EM6353BZ2SP3B-3.1 [EMMICRO]
Reset Circuit with Fixed Delay; 复位电路与固定延迟型号: | EM6353BZ2SP3B-3.1 |
厂家: | EM MICROELECTRONIC - MARIN SA |
描述: | Reset Circuit with Fixed Delay |
文件: | 总7页 (文件大小:424K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EM MICROELECTRONIC - MARIN SA
EM6353
Reset Circuit with Fixed Delay
Description
Features
The EM6353 is an ultra-low current reset circuit available in a
large variety of configurations and very small packages for
maximum flexibility in all end-applications up to 125°C and
using power supplies between 1.5V and 5.5V.
This circuit monitors the supply voltage of any electronic
system, and generates the appropriate reset signal after a
fixed reset timeout period. The threshold defines the
minimum allowed voltage which guarantees the good
functionality of the system. When VDD rises above VTH, the
output remains active for an additional delay time. This
allows the system to stabilize before getting fully active.
The EM6353 features three output types: active-low push-
pull, active-low open-drain and active-high push-pull.
!
!
!
!
!
200ms reset timeout period (25ms on request)
Ultra-low supply current of 2.9µA (VDD=3.3V)
Operating temperature range: -40°C to +125°C
±1.5% reset threshold accuracy
11 reset threshold voltages VTH: 4.63V, 4.4V, 3.08V,
2.93V, 2.63V, 2.2V, 1.8V, 1.66V, 1.57V, 1.38V, 1.31V
!
3 reset output options:
"
"
"
Active-low RESET push-pull
Active-low RESET open-drain
Active-high RESET push-pull
!
!
!
!
!
No external components
Small SC70-5L and SOT23-3L packages as well as ultra-low
supply current of 2.9µA make the EM6353 an ideal choice
for portable and battery-operated devices.
Immune to short negative VDD transients
Guaranteed Reset valid down to 0.8V
Threshold hysteresis: 2.1% of VTH
Very small SOT23-3L and SC70-5L packages
Typical Application
VDD
VDD
*
VDD
Applications
RESET
RESET
!
!
!
!
!
!
!
!
!
Mobile phones
Set-top boxes
EM6353
MPU, DSP
Video, digital cameras, DVD players and recorders
Modems
GND
GND
GND
Personal computers
Switching hubs
*
REXT for open-drain version only
Pin Configuration (top view)
Copiers and fax
Utility meters
RESET
(RESET)
GND
1
1
Automotive systems
3
3
GND
VDD
RESET
(RESET)
2
VDD
2
Block Diagram
SOT23-3L
"beta" bonding
SOT23-3L
"alpha" bonding
VDD
RESET
(RESET)
NC
VDD
NC
1
2
3
5
4
3
NC
Oscillator
4
5
GND
2 VDD
+
RESET
(RESET)
RESET
RESET
1
Reset
Logic
GND
NC
Voltage
Reference
-
SC70-5L
(compatible with SC70-3 by rotating 180°)
GND
Pin Description
Pin
Function
Name
SOT23-3L
“beta”
SOT23-3L
“alpha”
SC70-5L
1
3
4
GND
Ground
Active-low RESET output. RESET remains low for the reset timeout period
after all reset conditions are deasserted and then goes high.
RESET
2
1
5
Active-high RESET output. RESET remains high for the reset timeout period
after all reset conditions are deasserted and then goes low.
RESET
3
-
2
-
2
1,3
VDD
N.C.
Supply Voltage (5.5V max.)
Not connected. Not internally connected.
1
www.emmicroelectronic.com
Copyright © 2006, EM Microelectronic-Marin SA
03/06 – rev.K
EM6353
Ordering Information
EM6353 B X 2SP3B - 2.9 +
Delay (tPOR):
RoHS Compliance:
+ = lead-free/green mold compliant
B = 200ms
A = 25ms
[blank] = leaded
Reset Threshold Voltage (VTH):
Reset Output Type:
X = Active-low /RES push-pull
Y = Active-low /RES open-drain
Z = Active-high RES push-pull
1.3 = 1.31V
1.4 = 1.38V
1.6 = 1.57V
1.7 = 1.66V
1.8 = 1.80V
2.2 = 2.20V
2.6 = 2.63V
2.9 = 2.93V
3.1 = 3.08V
4.4 = 4.40V
4.6 = 4.63V
Package & Bonding:
1SP3B = SOT23-3, "alpha", Tape&Reel 3kpcs
2SP3B = SOT23-3, "beta", Tape&Reel 3kpcs
SC5B = SC70-5, Tape&Reel 3kpcs
Note: Subject to availability (see standard versions list below). Please give complete Part Number when ordering. All
parts are offered in tape-and-reel only (3000 units).
