B32676E6685K [EPCOS]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 6.8uF, THROUGH HOLE MOUNT, ROHS COMPLIANT;
| 型号： | B32676E6685K |
| 厂家： | 
EPCOS |
| 描述： | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 6.8uF, THROUGH HOLE MOUNT, ROHS COMPLIANT 电容器 |
| 文件： | 总22页 (文件大小：310K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Film Capacitors
Metallized Polypropylene Film Capacitors (MKP)
Series/Type:
B32674 ... B32678
Date:
June 2013
© EPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Metallized polypropylene film capacitors (MKP)
B32674 ... B32678
MKP DC link ꢀ high power series
Typical applications
For high ripple current modules in:
Frequency converters
Dimensional drawings
2-pin version
Industrial and high-end power supplies
Solar inverters
Climatic
Max. operating temperature: 105 °C (case)
Climatic category (IEC 60068-1): 40/100/56
Construction
Dielectric: metallized polypropylene (MKP)
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
4-pin version
Features
Excellent self-healing properties
Over-voltage capability
Optimized electrical contact
High frequency ripple current
High reliability
Long useful life
RoHS-compatible
Halogen-free capacitors available on
request
Dimensions in mm
Terminals
Parallel wire leads, lead-free tinned
2-pin and 4-pin versions
Standard lead lengths: 6 ꢀ1 mm
Special lead lengths are available on
request
Lead
diameter
d1
Version
Lead
spacing
Type
±0.4
2-pin
2-pin
4-pin
4-pin
27.5
37.5
37.5
52.5
0.8
1.0
1.2
1.2
B32674D
B32676T
B32676G
B32678G
Marking
Manufacturer's logo and lot number,
date code, rated capacitance (coded),
capacitance tolerance (code letter),
rated DC voltage
Delivery mode
Bulk (untaped, lead length 6 ꢀ1 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Overview of available types
Lead spacing 27.5 mm
Type
Page
VR (V DC)
CR (µF)
0.47
0.68
1.0
B32674
6
300
450
630
750
875
1.5
2.2
3.0
3.3
4.0
4.7
5.0
5.6
6.0
6.8
7.5
8.0
8.2
10
12
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Lead spacing 37.5 mm
Type
Page
VR (V DC)
CR (µF)
1.5
B32676
8
300
450
630
750
875
2.0
2.7
3.3
3.5
4.0
4.7
5.6
6.2
6.8
7.5
8.2
9.0
10
12
14
15
20
22
25
30
35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Lead spacing 52.5 mm
Type
Page
VR (V DC)
CR (µF)
15
B32678
10
300
450
630
750
875
20
25
30
35
40
47
60
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 22
B32674
MKP DC link ꢀ high power series
Ordering codes and packing units (lead spacing 27.5 mm)
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
below)
IRMS,max
70 °C
IRMS,max
70 °C
ESRtyp Straight
70 °C terminals,
10 kHz 20 kHz 10 kHz Untaped
µF
mm
mm
A
A
mΩ
pcs./MOQ
VR,85
°
C = 300 V DC, Vop,70
°
=
450 V DC
C
2.2
3.3
4.7
5.0
5.6
6.8
8.0
8.2
10
11.0 × 19.0 × 31.5
12.5 × 21.5 × 31.5
14.0 × 24.5 × 31.5
15.0 × 24.5 × 31.5
