B32924C3565K189 [EPCOS]

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 5.6uF, THROUGH HOLE MOUNT, RADIAL LEADED;
B32924C3565K189
型号: B32924C3565K189
厂家: EPCOS    EPCOS
描述:

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 5.6uF, THROUGH HOLE MOUNT, RADIAL LEADED

PC 电容器
文件: 总9页 (文件大小:244K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Film Capacitors  
EMI Suppression Capacitors (MKP)  
Series/Type:  
B32921 ... B32926  
Date:  
May 2005  
© EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the  
information contained therein without EPCOS' prior express consent is prohibited.  
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical  
and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Associ-  
ation), unless otherwise agreed.  
Please read "Important notes" on page 9.  
EMI suppression capacitors (MKP)  
X2 / 305 VAC  
B32921 ... B32926  
Typical applications  
Dimensional drawing  
X2 class for interference suppression  
"Across the line" applications  
Climatic  
Max. operating temperature: 125 °C  
Climatic category (IEC 60068-1): 40/105/56  
Construction  
Dielectric: polypropylene (MKP)  
Plastic case (UL 94 V-0)  
Epoxy resin sealing (UL 94 V-0)  
Dimensions in mm  
Features  
Very small dimensions  
Self-healing properties  
Lead spacing Lead diameter Type  
±0.4  
d1  
Terminals  
0.6  
0.8  
0.8  
0.8  
1.0  
B32921  
B32922  
B32923  
B32924  
B32926  
10  
15  
Parallel wire leads, lead-free tinned  
Standard lead lengths: 6 1 mm  
Special lead lengths available on request  
22.5  
27.5  
37.5  
Marking  
Manufacturer's logo, lot number,  
date code, rated capacitance (coded),  
cap. tolerance (code letter),  
rated AC voltage,  
Marking examples  
= 10 mm  
15 mm/CR1 µF  
series number, sub-class (X2),  
dielectric code (MKP), climatic category,  
passive flammability category, approvals.  
Delivery mode  
Bulk (untaped)  
= 22.5, 27.5,  
Taped (Ammo pack or reel)  
For taping details, refer to chapter  
"Taping and packing".  
37.5 mm/CR>1 µF  
Approvals  
Marks of conformity  
Standards  
Certificate  
EN 132400, IEC 60384-14  
40005536/40010694  
E97863 / E157153  
UL 1414 / UL 1283  
CSA C22.2 No.1 / No. 8  
CQC (GB/T 14472-1998)  
E97863 / E157153 (approved by UL)  
CQC001007-14859  
2
B32921 ... B32926  
X2 / 305 VAC  
Overview of available types  
Lead spacing 10 mm  
15 mm  
22.5 mm  
B32923  
27.5 mm  
B32924  
37.5 mm  
B32926  
Type  
CR (µF)  
0.010  
0.022  
0.033  
0.047  
0.068  
0.10  
0.15  
0.22  
0.33  
0.47  
0.56  
0.68  
0.82  
1.0  
B32921  
B32922  
1.5  
2.2  
3.3  
4.7  
5.6  
6.8  
8.2  
10  
3
B32921 ... B32926  
X2 / 305 VAC  
Ordering codes and packing units  
Lead spacing CR  
Max. dimensions  
w × h × l  
mm  
Ordering code  
(composition see  
below)  
Ammo Reel  
pack  
pcs./unit pcs./unit pcs./unit  
Untaped  
mm  
10  
µF  
0.010  
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0 B32921A2473+***  
6.0 × 12.0 × 13.0 B32921A2683M***  
6.0 × 12.0 × 13.0
6.0 × 12.0 × 13.0 B32921A2104M***  
6.0 × 12.0 × 13.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0 B32922A2683+***  
5.0 × 10.5 × 18.0
6.0 × 11.0 × 18.0 B32922A2104+***  
5.0 × 10.5 × 18.0
7.0 × 12.5 × 18.0 B32922A2154+***  
6.0 × 12.0 × 18.0
8.5 × 14.5 × 18.0 B32922A2224+***  
8.0 × 14.0 × 18.0 B32922T2224+***  
7.0 × 12.5 × 18.0
8.0 × 14.0 × 18.0 B32922T3224+***  
9.0 × 17.5 × 18.0 B32922A2334+***  
13.0 × 14.0 × 18.0 B32922T2334+***  
8.0 × 14.0 × 18.0
8.5 × 14.5 × 18.0
13.0 × 14.0 × 18.0 B32922T3334+***  
9.0 × 17.5 × 18.0
11.0 × 18.5 × 18.0
11.0 × 18.5 × 18.0
1000  
1000  
1000  
830  
680  
680  
680  
680  
680  
1170  
1170  
960  
1170  
960  
1700  
1700  
1700  
1300  
1100  
1100  
1100  
1100  
1100  
1300  
1300  
1100  
1300  
1100  
1300  
900  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
1000  
500  
500  
1000  
500  
500  
300  
500  
500  
300  
500  
0.022  
0.033  
0.047  
0.047  
0.068  
0.068  
0.10  
0.10  
0.033  
0.047  
0.068  
0.068  
0.10  
15  
0.10  
