B3528 [EPCOS]

SAW RF filter GPS; SAW RF滤波器的GPS
B3528
型号: B3528
厂家: EPCOS    EPCOS
描述:

SAW RF filter GPS
SAW RF滤波器的GPS

全球定位系统
文件: 总7页 (文件大小:66K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
SAW RF filter  
GPS  
Series/type:  
B3528  
Ordering code:  
B39162B3528U510  
Date:  
Version:  
March 22, 2011  
2.2  
EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures  
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.  
SAW Components  
SAW RF filter  
Data sheet  
B3528  
1575.42 MHz  
Application  
Low-loss RF filter for GPS applications  
Impedance transformation from 50 to 100 Ω  
Unbalanced to balanced operation  
Very low insertion attenuation  
Low amplitude ripple  
Usable passband 2.0 MHz  
Features  
Package size 3.0 x 3.0 x 1.1 mm3  
Package code DCC6D  
RoHS compatible  
Approximate weight 0.037 g  
Package for Surface Mount Technology (SMT)  
Ni, gold-plated terminals  
Lead free soldering compatible with J - STD20C  
AEC-Q200 qualified component family  
Electrostatic Sensitive Device (ESD)  
Pin configuration  
2  
4,6  
Input unbalanced  
Output balanced  
1,3,5 Case ground (to be grounded)  
Please read cautions and warnings and  
important notes at the end of this document.  
2
March 22, 2011  
SAW Components  
SAW RF filter  
Data sheet  
B3528  
1575.42 MHz  
Characteristics  
Temperature range for specification:  
Terminating source impedance:  
Terminating load impedance:  
T
ZS  
= –40 ˚C to +85 ˚C  
50 Ω  
=
ZL = 100 (balanced)  
min.  
typ.  
max.  
@ 25 ˚C  
1575.42  
Center frequency  
fC  
MHz  
Maximum insertion attenuation  
αmax  
1574.42 ... 1576.42 MHz  
1.2  
0.2  
1.9  
0.6  
dB  
dB  
Amplitude ripple (p-p)  
∆α  
1574.42 ... 1576.42 MHz  
VSWR  
Input  
1574.42 ... 1576.42 MHz  
1574.42 ... 1576.42 MHz  
1.3  
1.3  
1.7  
1.7  
Output  
Attenuation  
α
100.0 ... 960.0 MHz  
960.0 ... 1475.0 MHz  
1475.0 ... 1515.0 MHz  
1515.0 ... 1525.42 MHz  
1625.0 ... 1635.0 MHz  
1635.0 ... 1675.0 MHz  
1675.0 ... 1850.0 MHz  
1850.0 ... 2400.0 MHz  
50  
45  
36  
25  
25  
36  
45  
40  
60  
52  
43  
36  
36  
45  
55  
45  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
Please read cautions and warnings and  
important notes at the end of this document.  
3
March 22, 2011  
SAW Components  
SAW RF filter  
Data sheet  
B3528  
1575.42 MHz  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–45/+125 ˚C  
–45/+125 ˚C  
DC voltage  
VDC  
3
501)  
V
V
machine model, 10 pulses  
ESD voltage  
VESD  
source 50Ω, load100Ω  
Input power at  
cw  
cw  
cw  
cw  
1574.42 ... 1576.42 MHz  
2400 ... 2483.5 MHz  
PIN  
PIN  
5
dBm  
dBm  
dBm  
dBm  
20  
25  
10  
824...960, 1710...2170 MHz PIN  
960...1525 MHz PIN  
1)  
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.  
Please read cautions and warnings and  
important notes at the end of this document.  
4
March 22, 2011  
SAW Components  
SAW RF filter  
Data sheet  
B3528  
1575.42 MHz  
Transfer function  
Transfer function (wideband)  
Please read cautions and warnings and  
important notes at the end of this document.  
5
March 22, 2011  
SAW Components  
SAW RF filter  
Data sheet  
B3528  
1575.42 MHz  
References  
Type  
B3528  
Ordering code  
Marking and package  
Packaging  
B39162B3528U510  
C61157-A7-A68  
F61074-V8228-Z000  
L_1126  
Date codes  
B3528_NB.s3p, B3528_WB.s3p  
S-parameters  
see file header for port/pin assignment table.  
Soldering profile  
RoHS compatible  
S_6001  
defined as compatible with the following documents:  
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT  
AND OF THE COUNCIL of 27 January 2003 on the restriction  
of the use of certain hazardous substances in electrical and  
electronic equipment. 2005/618/EC from April 18th, 2005,  
amending Directive 2002/95/EC of the European Parliament  
and of the Council for the purposes of establishing the maxi-  
mum concentration values for certain hazardous substances in  
electrical and electronic equipment."  
Moldability  
Before using in overmolding environment, please contact your  
EPCOS sales office.  
Matching coils  
See Inductor pdf-catalog  
http://www.tdk.co.jp/tefe02/coil.htm#aname1  
and Data Library for circuit simulation  
http://www.tdk.co.jp/etvcl/index.htm  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Systems, Acoustics, Waves Business Group  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2011. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
6
March 22, 2011  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately  
incumbent on the customer to check and decide whether an EPCOS product with the  
properties described in the product specification is suitable for use in a particular customer  
application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained  
by third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be  
available. The aforementioned does not apply in the case of individual agreements deviating  
from the foregoing for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current  
version of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,  
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,  
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,  
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks  
registered or pending in Europe and in other countries. Further information will be found on  
the Internet at www.epcos.com/trademarks.  
7
March 22, 2011  

相关型号:

B3529

SAW Components
EPCOS

B352F110M24

VI Chip - BCM Bus Converter Module
VICOR

B352F110T24

VI Chip - BCM Bus Converter Module
VICOR

B352F110T24_1

BCM Bus Converter
VICOR

B352F110T24_2

HV Bus Converter Family
VICOR

B352F110T30

BCM Bus Converter
VICOR

B352T110T24

BCM Bus Converter
VICOR

B352T110T30

BCM Bus Converter
VICOR

B352U0001F

Fiber Optic ST Connector, 8.3/125um, Single Mode, Simplex
AMPHENOL

B352U0001I

Fiber Optic ST Connector, 8.3/125um, Single Mode, Simplex
AMPHENOL

B352U0001M

Fiber Optic ST Connector, 8.3/125um, Single Mode, Simplex
AMPHENOL

B3531

Analog IC
ETC