15.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
16.0 × 32.0 × 31.5
18.0 × 33.0 × 31.5
21.0 × 31.0 × 31.5
22.0 × 36.5 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32674D3225+000 7.5
B32674D3335+000 9.0
B32674D3475+000 11.0
B32674D3505+000 11.0
B32674D3565+000 11.5
B32674D3685+000 12.5
B32674D3805+000 13.5
B32674D3825+000 14.0
B32674D3106+000 15.0
B32674D3126+000 16.0
6.5
8.0
9.5
10.0
10.5
11.5
12.5
13.0
14.0
15.0
7.5
5.3
4.1
4.0
3.9
3.7
3.4
3.2
2.9
2.5
1280
1120
1040
960
960
800
880
800
720
640
12
VR,85
°
C = 450 V DC, Vop,70
°
= 630 V DC
C
1.5
2.2
3.3
4.7
5.0
5.6
6.0
6.8
7.5
11.0 × 19.0 × 31.5
12.5 × 21.5 × 31.5
15.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
16.0 × 32.0 × 31.5
18.0 × 33.0 × 31.5
21.0 × 31.0 × 31.5
22.0 × 36.5 × 31.5
22.0 × 36.5 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32674D4155+000 6.5
B32674D4225+000 8.0
B32674D4335+000 9.5
B32674D4475+000 11.5
B32674D4505+000 12.0
B32674D4565+000 12.5
B32674D4605+000 13.0
B32674D4685+000 14.0
B32674D4755+000 15.0
6.0
7.0
8.5
10.5
11.0
11.0
11.5
12.5
13.0
9.2
7.8
5.2
5.0
5.0
4.4
4.3
4.0
3.9
1280
1120
960
800
880
800
720
640
640
VR,85
°
C = 630 V DC, Vop,70
°
= 800 V DC
C
1.0
1.5
2.2
3.3
4.7
5.0
11.0 × 19.0 × 31.5
12.5 × 21.5 × 31.5
15.0 × 24.5 × 31.5
16.0 × 32.0 × 31.5
22.0 × 36.5 × 31.5
22.0 × 36.5 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32674D6105+000 5.0
B32674D6155+000 6.5
B32674D6225+000 7.0
B32674D6335+000 7.0
B32674D6475+000 9.5
B32674D6505+000 10.5
4.5
6.0
6.0
6.0
9.5
9.5
14.4
14.3
8.0
6.5
5.8
1280
1120
960
880
640
5.8
640
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 22
B32674
MKP DC link ꢀ high power series
Ordering codes and packing units (lead spacing 27.5 mm)
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
below)
IRMS,max
70 °C
IRMS,max
70 °C
ESRtyp Straight
70 °C terminals,
10 kHz 20 kHz 10 kHz Untaped
µF
mm
mm
A
A
mΩ
pcs./MOQ
VR,85
°
C = 750 V DC, Vop,70
°
= 900 V DC
C
0.68 11.0 × 19.0 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32674D1684+000 5.0
B32674D1105+000 6.0
B32674D1155+000 7.5
B32674D1225+000 9.0
B32674D1335+000 10.0
B32674D1405+000 11.0
4.5
5.5
6.0
7.5
9.0
23.3
12.4
9.5
6.6
6.0
1280
1120
1040
800
720
640
1.0
1.5
2.2
3.3
4.0
12.5 × 21.5 × 31.5
14.0 × 24.5 × 31.5
18.0 × 27.5 × 31.5
21.0 × 31.0 × 31.5
22.0 × 36.5 × 31.5
10.0
5.6
VR,85
°
C = 875 V DC, Vop,70 C = 1050 V DC
°
0.47 11.0 × 19.0 × 31.5
0.68 11.0 × 21.0 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
B32674D8474+000 5.0
B32674D8684+000 6.0
B32674D8105+000 7.5
B32674D8155+000 7.0
B32674D8225+000 10.0
B32674D8305+000 11.0
4.5
5.5
6.0
6.5
9.0
22.9
18.6
13.6
8.5
5.1
6.8
1280
1280
1040
800
800
640
1.0
1.5
2.2
3.0
13.5 × 23.0 × 31.5
18.0 × 27.5 × 31.5
18.0 × 33.0 × 31.5
22.0 × 36.5 × 31.5
10.0
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 22
B32676
