B41691A5308Q007 [EPCOS]
Axial-lead and soldering star capacitors; 轴向引线和焊接星电容器型号: | B41691A5308Q007 |
厂家: | EPCOS |
描述: | Axial-lead and soldering star capacitors |
文件: | 总14页 (文件大小:522K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41691, B41791
Date:
December 2006
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41691, B41791
Long useful life ꢀ up to 150 °C
Applications
For automotive applications up to 150 °C
Features
Long useful life, 2000 h at up to 150 °C
Low ESR also at 63 V DC
High ripple current capability
High vibration resistance
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
Taping and packing
Axial-lead capacitors will be delivered in pallet package.
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel.
Soldering star capacitors are packed in cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Specifications and characteristics in brief
Rated voltage VR
25 ... 63 V DC
1.15 ꢁ VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
100 ... 4000 µF
ꢀ10/+30% ꢂ Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
14
16
18
20/21
Terminals
Length l (mm) Approx. ESL (nH)
axial
25
ꢀ
ꢀ
21
ꢀ
ꢀ
ꢀ
6
22
ꢀ
24
ꢀ
ꢀ
6
26
ꢀ
29
33
ꢀ
7
ꢀ
ꢀ
29
30
39
49
ꢀ
38
ꢀ
34
38
ꢀ
45
50
ꢀ
soldering star 25
ꢀ
30
39
7
8
10
11
ꢀ
ꢀ
9
ꢀ
Useful life
Requirements:
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit
Ileak ≤ initial specified limit
150 °C, VR, 0.5 ꢁ IAC,R
125 °C, VR, IAC,R
125 °C, VR, IAC,max
105 °C, VR, IAC,max
85 °C, VR, IAC,max
40 °C, VR, 2.1 ꢁ IAC,R
Voltage endurance test
125 °C; VR
> 2000 h
> 10000 h
> 4000 h
> 8000 h
> 15000 h
> 500000 h
Post test requirements:
5000 h
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% initial specified limit
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 1.5 mm, at 10 Hz ... 2 kHz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1:
55/125/56 (ꢀ55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d × l
dmax × Imax
Approx. weight
Packing units (pcs.)
mm
mm
g
Pallet
288
200
200
180
180
160
160
140
140
110
Reel
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 30.5
16.5 × 40
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
5.1
450
350
350
250
ꢀ
5.7
6.8
8.9
11.7
11.1
14.7
13.5
20.0
25.0
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Soldering star capacitors
Dimensional drawing
Dimensions, weights and packing units
d × l
d
max × Imax
c ±0.1
mm
Approx. weight
Packing units
mm
mm
g
pcs.
480
480
480
300
200
300
200
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 32
17.5 × 41.5
19.5 × 32
19.5 × 41.5
12.5
14.5
14.5
16.5
16.5
18.5
18.5
5.4
6.1
7.2
9.4
12.2
11.8
15.4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Overview of available types
VR (V DC)
25
40
63
Case dimensions d × l (mm)
CR (µF)
100
12 × 30
14 × 25
14 × 30
150
220
330
12 × 30
14 × 25
12 × 30
14 × 30
470
16 × 39
18 × 30
560
680
20 × 29
18 × 39
21 × 39
16 × 30
1000
16 × 30
16 × 39
18 × 30
1200
1500
20 × 29
18 × 39
21 × 49
