B32672L8392189 [EPCOS]
Film Capacitors Metallized Polypropylene Film Capacitors (MKP); 薄膜电容器金属化聚丙烯薄膜电容器( MKP )型号: | B32672L8392189 |
厂家: | EPCOS |
描述: | Film Capacitors Metallized Polypropylene Film Capacitors (MKP) |
文件: | 总30页 (文件大小:570K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polypropylene Film Capacitors (MKP)
Series/Type:
B32671L ... B32672L
Date:
December 2012
© EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Metallized polypropylene film capacitors (MKP)
High V AC, high temperature (wound)
B32671L ... B32672L
Typical applications
Electronic ballasts (resonant circuits)
SMPS
Dimensional drawing
High-frequency AC loads
Pulse circuits
Climatic
Max. operating temperature: 125 °C
Climatic category (IEC 60068-1): 55/110/56
Construction
Dielectric: metallized polypropylene (PP)
Wound capacitor technology
Plastic case (UL 94 V-0)
Epoxy resin sealing
Dimensions in mm
Lead spacing Lead diameter Type
±0.4
d1
Features
Very high AC voltages for all frequency
ranges
10
15
0.6
0.8
B32671L
B32672L
Very small dimensions
High peak voltage for short time periods
High peak current
High pulse withstand capability
RoHS-compatible
Halogen-free capacitors available on request
Terminals
Parallel wire leads, lead-free tinned
Special lead lengths available on request
Marking
Manufacturer's logo
lot number, series number
Rated capacitance (coded)
Capacitance tolerance (code letter)
Rated AC voltage
Date of manufacture (coded)
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping, refer to chapter "Taping and packing“.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Overview of available types
Lead spacing 10 mm
15 mm
B32672L
6
Type
Page
B32671L
4
VRMS (V AC) 200 250 250 500 600 700 160 200 250 250 500 600 700 900
VR (V DC)
CR (nF)
0.68
1.0
400 630 1000 1000 1600 2000 250 420 630 1000 1300 1600 2000 2000
1.2
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.2
6.8
8.2
10
12
15
22
33
47
56
68
100
150
220
330
390
470
680
1000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 30
B32671L
High V AC, high temperature (wound)
Ordering codes and packing units (lead spacing 10 mm)
VRMS
f ≤1 kHz
V AC
VR
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
V DC nF
200
250
250
500
400
630
22
33
47
68
100
15
22
33
47
56
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
6.0 × 12.0 × 13.0
B32671L4223+*** 4000
B32671L4333+*** 4000
B32671L4473+*** 3320
B32671L4683+*** 3320
B32671L4104+*** 2720
B32671L6153+*** 4000
B32671L6223+*** 3320
B32671L6333+*** 3320
B32671L6473+*** 2720
B32671L6563+*** 2720
B32671L9472+*** 4000
B32671L9682+*** 4000
B32671L9103+*** 3320
B32671L9153+*** 3320
B32671L9223+*** 2720
B32671L0332+*** 4000
B32671L0392+*** 4000
B32671L0472+*** 4000
B32671L0562+*** 3320
B32671L0622+*** 3320
B32671L0682+*** 3320
B32671L0822+*** 3320
B32671L0103+*** 2720
B32671L0123+*** 2720
6800
6800
5200
5200
4400
6800
5200
5200
4400
4400
6800
6800
5200
5200
4400
6800
6800
6800
5200
5200
5200
5200
4400
4400
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
1000
1000
4.7 4.0 × 9.0 × 13.0
6.8 4.0 × 9.0 × 13.0
10
15
22
3.3 4.0 × 9.0 × 13.0
3.9 4.0 × 9.0 × 13.0
4.7 4.0 × 9.0 × 13.0
5.6 5.0 × 11.0 × 13.0
6.2 5.0 × 11.0 × 13.0
6.8 5.0 × 11.0 × 13.0
8.2 6.0 × 12.0 × 13.0
5.0 × 11.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
