B32520C6153K189 [EPCOS]
CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.015uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE;型号: | B32520C6153K189 |
厂家: | EPCOS |
描述: | CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.015uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE PC 电容器 |
文件: | 总44页 (文件大小:993K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polyester Film Capacitors (MKT)
Series/Type:
B32520 ... B32529
Date:
June 2018
© EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polyester film capacitors (MKT)
General purpose (stacked/wound)
B32520 ... B32529
Typical applications
Blocking
Dimensional drawing
Coupling, decoupling
Bypassing
RFI for automotive
Climatic
Max. operating temperature: 125 °C
Climatic category (IEC 60068-1:2013):
55/125/56
Construction
Dimensions in mm
Dielectric: polyethylene terephthalate
(polyester, PET)
Stacked-film technology for lead spacing
5 to 15 mm (= code C, D or E in digit 7 of
ordering code)
Wound capacitor technology for lead
spacing 10 to 37.5 mm (= code N, Q or R in
digit 7 of ordering code)
Lead spacing Lead diameter Type
0.4
d1 0.05
0.5
5.0
7.5
B32529
B32520
B32521
B32522
B32523
B32524
B32526
0.5
10.0
15.0
22.5
27.5
37.5
0.61)
0.8
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
0.8
0.8
1.0
Features
1) 0.5 mm for capacitor width w = 4 mm
High pulse strength
High contact reliability
RoHS-compatible
Halogen-free capacitors available on request
AEC-Q200D compliant
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Manufacturer's logo,
rated capacitance (coded),
cap. tolerance (code letter), rated DC voltage,
date of manufacture (coded),
coded type ("1") for lead spacing 5 mm,
series and lot number for lead spacing ≥10 mm
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping, refer to chapter
"Taping and packing".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 44
B32520 ... B32529
General purpose (stacked/wound)
Overview of available types
Lead spacing 5.0 mm
7.5 mm
B32520
9
10.0 mm
B32521
10
Type
B32529
6
Page
Technology
VR (V DC)
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
50 63 100 250 400 630 63 100 250 400 63 100 250 400 630
VRMS (V AC) 32 40 63 160 200 400 40 63 160 200 40 63 160 200 200
CR (μF)
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
Technology: s = Stacked-film technology / w = Wound capacitor technology
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 44
B32520 ... B32529
General purpose (stacked/wound)
Overview of available types
Lead spacing 15.0 mm
22.5 mm
B32523
14
27.5 mm
B32524
15
Type
B32522
12
Page
Technology
VR (V DC)
s
s/w s/w s
w
s
w
w
w
w
w
w
w
w
w
w
63 100 250 400 450 630 63 100 250 400 630 63 100 250 400 630
VRMS (V AC) 40 63 160 200 200 200 40 63 160 200 200 40 63 160 200 220
CR (μF)
0.047
0.068
0.10
0.15
0.22
0.33
0.39
0.47
0.56
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Technology: s = Stacked-film technology / w = Wound capacitor technology
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 44
B32520 ... B32529
General purpose (stacked/wound)
Overview of available types
Lead spacing 37.5 mm
Type
B32526
Page
17
w
Technology
VR (V DC)
w
w
w
63
100
63
250
160
400
200
VRMS (V AC) 40
CR (μF)
3.3
4.7
5.6
6.8
8.2
10
15
22
33
47
56
68
82
100
150
220
Technology: s = Stacked-film technology / w = Wound capacitor technology
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 44
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
Reel
Untaped
w × h × l
(composition see
below)
V DC V AC
μF
mm
pcs./MOQ pcs./MOQ pcs./MOQ
50
32
3.3
4.7
7.8 × 13.0 × 7.8 B32529D5335+***
7.8 × 13.0 × 7.8 B32529D5475M*** 4000
4000
3200
3200
4000
4000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
6000
4000
4000
8000
8000
8000
8000
8000
8000
8000
8000
63
40
0.0010 2.5 × 6.5 × 7.3 B32529C0102+*** 12800
0.0015 2.5 × 6.5 × 7.3 B32529C0152+*** 12800
0.0022 2.5 × 6.5 × 7.3 B32529C0222+*** 12800