Standard Versions (Top Marking)
Top
Top Marking
Top
Top Marking
Marking1) 2) with 4
Characters
ALBA
Marking1) 2) with 4
Characters
Part Number
Part Number
EM6353BX1SP3B-1.3
EM6353BX1SP3B-2.6
EM6353BX1SP3B-2.6+
EM6353BX1SP3B-2.9
EM6353BXSC5B-3.1
EM6353BXSC5B-4.6
EM6353BY1SP3B-2.2
EM6353BY1SP3B-2.6
EM6353BY1SP3B-2.9
C5##
BLWJ
ALWL
ALBS
ALBT
ALBG
BLBG
ALBH
BLBH
ALBK
BLBK
ALBL
EM6353BX1SP3B-2.9+ C1##
EM6353BX1SP3B-4.4
EM6353BX1SP3B-4.4+ C2##
EM6353BX1SP3B-4.6
AS##
ALBU
BLBU
ALBV
ALBW
ALBX
ALWT
BLWT
ALWU
BLWU
ALWV
BLWV
ALWW
ALWX
BLWX
ALWU
BLWU
ALWW
ALW6
BLW6
ALW7
BLW7
ALW9
BLW9
EM6353BY1SP3B-2.9+ BS##
EM6353BY1SP3B-3.1
EM6353BY1SP3B-4.4
EM6353BY1SP3B-4.6
EM6353BY2SP3B-2.6
EM6353BY2SP3B-2.6+ C9##
EM6353BY2SP3B-2.9
EM6353BY2SP3B-2.9+ C7##
EM6353BY2SP3B-3.1
EM6353BY2SP3B-3.1+
EM6353BY2SP3B-4.4
EM6353BY2SP3B-4.6
EM6353BY2SP3B-4.6+
EM6353BYSC5B-2.9
EM6353BX1SP3B-4.6+
EM6353BX2SP3B-1.3
EM6353BX2SP3B-1.8
BLBL
ALWA
ALWE
BLWE
ALWG
BLWG
ALWH
BLWH
ALWJ
BLWJ
ALWK
BLWK
ALWL
BLWL
ALWA
ALWE
ALWG
BLWG
ALWH
ALWJ
EM6353BX2SP3B-1.8+
EM6353BX2SP3B-2.6
EM6353BX2SP3B-2.6+ BW##
EM6353BX2SP3B-2.9 AR##
EM6353BX2SP3B-2.9+ BR##
EM6353BX2SP3B-3.1 PC##
AW##
EM6353BX2SP3B-3.1+ C5##
EM6353BX2SP3B-4.4
EM6353BX2SP3B-4.4+ C8##
EM6353BX2SP3B-4.6
EM6353BYSC5B-2.9+
EM6353BYSC5B-4.4
EM6353BZ2SP3B-2.9
C7##
EM6353BX2SP3B-4.6+
EM6353BXSC5B-1.3
EM6353BXSC5B-1.8
EM6353BXSC5B-2.6
EM6353BXSC5B-2.6+
EM6353BXSC5B-2.9
EM6353BXSC5B-3.1
AV##
EM6353BZ2SP3B-2.9+ BV##
EM6353BZ2SP3B-3.1
AW##
BW##
AR##
PC##
EM6353BZ2SP3B-3.1+
EM6353BZ2SP3B-4.6
EM6353BZ2SP3B-4.6+ CB##
1)
Top marking is the standard from 2006. No bottom marking exists. Where ## refers to the lot number (EM internal
reference only)
2)
Top marking with 4 characters is standard from 2003. For lead-free/green mold (RoHS) parts, the first letter of top
marking with 4 characters begins with letter “B” instead of letter “A”. Bottom marking indicates the lot number.
2
www.emmicroelectronic.com
Copyright
03/06 – rev.K
© 2006, EM Microelectronic-Marin SA
EM6353
Standard Versions (samples)
Part Number
Part Number
EM6353BX1SP3B-2.6+
EM6353BX1SP3B-2.9+
EM6353BX1SP3B-4.4+
EM6353BX1SP3B-4.6+
EM6353BX2SP3B-1.8+
EM6353BX2SP3B-2.6+
EM6353BX2SP3B-2.9+
EM6353BX2SP3B-3.1+
EM6353BX2SP3B-4.4+
EM6353BX2SP3B-4.6+
EM6353BXSC5B-2.9
EM6353BXSC5B-3.1
EM6353BY1SP3B-2.9+
EM6353BY2SP3B-2.9+
EM6353BY2SP3B-3.1+
EM6353BY2SP3B-4.6+
EM6353BYSC5B-2.9+
EM6353BZ2SP3B-2.9+
EM6353BZ2SP3B-3.1+
EM6353BZ2SP3B-4.6
Sample stock is generally held on standard versions only. Non standard versions have a 30,000 pieces minimum order
quantity. Please contact factory for other versions not shown here and for availability of non standard versions.
