B32561-J6223-K189
更新时间:2024-09-18 14:51:14
品牌:EPCOS
描述:CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED
B32561-J6223-K189 概述
CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED
B32561-J6223-K189 数据手册
通过下载B32561-J6223-K189数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Metallized Polyester Film Capacitors (MKT)
Uncoated (SilverCaps)
B 32 560
… B 32 564
Extremely small dimensions
Versions with special dimensions
can be supplied at short notice
b
Cut
surfaces
Construction
ꢀ Dielectric: polyethylene terephthalate
(polyester)
ꢀ Stacked-film technology
ꢀ Uncoated
ød1
e
KMK0687-U
Features
Dimensions in mm
ꢀ Special dimensions available upon request
ꢀ High pulse strength
ꢀ Minimum tensile strength of leads >10 N
Lead spacing Diameter±d1
± ±0,4
Type
7,5
0,5
0,5
0,6
0,8
0,8
B 32 560
B 32 561
B 32 562
B 32 563
B 32 564
Typical applications
10,0
15,0
22,5
27,5
ꢀ Standard applications
ꢀ Electronic lamp ballast circuits
ꢀ Energy-saving lamps
ꢀ Substitute for electrolytics in electronic
lamp ballasts (420 Vdc)
Terminals
ꢀ Parallel wire leads, tinned
ꢀ Also available with (3,2 ± ±0,3) mm
lead length upon request
ꢀ Taped version of B32560 are also
available with lead spacing 5 mm
(leads bent from 7,5 spacing to 5 mm)
Marking
Rated capacitance (coded),
rated dc voltage
Delivery mode
Bulk (untaped)
Taped (AMMO pack or reel) for
lead spacing ≤ 15,0 mm.
For notes on taping, refer to chapter “Taping and packing”, page 274.
Notes on mounting
When mounting these capacitors, take into account creepage distances and clearances to adjacent
live parts. The insulating strength of the cut surfaces to other live parts of the circuit is 1,5 times the
capacitors rated dc voltage, but is always at least 300 Vdc.
Capacitors with 7,5 mm lead spacing are only suitable for use with single-clad printed circuit boards.
41 12/00
MKT
B 32 560 …
B 32 564
Overview of available types
Lead
7,5 mm
10 mm
15 mm
22,5 mm
27,5 mm
spacing
Type
B 32 560
43
B 32 561
45
B 32 562
46
B 32 563
47
B 32 564
48
Page
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
0,10 µF
0,15 µF
0,22 µF
0,33 µF
0,47 µF
0,68 µF
1,0 µF
1,5 µF
2,2 µF
3,3 µF
4,7 µF
5,6 µF1)
6,8 µF
10 µF
15 µF
22 µF
33 µF
1) For B 32 564, 420 Vdc only
42 12/00
B 32 560
MKT
7,5
Ordering codes and packing units, lead spacing 7,5 mm
VR
(Vrms
f ≤ 60 Hz)
63 Vdc
(40 Vac)
CR
Maximum
Ordering code1)
Packing units (pcs)
dimensions
b × h × l (mm)
,
Ammo
pack
Reel
Untaped
2)
2)
2)
0,22 µF 2,5 × 5,2 × 9,0 B32560-J224-+
0,33 µF 2,5 × 5,6 × 9,0 B32560-J334-+
0,47 µF 2,6 × 5,8 × 9,0 B32560-J474-+
0,68 µF 3,2 × 6,2 × 9,0 B32560-J684-+
1,0 µF
1,5 µF
2,2 µF
3,3 µF
4,7 µF
2500
2500
2000
1500
1000
500
500
350
250
2)
3250
2850
2200
1700
1300
–
2600
2300
1800
1400
1100
–
***
***
***
***
***
4,0 × 6,8 × 9,0 B32560-J105-+
5,1 × 7,6 × 9,0 B32560-J155-+
6,5 × 8,2 × 9,0 B32560-J225-+
8,5 × 9,1 × 9,0 B32560-J335-+
9,8 × 11,0 × 9,0 B32560-J475-+
–
–