0.0033 2.5 × 6.5 × 7.3 B32529C0332+*** 12800
0.0047 2.5 × 6.5 × 7.3 B32529C0472+*** 12800
0.0068 2.5 × 6.5 × 7.3 B32529C0682+*** 12800
0.010 2.5 × 6.5 × 7.3 B32529C0103+*** 12800
0.015 2.5 × 6.5 × 7.3 B32529C0153+*** 12800
0.022 2.5 × 6.5 × 7.3 B32529C0223+*** 12800
0.033 2.5 × 6.5 × 7.3 B32529C0333+*** 12800
0.047 2.5 × 6.5 × 7.3 B32529C0473+*** 12800
0.068 2.5 × 6.5 × 7.3 B32529C0683+*** 12800
0.10
0.15
0.22
0.33
0.47
0.68
1.0
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
11200
9600
2.5 × 6.5 × 7.3 B32529C0104+*** 12800
2.5 × 6.5 × 7.3 B32529C0154+*** 12800
2.5 × 6.5 × 7.3 B32529C0224+*** 12800
3.0 × 6.5 × 7.3 B32529C0334+*** 10800
3.5 × 8.0 × 7.3 B32529C0474+***
4.5 × 9.5 × 7.3 B32529C0684+***
4.5 × 9.5 × 7.3 B32529C0105+***
6.0 × 10.5 × 7.5 B32529C0155+***
7.8 × 13.0 × 7.8 B32529D0225+***
9200
7200
7200
5200
4000
8000
6000
6000
4400
1.5
2.2
3200
100
63
0.0010 2.5 × 6.5 × 7.3 B32529C1102+*** 12800
0.0015 2.5 × 6.5 × 7.3 B32529C1152+*** 12800
0.0022 2.5 × 6.5 × 7.3 B32529C1222+*** 12800
0.0033 2.5 × 6.5 × 7.3 B32529C1332+*** 12800
0.0047 2.5 × 6.5 × 7.3 B32529C1472+*** 12800
0.0068 2.5 × 6.5 × 7.3 B32529C1682+*** 12800
0.010 2.5 × 6.5 × 7.3 B32529C1103+*** 12800
0.015 2.5 × 6.5 × 7.3 B32529C1153+*** 12800
11200
11200
11200
11200
11200
11200
11200
11200
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 44
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
Reel
Untaped
w × h × l
(composition see
below)
V DC V AC
μF
mm
pcs./MOQ pcs./MOQ pcs./MOQ
100 63
0.022 2.5 × 6.5 × 7.3 B32529C1223+*** 12800
0.033 2.5 × 6.5 × 7.3 B32529C1333+*** 12800
0.047 2.5 × 6.5 × 7.3 B32529C1473+*** 12800
0.068 2.5 × 6.5 × 7.3 B32529C1683+*** 12800
11200
11200
11200
11200
11200
9600
8000
8000
6000
4400
8000
8000
8000
8000
8000
8000
8000
8000
6000
4000
4000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
6000
6000
4000
4000
4000
0.10
0.15
0.22
0.33
0.47
0.68
1.0
2.5 × 6.5 × 7.3 B32529C1104+*** 12800
3.0 × 6.5 × 7.3 B32529C1154+*** 10800
3.5 × 8.0 × 7.3 B32529C1224+***
3.5 × 8.0 × 7.3 B32529C1334+***
4.5 × 9.5 × 7.3 B32529C1474+***
6.0 × 10.5 × 7.5 B32529C1684+***
7.8 × 13.0 × 7.8 B32529D1105+***
9200
9200
7200
5200
4000
3200
250 160
0.0010 2.5 × 6.5 × 7.3 B32529C3102+*** 12800
0.0015 2.5 × 6.5 × 7.3 B32529C3152+*** 12800
0.0022 2.5 × 6.5 × 7.3 B32529C3222+*** 12800
0.0033 2.5 × 6.5 × 7.3 B32529C3332+*** 12800
0.0047 2.5 × 6.5 × 7.3 B32529C3472+*** 12800
0.0068 2.5 × 6.5 × 7.3 B32529C3682+*** 12800
0.010 2.5 × 6.5 × 7.3 B32529C3103+*** 12800
0.015 2.5 × 6.5 × 7.3 B32529C3153+*** 12800
0.022 2.5 × 6.5 × 7.3 B32529C3223+*** 12800
0.033 3.0 × 6.5 × 7.3 B32529C3333+*** 10800
11200
11200
11200
11200
11200
11200
11200
11200
11200
9600
8000
6000
6000
5600
3200
3200
3200
0.047 3.5 × 8.0 × 7.3 B32529C3473+***
0.068 4.5 × 9.5 × 7.3 B32529C3683+***
9200
7200
7200
6400
4000
4000
4000
0.10
0.15
0.22
0.33
0.47
4.5 × 9.5 × 7.3 B32529C3104+***
5.0 × 10.0 × 7.5 B32529C3154+***
7.8 × 13.0 × 7.8 B32529D3224+***
7.8 × 13.0 × 7.8 B32529C3334+***
7.8 × 13.0 × 7.8 B32529C3474+***
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 44
B32529
General purpose (stacked)
Ordering codes and packing units (lead spacing 5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
Reel
Untaped
w × h × l
(composition see
below)
V DC V AC
μF
mm
pcs./MOQ pcs./MOQ pcs./MOQ
400 200
0.0010 2.5 × 6.5 × 7.3 B32529C6102+*** 12800
0.0015 2.5 × 6.5 × 7.3 B32529C6152+*** 12800
0.0022 2.5 × 6.5 × 7.3 B32529C6222+*** 12800
0.0033 2.5 × 6.5 × 7.3 B32529C6332+*** 12800
0.0047 2.5 × 6.5 × 7.3 B32529C6472+*** 12800
0.0068 2.5 × 6.5 × 7.3 B32529C6682+*** 12800
0.010 3.0 × 6.5 × 7.3 B32529E6103+*** 10800
0.015 3.0 × 6.5 × 7.3 B32529E6153+*** 10800
11200
11200
11200
11200
11200
11200
9600
9600
8000
6000
6000
4400
3200
3200
11200
11200
11200
8000
8000
8000
5600
5600
4400
3200
8000
8000
8000
8000
8000
8000
8000
8000
8000
6000
6000
4000
4000