10
12
6.0 × 12.0 × 13.0
6.0 × 12.0 × 13.0
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series, intermediate capacitance values and closer tolerances on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 30
B32671L
High V AC, high temperature (wound)
Ordering codes and packing units (lead spacing 10 mm)
VRMS
f ≤1 kHz
V AC
VR
CR
Max. dimensions
w × h × l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./MOQ MOQ
Reel
pcs./
Untaped
pcs./
MOQ
V DC nF
1600
600
1.2 4.0 × 9.0 × 13.0
1.5 4.0 × 9.0 × 13.0
2.2 5.0 × 11.0 × 13.0
2.7 5.0 × 11.0 × 13.0
3.3 6.0 × 12.0 × 13.0
3.9 6.0 × 12.0 × 13.0
4.7 6.0 × 12.0 × 13.0
1.0 4.0 × 9.0 × 13.0
1.2 4.0 × 9.0 × 13.0
1.5 4.0 × 9.0 × 13.0
2.2 5.0 × 11.0 × 13.0
2.7 5.0 × 11.0 × 13.0
3.3 5.0 × 11.0 × 13.0
3.9 6.0 × 12.0 × 13.0
4.7 6.0 × 12.0 × 13.0
B32671L1122+*** 4000
B32671L1152+*** 4000
B32671L1222+*** 3320
B32671L1272+*** 3320
B32671L1332+*** 2720
B32671L1392+*** 2720
B32671L1472+*** 2720
B32671L8102+*** 4000
B32671L8122+*** 4000
B32671L8152+*** 4000
B32671L8222+*** 3320
B32671L8272+*** 3320
B32671L8332+*** 3320
B32671L8392+*** 2720
B32671L8472+*** 2720
6800
6800
5200
5200
4400
4400
4400
6800
6800
6800
5200
5200
5200
4400
4400
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
700
2000
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series, intermediate capacitance values and closer tolerances on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 30
B32672L
High V AC, high temperature (wound)
Ordering codes and packing units (lead spacing 15 mm)
VRMS
f ≤1 kHz
V AC
VR
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ MOQ
Reel Untaped
pcs./ pcs./
w × h × l
(composition see
below)
V DC nF
mm
160
250 150
220
5.0 × 10.5 × 18.0 B32672L2154+*** 4680
6.0 × 11.0 × 18.0 B32672L2224+*** 3840
7.0 × 12.5 × 18.0 B32672L2334+*** 3320
8.5 × 14.5 × 18.0 B32672L2474+*** 2720
9.0 × 17.5 × 18.0 B32672L2684+*** 2560
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
2200 1000
5200 4000
5200 4000
4400 4000
3600 4000
3000 2000
2800 2000
2200 1000
5200 4000
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
2200 1000
5200 4000
5200 4000
5200 4000
4400 4000
3600 4000
2800 2000
2800 2000
2200 1000
330
470
680
1000
11.0 × 18.5 × 18.0 B32672L2105+***
ꢀ
200
420
630
68
100
150
220
330
470
680
33
5.0 × 10.5 × 18.0 B32672L4683+*** 4680
5.0 × 10.5 × 18.0 B32672L4104+*** 4680
6.0 × 11.0 × 18.0 B32672L4154+*** 3840
7.0 × 12.5 × 18.0 B32672L4224+*** 3320
8.0 × 14.0 × 18.0 B32672L4334+*** 2920
9.0 × 17.5 × 18.0 B32672L4474+*** 2560
11.0 × 18.5 × 18.0 B32672L4684+***
ꢀ
250
250
5.0 × 10.5 × 18.0 B32672L6333+*** 4680
5.0 × 10.5 × 18.0 B32672L6473+*** 4680
6.0 × 11.0 × 18.0 B32672L6683+*** 3840
7.0 × 12.5 × 18.0 B32672L6104+*** 3320
8.5 × 14.5 × 18.0 B32672L6154+*** 2720
9.0 × 17.5 × 18.0 B32672L6224+*** 2560
47
68
100
150
220
390
10
11.0 × 18.5 × 18.0 B32672L6394J***
ꢀ
1000
5.0 × 10.5 × 18.0 B32672L0103+*** 4680
5.0 × 10.5 × 18.0 B32672L0153+*** 4680
5.0 × 10.5 × 18.0 B32672L0223+*** 4680
6.0 × 11.0 × 18.0 B32672L0333+*** 3840
7.0 × 12.5 × 18.0 B32672L0473+*** 3320
8.5 × 14.5 × 18.0 B32672L0683+*** 2720
9.0 × 17.5 × 18.0 B32672L0104+*** 2560
15
22
33
47
68
100
150
11.0 × 18.5 × 18.0 B32672L0154J***
