B32653A2682J000 [EPCOS]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE;型号: | B32653A2682J000 |
厂家: | EPCOS |
描述: | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE 电容器 |
文件: | 总61页 (文件大小:1255K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polypropylene Film Capacitors (MKP)
Series/Type:
B32651 ... B32658
Date:
June 2018
© EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polypropylene film capacitors (MKP)
High pulse (wound)
B32651 ... B32658
Typical applications
Electronic ballasts
Switch-mode power supplies
IGBT
Snubbering
Climatic
Max. operating temperature: 110 °C
Climatic category (IEC 60068-1:2013): 55/100/56
Construction
Dielectric: polypropylene (PP)(MKP)
Wound capacitor technology with internal
series connection
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Features
High pulse strength
High contact reliability
RoHS-compatible
Very low inductance
Halogen-free capacitors available on request
AEC-Q200D compliant
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Manufacturer's logo,
lot number (
≤27.5 mm), series number (e.g. 651),
rated capacitance (coded), cap. tolerance (code letter),
rated DC voltage (AC voltage for 1600 V DC/700 V AC
and 2000 V DC/1000 V AC),
date of manufacture (coded)
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping, refer to chapter "Taping and packing“.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 61
B32651 ... B32658
High pulse (wound)
Dimensional drawings
Number of wires
Lead spacing
0.4
10
Lead diameter d1 Type
0.05
0.6
Drawing
2-pin
B32651
A1
A1
A1
A1
A1
A2
B1
B1
2-pin
15
0.8
0.8
0.8
1.0
1.0
1.2
1.2
B32652
2-pin
22.5
27.5
37.5
37.5
37.5
52.5
B32653
2-pin
B32654
2-pin
B32656A/J
B32656T
B32656G
B32658G
2-pin
4-pin
4-pin
(Dimensions in mm)
Dimensional drawings 2-pin versions
Drawing A1
B32651 B32652 B32653 B32654 B32656A/J
Lead spacing
Lead diameter d1:
0.4:
10
0.6
15
0.8
22.5
0.8
27.5
0.8
37.5
1.0
(Dimensions in mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 61
B32651 ... B32658
High pulse (wound)
Drawing A2 (low profile)
Lead spacing
0.4:
37.5
1.0
Lead diameter d1:
(Dimensions in mm)
Dimensional drawings 4-pin versions
Drawing B1
B32656G B32658G
0.4: 37.5 52.5
1.2 1.2
Lead spacing
Lead diameter d1:
(Dimensions in mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 10 mm
Type
B32651
12
Page
VR (V DC)
1250
VRMS (V AC) 450
CR (nF)
2.2
3.3
4.7
6.8
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 15 mm
Type
B32652
13
Page
VR (V DC)
250
400
200
630
250
1000
250
1250
500
1600
500
1600
700
2000
700
VRMS (V AC) 160
CR (nF)
1.0
1.5
2.2
3.3
4.7
5.6
6.8
10
12
15
22
33
47
56
68
100
120
150
220
330
390
470
560
680
820
1000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 22.5 mm
Type
B32653
16
Page
VR (V DC)
250
400
200
630
250
1000
250
1250
500
1600
500
2000
700
2000
1000
VRMS (V AC) 160
CR (nF)
2.2
3.3
4.7
6.8
10
12
15
22
33
47
56
68
82
100
120
150
220
330
470
560
680
1000
1200
1500
2200
3300
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 27.5 mm
Type
B32654
19
Page
VR (V DC)
250
400
200
630
250
1000
250
1250
500
1600
500
2000
700
VRMS (V AC) 160
CR (nF)
22
33
47
68
82
100
150
220
330
470
560
680
820
1000
1200
1500
2200
2700
3300
4700
5600
6800
8200
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 37.5 mm
Type
B32656
21
Page
VR (V DC)
250
400
200
630
250
750
350
VRMS (V AC) 160
CR (nF)
470
560
680
820
1000
1200
1500
1800
2000
2200
2500
2700
3000
3300
3500
4000
4700
5600
6800
7000
7500
8000
10000
12000
14000
15000
17000
20000
24000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 37.5 mm
Type
B32656
24
Page
VR (V DC)
850
1000
500
1250
500
1600
600
2000
700
VRMS (V AC) 450
CR (nF)
68
100
120
150
220
270
330
390
470
560
680
820
900
1000
1200
1500
1800
2200
2500
2700
3000
3300
3800
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 61
B32651 ... B32658
High pulse (wound)
Overview of available types
Lead spacing 52.5 mm
Type
B32658
28
Page
VR (V DC)
250
400
200
630
250
750
350
850
450
1000
500
1250
500
1600
600
2000
700
VRMS (V AC) 160
CR (nF)
680
820
1000
1200
1500
2000
2200
2700
3300
4500
4700
5600
6000
6800
9000
12000
15000
20000
26000
30000
40000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 61
B32651
High pulse (wound)
Ordering codes and packing units (lead spacing 10 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC1) V AC
nF
1250
450
2.2
3.3
4.7
6.8
4.0 × 9.0 × 13.0 B32651A7222+*** 4000
5.0 × 11.0 × 13.0 B32651A7332+*** 3320