6,8 µF 11,5 × 13,3 × 9,0 B32560-J685-+
–
2)
–
2)
150
100 Vdc
(63 Vac)
0,10 µF 2,5 × 4,7 × 9,0 B32560-J1104-+
0,15 µF 2,5 × 4,7 × 9,0 B32560-J1154-+
0,22 µF 2,5 × 5,1 × 9,0 B32560-J1224-+
0,33 µF 2,7 × 5,7 × 9,0 B32560-J1334-+
0,47 µF 3,4 × 6,1 × 9,0 B32560-J1474-+
0,68 µF 4,2 × 6,5 × 9,0 B32560-J1684-+
3000
3000
2000
1500
1200
1000
500
2)
2)
3400
3100
2500
2000
1600
–
2700
2500
2000
1600
1300
–
***
***
***
***
***
1,0 µF
1,5 µF
2,2 µF
33 nF
47 nF
68 nF
5,5 × 7,0 × 9,0 B32560-J1105-+
6,7 × 8,2 × 9,0 B32560-J1155-+
8,5 × 9,2 × 9,0 B32560-J1225-+
2,5 × 4,8 × 9,0 B32560-J3333-+
2,5 × 5,2 × 9,0 B32560-J3473-+
2,6 × 5,7 × 9,0 B32560-J3683-+
400
300
–
2)
–
2)
250 Vdc
(160 Vac)
3000
2300
1700
1200
1000
650
3500
3400
2650
2150
1750
–
2800
2700
2200
1800
1400
–
***
***
***
***
***
0,10 µF 3,2 × 6,1 × 9,0 B32560-J3104-+
0,15 µF 3,9 × 7,0 × 9,0 B32560-J3154-+
0,22 µF 4,9 × 7,5 × 9,0 B32560-J3224-+
0,33 µF 6,4 × 8,2 × 9,0 B32560-J3334-+
500
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J
Special dimensions available upon request.
For corresponding design rules, refer to chapter “General technical information”, page 290.
1)
+ Code letter for capacitance tolerance
*** Code number for packing: Ammo pack = 289, reel = 189
Lead spacing changed from 7,5 to 5 mm by bending leads: Ammo pack = 259, reel = 159
The ordering code for untaped components ends after the tolerance code letter.
2) Taping upon request
43 12/00
MKT
7,5
B 32 560
Ordering codes and packing units, lead spacing 7,5 mm
VR
(Vrms
f ≤ 60 Hz)
400 Vdc
(200 Vac)
CR
Maximum
Ordering code1)
Packing units (pcs)
dimensions
b × h × l (mm)
,
Ammo
pack
Reel
Untaped
2)
2)
1,0 nF 2,5 × 5,5 × 9,0
1,5 nF 2,5 × 5,5 × 9,0
2,2 nF 2,5 × 5,5 × 9,0
3,3 nF 2,5 × 5,5 × 9,0
4,7 nF 2,5 × 5,5 × 9,0
6,8 nF 2,5 × 5,5 × 9,0
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
0,10 µF 4,9 × 7,7 × 9,0
0,15 µF 6,5 × 8,2 × 9,0
1,0 nF 2,5 × 5,5 × 9,0
1,5 nF 2,5 × 5,5 × 9,0
2,2 nF 2,5 × 5,5 × 9,0
3,3 nF 2,5 × 5,5 × 9,0
4,7 nF 2,5 × 5,5 × 9,0
6,8 nF 3,2 × 6,5 × 9,0
B32560-J6102-+
B32560-J6152-+
B32560-J6222-+
B32560-J6332-+
B32560-J6472-+
B32560-J6682-+
B32560-J6103-+
B32560-J6153-+
B32560-J6223-+
B32560-J6333-+
B32560-J6473-+
B32560-J6683-+
B32560-J6104-+
B32560-J6154-+
B32560-J8102-+
B32560-J8152-+
B32560-J8222-+
B32560-J8332-+
B32560-J8472-+
B32560-J8682-+
B32560-J8103-+
2300
2000
2100
2000
2000
2000
2200
2500
2300
1600
1200
1000
500
3500
3700
3400
3700
3700
3500
3500
3400
3400
2650
2250
1750
2900
3000
2800
3000
3000
2800
2800
2700
2700
2200
1900
1400
***
***
***
***
***
***
***
***
***
***
***
***
2,5 × 5,5 × 9,0
2,5 × 5,5 × 9,0
2,5 × 5,5 × 9,0
2,6 × 6,0 × 9,0
3,2 × 6,5 × 9,0
3,8 × 7,3 × 9,0
–
–
500
2)
2)
630 Vdc
(400 Vac)
2300
2000
2100
2000
1800
1300
1000
3500
3700
3400
3400
2900
2400
2900
3000
2800
2700
2400
2000
***
***
***
***
***
***
10 nF
3,8 × 7,5 × 9,0
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J
Special dimensions available upon request.