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series, intermediate capacitance values and closer tolerances on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 30
B32672L
High V AC, high temperature (wound)
Ordering codes and packing units (lead spacing 15 mm)
VRMS
f ≤1 kHz
V AC
VR
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ MOQ
Reel Untaped
pcs./ pcs./
w × h × l
mm
(composition see
below)
V DC nF
1300
500
6.8
10
22
33
47
68
5.0 × 10.5 × 18.0 B32672L7682+*** 4680
5.0 × 10.5 × 18.0 B32672L7103+*** 4680
7.0 × 12.5 × 18.0 B32672L7223+*** 3320
8.5 × 14.5 × 18.0 B32672L7333+*** 2720
9.0 × 17.5 × 18.0 B32672L7473+*** 2560
5200 4000
5200 4000
3600 4000
2800 2000
2800 2000
2200 1000
5200 4000
5200 4000
4400 4000
4400 4000
4400 4000
3600 4000
2800 2000
2800 2000
2200 1000
5200 4000
5200 4000
5200 4000
5200 4000
5200 4000
5200 4000
5200 4000
5200 4000
4400 4000
4400 4000
4400 4000
4400 4000
11.0 × 18.5 × 18.0 B32672L7683J***
ꢀ
600
1600
6.2
6.8
8.2
5.0 × 10.5 × 18.0 B32672L1622+*** 4680
5.0 × 10.5 × 18.0 B32672L1682+*** 4680
6.0 × 11.0 × 18.0 B32672L1822+*** 3840
6.0 × 11.0 × 18.0 B32672L1103+*** 3840
6.0 × 12.0 × 18.0 B32672L1123+*** 3840
7.0 × 12.5 × 18.0 B32672L1153+*** 3320
8.5 × 14.5 × 18.0 B32672L1223+*** 2720
9.0 × 17.5 × 18.0 B32672L1333+*** 2560
10
12
15
22
33
47
11.0 × 18.5 × 18.0 B32672L1473J***
ꢀ
700
2000
1.0
5.0 × 10.5 × 18.0 B32672L8102+*** 4680
5.0 × 10.5 × 18.0 B32672L8122+*** 4680
5.0 × 10.5 × 18.0 B32672L8152+*** 4680
5.0 × 10.5 × 18.0 B32672L8222+*** 4680
5.0 × 10.5 × 18.0 B32672L8272+*** 4680
5.0 × 10.5 × 18.0 B32672L8332+*** 4680
5.0 × 10.5 × 18.0 B32672L8392+*** 4680
5.0 × 10.5 × 18.0 B32672L8472+*** 4680
6.0 × 11.0 × 18.0 B32672L8562+*** 3840
6.0 × 11.0 × 18.0 B32672L8622+*** 3840
6.0 × 11.0 × 18.0 B32672L8682+*** 3840
6.0 × 12.0 × 18.0 B32672L8822+*** 3840
1.2
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.2
6.8
8.2
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series, intermediate capacitance values and closer tolerances on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 30
B32672L
High V AC, high temperature (wound)
Ordering codes and packing units (lead spacing 15 mm)
VRMS
f ≤1 kHz
V AC
VR
CR
Max. dimensions Ordering code
Ammo
pack
pcs./MOQ MOQ MOQ
Reel Untaped
pcs./ pcs./
w × h × l
mm
(composition see
below)
V DC nF
2000
700
900
10
12
15
22
33
7.0 × 12.5 × 18.0 B32672L8103+*** 3320
8.5 × 14.5 × 18.0 B32672L8123+*** 2720
8.5 × 14.5 × 18.0 B32672L8153+*** 2720
9.0 × 17.5 × 18.0 B32672L8223+*** 2560
3600 4000
2800 2000
2800 2000
2800 2000
2200 1000
5200 4000
5200 4000
4400 4000
4400 4000
3600 4000
3000 2000
2800 2000
2800 2000
2800 2000
2200 1000
2200 1000
2200 1000
11.0 × 18.5 × 18.0 B32672L8333J***
0.68 5.0 × 10.5 × 18.0 B32672L9681+*** 4680
ꢀ
2000
1.0
1.2
1.5
2.2
2.7
3.3
3.9
4.7
5.0 × 10.5 × 18.0 B32672L9102+*** 4680
6.0 × 11.0 × 18.0 B32672L9122J*** 3840
6.0 × 11.0 × 18.0 B32672L9152+*** 3840
7.0 × 12.5 × 18.0 B32672L9222+*** 3320
8.0 × 14.5 × 18.0 B32672L9272J*** 2920
8.5 × 14.5 × 18.0 B32672L9332+*** 2720
9.0 × 17.5 × 18.0 B32672L9392J*** 2560
9.0 × 17.5 × 18.0 B32672L9472+*** 2560
5.6 11.0 × 18.5 × 18.0 B32672L9562+***
6.2 11.0 × 18.5 × 18.0 B32672L9622J***
6.8 11.0 × 18.5 × 18.0 B32672L9682K***
ꢀ
ꢀ
ꢀ
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series, intermediate capacitance values and closer tolerances on request.
