Output  
Power  
(Max.)  
Input  
Voltage  
Output  
Voltage  
Current Current Efciency  
Regulation  
Line Load  
Model  
(Min.)  
0 A  
(Max.)  
3 A  
(Typical)  
90%  
Number (3,5)  
15W  
15W  
15W  
3-13.8 Vdc  
3-13.8 Vdc  
3-13.8 Vdc  
0.59-5.1 V  
0.59-5.1 V  
0.59-5.1 V  
±0.2% ±0.5%  
±0.2% ±0.5%  
±0.2% ±0.5%  
LDO03C-005W05-VJ  
LDO03C-005W05-HJ  
LDO03C-005W05-SJ  
0 A  
3 A  
90%  
0 A  
3 A  
90%  
Part Number System with Options  
Product Family  
Rated Output  
Performance  
Input Voltage  
Number of Pins  
Output Voltage  
Mounting Option  
Custom Option  
RoHS Compliance  
Current  
Type of Output  
LDO  
03  
C
-
00  
5W  
05  
-
V
X
J
Product Family  
LDO = LDO Series  
Rated Output  
Current  
03 = 3 Amp  
Performance  
C = Cost  
Input Voltage  
00 = 3-13.8 V  
Type of Output  
5W = 5 Pins and  
Wide Output  
Output Voltage  
05 = 0.59-5.1 V  
Mounting Option  
V = Vertical  
H = Horizontal  
S = Horizontal SMT  
VS = Vertical SMT  
Custom Option  
RoHS Compliance  
J
= Pb free (RoHS  
6/6 compliant)  
Optimized  
Output Voltage Adjustment of the LDO03C Series  
The ultra-wide output voltage trim range offers major advantages to users who select the  
LDO03C series. It is no longer necessary to purchase a variety of modules in order to cover  
different output voltages. The output voltage can be trimmed in a range of 0.59-5.1 Vdc.  
When the LDO03C converter leaves the factory, the output has been adjusted to the default  
voltage of 0.59 V.  
Notes:  
1. Measured as per recommended system capacitance. See Technical Reference Note.  
2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50.  
3. External input fusing is recommended.  
4. Additional part numbers may be available with different output voltages.  
5. Airflow dependent, 100 LFM minimum required.  
6. No capacitors needed for ripple current stability.  
7. No capacitors needed for stability.  
8. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request,  
please consult your local sales representative for details.  
9. NOTICE: Some models do not support all options. Please contact your local Emerson  
Network Power representative or use the on-line model number search tool at http://  
www.powerconversion.com/powergroup/products.htm to find a suitable alternative.  
Embedded Power for  
Business-Critical Continuity  
Rev. 01.29.09  
LDO03C  
3 of 4  
Mechanical Drawings  
Vertical Mount  
Dimensions in inches (mm). Tolerances es (unless otherwise specied) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25)  
.212  
.370  
LDO03C-005W05-VJ  
D/C: ZYWWRR  
.610  
Pin 1  
.16  
.025 SQ. PIN  
.051  
.067  
TYP  
.050  
Horizontal Mount  
.292  
.370  
.131  
LDO03C-005W05-HJ  
D/C: ZYWWRR  
.610  
.540  
.025 SQ PIN  
Pin 1  
.051  
.125  
.067  
TYP  
.120  
Embedded Power for  
Business-Critical Continuity  
Rev. 01.29.09  
LDO03C  
4 of 4  
Americas  
Mechanical Drawings (Cont'd)  
5810 Van Allen Way  
Carlsbad, CA 92008  
USA  
Horizontal Surface Mount  
Telephone: +1 760 930 4600  
Facsimile: +1 760 930 0698  
.025  
TYP  
Europe (UK)  
Waterfront Business Park  
Merry Hill, Dudley  
West Midlands, DY5 1LX  
United Kingdom  
Telephone: +44 (0) 1384 842 211  
Facsimile: +44 (0) 1384 843 355  
.315 MAX  
.370  
.131  
Asia (HK)  
16th - 17th Floors, Lu Plaza  
2 Wing Yip Street, Kwun Tong  
Kowloon, Hong Kong  
Telephone: +852 2176 3333  
Facsimile: +852 2176 3888  
LDO03C-005W05-SJ  
D/C: ZYWWRR  
.610  
.051  
.540  
For global contact, visit:  
www.powerconversion.com  
For technical support, visit:  
http://www.powerconversion.  
com/support/product/techni-  
cal-support.php  
.040 TYP  
Pin 1  
.067  
TYP  
While every precaution has been taken to ensure  
accuracy and completeness in this literature, Emerson  
Network Power assumes no responsibility, and disclaims  
all liability for damages resulting from use of this  
information or for any errors or omissions.  
Pin Assignments  
Printed in U.S.A.  
Issue SF3  
Single Output  
1. Enable  
Emerson Network Power.  
The global leader in enabling  
business-critical continuity.  
2. Vin  
3. Common/RTN  
4. Vout  
AC Power  
5. PG/Trim  
Connectivity  
6. Mech Pin (Horz/SMT only)  
DC Power  
Embedded Power  
Inbound Power  
Integrated Cabinet Solutions  
Outside Plant  
Precision Cooling  
Site Monitoring and Services  
EmersonNetworkPower. com  
*This is a Preliminary Datasheet. Emerson Network  
Power reserves the right to make changes to the  
information contained herein without notice and  
assumes no liability as a result of its use or application.  
Emerson Network Power and the Emerson  
Network Power logo are trademarks and  
service marks of Emerson Electric Co.  
©2008 Emerson Electric Co.  

LDO03C-005W05-HJ 相关器件

型号 制造商 描述 价格 文档
LDO03C-005W05-SJ ARTESYN Single Output C Class Non-Isolated DC/DC Converter 获取价格
LDO03C-005W05-SJ EMERSON-NETWORKPOWER LDO03C Series 获取价格
LDO03C-005W05-VJ ARTESYN Single Output C Class Non-Isolated DC/DC Converter 获取价格
LDO03C-005W05-VJ EMERSON-NETWORKPOWER LDO03C Series 获取价格
LDO06C ARTESYN Single Output 6 A DC-DC C Class Non-Isolated DC/DC Converter 获取价格
LDO06C EMERSON-NETWORKPOWER 6 A output current rating 获取价格
LDO06C-005W05-HJ ARTESYN Single Output 6 A DC-DC C Class Non-Isolated DC/DC Converter 获取价格
LDO06C-005W05-HJ EMERSON-NETWORKPOWER 6 A output current rating 获取价格
LDO06C-005W05-SJ ARTESYN Single Output 6 A DC-DC C Class Non-Isolated DC/DC Converter 获取价格
LDO06C-005W05-SJ EMERSON-NETWORKPOWER 6 A output current rating 获取价格

LDO03C-005W05-HJ 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6