For corresponding design rules, refer to chapter “General technical information”, page 290.
1)
+ Code letter for capacitance tolerance
*** Code number for packing: Ammo pack = 289, reel = 189
Lead spacing changed from 7,5 to 5 mm by bending leads: Ammo pack = 259, reel = 159
The ordering code for untaped components ends after the tolerance code letter.
2) Taping upon request
44 12/00
B 32 561
MKT
10
Ordering codes and packing units, lead spacing 10 mm
VR
(Vrms
f ≤ 60 Hz)
100 Vdc
(63 Vac)
CR
Maximum
Ordering code1)
Packing units (pcs)
dimensions
b × h × l (mm)
,
Ammo
pack
Reel
Untaped
0,33 µF 2,5 × 5,2 × 11,5
0,47 µF 2,9 × 5,8 × 11,5
0,68 µF 3,6 × 6,3 × 11,5
1,0 µF 4,5 × 6,9 × 11,5
1,5 µF 5,6 × 7,8 × 11,5
2,2 µF 6,9 × 9,0 × 11,5
B32561-J1334-+
B32561-J1474-+
B32561-J1684-+
B32561-J1105-+
B32561-J1155-+
B32561-J1225-+
B32561-J3473-+
B32561-J3683-+
B32561-J3104-+
B32561-J3154-+
B32561-J3224-+
B32561-J3334-+
B32561-J3474-+
B32561-J6103-+
B32561-J6153-+
B32561-J6223-+
B32561-J6333-+
B32561-J6473-+
B32561-J6683-+
B32561-J6104-+
B32561-J6154-+
B32561-J6224-+
1750
1560
1260
1050
810
2400
2300
2000
1500
1200
1600
1200
1000
500
500
400
2300
1800
1300
1000
700
***
***
***
***
***
–
–
2)
2)
250 Vdc
(160 Vac)
47 nF
68 nF
2,5 × 4,4 × 11,5
2,5 × 4,8 × 11,5
1760
1600
1300
1040
850
2400
2300
2000
1600
1300
1000
2400
2500
2500
2400
2400
2100
1700
1300
–
***
***
***
***
***
***
***
***
***
***
***
***
***
***
0,10 µF 2,8 × 5,3 × 11,5
0,15 µF 3,3 × 6,0 × 11,5
0,22 µF 4,2 × 6,6 × 11,5
0,33 µF 5,2 × 7,5 × 11,5
0,47 µF 6,3 × 8,5 × 11,5
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
500
400
700
400 Vdc
(200 Vac)
2,5 × 5,1 × 11,5
2,5 × 5,1 × 11,5
2,5 × 5,1 × 11,5
2,5 × 5,1 × 11,5
2,6 × 6,0 × 11,5
3,2 × 6,6 × 11,5
1760
1830
1830
1760
1760
1390
1090
850
1700
2000
2000
1700
1300
1000
700
0,10 µF 4,0 × 6,9 × 11,5
0,15 µF 5,2 × 7,7 × 11,5
0,22 µF 6,6 × 8,5 × 11,5
500
300
–
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J
Special dimensions available upon request.
For corresponding design rules, refer to chapter “General technical information”, page 290.
1)
+ Code letter for capacitance tolerance
*** Code number for packing: Ammo pack = 289, reel = 189
The ordering code for untaped components ends after the tolerance code letter.
