B4146_1 [EPCOS]
Short range devices; 短距离设备
| 型号： | B4146_1 |
| 厂家： | 
EPCOS |
| 描述： | Short range devices |
| 文件： | 总9页 (文件大小：93K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW filter
Short range devices
Series/type:
B4146
Ordering code:
B39881B4146U510
Date:
Version:
June 26, 2006
2.0
EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
Application
■ Low-loss RF filter for mobile telephone AMPS
systems, receive path
■ Low amplitude ripple
■ Usable passband 25 MHz
■ Unbalanced to balanced operation
■ Impedance transformation from 50 Ω to 200 Ω
Features
■ Package size 3.0 x 3.0 x 1.1 mm3
■ Package code DCC6D
■ RoHS compatible
■ Approximate weight 0.037 g
■ Package for Surface Mount Technology
(SMT)
■ Ni, gold-plated terminals
■ Lead free soldering compatible with J - STD20C
■ AEC-Q200 qualified component family
■ Electrostactic Sensitive Device (ESD)
Pin configuration
■ 2
■ 4
■ 6
Input
Balanced output
Balanced output
■ 1, 3, 5 Ground, to be grounded
Please read cautions and warnings and
important notes at the end of this document.
2
June 26, 2006
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
Characteristics
Reference temperature:
Terminating source impedance:
Terminating load impedance:
TA
ZS
=
=
+ 25 ˚C
50Ω
ZL = 200 Ω || 68nH(balanced)
min.
typ.
max.
Center frequency
fC
—
881.50
—
MHz
dB
Maximum insertion attenuation
αmax
869.00 ... 894.00 MHz
—
—
—
2.5
0.7
1.8
3.0
1.2
1.9
Amplitude ripple (p-p)
869.00 ... 894.00 MHz
∆α
dB
VSWR
869.00 ... 894.00 MHz
Attenuation
α
0.00 ... 824.00 MHz
824.00 ... 849.00 MHz
924.00 ... 970.00 MHz
970.00 ... 1300.00 MHz
1300.00 ... 2000.00 MHz
2000.00 ... 3000.00 MHz
50
35
30
50
40
30
60
40
40
65
60
50
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
Please read cautions and warnings and
important notes at the end of this document.
3
June 26, 2006
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
TA = –30 ˚C to +85 ˚C
ZS 50 Ω
ZL = 200 Ω || 68nH(balanced)
=
min.
typ.
max.
@ 25˚C
Center frequency
fC
—
881.50
—
MHz
dB
Maximum insertion attenuation
αmax
869.00 ... 894.00 MHz
—
—
—
2.5
0.7
1.8
3.0
1.2
1.9
Amplitude ripple (p-p)
∆α
869.00 ... 894.00 MHz
dB
VSWR
869.00 ... 894.00 MHz
Attenuation
α
0.00 ... 824.00 MHz
824.00 ... 849.00 MHz
924.00 ... 970.00 MHz
970.00 ... 1300.00 MHz
1300.00 ... 2000.00 MHz
2000.00 ... 3000.00 MHz
50
35
30
50
40
30
60
40
40
65
60
50
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
Please read cautions and warnings and
important notes at the end of this document.
4
June 26, 2006
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
TA = –40 ˚C to +85 ˚C
ZS 50 Ω
ZL = 200 Ω || 68nH(balanced)
=
min.
typ.
max.
@ 25˚C
Center frequency
fC
—
881.50
—
MHz
dB
Maximum insertion attenuation
αmax
869.00 ... 894.00 MHz
—
—
—
2.8
1.0
1.8
3.1
1.3
1.9
Amplitude ripple (p-p)
∆α
869.00 ... 894.00 MHz
dB
VSWR
869.00 ... 894.00 MHz
Attenuation
α
0.00 ... 824.00 MHz
824.00 ... 849.00 MHz
924.00 ... 970.00 MHz
970.00 ... 1300.00 MHz
1300.00 ... 2000.00 MHz
2000.00 ... 3000.00 MHz
50
35
30
50
40
30
60
40
40
65
60
50
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
Maximum ratings
Operable temperature range TA
Storage temperature range Tstg
–40/+85 ˚C
–40/+85 ˚C
DC voltage
ESD
VDC
VESD
PIN
5
50
5
V
V
Human Body Model
Input power max.
dBm
source impedance 50 Ω
Please read cautions and warnings and
important notes at the end of this document.
5
June 26, 2006
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
Transfer function
Transfer function
Please read cautions and warnings and
important notes at the end of this document.
6
June 26, 2006
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
Reflection functions (measurement)
Please read cautions and warnings and
important notes at the end of this document.
7
June 26, 2006
SAW Components
SAW filter
B4146
881.50 MHz
Data sheet
References
Type
B4146
Ordering code
Marking and package
Packaging
B39881B4146U510
C61157-A7-A68
F61074-V8089-Z000
L_1126
Date codes
B4146_SB.s2p
B4146_WB.s2p
S-parameters
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2006. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
8
June 26, 2006
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compo-
nents or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer appli-
cations in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic compo-
nent.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be avail-
able.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-
Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
9
June 26, 2006
相关型号：
B41503-A7338-M
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 3300uF, THROUGH HOLE MOUNT
EPCOS
B41503-A7478-M
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 4700uF, THROUGH HOLE MOUNT
EPCOS
B41503-B3339-M
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 33000uF, Through Hole Mount,
EPCOS
B41503-B9687-M
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 100V, 680uF, THROUGH HOLE MOUNT
EPCOS
B41503-J3109-M
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 10000uF, Through Hole Mount
EPCOS
B41503-J3159-M
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 15000uF, Through Hole Mount
EPCOS
B41503-J3688-M
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 6800uF, Through Hole Mount
EPCOS
©2020 ICPDF网 联系我们和版权申明