SXE15-48S3V3J [EMERSON-NETWORKPOWER]
DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 1; DC -DC转换器10.8-15 W高效率DC - DC转换器1型号: | SXE15-48S3V3J |
厂家: | EMERSON NETWORK POWER |
描述: | DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 1 |
文件: | 总2页 (文件大小:125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SXE15 Series
S i n g l e o u t p u t
• High efficiency topology, 87% typical at 5 V
• Wide operating temperature, up to and exceeding 70 ˚C
(natural convection)
• 90% to 110% output trim
• No minimum load
• Overvoltage protection
• Remote ON/OFF control
• Available RoHS compliant
The SXE15 is a new high efficiency open frame isolated 15 Watt converter series in
an industry standard footprint. All models in the series feature an input voltage range
of 33 Vdc to 75 Vdc and are available in output voltages of 12 V, 5 V, 3.3 V, 2.5 V
and 1.8 V. The output voltage on each model is adjustable from 90% to 110% of the
nominal value. Typical efficiencies for the models are 87% for the 5 V, 86% for the
3.3 V, 85% for the 2.5 V and 12 V and 83% for the 1.8 V version. The SXE15 series
also has a remote ON/OFF capability with active high or active low logic.
Overcurrent and overvoltage protection features are included as standard. With full
international safety approval including EN60950 and cUL1950, the SXE15 reduces
compliance costs and time to market.
TÜV
2 YEAR WARRANTY
SPECIFICATIONS
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Voltage adjustability
90% to 110%
±±% maꢀ.
Conducted emissions
EN55022 (See Note 3)
EN55022 (See Note 3)
EN55022 (See Longform Datasheet) Level B
Level A
Level B
Total error band
(See Note 13)
Radiated emissions
Immunity:
ESD air
ESD contact
Radiated field enclosure EN61000-±-3 10 V/m
Conducted (dc power) EN61000-±-6 10 V
Line regulation
Low line to high line
1.8 V and 2.5 V models
3.3 V and 5 V models
0.5% maꢀ.
0.1% maꢀ.
EN61000-±-2 8 kV, 15 kV
EN61000-±-2 6 kV, 8 kV
Load regulation
Full load to min. load
1.8 V model
2.0% maꢀ.
1.5% maꢀ.
0.5% maꢀ.
2.5 V model
3.3 V and 5 V models
Conducted (signal)
Input transients
EN61000-±-6 10 V
ETS 300 132-2, ETR 283
(See Note 11)
Minimum load
(See Note 12)
0%
Overshoot
At turn-on and turn-off
1.8 V and 2.5 V models
3.3 V and 5 V models
±% maꢀ.
None
GENERAL SPECIFICATIONS
Efficiency
See table
1500 Vdc
Undershoot
None
Ripple and noise
(See Note 1)
5 Hz to 20 MHz
1.8 V and 2.5 V models
3.3 V and 5 V models
±0 mV pk-pk
1± mV rms
70 mV pk-p
20 mV rms
Operational insulation
Switching frequency
Input/output
Fiꢀed
265 kHz typ.
Approvals and
standards
UL/cUL1950, EN60950
TÜV Rheinland
Transient response
(See Note 2)
Typical deviation
1.8 V and 2.5 V models
3.3 V and 5 V models
150 mV
100 mV
(See Notes 5)
±00 µs recovery to
Material flammability
Weight
UL9±V-0
12 g (0.±2 oz)
150 µm
within total error band
INPUT SPECIFICATIONS
Input voltage range
Input current
Coplanarity
MTBF
±8 Vin nominal
33-75 Vdc
MIL-HDBK-217F
1,790,000 hours
No load
Remote OFF
35 mA maꢀ.
25 mA maꢀ.
Representative model: ±8S05J @ ±8 Vin, ±0 °C,
100% load ground benign
Input current (maꢀ.)
Input reflected ripple
(See Note ±)
0.55 A maꢀ. @ Io maꢀ.
and Vin = 33-75 Vdc
BELLCORE 332
>1,500,000 hours
ENVIRONMENTAL SPECIFICATIONS
(See Note 6)
5 mA (pk-pk) typ.
Thermal performance
(See Note 9)
Operating ambient
temp. (3.3 V and 5 V)
Operating ambient
temp. (1.8 V, 2.5 V
and 12 V)
-±0 °C to +65 °C
-±0 °C to +70 °C
Active high remote ON/OFF
(See Note 8)
Open collector ref to -input
Open circuit or >2 Vdc
<1.2 Vdc
Logic compatibility
ON
OFF
Undervoltage lockout
Power up
Power down
33 V (typ.)
30 V (typ.)
Non-operating
(All models)
-±0 °C to +120 °C
Start-up time
(See Note 7)
Power up
Remote ON/OFF
1.5 ms (typ.)
2.5 ms (typ.)