Composition of ordering code
+ = Capacitance tolerance code:
*** = Packaging code:
K = ±10%
J = ±5%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Technical data
Operating temperature range Max. operating temperature Top,max
Upper category temperature Tmax
+125 °C
+110 °C
ꢀ55 °C
+85 °C
Lower category temperature Tmin
Rated temperature TR
Dissipation factor tan δ (in 10-3) at
≤27 nF 27 nF< CR ≤0.1 µF 0.1 µF < CR ≤1 µF >1 µF
at 20 °C
1 kHz 0.8
10 kHz 1.0
100 kHz 2.0
0.8
1.0
3.0
0.8
1.0
ꢀ
0.8
ꢀ
(upper limit values)
ꢀ
Insulation resistance Rins
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
> 100 GΩ (CR ≤ 0.33 µF)
< 30000 s (CR > 0.33 µF)
1.6 ꢁ VR, 2 s
Category voltage VC
TA (°C)
DC voltage derating
VC = VR
85<TA≤110 VC = VR ꢁ (165ꢀTA)/80
AC voltage derating
VC,RMS = VRMS
(continuous operation with VDC TA ≤ 85
or VAC at f ≤ 1 kHz)
Operating voltage Vop for
short operating periods
(VDC or VAC at f ≤ 1 kHz)
Damp heat test
VC,RMS=VRMS ꢁ (165ꢀTA)/80
TA (°C)
DC voltage (max. hours) AC voltage (max. hours)
TA ≤ 100
Vop = 1.25 ꢁ VC (2000 h)
Vop = 1.0 ꢁ VC,RMS (2000 h)
Vop = 1.0 ꢁ VC,RMS (1000 h)
100<TA≤125 Vop = 1.25 ꢁ VC (1000 h)
56 days/40 °C/93% relative humidity
Capacitance change ꢂ∆C/Cꢂ
Limit values after damp
heat test
≤ 2%
Dissipation factor change ∆ tan δ
Insulation resistance Rins
≤ 1.0 ꢁ 10-3 (at 1 kHz)
≥ 50 GΩ
Reliability:
Failure rate λ
Service life tSL
1 fit (≤ 1 ꢁ 10-9/h) at 0.5 ꢁ VR, 40 °C
200 000 h at 1.0 ꢁ VR, 85 °C
For conversion to other operating conditions and temperatures,
refer to chapter "Quality, 2 Reliability".
Failure criteria:
Total failure
Short circuit or open circuit
Failure due to variation
of parameters
Capacitance change ꢂ∆C/Cꢂ
Dissipation factor tan δ
> 10%
> 4 ꢁ upper limit values
< 1500 MΩ
Insulation resistance Rins
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing 10 mm
Type
B32671L
VRMS (V AC) 200
250
630
500
600
700
VR (V DC)
CR (nF)
1.0
1.2
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.2
6.8
8.2
10
400
1000
1000
1600
2000
dV/dt in V/µs
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
11000
10000
9500
9000
8600
8500
8200
8000
ꢀ
6000
5600
5200
5000
4700
4500
4000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
4700
4300
3800
3400
3200
3100
2700
2500
2300
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
810
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
810
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
810
ꢀ
ꢀ
ꢀ
12
ꢀ
ꢀ
ꢀ
ꢀ
15
ꢀ
540
540
540
540
540
ꢀ
810
810
ꢀ
ꢀ
ꢀ
22
400
400
400
ꢀ
ꢀ
ꢀ
ꢀ
33
ꢀ
ꢀ
ꢀ
47
ꢀ
ꢀ
ꢀ
ꢀ
56
ꢀ
ꢀ
ꢀ
ꢀ
68
400
400
ꢀ
ꢀ
ꢀ
ꢀ
100
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
dV/dt values
Lead spacing 15 mm
Type
VRMS (V AC)
VR (V DC)
CR (nF)
0.68
1.0
B32672L
160
200
420
250
500
600
700
900
250
630
1000
1300
1600
2000
2000
dV/dt in V/µs
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
15000
ꢀ
ꢀ
10000 15000
9400 14100
9000 13500
7500 11000
7100 10600
6800 10000
1.2
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2.2
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2.7
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3.3
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3.9
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
6000
5500
5000
4700
4500
4200
3900
3600
3300
2900
2300
ꢀ
9000
8200
7500
7000
6700
ꢀ
4.7
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
5.6
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
6.2
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3600
3500
3100
2800
2600
2300
2000
1700
1400
ꢀ
6.8
ꢀ
ꢀ
ꢀ
ꢀ
1000
ꢀ
8.2