5.0 × 11.0 × 13.0 B32651A7472+*** 3320
6.0 × 12.0 × 13.0 B32651A7682+*** 2720
6800
5200
5200
4400
4000
4000
4000
4000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
1) For pulse loads (pulse width ≤1000 μs), a peak voltage of 1400 Vp can be permitted.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 61
B32652
High pulse (wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
nF
250 160
150
5.0 × 10.5 × 18.0 B32652A3154+*** 4680
6.0 × 11.0 × 18.0 B32652A3224+*** 3840
7.0 × 12.5 × 18.0 B32652A3334+*** 3320
8.5 × 14.5 × 18.0 B32652A3474+*** 2720
9.0 × 17.5 × 18.0 B32652A3684+*** 2560
11.0 × 18.5 × 18.0 B32652A3824+*** ꢀ
11.0 × 18.5 × 18.0 B32652A3105+*** ꢀ
5.0 × 10.5 × 18.0 B32652A4683+*** 4680
5.0 × 10.5 × 18.0 B32652A4104+*** 4680
6.0 × 11.0 × 18.0 B32652A4154+*** 3840
7.0 × 12.5 × 18.0 B32652A4224+*** 3320
8.5 × 14.5 × 18.0 B32652A4334+*** 2720
9.0 × 17.5 × 18.0 B32652A4474+*** 2560
11.0 × 18.5 × 18.0 B32652A4564+*** ꢀ
11.0 × 18.5 × 18.0 B32652A4684+*** ꢀ
5.0 × 10.5 × 18.0 B32652A6333+*** 4680
5.0 × 10.5 × 18.0 B32652A6473+*** 4680
6.0 × 11.0 × 18.0 B32652A6683+*** 3840
7.0 × 12.5 × 18.0 B32652A6104+*** 3320
8.5 × 14.5 × 18.0 B32652A6154+*** 2720
9.0 × 17.5 × 18.0 B32652A6224+*** 2560
11.0 × 18.5 × 18.0 B32652A6334+*** ꢀ
11.0 × 18.5 × 18.0 B32652A6394+*** ꢀ
5200
4400
3600
2800
2800
2200
2200
5200
5200
4400
3600
2800
2800
2200
2200
5200
2800
4400
3600
2800
2800
2200
2200
4000
4000
1000
2000
2000
1200
1200
4000
4000
4000
4000
2000
2000
1200
1200
4000
4000
4000
4000
2000
2000
1200
1200
220
330
470
680
820
1000
68
100
150
220
330
470
560
680
33
400 200
630 250
47
68
100
150
220
330
390
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 61
B32652
High pulse (wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
nF
1000 250
10
15
22
33
47
68
100
120
150
5.0 × 10.5 × 18.0 B32652A0103+*** 4680
5.0 × 10.5 × 18.0 B32652A0153+*** 4680
5.0 × 10.5 × 18.0 B32652A0223+*** 4680
6.0 × 11.0 × 18.0 B32652A0333+*** 3840
7.0 × 12.5 × 18.0 B32652A0473+*** 3320
8.5 × 14.5 × 18.0 B32652A0683+*** 2720
9.0 × 17.5 × 18.0 B32652A0104+*** 2560
11.0 × 18.5 × 18.0 B32652A0124+*** ꢀ
11.0 × 18.5 × 18.0 B32652A0154+*** ꢀ
5200
5200
5200
4400
3600
2800
2800
2200
2200
5200
4400
3600
2800
2800
2200
2200
5200
4400
3600
2800
2800
2200
4000
4000
4000
4000
4000
2000
2000
1200
1200
4000
4000
4000
2000
2000
1200
1200
4000
4000
4000
2000
2000
1200
1250 500
6.8 5.0 × 10.5 × 18.0 B32652A7682+*** 4680
10
6.0 × 11.0 × 18.0 B32652A7103+*** 3840
7.0 × 12.5 × 18.0 B32652A7153+*** 3320
8.5 × 14.5 × 18.0 B32652A7223+*** 2720
9.0 × 17.5 × 18.0 B32652A7333+*** 2560
11.0 × 18.5 × 18.0 B32652A7473+*** ꢀ
11.0 × 18.5 × 18.0 B32652A7563+*** ꢀ
15
22
33
47
56
1600 500
3.3 5.0 × 10.5 × 18.0 B32652A1332+*** 4680
4.7 6.0 × 11.0 × 18.0 B32652A1472+*** 3840
6.8 7.0 × 12.5 × 18.0 B32652A1682+*** 3320
10
15
22
8.5 × 14.5 × 18.0 B32652A1103+*** 2720
9.0 × 17.5 × 18.0 B32652A1153+*** 2560
11.0 × 18.5 × 18.0 B32652A1223+*** ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 61
B32652
High pulse (wound)
Ordering codes and packing units (lead spacing 15 mm)
VR
VRMS
f ≤1 kHz
CR
nF
Max. dimensions Ordering code
w × h × l
mm
Ammo
(composition see pack
below) pcs./MOQ pcs./MOQ pcs./MOQ
Reel
Untaped
V DC V AC
1600 700
2.2 5.0 × 10.5 × 18.0 B32652J1222+*** 4680
3.3 6.0 × 11.0 × 18.0 B32652J1332+*** 3840
4.7 7.0 × 12.5 × 18.0 B32652J1472+*** 3320
6.8 8.5 × 14.5 × 18.0 B32652J1682+*** 2720
5200
4400
3600
2800
2800
2800
2200
5200
4400
3600
2800
2800
2200
2200
4000
4000
4000
2000
2000
2000
1200
4000
4000
4000
2000
2000
1000
1200
10
12
15
9.0 × 17.5 × 18.0 B32652J1103+*** 2560
9.0 × 17.5 × 18.0 B32652J1123+*** 2560
11.0 × 18.5 × 18.0 B32652J1153+*** ꢀ
2000 700
1.0 5.0 × 10.5 × 18.0 B32652A2102+*** 4680
1.5 6.0 × 11.0 × 18.0 B32652A2152+*** 3840
2.2 7.0 × 12.5 × 18.0 B32652A2222+*** 3320
3.3 8.5 × 14.5 × 18.0 B32652A2332+*** 2720
4.7 9.0 × 17.5 × 18.0 B32652A2472+*** 2560
5.6 9.0 × 17.5 × 18.0 B32652A2562+*** ꢀ
6.8 11.0 × 18.5 × 18.0 B32652A2682+*** ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 61
B32653
High pulse (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
Ammo
pack pcs./
MOQ
V DC V AC
nF
250 160
220
330
470
6.0 × 15.0 × 26.5 B32653A3224+*** 2720
6.0 × 15.0 × 26.5 B32653A3334+*** 2720
7.0 × 16.0 × 26.5 B32653A3474+*** 2320
8.5 × 16.5 × 26.5 B32653A3684+*** 1920
10.5 × 16.5 × 26.5 B32653A3105+*** 1560
10.5 × 18.5 × 26.5 B32653A3125+*** 1560
11.0 × 20.5 × 26.5 B32653A3155+*** 1480
14.5 × 29.5 × 26.5 B32653A3225+000 ꢀ