2) Taping upon request
45 12/00
MKT
15
B 32 562
Ordering codes and packing units, lead spacing 15 mm
VR
(Vrms
f ≤ 60 Hz)
100 Vdc
(63 Vac)
CR
Maximum
Ordering code1)
Packing units (pcs)
dimensions
b × h × l (mm)
,
Ammo
pack
Reel
Untaped
1,0 µF
1,5 µF
2,2 µF
3,3 µF
4,7 µF
6,8 µF
10 µF
3,2 × 6,3 × 16,5 B32562-J1105-+
4,0 × 7,3 × 16,5 B32562-J1155-+
4,9 × 8,0 × 16,5 B32562-J1225-+
6,0 × 9,3 × 16,5 B32562-J1335-+
7,3 × 10,6 × 16,5 B32562-J1475-+
9,0 × 11,8 × 16,5 B32562-J1685-+
11,8 × 13,0 × 16,5 B32562-J1106-+
1750
1460
1190
960
790
640
–
2000
1500
1300
1000
900
700
–
1500
1000
800
500
400
290
200
1700
1200
950
500
500
300
200
150
1800
1800
1600
1200
850
500
450
300
200
700
500
350
250
180
***
***
***
***
***
***
250 Vdc
(160 Vac)
0,22 µF 3,2 × 5,6 × 16,5 B32562-J3224-+
0,33 µF 4,0 × 6,2 × 16,5 B32562-J3334-+
1750
1460
1190
960
830
660
–
2000
1500
1300
1000
900
700
–
***
***
***
***
***
***
0,47 µF
5,0 × 6,7 × 16,5 B32562-J3474-+
0,68 µF 6,0 × 7,8 × 16,5 B32562-J3684-+
1,0 µF
1,5 µF
7,0 × 9,3 × 16,5 B32562-J3105-+
8,7 × 11,0 × 16,5 B32562-J3155-+
2,2 µF 10,7 × 12,8 × 16,5 B32562-J3225-+
3,3 µF 13,9 × 14,5 × 16,5 B32562-J3335-+
–
–
400 Vdc
(200 Vac)
47 nF
68 nF
3,3 × 5,6 × 16,5 B32562-J6473-+
3,3 × 5,6 × 16,5 B32562-J6683-+
1870
1800
1700
1420
1240
960
790
640
–
–
–
–
–
2100
2000
1900
1600
1300
1000
900
700
–
–
–
–
–
***
***
***
***
***
***
***
***
0,10 µF 3,3 × 5,6 × 16,5 B32562-J6104-+
0,15 µF 3,9 × 6,5 × 16,5 B32562-J6154-+
0,22 µF 4,7 × 7,5 × 16,5 B32562-J6224-+
0,33 µF 6,0 × 8,3 × 16,5 B32562-J6334-+
0,47 µF 7,3 × 9,3 × 16,5 B32562-J6474-+
0,68 µF 8,9 × 10,8 × 16,5 B32562-J6684-+
1,0 µF 10,9 × 12,5 × 16,5 B32562-J6105-+
0,10 µF 6,2 × 9,3 × 16,5 B32562-J8104-+
0,15 µF 7,6 × 10,8 × 16,5 B32562-J8154-+
0,22 µF 9,2 × 12,2 × 16,5 B32562-J8224-+
0,33 µF 11,2 × 14,2 × 16,5 B32562-J8334-+
0,47 µF 13,5 × 16,3 × 16,5 B32562-J8474-+
630 Vdc
(350 Vac)
–
–
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J
Special dimensions available upon request.
For corresponding design rules, refer to chapter “General technical information”, page 290.
1)
+ Code letter for capacitance tolerance
*** Code number for packing: Ammo pack = 289, reel = 189
The ordering code for untaped components ends after the tolerance code letter.