Absolute Maximum Ratings
Parameter
Voltage at VDD to GND
Minimum voltage at any signal pin
Maximum voltage at any signal pin
Electrostatic discharge max. to
MIL-STD-883C method 3015.7
with ref. to VSS
Handling Procedures
Symbol
VDD
VMIN
Conditions
-0.3V to +6V
GND - 0.3V
VDD + 0.3V
This device has built-in protection against high static
voltages or electric fields; however, anti-static
precautions must be taken as for any other CMOS
component. Unless otherwise specified, proper operation
can only occur when all terminal voltages are kept within
the voltage range. Unused inputs must always be tied to
a defined logic voltage level.
VMAX
VESD
2000V
Max. soldering conditions
Storage Temperature Range
TMAX
TSTG
250°C x 10s
-65°C to +150°C
Operating Conditions
Parameter
Supply voltage (note 1)
Operating Temperature
Symbol Min Max Unit
Stresses above these listed maximum ratings may cause
permanent damage to the device. Exposure beyond
specified operating conditions may affect device
reliability or cause malfunction.
VDD
TA
0.8 5.5
-40 +125 °C
V
Electrical Characteristics
Unless otherwise specified: VDD= 0.8V to 5.5V, TA=-40°C to +125°C (note 1).
Parameter
Symbol
Conditions
Min
-
-
Typ
Max
4.6
7
Unit
+25°C
VDD=1.5V
2.3
-40°C to +125°C
+25°C
-40°C to +125°C
+25°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-
-
-
-
5.5
8.3
6.3
9.6
Supply current (note 2)
IDD
VDD=3.3V
2.9
3.4
µ
A
V
DD=5.0V
Threshold voltage
(note 3)
VTH
V
1.290
1.245
1.221
1.359
1.311
1.286
1.546
1.492
1.463
1.635
1.577
1.547
1.773
1.710
1.678
2.167
2.090
2.050
2.591
2.499
1.330
1.382
1.387
1.401
1.456
1.461
1.594
1.656
1.663
1.685
1.751
1.758
1.827
1.899
1.906
2.233
2.321
2.330
2.669
2.775
EM6353 – 1.3
EM6353 – 1.4
EM6353 – 1.6
EM6353 – 1.7
EM6353 – 1.8
1.31
1.38
1.57
1.66
1.80
EM6353 – 2.2
EM6353 – 2.6
2.20
2.63
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
3
www.emmicroelectronic.com
Copyright
03/06 – rev.K
© 2006, EM Microelectronic-Marin SA
EM6353
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
-40°C to +85°C
-40°C to +125°C
+25°C
2.451
2.886
2.784
2.731
3.034
2.926
2.871
4.334
4.180
4.101
4.561
4.399
4.315
2.785
2.974
3.091
3.103
3.126
3.249
3.262
4.466
4.642
4.660
4.699
4.885
4.903
EM6353 – 2.9
EM6353 – 3.1
EM6353 – 4.4
EM6353 – 4.6
2.93
3.08
4.40
4.63
-40°C to +85°C
-40°C to +125°C
Threshold hysteresis
VHYS
TA=+25°C
-
-
V
2.1%•VTH
Note 1: Production tested at +25°C only. Over temperature limits are guaranteed by design, not production tested.
VDD min=0.9V for active-high versions (EM6353_Z).
Note 3: Threshold voltage is specified for VDD falling.
4
www.emmicroelectronic.com
Copyright
03/06 – rev.K
© 2006, EM Microelectronic-Marin SA
EM6353
Electrical Characteristics (continued)
Unless otherwise specified: VDD= 0.8V to 5.5V, TA=-40°C to +125°C (note 1).
Parameter
Symbol
Conditions
Min
155
Typ
200
25
Max
224
28
Unit
EM6353B
EM6353A
VDD from 0V to VTH (typ)+15%
(note 2 and 4). TA= +25°C
Reset timeout period
tPOR
ms
19.4
Propagation delay time
VDD drops from VTH (typ)+0.2V to VTH (typ)-0.2V
(note 2). TA= +25°C
tP
2
130
255
µs
VDD to RESET (RESET) delay
VDD>1V
VDD>2.5V
VDD>5V
VDD>1V
VDD>2.5V
VDD>5V
VDD>1V
VDD>2.5V
VDD>5V
-
-
-
-
-
-
-
-
-
-
-
-
0.3
0.3
0.3
0.3
0.3
0.35
-
I
OL=100µA
Open-drain RESET output
Voltage
VOL
V
IOL=1.5mA
IOL=3mA
-
-
I
OL=100µA
VOL
IOL=1.5mA
IOL=3mA
-
-
Push-pull RESET / RESET
Output voltage
V
0.8
2
4
-
I
OH=-30µA
VOH
IOH=-1.5mA
IOH=-3mA
-
-
Output leakage current
ILEAK
Only for EM6353_Y (open-drain)
0.5
µA
Note 1: Production tested at +25°C only. Over temperature limits are guaranteed by design, not production tested.