File Name: sꢀe15s.pdf Rev (02): 08 Dec 2005
SXE15 Series
S i n g l e o u t p u t
OUTPUT
POWER
(MAX.)
OUTPUT
OUTPUT
REGULATION
INPUT
OUTPUT
VOLTAGE
EFFICIENCY
(TYP.)
MODEL
OVP
CURRENT CURRENT
VOLTAGE
NUMBER (8,14,15)
LINE
LOAD
(MIN.)
0 A
(MAX.)
6 A
10.8 W
15 W
15 W
15 W
15 W
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
2.3 Vdc
3.2 Vdc
± Vdc
1.8 V
2.5 V
3.3 V
5 V
83%
85%
86%
87%
85%
0.3%
0.3%
0.1%
0.1%
0.1%
2.0%
1.5%
0.5%
0.5%
0.5%
SXE15-±8S1V8J
SXE15-±8S2V5J
SXE15-±8S3V3J
SXE15-±8S05J
SXE15-±8S12J
0 A
6 A
0 A
±.5 A
3 A
6 Vdc
0 A
33-75 Vdc 15 Vdc (10)
12 V
0 A
1.25 A
Notes
1.905 (±8.39)
overall length
1
2
Measured as per recommended set-up. See Application Note 116 for details.
di/dt = 0.1 A/µs, Vin = ±8 Vdc, Tc = 25 °C, load change = 0.5 lo maꢀ. to
0.75 lo maꢀ. and 0.75 lo maꢀ. to 0.5 lo maꢀ.
1.150 (29.21)
1.390 (35.31)
TOP VIEW
3
The SXE15 meets level A and level B conducted emissions only with
eꢀternal components connected before the input pins to the converter.
See Application Note 116 for details.
1.885 (±7.88)
leadframe length
4
5
Recommended input fusing is a 2 A HRC 200 V rated fuse.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Measured with eꢀternal Pi filter. See Application Note 116 for further details.
Start-up into resistive load.
Active low remote on/off is available. Standard product is active high.
Designate with the Suffiꢀ ‘-R’ e.g. SXE15-±8S05-RJ.
0.070 (1.78) MAX
0.335 (8.51) MAX
SIDE VIEW
0.010 (0.25) MIN
1.812 (±6.03)
6
7
8
Tolerence: .015
Recommended Land
(
.38)
&
Hole Pattern
1.575 (±0.01)
0.197 (5.00)
9
Operating ambient temperatures are specified at natural convection.
Higher operating temperatures are possible with increased airflow.
See Application Note 116 for further details.
0.39± (10.01)
1.812 (±6.02)
0.063 (1.60)
BOTTOM VIEW
ø0.063 (ø1.60)
0.0±7 (1.18)
1.200 (30.±8)
1.812 (±6.02)
0.125 (3.18)
ø.050 (ø1.27)
0.502 (12.75)
0.±77 (12.11)
10 SXE15-±8S12J below 0.2 A loading. OVP is TVS and 17 V typical.
11 Signal line assumed < 3 m in length.
12 A 5% minimum load is required to maintain the output voltage regulation
over all operating conditions for the SXE15-±8S12J.
13 This parameter is calculated at worst case line, load,
Non-Skid Retaining Pins,
0.161 (±.09)
2
Places
1
0.130 (3.30)
0.053 (1.36)
1.181 (30.00)
1.378 (35.00)
0.069 (1.7±)
0.100 (2.5±)
12 places
0.197 (5.00)
temperature and initial settings.
0.39± (10.01)
All Dimensions in Inches [mm]
14 The ‘J’ suffiꢀ indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
15 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
1.181 (30.00)
1.378 (35.00)
1.575 (±0.01)
PIN CONNECTIONS
PIN NUMBER FEATURE
1
2
Vout +
Vout -
N/C
PROTECTION
Short circuit
Continuous
3
Overvoltage
Latching clamp
±
Trim
TELECOM SPECIFICATION
Central office interface A
5
N/C
ETS300-132-2, input voltage
and current requirements
6
N/C
7
N/C
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.
8
On/Off
N/C
9
International Safety Standard Approvals
10
11
12
N/C
UL/cUL 1950 3rd edition. File No. E13573±
Vin -
Vin +
TÜV
TÜV Rheinland. File No. 10±01-3336-358±1. Licence No. ±000±290
Datasheet © Artesyn Technologies
® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ꢀ Application Note ꢀ Longform Data Sheet
www.artesyn.com
File Name: sꢀe15s.pdf Rev (02): 08 Dec 2005
相关型号:
SXE16VB682M18X35LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 6800uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
SXE25VB392M16X40LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 3900uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
SXE35VB331M10X20LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
SXE80VB151M10X30LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 150uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
SXE80VB2R2M4X7LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 2.2uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
SXE80VB471M16X30LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
SXE80VB8R2M6X7LL
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 8.2uF, Through Hole Mount, RADIAL LEADED
CHEMI-CON
©2020 ICPDF网 联系我们和版权申明