MKP DC link ꢀ high power series
Ordering codes and packing units (lead spacing 37.5 mm)
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
below)
IRMS,max
70 °C
IRMS,max
70 °C
ESRtyp Straight
70 °C terminals,
10 kHz 20 kHz 10 kHz Untaped
µF
mm
mm
A
A
mΩ
pcs./MOQ
VR,85
°
C = 300 V DC, Vop,70
°
= 450 V DC
C
6.2
9
24.0 × 15.0 × 41.5
24.0 × 19.0 × 41.5
ꢀ
ꢀ
B32676T3625+000
B32676T3905K000 11.0
9.5
9.5
6.0
4.5
3.2
2.7
2.6
2.4
2.3
1.5
1040
780
640
440
440
440
400
192
10.5
14.0
14.5
15.0
15.5
16.0
17.0
15
20
22
25
30
35
20.0 × 39.5 × 42.0 10.2 B32676G3156+000 15.0
28.0 × 37.0 × 42.0 10.2 B32676G3206+000 15.5
28.0 × 42.5 × 42.0 10.2 B32676G3226+000 16.0
28.0 × 42.5 × 42.0 10.2 B32676G3256+000 16.5
30.0 × 45.0 × 42.0 20.3 B32676G3306+000 17.0
33.0 × 48.0 × 42.0 20.3 B32676G3356+000 18.0
VR,85
°
C = 450 V DC, Vop,70
°
= 630 V DC
C
4.0
4.7
8.2
10
15
20
24.0 × 15.0 × 41.5
24.0 × 9.0 × 41.5
ꢀ
ꢀ
B32676T4405+000
B32676T4475+000
8.5
9.5
8.5
9.0
7.0
7.0
8.8
7.3
5.0
4.0
1.5
1040
780
640
640
440
400
192
20.0 × 39.5 × 42.0 10.2 B32676G4825+000 11.5
20.0 × 39.5 × 42.0 10.2 B32676G4106+000 12.5
28.0 × 42.5 × 42.0 10.2 B32676G4156+000 14.0
30.0 × 45.0 × 42.0 20.3 B32676G4206K000 16.0
33.0 × 48.0 × 42.0 20.3 B32676G4256K000 18.0
10.0
11.0
13.0
15.0
17.0
25
VR,85
°
C = 630 V DC, Vop,70
°
= 800 V DC
C
2.7
3.5
6.8
7.5
8.2
10
12
14
15
24.0 × 15.0 × 41.5
24.0 × 19.0 × 41.5
ꢀ
ꢀ
B32676T6275+000
B32676T6355+000
8.0
9.0
8.0
9.0
9.5
8.0
7.0
7.1
6.7
6.2
5.7
5.5
3.6
2.3
1040
780
640
640
440
440
440
400
192
20.0 × 39.5 × 42.0 10.2 B32676G6685+000 10.0
20.0 × 39.5 × 42.0 10.2 B32676G6755+000 10.0
28.0 × 37.0 × 42.0 10.2 B32676G6825+000 10.5
28.0 × 42.5 × 42.0 10.2 B32676G6106+000 11.0
28.0 × 42.5 × 42.0 10.2 B32676G6126+000 11.5
30.0 × 45.0 × 42.0 20.3 B32676G6146+000 12.0
33.0 × 48.0 × 42.0 20.3 B32676G6156+000 15.0
9.5
10.0
10.5
11.0
11.5
14.0
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 22
B32676
MKP DC link ꢀ high power series
Ordering codes and packing units (lead spacing 37.5 mm)
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
below)
IRMS,max
70 °C
IRMS,max
70 °C
ESRtyp Straight
70 °C terminals,
10 kHz 20 kHz 10 kHz Untaped
µF
mm
mm
A
A
mΩ
pcs./MOQ
VR,85
°
C = 750 V DC, Vop,70
°
= 900 V DC
C
2.0
2.7
4.7
5.6
6.8
9.0
10
24.0 × 15.0 × 41.5
24.0 × 19.0 × 41.5
ꢀ
ꢀ
B32676T1205+000
B32676T1275+000
7.5
8.5
7.5
10.0
8.0
7.8
7.1
6.7
6.0
5.8
2.7
1040
780
640
640
440
440
400
192
8.5
10.0
10.5
11.5
13.0
14.0
19.0
20.0 × 39.5 × 42.0 10.2 B32676G1475+000 11.0
20.0 × 39.5 × 42.0 10.2 B32676G1565+000 11.5
28.0 × 37.0 × 42.0 10.2 B32676G1685+000 12.5
30.0 × 45.0 × 42.0 20.3 B32676G1905+000 14.0
30.0 × 45.0 × 42.0 20.3 B32676G1106+000 15.0
33.0 × 48.0 × 42.0 20.3 B32676G1126+000 19.5
12
VR,85
°
C = 875 V DC, Vop,70 C = 1050 V DC
°
1.5
2.0
3.3
4.0
4.7
6.8
7.5
10
24.0 × 15.0 × 41.5
24.0 × 19.0 × 41.5