14.5 × 29.5 × 26.5 B32653A3335+000 ꢀ
6.0 × 15.0 × 26.5 B32653A4154+*** 2720
6.0 × 15.0 × 26.5 B32653A4224+*** 2720
7.0 × 16.0 × 26.5 B32653A4334+*** 2320
8.5 × 16.5 × 26.5 B32653A4474+*** 1920
10.5 × 16.5 × 26.5 B32653A4684+*** 1560
11.0 × 20.5 × 26.5 B32653A4105+*** 1480
12.0 × 22.0 × 26.5 B32653A4125+000 ꢀ
14.5 × 29.5 × 26.5 B32653A4155+000 ꢀ
14.5 × 29.5 × 26.5 B32653A4225+000 ꢀ
6.0 × 15.0 × 26.5 B32653A6104+*** 2720
6.0 × 15.0 × 26.5 B32653A6154+*** 2720
8.5 × 16.5 × 26.5 B32653A6224+*** 1920
10.5 × 16.5 × 26.5 B32653A6334+*** 1560
11.0 × 20.5 × 26.5 B32653A6474+*** 1480
11.0 × 20.5 × 26.5 B32653A6564+*** 1480
14.5 × 29.5 × 26.5 B32653A6684+000 ꢀ
14.5 × 29.5 × 26.5 B32653A6105+000 ꢀ
14.5 × 29.5 × 26.5 B32653A6125+000 ꢀ
2800
2800
2400
2000
1600
1600
1400
ꢀ
2880
2880
2520
2040
2160
2160
2040
1040
1040
2880
2880
2520
2040
2160
2040
1800
1040
1040
2880
2880
2040
2160
2040
2040
1040
1040
1040
680
1000
1200
1500
2200
3300
150
220
330
470
680
1000
1200
1500
2200
100
150
220
330
470
ꢀ
400 200
2800
2800
2400
2000
1600
1400
ꢀ
ꢀ
ꢀ
630 250
2800
2800
2000
1600
1400
1400
ꢀ
560
680
1000
1200
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 61
B32653
High pulse (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
Ammo
pack pcs./
MOQ
V DC V AC
nF
1000 250
33
47
68
100
150
220
330
470
560
22
33
47
68
100
120
150
220
6.0 × 15.0 × 26.5 B32653A0333+*** 2720
6.0 × 15.0 × 26.5 B32653A0473+*** 2720
6.0 × 15.0 × 26.5 B32653A0683+*** 2720
8.5 × 16.5 × 26.5 B32653A0104+*** 1920
10.5 × 16.5 × 26.5 B32653A0154+*** 1560
11.0 × 20.5 × 26.5 B32653A0224+*** 1480
14.5 × 29.5 × 26.5 B32653A0334+000 ꢀ
14.5 × 29.5 × 26.5 B32653A0474+000 ꢀ
14.5 × 29.5 × 26.5 B32653A0564+000 ꢀ
6.0 × 15.0 × 26.5 B32653A7223+*** 2720
6.0 × 15.0 × 26.5 B32653A7333+*** 2720
8.5 × 16.5 × 26.5 B32653A7473+*** 1920
10.5 × 16.5 × 26.5 B32653A7683+*** 1560
11.0 × 20.5 × 26.5 B32653A7104+*** 1480
12.0 × 22.0 × 26.5 B32653A7124+000 ꢀ
14.5 × 29.5 × 26.5 B32653A7154+000 ꢀ
14.5 × 29.5 × 26.5 B32653A7224+000 ꢀ
2800
2800
2800
2000
1600
1400
ꢀ
2880
2880
2880
2040
2160
2040
2160
2160
2160
2880
2880
2040
2160
2040
1800
1040
1040
2880
2880
2520
2040
2160
2040
1800
1040
1040
1040
ꢀ
ꢀ
1250 500
2800
2800
2000
1600
1400
ꢀ
ꢀ
ꢀ
1600 500
6.8 6.0 × 15.0 × 26.5 B32653A1682+*** 2720
10
15
22
33
47
56
68
82
2800
2800
2400
2000
1600
1400
ꢀ
6.0 × 15.0 × 26.5 B32653A1103+*** 2720
7.0 × 16.0 × 26.5 B32653A1153+*** 2320
8.5 × 16.5 × 26.5 B32653A1223+*** 1920
10.5 × 16.5 × 26.5 B32653A1333+*** 1560
11.0 × 20.5 × 26.5 B32653A1473+*** 1480
12.0 × 22.0 × 26.5 B32653A1563+000 ꢀ
14.5 × 29.5 × 26.5 B32653A1683+000 ꢀ
14.5 × 29.5 × 26.5 B32653A1823+000 ꢀ
14.5 × 29.5 × 26.5 B32653A1104+000 ꢀ
ꢀ
ꢀ
100
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 61
B32653
High pulse (wound)
Ordering codes and packing units (lead spacing 22.5 mm)
VR
VRMS
f ≤1 kHz
CR
nF
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
Ammo
pack pcs./
MOQ
V DC V AC
2000 700
3.3 6.0 × 15.0 × 26.5 B32653A2332+*** 2720
4.7 6.0 × 15.0 × 26.5 B32653A2472+*** 2720
6.8 8.5 × 16.5 × 26.5 B32653A2682+*** 1920
2800
2800
2000
1600
1400
ꢀ
2880
2880
2040
2160
2040
2160
2160
2880
2880
2040
2160
2160
1800
2160
2160
10
10.5 × 16.5 × 26.5 B32653A2103+*** 1560
11.0 × 20.5 × 26.5 B32653A2153+*** 1480
14.5 × 29.5 × 26.5 B32653A2223+000 ꢀ
14.5 × 29.5 × 26.5 B32653A2333+000 ꢀ
15
22
33
ꢀ
2000 1000
2.2 6.0 × 15.0 × 26.5 B32653A8222+*** 2720
3.3 6.0 × 15.0 × 26.5 B32653A8332+*** 2720
4.7 8.5 × 16.5 × 26.5 B32653A8472+*** 1920
6.8 10.5 × 16.5 × 26.5 B32653A8682+*** 1560
2800
2800
2000
1600
1600
ꢀ
10
10.5 × 20.5 × 26.5 B32653A8103+*** 1560
12.0 × 22.0 × 26.5 B32653A8123+000 ꢀ
14.5 × 29.5 × 26.5 B32653A8153+000 ꢀ
14.5 × 29.5 × 26.5 B32653A8223+000 ꢀ
12
15
22
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = 10%
J = 5%
289 = Straight terminals, Ammo pack
189 = Straight terminals, Reel
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 61
B32654
High pulse (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions Ordering code
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
Ammo
pack pcs./
MOQ
w × h × l
(composition see
below)
V DC V AC
nF
mm
250 160
1500 11.0 × 21.0 × 31.5 B32654A3155+***
2200 12.5 × 21.5 × 31.5 B32654A3225+***
ꢀ
ꢀ
1400
1200
ꢀ
1280
1120
960
800
720
3300 15.0 × 24.5 × 31.5 B32654A3335+000 ꢀ
4700 18.0 × 27.5 × 31.5 B32654A3475+000 ꢀ
5600 19.0 × 30.0 × 31.5 B32654A3565+000 ꢀ
6800 22.0 × 36.5 × 31.5 B32654A3685+000 ꢀ
8200 22.0 × 36.5 × 31.5 B32654A3825+000 ꢀ
ꢀ