4000
8000
8000
8000
8000
8000
8000
6000
6000
4000
4000
0.022 3.5 × 8.0 × 7.3 B32529E6223+***
0.033 4.5 × 9.5 × 7.3 B32529E6333+***
0.047 4.5 × 9.5 × 7.3 B32529E6473+***
0.068 6.0 × 10.5 × 7.5 B32529E6683+***
9200
7200
7200
5200
4000
4000
0.10
7.8 × 13.0 × 7.8 B32529E6104+***
7.8 × 13.0 × 7.8 B32529E6154+***
0.15
630 400
0.0010 2.5 × 6.5 × 7.3 B32529C8102+*** 12800
0.0015 2.5 × 6.5 × 7.3 B32529C8152+*** 12800
0.0022 2.5 × 6.5 × 7.3 B32529C8222+*** 12800
0.0033 3.5 × 8.0 × 7.3 B32529C8332+***
0.0047 3.5 × 8.0 × 7.3 B32529C8472+***
0.0068 3.5 × 8.0 × 7.3 B32529C8682+***
0.010 5.0 × 10.0 × 7.5 B32529C8103+***
0.015 5.0 × 10.0 × 7.5 B32529C8153+***
0.022 7.8 × 13.0 × 7.8 B32529C8223+***
0.033 7.8 × 13.0 × 7.8 B32529C8333+***
9200
9200
9200
6400
6400
5200
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 44
B32520
General purpose (stacked)
Ordering codes and packing units (lead spacing 7.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
Reel
Untaped
w × h × l
(composition see
below)
V DC V AC
μF
mm
pcs./MOQ pcs./MOQ pcs./MOQ
63
40
0.47 3.0 × 8.0 × 10.0 B32520C0474+*** 10400
9600
7200
5600
5600
4400
9600
9600
7200
5600
4400
4400
9600
7200
5600
4400
9600
9600
7200
7200
5600
5600
4400
8000
6000
4000
4000
3000
8000
8000
6000
4000
3000
3000
8000
6000
4000
3000
8000
8000
6000
6000
4000
4000
3000
0.68 4.0 × 8.5 × 10.0 B32520C0684+***
8000
6400
6400
5200
1.0
1.5
2.2
5.0 × 10.5 × 10.0 B32520C0105+***
5.0 × 10.5 × 10.0 B32520C0155+***
6.0 × 12.0 × 10.3 B32520C0225+***
100
63
0.15 3.0 × 8.0 × 10.0 B32520C1154+*** 10400
0.22 3.0 × 8.0 × 10.0 B32520C1224+*** 10400
0.33 4.0 × 8.5 × 10.0 B32520C1334+***
0.47 5.0 × 10.5 × 10.0 B32520C1474+***
0.68 6.0 × 12.0 × 10.3 B32520C1684+***
8000
6400
5200
5200
1.0
6.0 × 12.0 × 10.3 B32520C1105+***
250 160
400 200
0.068 3.0 × 8.0 × 10.0 B32520C3683+*** 10400
0.10 4.0 × 8.5 × 10.0 B32520C3104+***
0.15 5.0 × 10.5 × 10.0 B32520C3154+***
0.22 6.0 × 12.0 × 10.3 B32520C3224+***
8000
6400
5200
0.015 3.0 × 8.0 × 10.0 B32520E6153+*** 10400
0.022 3.0 × 8.0 × 10.0 B32520E6223+*** 10400
0.033 4.0 × 8.5 × 10.0 B32520E6333+***
0.047 4.0 × 8.5 × 10.0 B32520E6473+***
0.068 5.0 × 10.5 × 10.0 B32520E6683+***
0.10 5.0 × 10.5 × 10.0 B32520E6104+***
0.15 6.0 × 12.0 × 10.3 B32520E6154+***
8000
8000
6400
6400
5200
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 44
B32521
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
Reel
Untaped
w × h × l
(composition see
below)
V DC V AC
μF
mm
pcs./MOQ pcs./MOQ pcs./MOQ
63
40
0.47 4.0 × 7.0 × 13.0 B32521C0474+*** 4000
0.68 4.0 × 7.0 × 13.0 B32521C0684+*** 4000
6800
6800
6800
5200
5200
4400
6800
6800
6800
6800
6800
6800
6800
5200
4400
6800
6800
6800
6800
6800
6800
6800
6800
6800
6800
6800
5200
5200
5200
4400
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
1.0
1.5
2.2
3.3
4.0 × 9.0 × 13.0 B32521C0105+*** 4000
5.0 × 11.0 × 13.0 B32521C0155+*** 3320
5.0 × 11.0 × 13.0 B32521C0225+*** 3320
6.0 × 12.0 × 13.0 B32521C0335+*** 2720
100
63
0.047 4.0 × 7.0 × 13.0 B32521C1473+*** 4000
0.068 4.0 × 7.0 × 13.0 B32521C1683+*** 4000
0.10 4.0 × 7.0 × 13.0 B32521C1104+*** 4000
0.15 4.0 × 7.0 × 13.0 B32521C1154+*** 4000
0.22 4.0 × 7.0 × 13.0 B32521C1224+*** 4000
0.33 4.0 × 7.0 × 13.0 B32521C1334+*** 4000
0.47 4.0 × 9.0 × 13.0 B32521C1474+*** 4000
0.68 5.0 × 11.0 × 13.0 B32521C1684+*** 3320
1.0
6.0 × 12.0 × 13.0 B32521C1105+*** 2720
250 160
0.010 4.0 × 7.0 × 13.0 B32521C3103+*** 4000
0.015 4.0 × 7.0 × 13.0 B32521C3153+*** 4000
0.022 4.0 × 7.0 × 13.0 B32521C3223+*** 4000
0.033 4.0 × 7.0 × 13.0 B32521C3333+*** 4000
0.047 4.0 × 7.0 × 13.0 B32521C3473+*** 4000
0.056 4.0 × 7.0 × 13.0 B32521C3563+*** 4000
0.068 4.0 × 7.0 × 13.0 B32521C3683+*** 4000
0.082 4.0 × 7.0 × 13.0 B32521C3823+*** 4000
0.10 4.0 × 7.0 × 13.0 B32521C3104+*** 4000
0.12 4.0 × 9.0 × 13.0 B32521C3124+*** 4000
0.15 4.0 × 9.0 × 13.0 B32521C3154+*** 4000
0.18 5.0 × 11.0 × 13.0 B32521C3184+*** 3320