ꢀ
ꢀ
B32676T8155+000
B32676T8205+000
7.0
8.0
7.0
7.5
12.0
9.0
11.0
9.8
8.6
8.3
8.0
3.7
1040
780
640
640
440
440
400
192
20.0 × 39.5 × 42.0 10.2 B32676G8335+000 11.0
20.0 × 39.5 × 42.0 10.2 B32676G8405+000 11.5
28.0 × 37.0 × 42.0 10.2 B32676G8475+000 12.5
28.0 × 42.5 × 42.0 10.2 B32676G8685+000 14.0
30.0 × 45.0 × 42.0 20.3 B32676G8755+000 15.0
33.0 × 48.0 × 42.0 20.3 B32676G8106K000 19.5
10.0
10.5
11.5
13.0
14.0
19.0
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 22
B32678
MKP DC link ꢀ high power series
Ordering codes and packing units (lead spacing 52.5 mm)
CR
Max. dimensions
w × h × l
P1
Ordering code
(composition see
below)
IRMS,max
70 °C
IRMS,max
70 °C
ESRtyp Straight
70 °C terminals,
10 kHz 20 kHz 10 kHz Untaped
µF
mm
mm
A
A
mΩ
pcs./MOQ
VR,85
°
°
C = 300 V DC, Vop,70
°
= 450 V DC
C
40
47
60
30.0 × 45.0 × 57.5 20.3 B32678G3406+000 19.0
35.0 × 50.0 × 57.5 20.3 B32678G3476+000 21.0
35.0 × 50.0 × 57.5 20.3 B32678G3606K000 23.0
18.0
20.0
22.0
1.9
1.7
1.6
280
108
108
VR,85
C = 450 V DC, Vop,70
°
= 630 V DC
C
30
35
40
35.0 × 50.0 × 57.5 20.3 B32678G4306+000 19.5
35.0 × 50.0 × 57.5 20.3 B32678G4356+000 21.0
35.0 × 50.0 × 57.5 20.3 B32678G4406K000 22.0
18.5
20.0
21.0
2.1
1.7
1.5
108
108
108
VR,85
°
°
°
C = 630 V DC, Vop,70
°
= 800 V DC
C
20
25
35.0 × 50.0 × 57.5 20.3 B32678G6206+000 17.5
35.0 × 50.0 × 57.5 20.3 B32678G6256+000 20.0
16.5
19.0
2.9
2.6
108
108
VR,85
C = 750 V DC, Vop,70
°
= 900 V DC
C
15
20
30.0 × 45.0 × 57.5 20.3 B32678G1156K000 20.0
35.0 × 50.0 × 57.5 20.3 B32678G1206K000 21.0
19.5
20.0
3.7
2.6
280
108
VR,85
15
C = 875 V DC, Vop,70
°
C = 1050 V DC
35.0 × 50.0 × 57.5 20.3 B32678G8156K000 21.0
20.0
3.4
108
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
K = ±10%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Technical data
Reference standard: IEC 61071. All data given at T = 20 °C, unless otherwise specified.
Max. operating temperature, Top,max +105 °C
Operating temperature range (case)
Upper category temperature Tmax
Lower category temperature Tmin
< 3.0 ꢁ ESRtyp
< 2.5 ꢁ ESRtyp
< 1.5 ꢁ ESRtyp
+100 °C
–40 °C
LS 27.5
LS 37.5
LS 52.5
ESR (at 10 kHz)
Insulation Resistance Rins
given as time constant
30 000 s
t= CR ꢁ Rins, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage between terminals (10 s) 1.5 ꢁ VR
DC test voltage terminal to case (10 s)
Maximum peak current (A)
2110 V AC, 50 Hz
Damp heat test
Limit values after damp heat test
56 days/40 °C/93% relative humidity
Capacitance change | ∆C/C | ≤ 5%
Dissipation factor change ∆ tan δ ≤ 1.5 · 10-3 (at 1 kHz)
≥ 50% of minimum
Insulation resistance Rins
as-delivered values
Reliability:
VR (V DC)
Failure rate λ
1 fit (≤ 1 ꢁ 10-9/h) at 0.5 ꢁ VR, 40 °C
200 000 h at VR, 85 °C
For conversion to other operating conditions and
temperatures, refer to chapter "Quality, 2 Reliability".