VDD min=0.9V for active-high versions (EM6353_Z).
Note 2: RESET (RESET) open.
Note 4: Standard version is EM6353B (tPOR =200ms), available at all times. EM6353A (tPOR =25ms) is available by mask option and upon
minimum order quantity. Please contact EM sales.
Timing Waveforms
tSEN
VDD
VTH
Overdrive
VHYS
0.8V
t
logic "1"
logic "0"
tPOR
tP
RESET
t
logic "1"
logic "0"
RESET
t
Note 6: tSEN = Maximum Transient Duration. Please refer to figure on next page.
Note 7: Overdrive = VTH- -VDD. Please refer to figure on next page.
5
www.emmicroelectronic.com
Copyright
03/06 – rev.K
© 2006, EM Microelectronic-Marin SA
EM6353
Typical Operating Characteristics
(Typical values are at TA=+25°C unless otherwise noted, RESET or RESET open.)
7
6
5
4
3
2
1
0
300
250
200
150
100
50
VDD 3 . 3 V
VDD 5 . 0 V
[ us ]
[ uA ]
VDD 1. 5 V
0
-50 -25
0
25
50
[ °C ]
75 100 125
-50 -25
0
25 50 75 100 125
[ °C ]
IDD vs. Temperature
Propagation Time tP vs. Temperature
200%
175%
150%
125%
100%
75%
400
350
300
250
tPOR (°C)
tPOR (25°C)
[ us ]
Reset occurs
above this line
200
150
100
50
50%
25%
0
0%
1
10
100
1000
-50 -25
0
25 50 75 100 125
[ °C ]
[ mV ]
Reset Timeout Period tPOR vs. Temperature
Maximum Transient Duration tSEN
vs. Overdrive VTH-VDD
(normalized with respect to tPOR 25°C
)
8%
6%
4%
2%
0%
-2%
-4%
-6%
-8%
[°C]
-50
-25
0
25
50
75
100
125
Threshold Voltage Variation vs. Temperature (normalized)
6
www.emmicroelectronic.com
Copyright
03/06 – rev.K
©
2006, EM Microelectronic-Marin SA
EM6353
Package Information
SOT23-3L
D
E
C
A1 A2 A
L
B
H
SYMBOL MIN TYP MAX
e
A
0.89 1.04 1.12
0.013 0.10
0.95 0.97 1.00
0.37 0.51
A1
A2
B
C
D
E
e
0.085 0.12 0.18
2.80 2.95 3.04
1.20 1.32 1.40
0.95
e1
H
L
1.78 1.90 2.05
2.10 2.40 2.64
0.55
e1
Dimensions are in mm
SC70-5L
D
SYMBOL
MIN
MAX
e
D
0.65 BSC
L
1.80
0.15
1.15
1.80
0.10
0.80
0.00
0.80
0.10
0.10
2.20
0.30
1.35
2.40
0.40
1.00
0.10
1.10
0.18
0.30
b
E
HE
Q1
A2
A1
A
HE
E
PIN 1
b
e
e
c
Q1
c
L
NOTE:
A2
A
#
#
#
#
All dimensions are in millimeters
Dimensions are inclusive of plating
Dimensions are exclusive of mold flash & metal burr
All specifications comply to EIAJ SC70
A1
Traceability for small packages
Due to the limited space on the package surface, the bottom marking contains a limited number of characters that provide only partial
information for lot traceability. Full information for complete traceability is however provided on the packing labels of the product at
delivery from EM. It is highly recommended that the customer insures full lot traceability of EM product in his final product.
EM Microelectronic-Marin SA (EM) makes no warranty for the use of its products, other than those expressly contained in the
Company's standard warranty which is detailed in EM's General Terms of Sale located on the Company's web site. EM assumes no
responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at
any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other
intellectual property of EM are granted in connection with the sale of EM products, expressly or by implications. EM's products are not
authorized for use as components in life support devices or systems.
Product qualification is performed according to internal EM quality standards for industrial products. For any special requirement (eg. automotive grade) please
contact EM Microelectronic-Marin S.A.
7
www.emmicroelectronic.com
Copyright
03/06 – rev.K
© 2006, EM Microelectronic-Marin SA
相关型号:
©2020 ICPDF网 联系我们和版权申明