0.22 5.0 × 11.0 × 13.0 B32521C3224+*** 3320
0.33 5.0 × 11.0 × 13.0 B32521C3334+*** 3320
0.47 6.0 × 12.0 × 13.0 B32521C3474+*** 2720
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 44
B32521
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
Reel
Untaped
w × h × l
(composition see
below)
V DC V AC
μF
mm
pcs./MOQ pcs./MOQ pcs./MOQ
400 200
0.010 4.0 × 7.0 × 13.0 B32521E6103+*** 4000
0.015 4.0 × 7.0 × 13.0 B32521E6153+*** 4000
0.022 4.0 × 7.0 × 13.0 B32521E6223+*** 4000
0.033 4.0 × 7.0 × 13.0 B32521E6333+*** 4000
0.047 4.0 × 9.0 × 13.0 B32521E6473+*** 4000
0.068 4.0 × 9.0 × 13.0 B32521E6683+*** 4000
0.10 5.0 × 11.0 × 13.0 B32521E6104+*** 3320
0.15 6.0 × 12.0 × 13.0 B32521E6154+*** 2720
6800
6800
6800
6800
6800
6800
5200
4400
6800
6800
5200
5200
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
630 200
0.010 4.0 × 9.0 × 13.0 B32521D8103+***
0.015 5.0 × 11.0 × 13.0 B32521D8153+***
0.022 5.0 × 11.0 × 13.0 B32521D8223+***
0.033 6.0 × 12.0 × 13.0 B32521D8333+***
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 44
B32522
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ MOQ
Reel Untaped
pcs./ pcs./
w × h × l
(composition see
below)
V DC V AC
μF
mm
63
40
0.68
5.0 × 10.5 × 18.0 B32522C0684+***
5.0 × 10.5 × 18.0 B32522C0105+***
5.0 × 10.5 × 18.0 B32522C0155+***
5.0 × 10.5 × 18.0 B32522C0225+***
6.0 × 11.0 × 18.0 B32522C0335+***
7.0 × 12.5 × 18.0 B32522C0475+***
8.5 × 14.5 × 18.0 B32522C0685+***
9.0 × 17.5 × 18.0 B32522C0106+***
5.0 × 10.5 × 18.0 B32522C1334+***
5.0 × 10.5 × 18.0 B32522C1474+***
5.0 × 10.5 × 18.0 B32522C1684+***
5.0 × 10.5 × 18.0 B32522C1105+***
6.0 × 11.0 × 18.0 B32522Q1105+***
6.0 × 11.0 × 18.0 B32522C1155+***
7.0 × 12.5 × 18.0 B32522Q1155+***
7.0 × 12.5 × 18.0 B32522C1225+***
8.5 × 14.5 × 18.0 B32522Q1225+***
8.5 × 14.5 × 18.0 B32522C1335+***
9.0 × 17.5 × 18.0 B32522Q1335+***
9.0 × 17.5 × 18.0 B32522C1475+***
4680
4680
4680
4680
3840
3320
2720
2560
4680
4680
4680
4680
3840
3840
3320
3320
2720
2720
2560
2560
ꢀ
5200 4000
5200 4000
5200 4000
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
5200 4000
5200 4000
5200 4000
5200 4000
4400 4000
4400 4000
3600 4000
3600 4000
2800 2000
2800 2000
2800 2000
2800 2000
2200 1200
1.0
1.5
2.2
3.3
4.7
6.8
10
100
63
0.33
0.47
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
∇
∇
∇
∇
3.3
4.7
4.7 ∇ 11.0 × 18.5 × 18.0 B32522Q1475+***
6.8
11.0 × 18.5 × 18.0 B32522C1685+***
5.0 × 10.5 × 18.0 B32522C3104+***
5.0 × 10.5 × 18.0 B32522C3154+***
5.0 × 10.5 × 18.0 B32522C3224+***
5.0 × 10.5 × 18.0 B32522C3334+***
5.0 × 10.5 × 18.0 B32522C3394+***
6.0 × 11.0 × 18.0 B32522C3474+***
7.0 × 12.5 × 18.0 B32522C3564+***
ꢀ
ꢀ
1200
250 160
0.10
0.15
0.22
0.33
0.39
0.47
0.56
4680
4680
4680
4680
4680
3840
3320
5200 4000
5200 4000
5200 4000
5200 4000
5200 4000
4400 4000
3600 4000
∇ Wound capacitor technology
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 44
B32522
General purpose (stacked/wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ MOQ
Reel Untaped
pcs./ pcs./
w × h × l
(composition see
below)
V DC V AC
μF
mm
250 160
0.68
1.0
1.0
1.5
1.5
2.2
0.047
0.068
0.10
0.15
0.22
0.33
0.39
0.47
0.56
0.68
1.0
7.0 × 12.5 × 18.0 B32522C3684+***
8.5 × 14.5 × 18.0 B32522C3105+***
8.5 × 14.5 × 18.0 B32522N3105+***
9.0 × 17.5 × 18.0 B32522C3155+***
9.0 × 17.5 × 18.0 B32522N3155+***
11.0 × 18.5 × 18.0 B32522C3225+***
5.0 × 10.5 × 18.0 B32522E6473+***
5.0 × 10.5 × 18.0 B32522E6683+***
5.0 × 10.5 × 18.0 B32522E6104+***
5.0 × 10.5 × 18.0 B32522E6154+***
6.0 × 11.0 × 18.0 B32522E6224+***
7.0 × 12.5 × 18.0 B32522E6334+***
9.0 × 17.5 × 18.0 B32522E6394+***
9.0 × 17.5 × 18.0 B32522E6474+***
9.0 × 17.5 × 18.0 B32522E6564+***
9.0 × 17.5 × 18.0 B32522E6684+***
11.0 × 18.5 × 18.0 B32522E6105+***
3320
2720
2720
2560
2560
ꢀ
3600 4000
2800 2000
2800 2000
2800 2000
2800 2000
∇
∇
ꢀ
1200
400 200
4680
4680
4680
4680
3840
3320
2560
2560
2560
2560
ꢀ
5200 4000
5200 4000
5200 4000