Service life tSL
300
450
630
750
875
Continuous operation voltage
Vop (V DC) at 70 °C
450
630
800
900
1050
Continuous operation voltage
Vop (V DC) at 85 °C
Maximum peak voltage
VP,max (V DC)
300
450
450
675
630
950
750
875
1125
1300
For temperatures between
85 °C and 100 °C
1.2%/°C of derating respect Vop at 85 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor. These parameters are given for isolated pulses in such a way that the heat generated
by one pulse will be completely dissipated before applying the next pulse. For a train of pulses,
please refer to the curves of permissible AC voltage-current versus frequency.
dV/dt values
Lead spacing
Type
27.5 mm
B32674
37.5 mm
B32676
52.5 mm
B32678
VR (V DC)
dV/dt in V/µs
300 450 630 750 875 300 450 630 750 875 300 450 630 750 875
40 75 100 125 150 22 54 73 85 100 15 35 50 60 70
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
ESL values
ESL
2-pin
4-pin
25 nH
17 nH
Typical waveforms
Restrictions:
VR: Maximum operating peak voltage of either polarity but of a non-reversing waveform, for which
the capacitor has been designed for continuous operation.
AC ≤ 0.2 ꢁ VR
VP, max: Maximum permissible recurrent voltage that may appear for 2% of the period.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Mounting guidelines
1
Soldering
Solderability of leads
1.1
The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1.
Before a solderability test is carried out, terminals are subjected to accelerated ageing (to
IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far
higher than the upper category temperature of the capacitors, the terminal wires should be cut off
from the capacitor before the ageing procedure to prevent the solderability being impaired by the
products of any capacitor decomposition that might occur.
Solder bath temperature
Soldering time
235 ±5 °C
2.0 ±0.5 s
Immersion depth
Evaluation criteria:
Visual inspection
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Wetting of wire surface by new solder ≥90%, free-flowing solder
1.2
Resistance to soldering heat
Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A.
Conditions:
Series
Solder bath temperature Soldering time
MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C
coated
10 ±1 s
uncoated (lead spacing > 10 mm)
MFP
MKP (lead spacing > 7.5 mm)
MKT boxed (case 2.5 × 6.5 × 7.2 mm)
5 ±1 s
(lead spacing ≤ 7.5 mm)
uncoated (lead spacing ≤ 10 mm)
insulated (B32559)
MKP
MKT
< 4 s
recommended soldering
profile for MKT uncoated
(lead spacing ≤ 10 mm) and
insulated (B32559)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Immersion depth
Shield
2.0 +0/ꢀ0.5 mm from capacitor body or seating plane
Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor
body and liquid solder
Evaluation criteria:
Visual inspection
No visible damage
2% for MKT/MKP/MFP
5% for EMI suppression capacitors
As specified in sectional specification
∆C/C0
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature Tmax. Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 °C
Temperature inside the capacitor should not exceed the following limits:
ꢀ MKP/MFP 110 °C
ꢀ MKT 160 °C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 °C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Safety information
Reference chapter
"General technical
information"
Storage conditions Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Flammability
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
5.3
"Flammability"
Resistance to
vibration
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
5.2
"Resistance to vibration"
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Topic
Safety information
Reference chapter
"Mounting guidelines"
Soldering
Cleaning
Do not exceed the specified time or temperature 1 "Soldering"
limits during soldering.