ꢀ
ꢀ
640
640
ꢀ
400 200
630 250
1000 250
1000 11.0 × 21.0 × 31.5 B32654A4105+***
1500 12.5 × 21.5 × 31.5 B32654A4155+***
2200 14.0 × 24.5 × 31.5 B32654A4225+***
3300 19.0 × 30.0 × 31.5 B32654A4335+000 ꢀ
4700 22.0 × 36.5 × 31.5 B32654A4475+000 ꢀ
5600 22.0 × 36.5 × 31.5 B32654A4565+000 ꢀ
680 11.0 × 21.0 × 31.5 B32654A6684+***
1000 13.5 × 23.0 × 31.5 B32654A6105+***
1500 18.0 × 27.5 × 31.5 B32654A6155+000 ꢀ
2200 18.0 × 33.0 × 31.5 B32654A6225+000 ꢀ
2700 22.0 × 36.5 × 31.5 B32654A6275+000 ꢀ
3300 22.0 × 36.5 × 31.5 B32654A6335K000 ꢀ
220 11.0 × 21.0 × 31.5 B32654A0224+***
330 11.0 × 21.0 × 31.5 B32654A0334+***
470 14.0 × 24.5 × 31.5 B32654A0474+***
680 18.0 × 27.5 × 31.5 B32654A0684+000 ꢀ
820 19.0 × 30.0 × 31.5 B32654A0824+000 ꢀ
1000 21.0 × 31.0 × 31.5 B32654A0105+000 ꢀ
1200 22.0 × 36.5 × 31.5 B32654A0125+000 ꢀ
1500 22.0 × 36.5 × 31.5 B32654A0155K000 ꢀ
ꢀ
ꢀ
ꢀ
1400
1200
1000
ꢀ
1280
1120
1040
720
640
640
1280
1040
800
800
640
ꢀ
ꢀ
ꢀ
ꢀ
1400
1000
ꢀ
ꢀ
ꢀ
ꢀ
640
ꢀ
ꢀ
ꢀ
1400
1400
1000
ꢀ
1280
1280
1040
800
720
720
ꢀ
ꢀ
ꢀ
640
640
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
189 = Straight terminals, Reel
K = 10%
J = 5%
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 61
B32654
High pulse (wound)
Ordering codes and packing units (lead spacing 27.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions Ordering code
Reel
pcs./
MOQ
Untaped
pcs./
MOQ
Ammo
pack pcs./
MOQ
w × h × l
(composition see
below)
V DC V AC
nF
mm
1250 500
100 11.0 × 21.0 × 31.5 B32654A7104+***
150 11.0 × 21.0 × 31.5 B32654A7154+***
220 14.0 × 24.5 × 31.5 B32654A7224+***
330 18.0 × 27.5 × 31.5 B32654A7334+000 ꢀ
470 21.0 × 31.0 × 31.5 B32654A7474+000 ꢀ
560 22.0 × 36.5 × 31.5 B32654A7564+000 ꢀ
680 22.0 × 36.5 × 31.5 B32654A7684+000 ꢀ
ꢀ
ꢀ
ꢀ
1400
1400
1000
ꢀ
1280
1280
1040
800
720
640
ꢀ
ꢀ
ꢀ
640
1600 500
2000 700
47 11.0 × 21.0 × 31.5 B32654A1473+***
68 11.0 × 21.0 × 31.5 B32654A1683+***
100 14.0 × 24.5 × 31.5 B32654A1104+***
150 18.0 × 27.5 × 31.5 B32654A1154+000 ꢀ
220 21.0 × 31.0 × 31.5 B32654A1224+000 ꢀ
22 11.0 × 21.0 × 31.5 B32654A2223+***
33 13.5 × 23.0 × 31.5 B32654A2333+***
47 18.0 × 27.5 × 31.5 B32654A2473+000 ꢀ
68 19.0 × 30.0 × 31.5 B32654A2683+000 ꢀ
82 22.0 × 36.5 × 31.5 B32654A2823+000 ꢀ
100 22.0 × 36.5 × 31.5 B32654A2104+000 ꢀ
ꢀ
ꢀ
ꢀ
1400
1400
1000
ꢀ
1280
1280
1040
800
ꢀ
784
ꢀ
ꢀ
1400
1000
ꢀ
1280
1040
800
720
640
ꢀ
ꢀ
ꢀ
640
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
189 = Straight terminals, Reel
K = 10%
J = 5%
000 = Straight terminals, Untaped (standard lead
length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
P1
Ordering code
(composition see
mm below)
Untaped
V DC V AC
nF
pcs./MOQ
250 160
2700 12.0 × 22.0 × 42.0
3000 12.0 × 22.0 × 42.0
3300 14.0 × 25.0 × 42.0
4000 14.0 × 25.0 × 42.0
4000 24.0 × 15.0 × 42.0
4700 16.0 × 28.5 × 42.0
5600 16.0 × 28.5 × 42.0
5600 24.0 × 19.0 × 42.0
6800 18.0 × 32.5 × 42.0
8000 18.0 × 32.5 × 42.0
10000 20.0 × 39.5 × 42.0 10.2 B32656G3106+000
10000 20.0 × 39.5 × 42.0 B32656A3106+000
12000 20.0 × 39.5 × 42.0 10.2 B32656G3126K000
12000 20.0 × 39.5 × 42.0 B32656A3126K000
15000 28.0 × 37.0 × 42.0 10.2 B32656G3156K000
15000 28.0 × 37.0 × 42.0 B32656A3156K000
17000 28.0 × 42.5 × 42.0 10.2 B32656G3176+000
17000 28.0 × 42.5 × 42.0 B32656A3176+000
20000 30.0 × 45.0 × 42.0 20.3 B32656G3206+000
20000 30.0 × 45.0 × 42.0 B32656A3206+000
24000 33.0 × 48.0 × 42.0 20.3 B32656G3246+000
24000 33.0 × 48.0 × 42.0 B32656A3246+000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A3275+000 1620
B32656A3305+000 1620
B32656A3335+000 1380
B32656A3405+000 1380
B32656T3405+000 1040
B32656A3475+000
B32656A3565+000
B32656T3565+000
B32656A3685+000
B32656A3805+000
800
800
780
720
720
640
640
640
640
440
440
440
440
400
400
180
180
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
Untaped
V DC V AC
nF
mm
mm below)
pcs./MOQ
400 200
2000 12.0 × 22.0 × 42.0
2700 14.0 × 25.0 × 42.0
2700 24.0 × 15.0 × 42.0
3500 24.0 × 19.0 × 42.0
4000 16.0 × 28.5 × 42.0
5600 18.0 × 32.5 × 42.0
7500 20.0 × 39.5 × 42.0 10.2 B32656G4755+000
7500 20.0 × 39.5 × 42.0 B32656A4755+000
10000 28.0 × 37.0 × 42.0 10.2 B32656G4106+000
10000 28.0 × 37.0 × 42.0 B32656A4106+000
12000 28.0 × 42.5 × 42.0 10.2 B32656G4126+000
12000 28.0 × 42.5 × 42.0 B32656A4126+000
14000 30.0 × 45.0 × 42.0 20.3 B32656G4146+000
14000 30.0 × 45.0 × 42.0 B32656A4146+000
17000 33.0 × 48.0 × 42.0 20.3 B32656G4176+000
17000 33.0 × 48.0 × 42.0
1000 12.0 × 22.0 × 42.0
1500 14.0 × 25.0 × 42.0
1500 24.0 × 15.0 × 42.0
2200 16.0 × 28.5 × 42.0