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
2800 2000
2800 2000
ꢀ
1200
450 200
0.10 ∇ 5.0 × 10.5 × 18.0 B32522N6104+***
0.15 ∇ 5.0 × 10.5 × 18.0 B32522N6154+***
0.22 ∇ 6.0 × 11.0 × 18.0 B32522N6224+***
0.33 ∇ 7.0 × 12.5 × 18.0 B32522N6334+***
0.47 ∇ 8.5 × 14.5 × 18.0 B32522N6474+***
0.68 ∇ 9.0 × 17.5 × 18.0 B32522N6684+***
1.0 ∇ 11.0 × 18.5 × 18.0 B32522N6105+***
4680
4680
3840
3320
2720
2560
ꢀ
5200 4000
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
2200 1200
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
630 200
0.047
0.068
0.10
5.0 × 10.5 × 18.0 B32522D8473+***
6.0 × 11.0 × 18.0 B32522D8683+***
7.0 × 12.5 × 18.0 B32522D8104+***
8.5 × 14.5 × 18.0 B32522D8154+***
9.0 × 17.5 × 18.0 B32522D8224+***
ꢀ
ꢀ
ꢀ
0.15
0.22
ꢀ
ꢀ
∇ Wound capacitor technology
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 44
B32523
General purpose (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
μF
63
40
3.3
4.7
6.8
10
15
22
6.0 × 15.0 × 26.5 B32523R0335+*** 2720
6.0 × 15.0 × 26.5 B32523R0475+*** 2720
6.0 × 15.0 × 26.5 B32523R0685+*** 2720
7.0 × 16.0 × 26.5 B32523R0106+*** 2320
10.5 × 16.5 × 26.5 B32523R0156+*** 1560
12.0 × 22.0 × 26.5 B32523R0226+*** ꢀ
6.0 × 15.0 × 26.5 B32523Q1155+*** 2720
6.0 × 15.0 × 26.5 B32523Q1225+*** 2720
6.0 × 15.0 × 26.5 B32523Q1335+*** 2720
7.0 × 16.0 × 26.5 B32523Q1475+*** 2320
8.5 × 16.5 × 26.5 B32523Q1685+*** 1960
10.5 × 18.5 × 26.5 B32523Q1106+*** 1560
12.0 × 22.0 × 26.5 B32523Q1156+*** ꢀ
2800
2800
2800
2400
1600
ꢀ
2880
2880
2880
2520
2160
1800
2880
2880
2880
2520
2040
2160
1800
2880
2880
2880
2520
2160
2040
2880
2880
2520
2040
2160
2040
2880
2880
2520
2160
2160
1800
100
63
1.5
2800
2800
2800
2400
2000
1600
ꢀ
2.2
3.3
4.7
6.8
10
15
250 160
400 200
630 200
0.47 6.0 × 15.0 × 26.5 B32523Q3474+*** 2720
0.68 6.0 × 15.0 × 26.5 B32523Q3684+*** 2720
1.0
2800
2800
2800
2400
1600
1400
2800
2800
2400
2000
1600
1400
2800
2800
2400
1600
1600
ꢀ
6.0 × 15.0 × 26.5 B32523Q3105+*** 2720
7.0 × 16.0 × 26.5 B32523Q3155+*** 2320
1.5
2.2 10.5 × 16.5 × 26.5 B32523Q3225+*** 1560
3.3 11.0 × 20.5 × 26.5 B32523Q3335+*** 1480
0.22 6.0 × 15.0 × 26.5 B32523Q6224+*** 2720
0.33 6.0 × 15.0 × 26.5 B32523Q6334+*** 2720
0.47 7.0 × 16.0 × 26.5 B32523Q6474+*** 2320
0.68 8.5 × 16.5 × 26.5 B32523Q6684+*** 1920
1.0 10.5 × 16.5 × 26.5 B32523Q6105+*** 1560
1.5 11.0 × 20.5 × 26.5 B32523Q6155+*** 1480
0.10 6.0 × 15.0 × 26.5 B32523Q8104+*** 2720
0.15 6.0 × 15.0 × 26.5 B32523Q8154+*** 2720
0.22 7.0 × 16.0 × 26.5 B32523Q8224+*** 2320
0.33 10.5 × 16.5 × 26.5 B32523Q8334+*** 1560
0.47 10.5 × 20.5 × 26.5 B32523Q8474+*** 1560
0.68 12.0 × 22.0 × 26.5 B32523Q8684+*** ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 44
B32524
General purpose (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
μF
63
40
4.7 11.0 × 21.0 × 31.5 B32524R0475+*** ꢀ
6.8 11.0 × 21.0 × 31.5 B32524Q0685+*** ꢀ
1400
1400
1400
1400
1400
1200
ꢀ
1280
1280
1280
1280
1280
1120
800
10
11.0 × 21.0 × 31.5 B32524R0106+*** ꢀ
11.0 × 21.0 × 31.5 B32524R0156+*** ꢀ
11.0 × 21.0 × 31.5 B32524R0226+*** ꢀ
12.5 × 21.5 × 31.5 B32524R0336+*** ꢀ
18.0 × 27.5 × 31.5 B32524R0476+*** ꢀ
18.0 × 27.5 × 31.5 B32524R0686+*** ꢀ
22.0 × 36.5 × 31.5 B32524R0107+*** ꢀ
15
22
33
47
68
ꢀ
800
640
100
ꢀ
100
63
4.7 11.0 × 21.0 × 31.5 B32524Q1475+*** ꢀ
6.8 11.0 × 21.0 × 31.5 B32524Q1685+*** ꢀ
1400
1400
1400
1400
1000
ꢀ
1280
1280
1280
1280
1040
800
10
11.0 × 21.0 × 31.5 B32524Q1106+*** ꢀ
11.0 × 21.0 × 31.5 B32524Q1156+*** ꢀ
14.0 × 24.5 × 31.5 B32524Q1226+*** ꢀ
18.0 × 27.5 × 31.5 B32524Q1336+*** ꢀ
21.0 × 31.0 × 31.5 B32524Q1476+*** ꢀ
22.0 × 36.5 × 31.5 B32524Q1686+*** ꢀ
15
22
33
47
68
ꢀ
720
640
ꢀ
250 160
1.5 11.0 × 21.0 × 31.5 B32524Q3155+*** ꢀ
2.2 11.0 × 21.0 × 31.5 B32524Q3225+*** ꢀ
3.3 11.0 × 21.0 × 31.5 B32524Q3335+*** ꢀ
4.7 11.0 × 21.0 × 31.5 B32524Q3475+*** ꢀ
6.8 11.0 × 21.0 × 31.5 B32524R3685+*** ꢀ
1400
1400
1400
1400
1400
1200
ꢀ
1280
1280
1280
1280
1280
1120
960
960
960