Use only suitable solvents for cleaning capacitors. 2 "Cleaning"
Embedding of
capacitors in
When embedding finished circuit assemblies in
plastic resins, chemical and thermal influences
3 "Embedding of
capacitors in finished
assemblies"
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Symbols and terms
Symbol
α
English
German
Heat transfer coefficient
Wärmeübergangszahl
αC
Temperature coefficient of capacitance Temperaturkoeffizient der Kapazität
A
Capacitor surface area
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
βC
Humidity coefficient of capacitance
Capacitance
C
CR
Rated capacitance
Nennkapazität
∆C
∆C/C
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
∆C/CR
Capacitance tolerance (relative deviation Kapazitätstoleranz (relative Abweichung
from rated capacitance)
Time differential
vom Nennwert)
dt
Differentielle Zeit
∆t
Time interval
Zeitintervall
∆T
Absolute temperature change
(self-heating)
Absolute Temperaturänderung
(Selbsterwärmung)
∆tan δ
∆V
Absolute change of dissipation factor
Absolute voltage change
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
dV/dt
Time differential of voltage function (rate Differentielle Spannungsänderung
of voltage rise)
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
∆V/∆t
E
Voltage change per time interval
Activation energy for diffusion
Self-inductance
ESL
ESR
f
Equivalent series resistance
Frequency
Ersatz-Serienwiderstand
Frequenz
f1
Frequency limit for reducing permissible Grenzfrequenz für thermisch bedingte
AC voltage due to thermal limits
Reduzierung der zulässigen
Wechselspannung
f2
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
fr
Resonant frequency
Resonanzfrequenz
FD
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
FT
i
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
IC
Category current (max. continuous
current)
Kategoriestrom (max. Dauerstrom)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Symbol
IRMS
English
German
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
(Sinusförmiger) Wechselstrom
iz
Inkonstanz der Kapazität
Impulskennwert
k0
LS
λ
Pulse characteristic
Series inductance
Serieninduktivität
Failure rate
Ausfallrate
λ0
Constant failure rate during useful
service life
Konstante Ausfallrate in der
Nutzungsphase
λtest
Pdiss
Pgen
Q
Failure rate, determined by tests
Dissipated power
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Generated power
Heat energy
ρ
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
R
R
Ri
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Innenwiderstand
Rins
RP
RS
S
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
t
T
Temperature
Temperatur
τ
Time constant
Zeitkonstante
tan δ
tan δD
Dissipation factor
Dielectric component of dissipation
factor
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
tan δP
tan δS
TA
Parallel component of dissipation factor Parallelanteil des Verlfustfaktors
Series component of dissipation factor
Ambient temperature
Serienanteil des Verlustfaktors
Umgebungstemperatur
Tmax
Tmin
Upper category temperature
Lower category temperature
Obere Kategorietemperatur
Untere Kategorietemperatur
tOL
Operating life at operating temperature Betriebszeit bei Betriebstemperatur und
and voltage
-spannung
Top
TR
Operating temperature
Rated temperature
Reference temperature
Reference service life
AC voltage
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Wechselspannung
Tref
tSL
VAC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 22
B32674 ... B32678
MKP DC link ꢀ high power series
Symbol
VC
English
German
Category voltage
Category AC voltage
Kategoriespannung
(Sinusförmige)
VC,RMS
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
VCD
Vch
VDC
VFB
Vi
Corona-discharge onset voltage
Charging voltage
DC voltage
Gleichspannung
Fly-back capacitor voltage
Input voltage
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Vo
Output voltage
Vop
Vp
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Impuls-Spitzenspannung
Spannungshub
Vpp
VR
Nennspannung
Amplitude of rated AC voltage
Amplitude der Nenn-Wechselspannung
R
VRMS
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
(Sinusförmige) Wechselspannung
VSC
Vsn
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Snubber capacitor voltage
Z
Impedance
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 22
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 22 of 22
相关型号：
B32676E6685K000
Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 6.8uF, Through Hole Mount, ROHS COMPLIANT
EPCOS
B32676E6755J
Film Capacitor, Polypropylene, 630V, 5% +Tol, 5% -Tol, 7.5uF, Through Hole Mount, ROHS COMPLIANT
EPCOS
B32676E6755J000
Film Capacitor, Polypropylene, 630V, 5% +Tol, 5% -Tol, 7.5uF, Through Hole Mount, ROHS COMPLIANT
EPCOS
B32676E6755K
Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 7.5uF, Through Hole Mount, ROHS COMPLIANT
EPCOS
B32676E6755K000
Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 7.5uF, Through Hole Mount, ROHS COMPLIANT
EPCOS
B32676E6825J
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 8.2uF, THROUGH HOLE MOUNT, ROHS COMPLIANT
EPCOS
B32676E6825J000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 8.2uF, THROUGH HOLE MOUNT, ROHS COMPLIANT
EPCOS
B32676E6825K
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 8.2uF, THROUGH HOLE MOUNT, ROHS COMPLIANT
EPCOS
B32676E6825K000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 8.2uF, THROUGH HOLE MOUNT, ROHS COMPLIANT
EPCOS
B32676E8105J000
Film Capacitor, Polypropylene, 875V, 5% +Tol, 5% -Tol, 1uF, Through Hole Mount, ROHS COMPLIANT
EPCOS
B32676E8105K
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 875V, 1uF, THROUGH HOLE MOUNT, ROHS COMPLIANT
EPCOS
B32676E8105K000
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 875V, 1uF, THROUGH HOLE MOUNT, ROHS COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明