46 12/00
B 32 563
MKT
22,5
Ordering codes and packing units, lead spacing 22,5 mm
VR
(Vrms
f ≤ 60 Hz)
100 Vdc
(63 Vac)
CR
Maximum
Ordering code1)
Packing units (pcs)
Untaped
dimensions
b × h × l (mm)
,
3,3 µF
4,7 µF
6,8 µF
10 µF
15 µF
22 µF
5,0 × 8,2 × 24,0 B32563-J1335-+
5,9 × 9,0 × 24,0 B32563-J1475-+
7,0 × 10,5 × 24,0 B32563-J1685-+
8,6 × 12,2 × 24,0 B32563-J1106-+
10,9 × 14,0 × 24,0 B32563-J1156-+
12,8 × 17,2 × 24,0 B32563-J1226-+
1900
1600
920
960
620
360
250 Vdc
(160 Vac)
0,68 µF 4,8 × 7,2 × 24,0 B32563-J3684-+
1760
1140
920
1,0 µF
1,5 µF
2,2 µF
5,6 × 8,2 × 24,0 B32563-J3105-+
6,9 × 9,5 × 24,0 B32563-J3155-+
8,3 × 11,2 × 24,0 B32563-J3225-+
740
3,3 µF 10,1 × 13,5 × 24,0 B32563-J3335-+
4,7 µF 12,2 × 15,5 × 24,0 B32563-J3475-+
0,33 µF 5,1 × 8,0 × 24,0 B32563-J6334-+
0,47 µF 5,7±× 8,3 × 24,0 B32563-J6474-+
0,68 µF 6,9 × 9,6 × 24,0 B32563-J6684-+
700
390
1700
1660
920
400 Vdc
(200Vac)
1,0 µF
8,3 × 11,2 × 24,0 B32563-J6105-+
850
1,5 µF 10,3 × 13,2 × 24,0 B32563-J6155-+
2,2 µF 12,6 × 15,5 × 24,0 B32563-J6225-+
660
360
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J
Special dimensions available upon request.
For corresponding design rules, refer to chapter “General technical information”, page 290.
1) + Code letter for capacitance tolerance
47 12/00
MKT
27,5
B 32 564
Ordering codes and packing units, lead spacing 27,5 mm
VR
(Vrms
f ≤ 60 Hz)
100 Vdc
(63Vac)
CR
Maximum
Ordering code1)
Packing units (pcs)
Untaped
dimensions
b × h × l (mm)
,
4,7 µF
6,8 µF
10 µF
15 µF
22 µF
33 µF
1,0 µF
1,5 µF
2,2 µF
3,3 µF
4,7 µF
5,6 × 8,3 × 29,0 B32564-J1475-+
6,3 × 9,5 × 29,0 B32564-J1685-+
7,6 × 11,0 × 29,0 B32564-J1106-+
9,1 × 13,5 × 29,0 B32564-J1156-+
11,0 × 16,0 × 29,0 B32564-J1226-+
13,0 × 19,8 × 29,0 B32564-J1336-+
5,1 × 7,6 × 29,0 B32564-J3105-+
5,3 × 10,2 × 29,0 B32564-J3155-+
6,4 × 11,8 × 29,0 B32564-J3225-+
7,9 × 14,0 × 29,0 B32564-J3335-+
9,6 × 15,8 × 29,0 B32564-J3475-+
1000
820
680
430
320
360
1620
970
920
750
400
300
280
750
750
400
330
260
290
350
290
250 Vdc
(160 Vac)
6,8 µF 11,9 × 18,0 × 29,0 B32564-J3685-+
10 µF
1,0 µF
1,5 µF
2,2 µF
13,8 × 22,5 × 29,0 B32564-J3106-+
6,8 × 11,2 × 29,0 B32564-J6105-+
7,8 × 14,2 × 29,0 B32564-J6155-+
9,6 × 16,4 × 29,0 B32564-J6225-+
400 Vdc
(200 Vac)
3,3 µF 12,2 × 18,8 × 29,0 B32564-J6335-+
4,7 µF 14,2 × 22,8 × 29,0 B32564-J6475-+
4,7 µF 16,0 × 20,0 × 29,0 B32564-T6475-K
5,6 µF 16,0 × 20,0 × 29,0 B32564-T6565-K
6,8 µF 16,0 × 20,0 × 29,0 B32564-T6685-K
420 Vdc
(200 Vac)
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J
Special dimensions available upon request.