720
640
10
12.5 × 21.5 × 31.5 B32524R3106+*** ꢀ
15.0 × 24.5 × 31.5 B32524R3156M*** ꢀ
15
15
15
22
33
18.0 × 27.5 × 31.5 B32524R3156J***
ꢀ
ꢀ
18.0 × 27.5 × 31.5 B32524R3156K*** ꢀ
19.0 × 30.0 × 31.5 B32524R3226+*** ꢀ
22.0 × 36.5 × 31.5 B32524R3336+*** ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 44
B32524
General purpose (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
μF
400 200
0.68 11.0 × 19.0 × 31.5 B32524Q6684+*** ꢀ
1.0 11.0 × 19.0 × 31.5 B32524Q6105+*** ꢀ
1.5 11.0 × 19.0 × 31.5 B32524Q6155+*** ꢀ
2.2 11.0 × 21.0 × 31.5 B32524R6225+*** ꢀ
3.3 14.0 × 24.5 × 31.5 B32524R6335+*** ꢀ
4.7 14.0 × 24.5 × 31.5 B32524R6475+*** ꢀ
6.8 18.0 × 27.5 × 31.5 B32524R6685+*** ꢀ
1400
1400
1400
1400
1000
1000
ꢀ
1280
1280
1280
1280
1040
1040
800
10
22.0 × 36.5 × 31.5 B32524R6106+*** ꢀ
0.33 11.0 × 21.0 × 31.5 B32524Q8334+*** ꢀ
0.47 11.0 × 21.0 × 31.5 B32524Q8474+*** ꢀ
0.68 11.0 × 21.0 × 31.5 B32524Q8684+*** ꢀ
1.0 14.0 × 24.5 × 31.5 B32524Q8105+*** ꢀ
1.5 18.0 × 27.5 × 31.5 B32524Q8155+*** ꢀ
2.2 21.0 × 31.0 × 31.5 B32524Q8225+*** ꢀ
ꢀ
640
630 220
1400
1400
1400
1000
ꢀ
1280
1280
1280
1040
800
ꢀ
720
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
M = 20%
K = 10%
J = 5%
289 = Ammo pack
189 = Reel
000 = Untaped (standard lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 44
B32526
General purpose (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
μF
63
40
22
33
47
56
68
12.0 × 22.0 × 41.5 B32526R0226+*** ꢀ
12.0 × 22.0 × 41.5 B32526R0336+*** ꢀ
12.0 × 22.0 × 41.5 B32526R0476+*** ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1620
1620
1620
1040
800
780
720
640
440
1620
1620
1380
1040
800
780
720
640
440
1620
1620
1620
1380
1040
800
780
640
640
440
24.0 × 15.0 × 41.5 B32526T0566+***
16.0 × 28.5 × 41.5 B32526R0686+*** ꢀ
24.0 × 19.0 × 41.5 B32526T0826+***
ꢀ
82
ꢀ
100
150
220
15
22
33
33
47
47
68
18.0 × 32.5 × 41.5 B32526R0107+*** ꢀ
20.0 × 39.5 × 41.5 B32526R0157+*** ꢀ
28.0 × 42.5 × 41.5 B32526R0227A*** ꢀ
12.0 × 22.0 × 41.5 B32526R1156+*** ꢀ
12.0 × 22.0 × 41.5 B32526R1226+*** ꢀ
14.0 × 25.0 × 41.5 B32526R1336+*** ꢀ
100
63
24.0 × 15.0 × 41.5 B32526T1336+***
16.0 × 28.5 × 41.5 B32526R1476+*** ꢀ
24.0 × 19.0 × 41.5 B32526T1476+***
ꢀ
ꢀ
18.0 × 32.5 × 41.5 B32526R1686+*** ꢀ
20.0 × 39.5 × 41.5 B32526R1107+*** ꢀ
28.0 × 42.5 × 41.5 B32526R1157+*** ꢀ
100
150
250 160
4.7 12.0 × 22.0 × 41.5 B32526R3475+*** ꢀ
6.8 12.0 × 22.0 × 41.5 B32526R3685+*** ꢀ
10
15
15
22
22
33
47
68
12.0 × 22.0 × 41.5 B32526R3106+*** ꢀ
14.0 × 25.0 × 41.5 B32526R3156+*** ꢀ
24.0 × 15.0 × 41.5 B32526T3156+***
16.0 × 28.5 × 41.5 B32526R3226+*** ꢀ
24.0 × 19.0 × 41.5 B32526T3226+***
ꢀ
ꢀ
20.0 × 39.5 × 41.5 B32526R3336+*** ꢀ
20.0 × 39.5 × 41.5 B32526R3476+*** ꢀ
28.0 × 42.5 × 41.5 B32526R3686+*** ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
000 = Untaped (standard lead length 6 ꢀ1 mm)
M = 20%
K = 10%
J = 5%
A = ꢀ15 ... +5% (220 μF type only)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 44
B32526
General purpose (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤60 Hz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
μF
400 200
3.3 12.0 × 22.0 × 41.5 B32526R6335+*** ꢀ
4.7 12.0 × 22.0 × 41.5 B32526R6475+*** ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1620
1620
1040
1380
780
720
640
440
5.6 24.0 × 15.0 × 41.5 B32526T6565+***
6.8 14.0 × 25.0 × 41.5 B32526R6685+*** ꢀ
8.2 24.0 × 19.0 × 41.5 B32526T6825+***
ꢀ
ꢀ
10
15
22
18.0 × 32.5 × 41.5 B32526R6106+*** ꢀ
20.0 × 39.5 × 41.5 B32526R6156+*** ꢀ
28.0 × 42.5 × 41.5 B32526R6226+*** ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
000 = Untaped (standard lead length 6 ꢀ1 mm)
M = 20%
K = 10%
J = 5%
A = ꢀ15 ... +5% (220 μF type only)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 44
B32520 ... B32529
General purpose (stacked/wound)
Technical data
Reference standard: IEC 61071:2007. AEC-Q200D compliance on request. All data given at
T = 20 °C, unless otherwise specified.