0.15  
0.15  
0.22  
0.22  
0.22  
0.22  
0.33  
0.33  
0.33  
0.33  
0.33  
0.47  
0.56  
0.68  
1170  
830  
960  
680  
1100  
700  
730  
750  
830  
900  
730  
750  
640  
700  
500  
730  
680  
750  
700  
500  
640  
700  
550  
250  
250  
550  
Composition of ordering code  
+ = Capacitance tolerance code:  
M = ±20%  
*** = Packaging code:  
289 = Ammo pack  
189 = Reel  
K = ±10%  
000 = Untaped (lead length 6 1 mm)  
(Closer tolerances on request)  
4
B32921 ... B32926  
X2 / 305 VAC  
Ordering codes and packing units  
Lead spacing CR Max. dimensions  
Ordering code  
(composition see  
below)  
Ammo Reel  
pack  
pcs./unit pcs./unit pcs./unit  
Untaped  
w × h × l  
mm  
22.5  
µF  
0.33  
mm  
8.5 × 16.5 × 26.5 B32923A2334+***  
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
7.5 × 14.0 × 26.5 B32923T3334+***  
8.5 × 16.5 × 26.5 B32923A2474M***  
10.5 × 16.5 × 26.5 B32923B2474+***  
8.5 × 16.5 × 26.5
8.5 × 16.5 × 26.5
10.5 × 18.5 × 26.5 B32923A2684M***  
10.5 × 20.5 × 26.5 B32923B2684+***  
10.5 × 16.5 × 26.5
10.5 × 18.5 × 26.5
12.0 × 22.0 × 26.5 B32923A2105M***  
11.0 × 20.5 × 26.5
12.0 × 22.0 × 26.5
14.5 × 29.5 × 26.5
14.5 × 29.5 × 26.5
480  
680  
580  
550  
480  
390  
480  
480  
390  
390  
390  
390  
500  
700  
600  
500  
500  
400  
500  
500  
400  
400  
400  
400  
510  
720  
630  
570  
510  
540  
510  
510  
540  
540  
540  
540  
450  
510  
450  
260  
260  
0.33  
0.33  
0.33  
0.47  
0.47  
0.47  
0.56  
0.68  
0.68  
0.68  
0.82  
1.0  
1.0  
1.5  
1.5  
2.2  
370  
350  
Composition of ordering code  
+ = Capacitance tolerance code:  
M = ±20%  
*** = Packaging code:  
289 = Ammo pack  
189 = Reel  
K = ±10%  
000 = Untaped (lead length 6 1 mm)  
(Closer tolerances on request)  
5
B32921 ... B32926  
X2 / 305 VAC  
Ordering codes and packing units  
Lead spacing CR  
Max. dimensions  
w × h × l  
mm  
Ordering code  
(composition see  
below)  
Ammo Reel  
pack  
pcs./unit pcs./unit pcs./unit  
Untaped  
mm  
27.5  
µF  
0.68  
11.0 × 19.0 × 31.5
11.0 × 19.0 × 31.5
11.0 × 21.0 × 31.5 B32924A2105+***  
11.0 × 19.0 × 31.5
13.5 × 23.0 × 31.5 B32924A2155M***  
14.0 × 24.5 × 31.5 B32924B2155+***  
12.5 × 21.5 × 31.5
18.0 × 27.5 × 31.5 B32924A2225+***  
14.0 × 24.5 × 31.5
21.0 × 31.0 × 31.5 B32924A2335M***  
18.0 × 27.5 × 31.5
16.0 × 32.0 × 31.5
22.0 × 36.5 × 31.5 B32924A2475M***  
18.0 × 33.0 × 31.5
21.0 × 31.0 × 31.5
22.0 × 36.5 × 31.5
14.0 × 25.0 × 41.5
18.0 × 32.5 × 41.5 B32926A2335+***  
16.0 × 28.5 × 41.5
20.0 × 39.5 × 41.5 B32926A2475M***  
18.0 × 32.5 × 41.5
20.0 × 39.5 × 41.5 B32926A2565M***  
18.0 × 32.5 × 41.5
28.0 × 42.5 × 41.5 B32926A2685M***  
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5 B32926A2825M***  
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5
350  
350  
350  
350  
250  
320  
320  
320  
320  
260  
260  
280  
200  
260  
180  
200  
220  
160  
200  
180  
160  
115  
90  
100  
75  
90  
75  
90  
55  
75  
55  
55  
0.82  
1.0  
1.0  
1.5  
1.5  
1.5  
2.2  
2.2  
3.3  
3.3  
3.3  
4.7  
4.7  
4.7  
5.6  
2.2  
3.3  
3.3  
4.7  
4.7  
5.6  
5.6  
6.8  
6.8  
8.2  
8.2  
300  
37.5  
10.0  
55  
Composition of ordering code  
+ = Capacitance tolerance code:  
M = ±20%  
*** = Packaging code:  
289 = Ammo pack  
189 = Reel  
K = ±10%  
000 = Untaped (lead length 6 1 mm)  
(Closer tolerances on request)  
6
B32921 ... B32926  
X2 / 305 VAC  
Technical data  
Standard version (A/B/T):  
B3292*A.... / B3292*B.... / B3292*T....  
Miniaturized version (C/D): B3292*C.... / B3292*D.... (preferred types)  
Max. operating temperature Top,max  
+125 °C (for CR 1 µF with A/B/T version)  
+110 °C (for CR >1 µF or C/D version)  
Dissipation factor tan δ (in 10-3)  
at 20 °C (upper limit values)  
CR0.1 µF 0.1µF<CR 2.2 µF CR >2.2 µF  
at 1 kHz  
100 kHz  
1.0  
5.0  
1.0  
2.0  
Insulation resistance Rins  
or time constant τ = CR Rins  
at 20 °C, rel. humidity 65%  
(minimum as-delivered values)  
DC test voltage  
CR0.33 µF CR>0.33 µF  
100 000 M30 000 s  