For corresponding design rules, refer to chapter “General technical information”, page 290.
1)
+
Code letter for capacitance tolerance
48 12/00
B 32 560
MKT
… B 32 564
Technical data
Climatic category
55/100/561)
in accordance with IEC 60068-1
Lower category temperature Tmin − 55 °C
Upper category temperature Tmax + 100 °C (+ 125 °C for 1000 h and VC = 0,5 ⋅ VR)
Damp heat test
56 days/40 °C/93 % relative humidity
Limit values after damp
heat test1)
Capacitance change |∆C/C|
Dissipation factor change ∆ tan δ
≤ 5 %
≤ 3 ⋅ 10−3 (at 1 kHz)
≤ 5 ⋅ 10−3 (at 10 kHz)
≥ 50 % of minimum
as-delivered values
Insulation resistance Ris
or time constant τ = CR ⋅ Ris
Reliability:
Reference conditions
Failure rate
0,5±⋅ VR; 40 °C
2 ⋅10−9/h = 2 fit
For a conversion table for other operating conditions and tem-
peratures, refer to chapter “Quality assurance”, page 327.
Service life
200 000 h
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change |∆C/C|
Dissipation factor tan δ
Insulation resistance Ris
> 10 %
> 2 ⋅ upper limit value
< 150 MΩ (CR±≤ 0,33 µF)
or time constant τ = CR ⋅ Ris
<±50 s
(CR±> 0,33 µF)
DC test voltage
1,4 ⋅ VR, 2 s
Category voltage VC
Operation with dc voltage or
ac voltage Vrms up to 60 Hz
T ≤ 85 °C VC = 1,0 ⋅ VR
T ≤ 100 °C VC = 0,8 ⋅ VR
VC,rms = 1,0 ⋅ Vrms
VC,rms = 0,8 ⋅ Vrms
Operating voltage for
short operating periods
T ≤ 85 °C V = 1,25 ⋅ VC, max. 2000 h V = 1,0 ⋅ VC,rms, max. 2000 h
T ≤ 100 °C V = 1,25 ⋅ VC, max. 2000 h V = 1,0 ⋅ VC,rms, max. 2000 h
T ≤ 125 °C V = 0,5 ⋅ VR, max. 1000 h V = 0,5 ⋅ Vrms, max. 1000 h
Dissipation factor tan δ±(in 10−3
at 20 °C
(upper limit values)
)
CR ≤ 0,1 µF 0,1 µF <±CR ≤±1 µF CR > 1 µF
at
1 kHz
8
8
15
–
10
–
10 kHz 15
100 kHz 30
–
Insulation resistance Ris
VR
CR ≤ 0,33 µF
3750 MΩ
7500 MΩ
CR > 0,33 µF
1250 s
2500 s
or time constant τ = CR ⋅ Ris
at 20 °C, rel. humidity ≤ 65 %
(minimum as-delivered values)
≤±100 Vdc
≥ 250 Vdc
1) Test criteria must be met after exposure to damp heat for 21 days.
49 12/00
MKT
B 32 560 …
B 32 564
Impedance Z
versus
frequency f
KMK0418-A
101
Ω
Z
(typical values)
100
5
_1
10
5
_2
10
10
5
_3
105
5
106
5
107
Hz
108
f
Pulse handling capability
Maximum permissible voltage change per unit of time for non-sinusoidal voltages
(pulse, sawtooth).
VR
Max. rate of voltage rise Vpp/τ in V/µs (for Vpp = VR)
Lead spacing
7,5 mm
120
150
200
275
–
10 mm
15 mm
–
22,5 mm
27,5 mm
63 Vdc
–
–
–
100 Vdc
250 Vdc
400 Vdc
420 Vdc
630 Vdc
75
150
175
–
50
50
100
125
–
25
50
60
60
–
100
125
–
320
–
150
–
For Vpp <±VR , the permissible voltage rise rate value Vpp/τ may be multiplied by the factor VR/Vpp
.