2200 24.0 × 19.0 × 42.0
3000 18.0 × 32.5 × 42.0
4000 20.0 × 39.5 × 42.0 10.2 B32656G6405+000
4000 20.0 × 39.5 × 42.0 B32656A6405+000
5600 28.0 × 37.0 × 42.0 10.2 B32656G6565+000
5600 28.0 × 37.0 × 42.0 B32656A6565+000
7000 28.0 × 42.5 × 42.0 10.2 B32656G6705K000
7000 28.0 × 42.5 × 42.0 B32656A6705K000
8000 30.0 × 45.0 × 42.0 20.3 B32656G6805+000
8000 30.0 × 45.0 × 42.0 B32656A6805+000
10000 33.0 × 48.0 × 42.0 20.3 B32656G6106K000
10000 33.0 × 48.0 × 42.0 B32656A6106K000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A4205+000 1620
B32656A4275+000 1380
B32656T4275+000 1040
B32656T4355+000
B32656A4405+000
B32656A4565+000
780
800
720
640
640
440
440
440
440
400
400
180
180
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A4176+000
630 250
B32656A6105+000 1620
B32656A6155+000 1380
B32656T6155+000 1040
B32656A6225+000
B32656T6225+000
B32656A6305+000
800
780
720
640
640
440
440
440
440
400
400
180
180
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
P1
Ordering code
(composition see
mm below)
Untaped
V DC V AC
nF
pcs./MOQ
750 350
470 12.0 × 22.0 × 42.0
560 12.0 × 22.0 × 42.0
680 12.0 × 22.0 × 42.0
820 14.0 × 25.0 × 42.0
1000 16.0 × 28.5 × 42.0
1000 24.0 × 15.0 × 42.0
1200 16.0 × 28.5 × 42.0
1200 24.0 × 19.0 × 42.0
1500 18.0 × 32.5 × 42.0
1800 18.0 × 32.5 × 42.0
2200 20.0 × 39.5 × 42.0 10.2 B32656G5225+000
2200 20.0 × 39.5 × 42.0 B32656A5225+000
2500 20.0 × 39.5 × 42.0 10.2 B32656G5255+000
2500 20.0 × 39.5 × 42.0 B32656A5255+000
2700 28.0 × 37.0 × 42.0 10.2 B32656G5275+000
2700 28.0 × 37.0 × 42.0 B32656A5275+000
3300 28.0 × 37.0 × 42.0 10.2 B32656G5335+000
3300 28.0 × 37.0 × 42.0 B32656A5335+000
4000 28.0 × 42.5 × 42.0 10.2 B32656G5405+000
4000 28.0 × 42.5 × 42.0 B32656A5405+000
4700 30.0 × 45.0 × 42.0 20.3 B32656G5475+000
4700 30.0 × 45.0 × 42.0 B32656A5475+000
5600 33.0 × 48.0 × 42.0 20.3 B32656G5565+000
5600 33.0 × 48.0 × 42.0 B32656A5565+000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A5474+000 1620
B32656A5564+000 1620
B32656A5684+000 1620
B32656A5824+000 1380
B32656A5105+000
800
B32656T5105K000 1040
B32656A5125+000
B32656T5125+000
B32656A5155+000
B32656A5185+000
800
780
720
720
640
640
640
640
440
440
440
440
440
440
400
400
180
180
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
Untaped
V DC V AC
nF
mm
mm below)
pcs./MOQ
850 450
220
330
470
680
680
12.0 × 22.0 × 42.0
12.0 × 22.0 × 42.0
12.0 × 22.0 × 42.0
16.0 × 28.5 × 42.0
24.0 × 15.0 × 42.0
24.0 × 19.0 × 42.0
18.0 × 32.5 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0 10.2 B32656G8155+000
20.0 × 39.5 × 42.0 B32656A8155+000
20.0 × 39.5 × 42.0 10.2 B32656G8185+000
20.0 × 39.5 × 42.0 B32656A8185+000
28.0 × 37.0 × 42.0 10.2 B32656G8225+000
28.0 × 37.0 × 42.0 B32656A8225+000
28.0 × 42.5 × 42.0 10.2 B32656G8255+000
28.0 × 42.5 × 42.0 B32656A8255+000
30.0 × 45.0 × 42.0 20.3 B32656G8275+000
30.0 × 45.0 × 42.0 B32656A8275+000
30.0 × 45.0 × 42.0 20.3 B32656G8305+000
30.0 × 45.0 × 42.0 B32656A8305+000
33.0 × 48.0 × 42.0 20.3 B32656G8335+000
33.0 × 48.0 × 42.0 B32656A8335+000
33.0 × 48.0 × 42.0 20.3 B32656G8385+000
33.0 × 48.0 × 42.0 B32656A8385+000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A8224+000 1620
B32656A8334+000 1620
B32656A8474+000 1620
B32656A8684+000 800
B32656T8684+000 1040
820
B32656T8824+000
B32656A8105+000
B32656A8125+000
780
720
720
640
640
640
640
440
440
440
440
400
400
400
400
180
180
180
180
1000
1200
1500
1500
1800
1800
2200
2200
2500
2500
2700
2700
3000
3000
3300
3300
3800
3800
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
P1
Ordering code
(composition see
mm below)
Untaped
V DC V AC
nF
pcs./MOQ
1000 500
330
470
470
680
680
1000
1000
1200
1200
1500
1500
2200
2200
2700
2700
2700
2700
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
24.0 × 15.0 × 42.0
16.0 × 28.5 × 42.0
24.0 × 19.0 × 42.0
20.0 × 39.5 × 42.0 10.2 B32656G0105+000
20.0 × 39.5 × 42.0 B32656A0105+000
28.0 × 37.0 × 42.0 10.2 B32656G0125+000
28.0 × 37.0 × 42.0 B32656A0125+000
28.0 × 37.0 × 42.0 10.2 B32656G0155+000
28.0 × 37.0 × 42.0 B32656A0155+000
30.0 × 45.0 × 42.0 20.3 B32656G0225+000
30.0 × 45.0 × 42.0 B32656A0225+000
30.0 × 45.0 × 42.0 20.3 B32656G0275M000
30.0 × 45.0 × 42.0 B32656A0275M000
33.0 × 48.0 × 42.0 20.3 B32656G0275+000
33.0 × 48.0 × 42.0 B32656A0275+000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A0334+000 1620
B32656A0474+000 1380
B32656T0474+000 1040
B32656A0684+000
B32656T0684+000
800
780
640
640
440
440
440
440
400
400
400
400
180
180
