B32355B4206J053 [EPCOS]
Film Capacitor, Polypropylene, 5% +Tol, 5% -Tol, 20uF, Chassis Mount, CAN, ROHS COMPLIANT;型号: | B32355B4206J053 |
厂家: | EPCOS |
描述: | Film Capacitor, Polypropylene, 5% +Tol, 5% -Tol, 20uF, Chassis Mount, CAN, ROHS COMPLIANT |
文件: | 总6页 (文件大小:354K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Film capacitors – AC capacitors
Motor run capacitors
400 V; class A; 85 °C / 450 V; class B; 85 °C
Series/Type:
B32355 – MotorCap™ P2 Compact
Ordering code:
Date:
Version:
July 2007
1.0
Content of inside pages of data sheet. Data will be automatically entered into headers and footers.
Please fill in the table and then change the color to “White”. This ensures that the table disappears for
the customer PDF.
Identification/Classification 1:
(header 1)
Film capacitors – AC capacitors
Identification/Classification 2:
(header 2)
Motor run capacitors
Ordering code:
Series/Type:
B32355 – MotorCap™ P2 Compact
Preliminary data (optional):
(if necessary)
Department:
Date:
FK PC PM AC
July 2007
© EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Film capacitors – AC capacitors
Motor run capacitors
B32355 – MotorCap™ P2 Compact
Construction
Dielectric: polypropylene film
Electrode: segmented metallized film
Plastic can and top material to IEC 60335-1
Dry type
Features
Self-healing properties
Low dissipation factor
P2 safety class to IEC 60252-1 2001-02
High insulation resistance
IEC/EN 60335-1 compatible
Typical applications
For general sine wave applications,
mainly as motor run capacitor
Terminals
Insulated copper wire
Mounting parts (optional)
Threaded stud at bottom of can (M8, max. torque = 5
Nm)
Fast fixation for mounting into a hole of Ø 8 mm
Technical data and specifications
Reference standards
IEC 60252-1 2001-02 / EN 60252 2001
Safety class to IEC 60252-1 2001-02
Life expectancy to IEC 60252 2001
P2
400 V/85 °C: 30,000 h (class A)
450 V/85 °C: 10,000 h (class B)
See dimensions table
±5%
Rated capacitance CR
Tolerance
Rated voltage VR
400, 450 V AC
Rated frequency fR
50/60 Hz
Maximum ratings
Maximum permissible voltage Vmax
Maximum permissible current Imax
1.1 · VR
1.3 · IR
(VR= rated voltage)
(IR= rated current)
FK PC PM AC
July 2007
Please read the important notes,
cautions and warnings.
Page 2 of 6
Film capacitors – AC capacitors
Motor run capacitors
B32355 – MotorCap™ P2 Compact
Test data
AC test voltage terminal to terminal VTT
2 · VR, 2 s (routine test)
2 · VR, 60 s (type test)
3,000 s
Insulation resistance Rins or time constant τ
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
Dissipation factor tan δ at 20 °C
Maximum rate of voltage rise dV/dtmax
Climatic data
≤ 1.0 · 10-3 (120 Hz)
10 V/μs
Climatic category
25/085/21 to IEC 60068-1
Lower category Tmin
–25 °C
+85 °C
21 days
Upper category Tmax
Damp heat test ttest
Mechanical and thermal properties
Ball pressure test to IEC 60309-1 sec. 27.3
Plastic can and top disk material
UL 94 V2 compatible
20 N at 125°C
Compliant to EN 60252
Glow wire test to IEC 60695-2-1/0 and -2-1/1
Test temperature 550 °C for IR ≤ 0.5 A
Test temperature 750 °C for IR > 0.5 A
Self-extinguish within 2 seconds of
withdrawing glow wire without igniting
wrapping tissue to GWIT.
Part is compatible to EN 60335-1
Tracking Test to IEC 60112 solution A
Compatibility to RoHS
> 250 V
Compliance to directive 2002/95/EC
Approvals
VDE – 400 V/85 °C: 30,000 h (class A)
VDE – 450 V/85 °C: 10,000 h (class B)
Approved
Approved
FK PC PM AC
July 2007
Please read the important notes,
cautions and warnings.
Page 3 of 6
Film capacitors – AC capacitors
Motor run capacitors
B32355 – MotorCap™ P2 Compact
Dimensional drawing
Mounting options
* = 1: can without mounting
* = 3: can with M8 bolt
* = 5: fast fix mounting
10
10
M8-sized
fast
fixation
Stud M8x1.25
Star Washer 8mm
Nut M8x1.25
10
Ø8.2+0.2/-0
Ø2.2+0.1/-0
FK PC PM AC
July 2007
Please read the important notes,
cautions and warnings.
Page 4 of 6
Film capacitors – AC capacitors
Motor run capacitors
B32355 – MotorCap™ P2 Compact
Ordering codes and packing units
VR
CR
Max. dimensions
d × l
Ordering code
Packing units
V AC
µF
2.0
mm
pcs.
112
112
112
112
112
96
400 / 450
30 × 62
30 × 62
30 × 62
30 × 62
30 × 62
32 × 62
35 × 62
35 × 62
35 × 62
40 × 62
35 × 71
35 × 71
35 × 71
40 × 72
40 × 72
40 × 72
50 × 96
B32355A4205J0*#
B32355A4255J0*#
B32355A4305J0*#
B32355A4405J0*#
B32355A4505J0*#
B32355A4505J1*#
B32355A4605J0*#
B32355A4705J0*#
B32355A4755J0*#
B32355A4755J1*#
B32355A4805J0*#
B32355A4905J0*#
B32355A4106J0*#
B32355A4116J0*#
B32355A4126J0*#
B32355A4136J0*#
B32355A4206J0*#
2.5
3.0
4.0
5.0
5.0
6.0
84
7.0
84
7.5
84
7.5
60
8.0
84
9.0
84
10.0
11.0
12.0
13.0
20.0
84
60
60
60
32
Composition of ordering code:
*: construction
1
3
5
plastic can
plastic can with M8 bolt
plastic can with fast fixation device available for diameters 30 mm, 32 mm and 35 mm,
others on request
#: wire length (dimension ‘b’ in drawing)
3
7
9
100 mm
200 mm
250 mm
U
Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power
Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to
prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are
kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM AC
July 2007
Please read the important notes,
cautions and warnings.
Page 5 of 6
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap,
PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
FK PC PM AC
July 2007
Page 6 of 6
相关型号:
B32355B4206J057
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 20uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4255J017
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2.5uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4255J019
Film Capacitor, Polypropylene, 5% +Tol, 5% -Tol, 2.5uF, Chassis Mount, CAN, ROHS COMPLIANT
EPCOS
B32355B4255J037
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2.5uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4255J057
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2.5uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4305J013
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 3uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4305J017
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 3uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4305J019
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 3uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4305J037
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 3uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4305J059
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 3uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4405J013
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 4uF, CHASSIS MOUNT, CAN, ROHS COMPLIANT
EPCOS
B32355B4405J017
Film Capacitor, Polypropylene, 5% +Tol, 5% -Tol, 4uF, Chassis Mount, CAN, ROHS COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明