Also refer to the calculation example in chapter “General technical information”, page 302.
VR
Pulse characteristic k0 in V2/µs (for Vpp ≤±VR)
Lead spacing
7,5 mm
15 000
30 000
100 000
220 000
–
10 mm
–
15 mm
–
22,5 mm
27,5 mm
–
63 Vdc
–
100 Vdc
250 Vdc
400 Vdc
420 Vdc
630 Vdc
15 000
75 000
140 000
–
10 000
50 000
100 000
–
10 000
50 000
100 000
–
5 000
25 000
50 000
50 000
–
400 000
–
190 000
–
50 12/00
B 32 560
MKT
7,5
Permissible ac voltage Vrms versus frequency f
Lead spacing 7,5 mm
63 Vdc/ 40 Vac
100 Vdc/ 63 Vac
KMK0582-H
KMK0583-Q
400
Vac
200
400
Vac
200
Vrms
Vrms
100
100
60
40
60
40
20
20
10
10
0,22 µF
0,1 µF
6
0,68 µF
6
4
0,33 µF
0,68 µF
1,5 µF
2,2 µF
4
2
1
2,2 µF
6,8 µF
2
1
102
5
103
5
104
5
105
Hz 106
102
5
103
5
104
5
105
Hz 106
f
f
250Vdc/ 160Vac
400 Vdc/ 200 Vac
Vac
Vac
Vrms
Vrms
51 12/00
MKT
7,5
B 32 560
Permissible ac voltage Vrms versus frequency f
Lead spacing 7,5 mm
630 Vdc/ 400 Vac
52 12/00
B 32 561
MKT
10
Permissible ac voltage Vrms versus frequency f
Lead spacing 10 mm
100 Vdc/ 63 Vac
250 Vdc/ 160 Vac
Vac
Vac
Vrms
Vrms
400 Vdc/ 200 Vac
Vac
Vrms
53 12/00
MKT
15
B 32 562
Permissible ac voltage Vrms versus frequency f
Lead spacing 15 mm
100 Vdc/63 Vac
250 Vdc/ 160 Vac
Vac
Vac
Vrms
Vrms
400 Vdc/200 Vac
630 Vdc/350 Vac
KMK0581-9
400
Vac
Vac
200
Vrms
100
60
40
20
10
47 nF
0,1 µF
0,33 µF
1,0 µF
6
4
2
1
102
5
103
5
104
5
105
Hz 106
f
54 12/00
B 32 563
MKT
22,5
Permissible ac voltage Vrms versus frequency f
Lead spacing 22,5 mm
100 Vdc/ 63 Vac
250 Vdc/ 160 Vac
KMK0579-X
400
Vac
Vac
200
Vrms
Vrms
100
60
40
20
10
6
3,3 µF
4
4,7 µF
22 µF
2
1
102
5
103
5
104
5
105
Hz 106
f
400 Vdc/ 200 Vac
KMK0580-1
400
Vac
200
Vrms
100
60
40
20
10
0,33 µF
0,68 µF
2,2 µF
6
4
2
1
102
5
103
5
104
5
105
Hz 106
f
55 12/00
MKT
27,5
B 32 564
Permissible ac voltage Vrms versus frequency f
Lead spacing 27,5 mm
100 Vdc/ 63 Vac
250 Vdc/ 160 Vac
400 Vdc/ 200 Vac
Vac
Vrms
56 12/00
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-
genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-
sellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-
chure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be con-
sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
B32561-J6223-K189 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
B32561-J6223-K289 | EPCOS | CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.022uF, THROUGH HOLE MOUNT, AXIAL LEADED | 获取价格 | |
B32561-J6223-M | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6224-J | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6224-K | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6224-K | EPCOS | CAPACITOR, METALLIZED FILM, POLYESTER, 400V, 0.22uF, THROUGH HOLE MOUNT, AXIAL LEADED | 获取价格 | |
B32561-J6224-M | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6333-J | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6333-K | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6333-M | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 | |
B32561-J6473-J | INFINEON | Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) | 获取价格 |
B32561-J6223-K189 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6