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
Untaped
V DC V AC
nF
mm
mm below)
pcs./MOQ
1250 500
150
220
270
330
390
470
680
680
820
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
24.0 × 15.0 × 42.0
16.0 × 28.5 × 42.0
24.0 × 19.0 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0 10.2 B32656G7684+000
20.0 × 39.5 × 42.0 B32656A7684+000
28.0 × 37.0 × 42.0 10.2 B32656G7824+000
28.0 × 37.0 × 42.0 B32656A7824+000
28.0 × 37.0 × 42.0 10.2 B32656G7105+000
28.0 × 37.0 × 42.0 B32656A7105+000
28.0 × 42.5 × 42.0 10.2 B32656G7125+000
28.0 × 42.5 × 42.0 B32656A7125+000
30.0 × 45.0 × 42.0 20.3 B32656G7155+000
30.0 × 45.0 × 42.0 B32656A7155+000
33.0 × 48.0 × 42.0 20.3 B32656G7185K000
33.0 × 48.0 × 42.0 B32656A7185K000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656A7154+000 1620
B32656A7224+000 1380
B32656T7274+000 1040
B32656A7334+000
B32656T7394+000
B32656A7474+000
800
780
720
640
640
440
440
440
440
440
440
400
400
180
180
ꢀ
820
ꢀ
1000
1000
1200
1200
1500
1500
1800
1800
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 61
B32656
High pulse (wound)
Ordering codes and packing units (lead spacing 37.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
mm
P1
Ordering code
(composition see
mm below)
Untaped
V DC V AC
nF
pcs./MOQ
1600 600
100
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
24.0 × 15.0 × 42.0
16.0 × 28.5 × 42.0
24.0 × 19.0 × 42.0
20.0 × 39.5 × 42.0 10.2 B32656G1334+000
20.0 × 39.5 × 42.0 B32656J1334+000
28.0 × 37.0 × 42.0 10.2 B32656G1474+000
28.0 × 37.0 × 42.0 B32656J1474+000
28.0 × 37.0 × 42.0 10.2 B32656G1564+000
28.0 × 37.0 × 42.0 B32656J1564+000
28.0 × 42.5 × 42.0 10.2 B32656G1684+000
28.0 × 42.5 × 42.0 B32656J1684+000
30.0 × 45.0 × 42.0 20.3 B32656G1824+000
30.0 × 45.0 × 42.0 B32656J1824+000
33.0 × 48.0 × 42.0 20.3 B32656G1905+000
33.0 × 48.0 × 42.0
12.0 × 22.0 × 42.0
14.0 × 25.0 × 42.0
24.0 × 15.0 × 42.0
24.0 × 19.0 × 42.0
18.0 × 32.5 × 42.0
20.0 × 39.5 × 42.0 10.2 B32656G2224+000
20.0 × 39.5 × 42.0 B32656J2224+000
28.0 × 37.0 × 42.0 10.2 B32656G2334+000
28.0 × 37.0 × 42.0 B32656J2334+000
30.0 × 45.0 × 42.0 20.3 B32656G2474+000
30.0 × 45.0 × 42.0 B32656J2474+000
33.0 × 48.0 × 42.0 20.3 B32656G2564+000
33.0 × 48.0 × 42.0 B32656J2564+000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656J1104+000
B32656J1154+000
B32656T1154+000 1040
B32656J1224+000
B32656T1224+000
1620
1380
150
150
220
220
330
330
470
470
560
560
680
680
820
820
900
900
68
100
100
120
150
220
220
330
330
470
470
560
560
800
780
640
640
440
440
440
440
440
440
400
400
180
180
1620
1380
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32656J1905+000
B32656J2683+000
B32656J2104+000
B32656T2104+000 1040
B32656T2124+000
B32656J2154+000
2000 700
780
720
640
640
440
440
400
400
180
180
ꢀ
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 61
B32658
High pulse (wound)
Ordering codes and packing units (lead spacing 52.5 mm)
VR
VRMS
f ≤1 kHz
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
Untaped
V DC V AC
nF
mm
mm below)
pcs./MOQ
250 160
30000 30.0 × 45.0 × 57.5 20.3 B32658G3306+000 280
40000 35.0 × 50.0 × 57.5 20.3 B32658G3406K000 108
20000 30.0 × 45.0 × 57.5 20.3 B32658G4206+000 280
26000 35.0 × 50.0 × 57.5 20.3 B32658G4266+000 108
12000 30.0 × 45.0 × 57.5 20.3 B32658G6126K000 280
15000 35.0 × 50.0 × 57.5 20.3 B32658G6156+000 108
6800 30.0 × 45.0 × 57.5 20.3 B32658G5685+000 280
9000 35.0 × 50.0 × 57.5 20.3 B32658G5905+000 108
4700 30.0 × 45.0 × 57.5 20.3 B32658G8475+000 280
5600 35.0 × 50.0 × 57.5 20.3 B32658G8565+000 108
6000 35.0 × 50.0 × 57.5 20.3 B32658G8605+000 108
3300 30.0 × 45.0 × 57.5 20.3 B32658G0335+000 280
4500 35.0 × 50.0 × 57.5 20.3 B32658G0455+000 108
2000 30.0 × 45.0 × 57.5 20.3 B32658G7205+000 280
2200 35.0 × 50.0 × 57.5 20.3 B32658G7225+000 108
2700 35.0 × 50.0 × 57.5 20.3 B32658G7275+000 108
1000 30.0 × 45.0 × 57.5 20.3 B32658G1105+000 280
1200 30.0 × 45.0 × 57.5 20.3 B32658G1125K000 280
1500 35.0 × 50.0 × 57.5 20.3 B32658G1155+000 108
680 30.0 × 45.0 × 57.5 20.3 B32658G2684+000 280
820 35.0 × 50.0 × 57.5 20.3 B32658G2824+000 108
1000 35.0 × 50.0 × 57.5 20.3 B32658G2105K000 108
400 200
630 250
750 350
850 450
1000 500
1250 500
1600 600
2000 700
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = 10%
J = 5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 61
B32651 ... B32658
High pulse (wound)
Technical data
Reference standard: IEC 60384-16:2005 and AEC-Q200D. All data given at T = 20 °C, unless
otherwise specified.