ꢀ
ꢀ
ꢀ
ꢀ
10
ꢀ
ꢀ
ꢀ
445
ꢀ
1000
ꢀ
ꢀ
12
ꢀ
ꢀ
ꢀ
ꢀ
15
ꢀ
ꢀ
ꢀ
445
445
445
445
ꢀ
ꢀ
ꢀ
22
ꢀ
ꢀ
ꢀ
1000
1000
1000
ꢀ
ꢀ
33
ꢀ
ꢀ
300
300
ꢀ
ꢀ
47
ꢀ
ꢀ
ꢀ
56
ꢀ
ꢀ
ꢀ
ꢀ
68
ꢀ
200
200
200
200
200
ꢀ
300
300
300
300
ꢀ
445
445
445
ꢀ
1000
ꢀ
ꢀ
ꢀ
ꢀ
100
150
220
330
390
470
680
1000
ꢀ
ꢀ
ꢀ
ꢀ
170
170
170
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
300
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
170
170
170
200
200
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
k0 values
Lead spacing 10 mm
Type
VRMS (V AC)
VR (V DC)
CR (nF)
1.0
B32671L
200
250
630
500
600
700
400
k0 in V2/µs
1000
1000
1600
2000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
25000000
23000000
22500000
22000000
21500000
21000000
20900000
20800000
1.2
ꢀ
14400000
1.5
ꢀ
14000000
2.2
ꢀ
13800000
2.7
ꢀ
13600000
3.3
ꢀ
9400000
8600000
8200000
7600000
6800000
6200000
5400000
5000000
4600000
ꢀ
13300000
3.9
ꢀ
13100000
4.7
ꢀ
400000
12000000
5.6
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
6.2
ꢀ
6.8
ꢀ
400000
8.2
ꢀ
ꢀ
10
ꢀ
400000
12
ꢀ
ꢀ
15
ꢀ
200000
200000
200000
200000
200000
ꢀ
400000
22
150000
150000
150000
ꢀ
400000
ꢀ
33
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
47
ꢀ
56
ꢀ
68
150000
150000
ꢀ
100
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
k0 values
Lead spacing 15 mm
Type
VRMS (V AC)
VR (V DC)
CR (nF)
0.68
1.0
B32672L
160
200
420
250
630
500
600
700
900
250
k0 in V2/µs
1000
1300
1600
2000
2000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
30000000
20300000 30000000
19600000 29400000
19200000 28000000
18600000 27500000
18200000 27300000
18000000 27000000
16800000 25200000
15800000 23500000
13100000 19500000
1.2
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.2
11520000 12700000 19000000
6.8
3000000 11200000 12300000 18400000
9920000 11800000
8.2
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
10
ꢀ 1000000 3000000 8960000 11100000
12
ꢀ
ꢀ
ꢀ
ꢀ
8320000 10600000
7360000 10400000
15
ꢀ 1000000
22
ꢀ 1000000 3000000 6400000 9300000
ꢀ 500000 1000000 3000000 5440000 9000000
33
47
ꢀ 500000 1000000 3000000 4480000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
56
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
68
ꢀ 120000 500000 1000000 3000000
100
150
220
330
390
470
680
1000
ꢀ 120000 500000 1000000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
100000 120000 500000 1000000
100000 120000 500000
100000 120000
ꢀ 500000
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
100000 120000
100000
ꢀ
ꢀ
ꢀ
100000
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 30
B32671L
High V AC, high temperature (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 100 °C)
For TA >100 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
400 V DC/200 V AC
630 V DC/250 V AC
1000 V DC/250 V AC
1000 V DC/500 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 30
B32671L
High V AC, high temperature (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤ 100 °C)
For TA >100 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 10 mm
1600 V DC/600 V AC
2000 V DC/700 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 30
B32672L
High V AC, high temperature (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C)
For TA >100 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
250 V DC/160 V AC
420 V DC/200 V AC
630 V DC/250 V AC
1000 V DC/250 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 30
B32672L
High V AC, high temperature (wound)
Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA ≤100 °C)
For TA >100 °C, please refer to "General technical information", section 3.2.3.
