B41570-A5688-Q [EPCOS]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 6800uF, STUD MOUNT, RADIAL LEADED;型号: | B41570-A5688-Q |
厂家: | EPCOS |
描述: | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 6800uF, STUD MOUNT, RADIAL LEADED PC 电容器 |
文件: | 总17页 (文件大小:474K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Capacitors with screw terminals
Series/Type:
B41550, B41570
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Capacitors with screw terminals
B41550, B41570
SIKOREL ꢀ 105 °C
Long-life grade capacitors
Applications
Highly professional power supplies
Features
Outstanding reliability
Operation at temperatures up to 125 °C permissible without
insulating sleeve1)
High ripple current capability
Long useful life
B41550
B41570
Shelf life up to 10 years
All-welded construction ensures reliable electrical contact
RoHS-compatible
Construction
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud are not insulated
1) For ≤ 51.6 mm: 2500 h, for ≥ 64.3 mm: 5000 h
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
16 ... 100 V DC
1.15 ꢁ VR
Rated capacitance CR
Capacitance tolerance
1500 ... 220000 µF
ꢀ10/+30% ꢂ Q
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
d = 35.7 mm: approx. 10 nH
d = 51.6 mm: approx. 15 nH
d ≥ 64.3 mm: approx. 20 nH
Useful life
d ≤ 51.6 mm d ≥ 64.3 mm Requirements:
105 °C; VR; IAC,R
85 °C; VR; IAC,max
40 °C; VR; 2.4 ꢁ IAC,R
40 °C; VR; 2.7 ꢁ IAC,R
Voltage endurance test
105 °C; VR; IAC,R
> 10000 h
> 15000 h
> 200000 h
ꢀ
> 20000 h
> 25000 h
ꢀ
∆C/C
ESR
Ileak
≤ ±45% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
> 200000 h
Post test requirements:
5000 h
∆C/C
ESR
Ileak
≤ ±15% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 0.75 mm, frequency range 10 ... 55 Hz,
acceleration max. 10 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
IEC climatic category
To IEC 60068-1:
55/105/56 (ꢀ55 °C/+105 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-804
IEC 60384-4
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
IAC,max
≤ 51.6 mm
> 51.6 mm
40 A
30 A
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Dimensional drawings
B41550
B41570
d = 35.7 mm
Ring clip/clamp mounting
Threaded stud mounting
d ≥ 51.6 mm
Dimensions and weights
Ter-
Dimensions (mm) with insulating sleeve
Approx.
minal
weight (g)
d
l ±1
55.7
80.7
l1 ±1
l2 +0/ꢀ1 d1
d2 max. a +0.2/ꢀ0.4
8.2 12.7
8.2 12.7
M5
M5
M5
M5
M5
M5
M5
M5
35.7 +0/ꢀ0.8
35.7 +0/ꢀ0.8
62.0 13
M8
65
105
135
220
370
440
620
840
87.0 13
112.0 13
87.0 17
87.0 17
112.0 17
112.0 17
149.5 17
M8
35.7 +0/ꢀ0.8 105.7
M8
8.2
8.2
8.2
8.2
8.2
8.2
12.7
22.2
28.5
28.5
31.7
31.7
51.6 +0/ꢀ0.8
64.3 +0/ꢀ0.8
80.7
80.7
M12
M12
M12
M12
M12
64.3 +0/ꢀ0.8 105.7
76.9 +0/ꢀ0.7 105.7
76.9 +0/ꢀ0.7 143.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Packing
Capacitor
diameter d (mm) (mm)
lenght l Packing units
Capacitor
diameter d (mm) (mm)
76.9
length l
Packing units
(pcs.)
(pcs.)
36
35.7
51.6
64.3
all
all
all
97.0 - 168.7 16
191.0 - 220.7 12
36
25
For ecological reasons the packing is pure cardboard.
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
Thread Toothed
washers
Screws/nuts
Maximum
torque
For terminals M5
For mounting M8
A 5.1 DIN 6797 Cylinder-head screw M5 × 8 DIN 84-4.8
J 8.2 DIN 6797 Hex nut BM 8 DIN 439
J 12.5 DIN 6797 Hex nut BM 12 DIN 439
2 Nm
4 Nm
10 Nm
M12
The following items must be ordered separately. For details, refer to chapter "Capacitors with
screw terminals ꢀ Accessories".