Rated temperature TR
+85 °C
Operating temperature range Max. operating temperature Top,max
Upper category temperature Tmax
+125 °C
+125 °C
Lower category temperature Tmin
ꢀ55 °C
+85 °C
Rated temperature TR
Dissipation factor tan δ (in 10-3)
at 20 °C (upper limit values)
at
CR ≤ 0.1 μF 0.1 μF < CR ≤ 1 μF CR > 1 μF
1 kHz 8
10 kHz 15
100 kHz 30
8
10
15
ꢀ
ꢀ
ꢀ
Insulation resistance Rins
VR
CR ≤ 0.33 μF
CR > 0.33 μF
or time constant τ = CR ꢁ Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
≤ 100 V DC 3750 MΩ
≥ 250 V DC 7500 MΩ
1250 s
2500 s
DC test voltage
1.4 ꢁ VR, 2 s
Category voltage VC
(continuous operation with
Top (°C)
Top ≤ 85
DC voltage derating
VC = VR
AC voltage derating
VC,RMS = VRMS
VDC or VAC at f ≤ 60 Hz)
85<Top≤125 VC = VR ꢁ (165ꢀTop)/80 VC,RMS=VRMSꢁ (165ꢀTop)/80
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤ 60 Hz)
Top (°C)
Top ≤ 100
DC voltage (max. hours) AC voltage (max. hours)
Vop = 1.25 ꢁ VC (2000 h) Vop = 1.0 ꢁ VC,RMS (2000 h)
100<Top≤125 Vop = 1.25 ꢁ VC (1000 h) Vop = 1.0 ꢁ VC,RMS (1000 h)
1000 h / 40 °C / 93% relative humidity with VR,DC
Biased humidity
Limit value after biased
humidity test
Capacitance change ꢂΔC/Cꢂ
≤ 5%
Dissipation factor change Δ tan δ
Insulation resistance Rins
≤ 5 ꢁ 10-3 (at 1 kHz)
≥ 50% of minimum
as-delivered values
or time constant τ = CR ꢁ Rins
Reliability:
Failure rate λ
Service life tSL
1 fit (≤ 1 ꢁ 10-9/h) at 0.5 ꢁ VR, 40 °C
200 000 h at 1.0 ꢁ VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change ꢂΔC/Cꢂ
Dissipation factor tan δ
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
> 10%
> 2 ꢁ upper limit value
< 150 MΩ (CR ≤ 0.33 μF)
< 50 s
(CR > 0.33 μF)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 44
B32520 ... B32529
General purpose (stacked/wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/μs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/μs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing 5 mm
Technology
VR VRMS
V DC V AC dV/dt in V/μs
7.5 mm 10 mm
15 mm
S
22.5 mm 27.5 mm 37.5 mm
S
S
S
W
W
W
W
W
50
63
32 200
40 250
63 300
160 400
200 600
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
0.8
1
120
150
200
275
ꢀ
50
30
3
1
100
250
400
450
630
75
150
175
ꢀ
50
5
4
8
3
100
125
ꢀ
10
ꢀ
5
4
10
ꢀ
8.5
6
200
ꢀ
20
ꢀ
ꢀ
ꢀ
ꢀ
400 800
ꢀ
320
150
15
12
S = Stacked, W = Wound
k0 values
Lead spacing 5 mm
Technology
VR VRMS
V DC V AC k0 in V2/μs
7.5 mm 10 mm
15 mm
S
22.5 mm 27.5 mm 37.5 mm
S
S
S
W
W
W
W
W
50
63
32
40
20000
30000
60000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3800
ꢀ
ꢀ
ꢀ
375
ꢀ
130
ꢀ
100
200
2000
6000
ꢀ
15000
6300
100
250
400
450
630
63
30000 15000
10000
50000
850
800
600
160
200
200
200000 100000 75000
500000 220000 140000
5000
ꢀ
4000
10000
ꢀ
2500
8500
ꢀ
ꢀ 100000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
15000
ꢀ
400 1000000
ꢀ 400000
ꢀ 190000
18000
15000
ꢀ
S = Stacked, W = Wound
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 44
B32520 ... B32529
General purpose (stacked/wound)
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 44
B32529
General purpose (stacked)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 5 mm
50 V DC/32 V AC
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 44
B32529
General purpose (stacked)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 5 mm
400 V DC/200 V AC
630 V DC/400 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 44
B32520
General purpose (stacked)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 7.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 44
B32521
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 44
B32521
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
630 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 44
B32522
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 44
B32522
General purpose (stacked/wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
450 V DC/200 V AC
630 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 44
B32523
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 44
B32523
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
630 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 44
B32524
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 44
B32524
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
630 V DC/220 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 44
B32526
General purpose (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤55 °C)
For TA >55 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
63 V DC/40 V AC
100 V DC/63 V AC
250 V DC/160 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 44
B32520 ... B32529
General purpose (stacked/wound)
Mounting guidelines
1
Soldering
Solderability of leads
1.1
The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature
is far higher than the upper category temperature of the capacitors, the terminal wires should be
cut off from the capacitor before the ageing procedure to prevent the solderability being impaired
by the products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 5 °C
2.0 0.5 s
Immersion depth
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Evaluation criteria:
Wetting of wire surface by new solder ≥90%,
free-flowing solder
Visual inspection
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 5 °C
coated
10 1 s
uncoated (lead spacing >10 mm)
MFP
MKP (lead spacing >7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 1 s
(lead spacing ≤7.5 mm)
uncoated (lead spacing ≤10 mm)
insulated (B32559)
MKP
MKT
<4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 34 of 44
B32520 ... B32529
General purpose (stacked/wound)
Immersion depth
Shield
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Heat-absorbing board, (1.5 0.5) mm thick, between
capacitor body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
ΔC/C0
tan δ
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
Please read Cautions and warnings and
Important notes at the end of this document.