Operating temperature range Max. operating temperature Top,max
Upper category temperature Tmax
+110 °C
+100 °C
Lower category temperature Tmin
ꢀ55 °C
+85 °C
Rated temperature TR
Dissipation factor tan δ (in 10-3)
at 20 °C (upper limit values)
at
≤27 nF 27 nF<CR≤0.1 μF 0.1 μF<CR≤1 μF CR >1 μF
1 kHz 0.8
0.8
0.8
1.0
ꢀ
0.8
ꢀ
10 kHz 1.0
100 kHz 2.0
CR ≤ 0.33 μF
100 GΩ
1.0
3.0
ꢀ
CR > 0.33 μF
30000 s
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
1.6 ꢁ VR, 2 s
Capacitance tolerance codes J = 5%
K = 10%
M = 20%
Category voltage VC
(continuous operation with
Top (°C)
Top ≤ 85
DC voltage derating
VC = VR
AC voltage derating
VC,RMS=VRMS
VDC or VAC at f ≤ 1 kHz)
85<Top≤100 VC = VR ꢁ (165ꢀTop)/80 VC,RMS=VRMS ꢁ (165ꢀTop)/80
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤ 1 kHz)
Top (°C)
Top ≤ 85
DC voltage (max. hours) AC voltage (max. hours)
Vop = 1.25 ꢁ VC (2000 h) Vop = 1.0 ꢁ VC,RMS (2000 h)
85<Top≤100 Vop = 1.25 ꢁ VC (1000 h) Vop = 1.0 ꢁ VC,RMS (1000 h)
1000 h / 40 °C / 93% relative humidity with VR,DC
Biased humidity
Limit values after biased
humidity test
Capacitance change ꢂΔC/Cꢂ
Dissipation factor change Δ tan δ
Insulation resistance Rins
≤ 5%
≤ 2.0 ꢁ 10-3 (at 1 kHz)
≥ 50% of minimum
as-delivered values
or time constant τ = CR ꢁ Rins
1 fit (≤ 1 ꢁ 10-9/h) at 0.5 ꢁ VR, 40 °C
200 000 h at 1.0 ꢁ VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Reliability:
Failure rate λ
Service life tSL
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change ꢂΔC/Cꢂ
Dissipation factor tan δ
Insulation resistance Rins
or time constant τ = CR ꢁ Rins
> 10%
> 4 ꢁ upper limit value
< 1500 MΩ (CR ≤ 0.33 μF)
< 500 s (CR > 0.33 μF)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 61
B32651 ... B32658
High pulse (wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/μs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/μs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing
10 mm
15 mm
22.5 mm
27.5 mm
37.5 mm
52.5 mm
VR
VRMS
V DC
250
400
630
750
850
1000
V AC
160
200
250
350
450
250
500
450
500
500
600
700
700
1000
dV/dt in V/μs
ꢀ
200
300
400
ꢀ
120
180
300
ꢀ
50
100
150
ꢀ
36
55
24
36
ꢀ
ꢀ
80
50
ꢀ
250
340
ꢀ
160
220
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
975
ꢀ
600
ꢀ
300
ꢀ
ꢀ
400
ꢀ
265
ꢀ
1250
1600
4000
ꢀ
ꢀ
ꢀ
ꢀ
1850
4500
ꢀ
1150
2400
ꢀ
600
1000
ꢀ
500
ꢀ
350
ꢀ
ꢀ
ꢀ
600
ꢀ
400
ꢀ
ꢀ
5200
8000
ꢀ
ꢀ
ꢀ
2000
ꢀ
7000
7500
2300
ꢀ
700
ꢀ
475
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 61
B32651 ... B32658
High pulse (wound)
k0 values
Lead spacing 10 mm
15 mm
22.5 mm
27.5 mm
37.5 mm
52.5 mm
VR
VRMS
V DC V AC k0 in V2/μs
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
250
400
160
200
250
350
450
250
500
450
500
500
600
700
700
1000
100 000
60 000
25 000
18 000
12 000
250 000
500 000
200 000
350 000
110 000
250 000
44 000
100 800
375 000
578 000
28 800
63 000
630
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
750
240 000
374 000
ꢀ
850
ꢀ
ꢀ
1000
3 000 000
1 500 000 1 000 000
ꢀ
ꢀ
ꢀ
ꢀ
800 000
530 000
ꢀ
ꢀ
ꢀ
ꢀ
1250
1600
25 000 000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
9 000 000
3 750 000 2 000 000 1 250 000
875 000
ꢀ
ꢀ
20 000 000 10 000 000 4 000 000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1 920 000 1 280 000
ꢀ
ꢀ
28 000 000
2000
60 000 000 40 000 000 15 000 000 2 800 000 1 900 000
ꢀ
ꢀ
ꢀ
ꢀ
50 000 000
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 61
B32651
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
1250 V DC/450 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 61
B32652
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
250 V DC/160 V AC
400 V DC/200 V AC
630 V DC/250 V AC
1000 V DC/250 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 61
B32652
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
1250 V DC/500 V AC
1600 V DC/500 V AC
1600 V DC/700 V AC
2000 V DC/700 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 34 of 61
B32653
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
250 V DC/160 V AC
400 V DC/200 V AC
630 V DC/250 V AC
1000 V DC/250 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 35 of 61
B32653
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 22.5 mm
1250 V DC/500 V AC
1600 V DC/500 V AC
2000 V DC/700 V AC
2000 V DC/1000 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 36 of 61
B32654
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
250 V DC/160 V AC
400 V DC/200 V AC
630 V DC/250 V AC
1000 V DC/250 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 37 of 61
B32654
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 27.5 mm
1250 V DC/500 V AC
1600 V DC/500 V AC
2000 V DC/700 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 38 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
250 V DC/160 V AC
250 V DC/160 V AC
250 V DC/160 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 39 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
400 V DC/200 V AC
400 V DC/200 V AC
400 V DC/200 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 40 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
630 V DC/250 V AC
630 V DC/250 V AC
630 V DC/250 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 41 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
750 V DC/350 V AC
750 V DC/350 V AC
750 V DC/350 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 42 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
850 V DC/450 V AC
850 V DC/450 V AC
850 V DC/450 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 43 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
1000 V DC/500 V AC
1000 V DC/500 V AC
1000 V DC/500 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 44 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
1250 V DC/500 V AC
1250 V DC/500 V AC
1250 V DC/500 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 45 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
1600 V DC/600 V AC
1600 V DC/600 V AC
1600 V DC/600 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 46 of 61
B32656
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 37.5 mm
2000 V DC/700 V AC
2000 V DC/700 V AC
2000 V DC/700 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 47 of 61
B32658
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 52.5 mm
250 V DC/160 V AC
400 V DC/200 V AC
630 V DC/250 V AC
750 V DC/350 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 48 of 61
B32658
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 52.5 mm
850 V DC/450 V AC
1000 V DC/500 V AC
1250 V DC/500 V AC
1600 V DC/600 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 49 of 61
B32658
High pulse (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms, TA ≤90 °C)
For TA >90 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 52.5 mm
2000 V DC/700 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 50 of 61
B32651 ... B32658
High pulse (wound)
Mounting guidelines
1
Soldering
1.1
Solderability of leads
The solderability of terminal leads is tested to IEC 60068-2-20:2008, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2:2007, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature
is far higher than the upper category temperature of the capacitors, the terminal wires should be
cut off from the capacitor before the ageing procedure to prevent the solderability being impaired
by the products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 5 °C
2.0 0.5 s
Immersion depth
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Evaluation criteria:
Wetting of wire surface by new solder ≥90%,
free-flowing solder
Visual inspection
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20:2008, test Tb, method 1.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 5 °C
coated
10 1 s
uncoated (lead spacing >10 mm)
MFP
MKP (lead spacing >7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 1 s
(lead spacing ≤7.5 mm)
uncoated (lead spacing ≤10 mm)
insulated (B32559)
MKP
MKT
<4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 51 of 61
B32651 ... B32658
High pulse (wound)
Immersion depth
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Shield
Heat-absorbing board, (1.5 0.5) mm thick, between
capacitor body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
ΔC/C0
tan δ
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
Please read Cautions and warnings and
Important notes at the end of this document.