Item
Type
Ring clips
B44030
B44030
B44020
Clamps for capacitors with d ≥ 64.3 mm
Insulating parts
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Overview of available types
VR (V DC)
16
25
40
63
100
Case dimensions d × l (mm)
CR (µF)
1500
35.7 × 55.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
64.3 × 80.7
64.3 × 80.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
2200
35.7 × 55.7
35.7 × 80.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
64.3 × 80.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
3300
4700
35.7 × 55.7
35.7 × 80.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
64.3 × 80.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
6800
35.7 × 55.7
10000
15000
22000
33000
47000
68000
100000
150000
220000
35.7 × 55.7
35.7 × 80.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
64.3 × 80.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
35.7 × 80.7
35.7 × 80.7
35.7 × 105.7
51.6 × 80.7
64.3 × 80.7
64.3 × 105.7
76.9 × 105.7
76.9 × 143.2
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max IAC,max IAC,R
Ordering code
100 Hz dimensions 100 Hz 100 Hz 10 kHz 100 Hz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C 20 °C 20 °C 40 °C 85 °C 105 °C below)
mΩ
mΩ
mΩ
A
A
A
VR = 16 V DC
10000 35.7 × 55.7 15
15000 35.7 × 80.7 12
22000 35.7 × 80.7 9.0
33000 35.7 × 105.7 7.0
47000 51.6 × 80.7 5.0
68000 64.3 × 80.7 5.0
100000 64.3 × 105.7 4.0
150000 76.9 × 105.7 4.0
220000 76.9 × 143.2 4.0
38
26
21
17
13
13
10
10
8.0
26
21
18
13
13
13
9.0
10
7.0
17
23
29
30
30
40
40
40
40
12
16
21
24
30
38
39
40
40
6.2
8.1
10
12
16
17
19
22
26
B415*0E4109Q000
B415*0E4159Q000
B415*0E4229Q000
B415*0E4339Q000
B415*0E4479Q000
B415*0E4689Q000
B415*0E4100Q000
B415*0E4150Q000
B415*0A4220Q000
VR = 25 V DC
6800 35.7 × 55.7 16
10000 35.7 × 80.7 14
15000 35.7 × 80.7 11
22000 35.7 × 105.7 8.0
33000 51.6 × 80.7 6.0
47000 64.3 × 80.7 5.0
68000 64.3 × 105.7 5.0
100000 76.9 × 105.7 4.0
150000 76.9 × 143.2 4.0
32
28
24
20
13
13
11
9.0
7.0
27
21
17
15
12
11
9.0
8.0
6.0
18
21
26
30
30
40
40
40
40
13
15
19
22
29
34
35
39
40
6.4
7.5
9.4
B415*0A5688Q000
B415*0E5109Q000
B415*0E5159Q000
B415*0E5229Q000
B415*0E5339Q000
B415*0E5479Q000
B415*0E5689Q000
B415*0E5100Q000
B415*0A5150Q000
11
15
17
17
21
26
VR = 40 V DC
4700 35.7 × 55.7 14
6800 35.7 × 80.7 12
33
28
27
15
13
12
8.0
9.0
7.0
24
17
14
15
13
12
8.0
7.0
6.0
20
24
26
30
30
40
40
40
40
14
16
19
22
29
34
35
39
40
7.2
8.4
9.4
B415*0E7478Q000
B415*0A7688Q000
B415*0E7109Q000
B415*0E7159Q000
B415*0E7229Q000
B415*0E7339Q000
B415*0E7479Q000
B415*0E7689Q000
B415*0A7100Q000
10000 35.7 × 80.7 11
15000 35.7 × 105.7 8.0
22000 51.6 × 80.7 6.0
33000 64.3 × 80.7 5.0
47000 64.3 × 105.7 5.0
68000 76.9 × 105.7 4.0
100000 76.9 × 143.2 4.0
11
15
17
17
21
26
Composition of ordering code
* = Mounting style
5 = for capacitors with ring clip/clamp mounting
7 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Technical data and ordering codes
CR
Case
ESRtyp ESRmax Zmax
IAC,max IAC,max IAC,R
Ordering code
100 Hz dimensions 100 Hz 100 Hz 10 kHz 100 Hz 100 Hz 100 Hz (composition see
20 °C
µF
d × l
mm
20 °C 20 °C 20 °C 40 °C 85 °C 105 °C below)
mΩ
mΩ
mΩ
A
A
A
VR = 63 V DC
2200 35.7 × 55.7 26
3300 35.7 × 80.7 17
4700 35.7 × 80.7 13
6800 35.7 × 105.7 10
10000 51.6 × 80.7 7.0
15000 64.3 × 80.7 6.0
22000 64.3 × 105.7 5.0
33000 76.9 × 105.7 4.0
47000 76.9 × 143.2 3.0