Lead spacing 15 mm
1300 V DC/500 V AC
1600 V DC/600 V AC
2000 V DC/700 V AC
2000 V DC/900 V AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Operation at overvoltages during heating and ignition of lamps (TA ≤40 °C)
In lighting applications, the capacitors can be subjected to overvoltages during the heating and ig-
nition periods. An overvoltage occurs when the operation voltage exceeds the permissible
AC voltage at the resonant frequency fr.
For a repetitive application of on/off switching pulses (as for example in the life tests applied by
electronic ballast manufacturers), limits have to be imposed on the time periods under overvolt-
age and on the duty cycle, in order to keep the capacitance value within the required margins:
The overvoltage time tOV should be less than 1 sec.
The maximum duty cycle of the overvoltage is given by
where VRMS,ov is the RMS voltage during period tOV
and VRMS is the permissible AC voltage for continuous operation at the resonant frequency fr
(given by the “permissible AC voltage versus frequency f” graphics in theprevious pages).
The drift of capacitance depends on the Vpp attained, and the total time under overvoltage,
which is calculated in hours as follows:
(Ni ꢁ tOV) / 3600
where Ni is the number of overvoltage impulses and tOV is expressed in seconds.
The maximum drift of capacitance as a function of both parameters is provided graphically in the
following pages.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 30
B32671L
High V AC, high temperature (wound)
Estimation of the maximum drift of capacitance value in function of the number of total
hours overvoltage
Lead spacing 10 mm
500 V AC/1000 V DC
600 V AC/1600 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 30
B32672L
High V AC, high temperature (wound)
Estimation of the maximum drift of capacitance value in function of the number of total
hours overvoltage
Lead spacing 15 mm
600 V AC/1600 V DC
700 V AC/2000 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Mounting guidelines
1
Soldering
Solderability of leads
1.1
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 ±5 °C
2.0 ±0.5 s
Immersion depth
Evaluation criteria:
Visual inspection
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
10 ±1 s
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 ±1 s
(lead spacing ≤ 7.5 mm)
uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
MKP
MKT
< 4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Immersion depth
Shield
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
∆C/C0
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 °C
Temperature inside the capacitor should not exceed the following limits:
ꢀ MKP/MFP 110 °C
ꢀ MKT 160 °C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage conditions Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Flammability
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
5.3
"Flammability"
Resistance to
vibration
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
5.2
"Resistance to vibration"
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Topic
Safety information
Reference chapter
"Mounting guidelines"
Soldering
Cleaning
Do not exceed the specified time or temperature 1 "Soldering"
limits during soldering.
Use only suitable solvents for cleaning capacitors. 2 "Cleaning"
Embedding of
capacitors in
When embedding finished circuit assemblies in
plastic resins, chemical and thermal influences
3 "Embedding of
capacitors in finished
assemblies"
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Symbols and terms
Symbol
α
English
German
Heat transfer coefficient
Wärmeübergangszahl
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
Humidity coefficient of capacitance
Capacitance
C
CR
Rated capacitance
Nennkapazität
∆C
∆C/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
∆C/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
∆t
Time interval
Zeitintervall
∆T
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
∆tan δ
∆V
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
∆V/∆t
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
k0
LS
λ
Pulse characteristic
Series inductance
Serieninduktivität
Failure rate
Ausfallrate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor
Ambient temperature
Serienanteil des Verlustfaktors
Umgebungstemperatur
Tmax
Tmin
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
tOL
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature
Rated temperature
Reference temperature
Reference service life
AC voltage
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Wechselspannung
Tref
tSL
VAC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 30
B32671L ... B32672L
High V AC, high temperature (wound)
Symbol
VC
English
German
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
Teilentlade-Einsatzspannung
Ladespannung
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Vo
Output voltage
Ausgangssspannung
Betriebsspannung
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
(Sinusförmige) Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 30
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 30 of 30
相关型号:
B32672L8562J000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0056uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
B32672L8562J189
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 2000V, 0.0056uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS
©2020 ICPDF网 联系我们和版权申明