2121 V, 2 s  
B
Passive flammability category  
to IEC 40 (CO) 752  
310 V (50/60 Hz)  
305 V (50/60 Hz)  
Maximum continuous AC voltage VAC  
Rated AC voltage (IEC 60384-14)  
Maximum continuous DC voltage VDC 760 V (630 V for C/D version)  
Operating AC voltage Vop at high  
temperature  
TA 110 °C  
TA 110 °C  
Vop = VAC  
(continuously)  
Vop = 1.25 VAC (1000 h)  
110 °C <TA 125 °C Vop = VAC  
(1000 h) (only  
for A/B/T version)  
Damp heat test  
56 days / 40 °C / 93% relative humidity  
Limit values after damp heat test  
Capacitance change C/Cꢂ  
5%  
Dissipation factor change tan δ ≤ 0.5 10-3 (at 1 kHz)  
Insulation resistance Rins  
1.0 10-3 (at 10 kHz)  
50% of minimum  
as-delivered values  
or time constant τ = CR Rins  
7
B32921 ... B32926  
X2 / 305 VAC  
Pulse handling capability  
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal  
voltages, expressed in V/µs.  
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the  
capacitor, expressed in V2/µs.  
Note:  
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the  
capacitor.  
dV/dt and k0 values  
Lead  
10 mm  
15 mm  
22.5 mm  
27.5 mm  
37.5 mm  
spacing  
Version A/B/T C/D  
A/B/T C/D  
A/B/T C/D  
A/B/T C/D  
A/B/T C/D  
100 80  
dV/dt in  
550  
475  
400  
340  
200  
170  
150  
120  
V/µs  
k0 in  
V2/µs  
473000 408500 344000 292400 172000 146200 129000 103200 86000 68800  
Impedance Z versus frequency f  
(typical values)  
8
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application. As a  
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them  
than the customers themselves. For these reasons, it is always ultimately incumbent on the  
customer to check and decide whether an EPCOS product with the properties described in the  
product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of passive electronic components  
or failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in which  
the malfunction or failure of a passive electronic component could endanger human life or health  
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of  
suitable design of the customer application or other action taken by the customer (e.g. installation  
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the  
event of malfunction or failure of a passive electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as “hazardous”). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Consequently,  
we cannot guarantee that all products named in this publication will always be available.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of  
the “General Terms of Delivery for Products and Services in the Electrical Industry”  
published by the German Electrical and Electronics Industry Association (ZVEI).  
7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,  
PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap,  
WindCap are trademarks registered or pending in Europe and in other countries. Further  
information will be found on the Internet at www.epcos.com/trademarks.  
Page 9 of 9  

相关型号:

B32924C3565K289

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 5.6uF, THROUGH HOLE MOUNT, RADIAL LEADED
EPCOS

B32924C3565M000

Film Capacitors
EPCOS

B32924C3565M189

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 5.6uF, THROUGH HOLE MOUNT, RADIAL LEADED
EPCOS

B32924C3565M289

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 630V, 5.6uF, THROUGH HOLE MOUNT, RADIAL LEADED
EPCOS

B32924C3684

Film Capacitors
EPCOS

B32924C3684K000

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS

B32924C3684K189

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS

B32924C3684K289

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS

B32924C3684K783

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS

B32924C3684K784

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS

B32924C3684K786

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS

B32924C3684K787

Film Capacitors EMI Suppression Capacitors (MKP)
EPCOS