60
39
31
23
18
13
10
8.0
7.0
30
24
20
17
14
11
9.0
8.0
6.0
13
19
24
28
30
40
40
40
40
9.4
4.7
6.8
8.7
B415*0E8228Q000
B415*0E8338Q000
B415*0E8478Q000
B415*0E8688Q000
B415*0E8109Q000
B415*0E8159Q000
B415*0E8229Q000
B415*0E8339Q000
B415*0A8479Q000
14
17
20
27
31
35
39
40
10
13
15
17
21
26
VR = 100 V DC
1500 35.7 × 55.7 36
2200 35.7 × 80.7 26
3300 35.7 × 105.7 17
4700 51.6 × 80.7 15
6800 64.3 × 80.7 10
83
57
37
29
20
15
13
11
9.0
34
30
24
20
17
14
11
9.0
8.0
12
16
22
28
36
40
40
40
40
8.8
4.2
5.9
8.0
B415*0A9158Q000
B415*0E9228Q000
B415*0E9338Q000
B415*0E9478Q000
B415*0E9688Q000
B415*0E9109Q000
B415*0E9159Q000
B415*0A9229Q000
B415*0A9339Q000
12
16
20
26
32
36
38
40
10
13
16
18
19
23
10000 64.3 × 80.7
15000 64.3 × 105.7
22000 76.9 × 105.7
33000 76.9 × 143.2
8
7
6
5
Composition of ordering code
* = Mounting style
5 = for capacitors with ring clip/clamp mounting
7 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
d ≤ 51.6 mm
d ≥ 64.3 mm
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" on how to interpret the useful life graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Frequency factor of permissible ripple current IAC versus frequency f
VR (V DC)
16; 25 40
63
d
100
d
d = 35.7 mm
d = 51.6 mm
d = 64.3 mm
d = 76.9 mm
b
a
a
a
c
b
a
a
c
c
c
c
b
c
Frequency characteristics of ESR
Typical behavior
VR (V DC)
16; 25 40
63
d
100
d
d = 35.7 mm
d = 51.6 mm
d = 64.3 mm
d = 76.9 mm
b
a
a
a
c
b
a
a
c
c
c
c
b
c
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
CR
VR
d
Curve
µF
V DC
mm
150000
68000
16
40
76.9
76.9
a
b
15000
100
64.3
c
10000
47000
1500
16
40
100
35.7
35.7
35.7
d
e
f
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
lmax
R
Widerstand
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 17
B41550, B41570
SIKOREL ꢀ 105 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 17 of 17
相关型号:
B41570-A8479-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 63V, 47000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-A9158-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 100V, 1500uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-A9229-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 100V, 22000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-A9339-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 100V, 33000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-E4159-Q
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 30% +Tol, 10% -Tol, 15000uF, Stud Mount, RADIAL LEADED
EPCOS
B41570-E5109-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 10000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-E5229-Q
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 30% +Tol, 10% -Tol, 22000uF, Stud Mount, RADIAL LEADED
EPCOS
B41570-E7109-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 10000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-E7159-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 15000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-E7229-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 22000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-E7339-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 33000uF, STUD MOUNT, RADIAL LEADED
EPCOS
B41570-E7478-Q
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 4700uF, STUD MOUNT, RADIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明