Page 52 of 61
B32651 ... B32658
High pulse (wound)
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommendations
As a reference, the recommended wave soldering profile for our film capacitors is as follows:
Please read Cautions and warnings and
Important notes at the end of this document.
Page 53 of 61
B32651 ... B32658
High pulse (wound)
Body temperature should follow the description below:
MKP capacitor
During pre-heating: Tp ≤110 °C
During soldering: Ts ≤120 °C, ts ≤45 s
MKT capacitor
During pre-heating: Tp ≤125 °C
During soldering: Ts ≤160 °C, ts ≤45 s
When SMD components are used together with leaded ones, the film capacitors should not pass
into the SMD adhesive curing oven. The leaded components should be assembled after the SMD
curing step.
Leaded film capacitors are not suitable for reflow soldering.
In order to ensure proper conditions for manual or selective soldering, the body temperature of
the capacitor (Ts) must be ≤120 °C.
One recommended condition for manual soldering is that the tip of the soldering iron should
be <360 °C and the soldering contact time should be no longer than 3 seconds.
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please refer to EPCOS Film Capacitor Data Book in case more details are needed.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 54 of 61
B32651 ... B32658
High pulse (wound)
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
Consult us if application is with severe temperature and humidity condition.
There are no serviceable or repairable parts inside the capacitor. Opening the capacitor or
any attempts to open or repair the capacitor will void the warranty and liability of EPCOS.
Please note that the standards referred to in this publication may have been revised in the
meantime.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage
Make sure that capacitors are stored within the specified 4.5
conditions
Flammability
range of time, temperature and humidity conditions.
Avoid external energy, such as fire or electricity (passive 5.3
"Storage conditions"
flammability), avoid overload of the capacitors (active
flammability) and consider the flammability of materials.
"Flammability"
Resistance to Do not exceed the tested ability to withstand vibration.
5.2
vibration
The capacitors are tested to IEC 60068-2-6:2007.
EPCOS offers film capacitors specially designed for
operation under more severe vibration regimes such as
those found in automotive applications. Consult our
catalog "Film Capacitors for Automotive Electronics".
"Resistance to
vibration"
Topic
Safety information
Reference chapter
"Mounting guidelines"
1 "Soldering"
Soldering
Cleaning
Do not exceed the specified time or temperature limits
during soldering.
Use only suitable solvents for cleaning capacitors.
2 "Cleaning"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 55 of 61
B32651 ... B32658
High pulse (wound)
Topic
Safety information
Reference chapter
"Mounting guidelines"
3 "Embedding of
Embedding of When embedding finished circuit assemblies in plastic
capacitors in
finished
resins, chemical and thermal influences must be taken capacitors in finished
into account.
assemblies"
assemblies
Caution: Consult us first, if you also wish to embed other
uncoated component types!
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the or-
dering codes are due to different processes employed and do not affect the specifications
of the respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 56 of 61
B32651 ... B32658
High pulse (wound)
Symbols and terms
Symbol
α
English
German
Wärmeübergangszahl
Heat transfer coefficient
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
C
Humidity coefficient of capacitance
Capacitance
CR
Rated capacitance
Nennkapazität
ΔC
ΔC/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
ΔC/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
Δt
Time interval
Zeitintervall
ΔT
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
Δtan δ
ΔV
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
ΔV/Δt
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 57 of 61
B32651 ... B32658
High pulse (wound)
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
k0
LS
λ
Pulse characteristic
Series inductance
Serieninduktivität
Failure rate
Ausfallrate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
R
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor Serienanteil des Verlustfaktors
Temperature of the air surrounding the Temperatur der Luft, die das Bauteil
component
umgibt
Tmax
Tmin
tOL
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature, TA + ΔT
Rated temperature
Beriebstemperatur, TA + ΔT
Nenntemperatur
Tref
tSL
Reference temperature
Reference service life
Referenztemperatur
Referenz-Lebensdauer
Please read Cautions and warnings and
Important notes at the end of this document.
Page 58 of 61
B32651 ... B32658
High pulse (wound)
Symbol
VAC
English
German
AC voltage
Wechselspannung
VC
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Vo
Output voltage
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
(Sinusförmige) Wechselspannung
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 59 of 61
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 60 of 61
Important notes
7. Our manufacturing sites serving the automotive business apply the IATF 16949
standard. The IATF certifications confirm our compliance with requirements regarding the
quality management system in the automotive industry. Referring to customer requirements
and customer specific requirements (“CSR”) TDK always has and will continue to have the
policy of respecting individual agreements. Even if IATF 16949 may appear to support the
acceptance of unilateral requirements, we hereby like to emphasize that only requirements
mutually agreed upon can and will be implemented in our Quality Management System.
For clarification purposes we like to point out that obligations from IATF 16949 shall only
become legally binding if individually agreed upon.
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP,
CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine,
PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other coun-
tries. Further information will be found on the Internet at www.epcos.com/trademarks.
Release 2018-06
Page 61 of 61
相关型号:
B32653A2682J189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A2682J289
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A2682K189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A2682K289
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0068uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A3105J189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250V, 1uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A3105K189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250V, 1uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A3224J000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250V, 0.22uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32653A3224K000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 250V, 0.22uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
©2020 ICPDF网 联系我们和版权申明