Page 35 of 44
B32520 ... B32529
General purpose (stacked/wound)
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommendations
As a reference, the recommended wave soldering profile for our film capacitors is as follows:
Please read Cautions and warnings and
Important notes at the end of this document.
Page 36 of 44
B32520 ... B32529
General purpose (stacked/wound)
Body temperature should follow the description below:
MKP capacitor
During pre-heating: Tp ≤110 °C
During soldering: Ts ≤120 °C, ts ≤45 s
MKT capacitor
During pre-heating: Tp ≤125 °C
During soldering: Ts ≤160 °C, ts ≤45 s
When SMD components are used together with leaded ones, the film capacitors should not pass
into the SMD adhesive curing oven. The leaded components should be assembled after the SMD
curing step.
Leaded film capacitors are not suitable for reflow soldering.
In order to ensure proper conditions for manual or selective soldering, the body temperature of
the capacitor (Ts) must be ≤120 °C.
One recommended condition for manual soldering is that the tip of the soldering iron should
be <360 °C and the soldering contact time should be no longer than 3 seconds.
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please refer to EPCOS Film Capacitor Data Book in case more details are needed.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 37 of 44
B32520 ... B32529
General purpose (stacked/wound)
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
Consult us if application is with severe temperature and humidity condition.
There are no serviceable or repairable parts inside the capacitor. Opening the capacitor or
any attempts to open or repair the capacitor will void the warranty and liability of EPCOS.
Please note that the standards referred to in this publication may have been revised in the
meantime.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage
Make sure that capacitors are stored within the specified 4.5
conditions
Flammability
range of time, temperature and humidity conditions.
Avoid external energy, such as fire or electricity (passive 5.3
"Storage conditions"
flammability), avoid overload of the capacitors (active
flammability) and consider the flammability of materials.
"Flammability"
Resistance to Do not exceed the tested ability to withstand vibration.
5.2
vibration
The capacitors are tested to IEC 60068-2-6:2007.
EPCOS offers film capacitors specially designed for
operation under more severe vibration regimes such as
those found in automotive applications. Consult our
catalog "Film Capacitors for Automotive Electronics".
"Resistance to
vibration"
Topic
Safety information
Reference chapter
"Mounting guidelines"
1 "Soldering"
Soldering
Cleaning
Do not exceed the specified time or temperature limits
during soldering.
Use only suitable solvents for cleaning capacitors.
2 "Cleaning"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 38 of 44
B32520 ... B32529
General purpose (stacked/wound)
Topic
Safety information
Reference chapter
"Mounting guidelines"
3 "Embedding of
Embedding of When embedding finished circuit assemblies in plastic
capacitors in
finished
resins, chemical and thermal influences must be taken capacitors in finished
into account.
assemblies"
assemblies
Caution: Consult us first, if you also wish to embed other
uncoated component types!
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the or-
dering codes are due to different processes employed and do not affect the specifications
of the respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 39 of 44
B32520 ... B32529
General purpose (stacked/wound)
Symbols and terms
Symbol
α
English
German
Heat transfer coefficient
Wärmeübergangszahl
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
C
Humidity coefficient of capacitance
Capacitance
CR
Rated capacitance
Nennkapazität
ΔC
ΔC/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
ΔC/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
Δt
Time interval
Zeitintervall
ΔT
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
Δtan δ
ΔV
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
ΔV/Δt
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 40 of 44
B32520 ... B32529
General purpose (stacked/wound)
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
Serieninduktivität
Ausfallrate
k0
LS
λ
Pulse characteristic
Series inductance
Failure rate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
R
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor Serienanteil des Verlustfaktors
Temperature of the air surrounding the Temperatur der Luft, die das Bauteil
component
umgibt
Tmax
Tmin
tOL
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature, TA + ΔT
Rated temperature
Beriebstemperatur, TA + ΔT
Nenntemperatur
Tref
tSL
Reference temperature
Reference service life
Referenztemperatur
Referenz-Lebensdauer
Please read Cautions and warnings and
Important notes at the end of this document.
Page 41 of 44
B32520 ... B32529
General purpose (stacked/wound)
Symbol
VAC
English
German
AC voltage
Wechselspannung
VC
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Vo
Output voltage
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
(Sinusförmige) Wechselspannung
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 42 of 44
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 43 of 44
Important notes
7. Our manufacturing sites serving the automotive business apply the IATF 16949
standard. The IATF certifications confirm our compliance with requirements regarding the
quality management system in the automotive industry. Referring to customer requirements
and customer specific requirements (“CSR”) TDK always has and will continue to have the
policy of respecting individual agreements. Even if IATF 16949 may appear to support the
acceptance of unilateral requirements, we hereby like to emphasize that only requirements
mutually agreed upon can and will be implemented in our Quality Management System.
For clarification purposes we like to point out that obligations from IATF 16949 shall only
become legally binding if individually agreed upon.
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP,
CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine,
PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other coun-
tries. Further information will be found on the Internet at www.epcos.com/trademarks.
Release 2018-06
Page 44 of 44
相关型号:
B32520C6153K289
CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.015uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32520C6153M000
Film Capacitor, Polyester, 400V, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount, RADIAL LEADED, LEAD FREE
EPCOS
B32520C6153M189
CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.015uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32520C6153M289
Film Capacitor, Polyester, 400V, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount, RADIAL LEADED, LEAD FREE
EPCOS
B32520C6222J003
Film Capacitor, Polyester, 400V, 5% +Tol, 5% -Tol, 0.0022uF, Through Hole Mount, RADIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明