16 × 39
18 × 30
1800
2000
2200
2700
3000
4000
20 × 29
18 × 39
21 × 39
21 × 49
21 × 39
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Case dimensions and ordering codes
VR
CR
100 Hz
20 °C
Case
Ordering code
Ordering code
Axial reel
Ordering code
Soldering star
dimensions Axial pallet
d × l
V DC µF
330
mm
25
40
63
12 × 30
14 × 25
16 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 25
14 × 30
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
B41691A5337Q007 B41691A5337Q009 B41791A5337Q000
B41691A5477Q007 B41691A5477Q009 B41791A5477Q000
B41691A5108Q007 B41691A5108Q009 B41791A5108Q000
470
1000
1500
1500
1800
2000
3000
4000
330
B41691A5158Q007
B41691B5158Q007
B41691A5188Q007
B41691A5208Q007
B41691A5308Q007
B41691A5408Q007
B41791A5158Q000
B41791B5158Q000
B41791A5208Q000
B41691A7337Q007 B41691A7337Q009 B41791A7337Q000
B41691A7477Q007 B41691A7477Q009 B41791A7477Q000
B41691A7687Q007 B41691A7687Q009 B41791A7687Q000
470
680
1000
1000
1200
1500
2200
2700
100
B41691A7108Q007
B41691B7108Q007
B41691A7128Q007
B41691A7158Q007
B41691A7228Q007
B41691A7278Q007
B41791A7108Q000
B41791B7108Q000
B41791A7158Q000
B41691A8107Q007 B41691A8107Q009 B41791A8107Q000
B41691A8157Q007 B41691A8157Q009 B41791A8157Q000
B41691A8227Q007 B41691A8227Q009 B41791A8227Q000
150
220
470
470
560
680
1000
1200
B41691A8477Q007
B41691B8477Q007
B41691A8567Q007
B41691A8687Q007
B41691A8108Q007
B41691A8128Q007
B41791A8477Q000
B41791B8477Q000
B41791A8687Q000
Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Technical data
CR ESRtyp ESRmax ESRmax ESRmax Zmax
IAC,max IAC,max IAC,max IAC,R
IAC,max
100 Hz 100 Hz 100 Hz 100 Hz 10 kHz 100 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz
20 °C
µF
20 °C 20 °C ꢀ40 °C 20 °C 20 °C
85 °C 105 °C 125 °C 125 °C 150 °C
mΩ
mΩ
mΩ
mΩ
mΩ
A
A
A
A
A
VR = 25 V DC
330
470
175
125
65
44
42
35
31
22
17
290
210
110
73
69
58
50
37
29
1600
1200
550
370
370
300
270
180
135
150
110
60
42
38
32
28
22
17
150
102
55
39
35
30
26
21
16
4.8
5.1
7.3
10.1
10.5
11.3
14.2
16.1
20.2
4.3
4.6
6.5
9.0
9.4
10.1
12.7
14.3
18
3.4
3.7
5.2
7.2
7.5
2.1
2.2
3.2
4.4
4.6
4.9
6.2
7.0
8.8
1.05
1.1
1.6
2.2
2.3
2.4
3.1
3.5
4.4
1000
1500
1500
1800
2000
3000
4000
8.1
10.2
11.5
14.5
VR = 40 V DC
330
470
680
1000
1000
1200
1500
2200
2700
150
110
80
55
52
44
35
26
21
240
170
120
80
77
55
53
39
30
1250
900
600
410
410
320
270
185
150
115
85
65
45
40
35
27
21
18
105
77
60
41
37
33
25
20
17
5.3
6.4
7.3
10.0
10.3
11.2
14.2
16.1
20.1
4.8
5.7
6.5
8.9
9.2
10.0
12.7
14.3
17.9
3.8
4.6
5.2
7.2
7.4
2.3
2.8
3.1
4.3
4.5
4.9
6.2
7.0
8.7
1.15
1.4
1.5
2.1
2.2
2.4
3.1
3.5
4.3
8.0
10.2
11.5
14.4
VR = 63 V DC
100
150
220
470
470
560
680
1000
1200
350
240
165
80
77
65
54
38
32
350
240
170
120
114
75
78
47
38
1900
1300
900
410
410
320
280
200
160
160
115
80
42
38
34
27
21
17
150
110
76
40
36
33
25
20
16
4.7
5.1
6.5
10.1
10.5
11.3
14.3
16.1
20.1
4.2
4.5
5.8
9.0
9.3
10.1
12.8
14.3
18.0
3.3
3.6
4.6
7.2
7.5
2.0
2.2
2.8
4.4
4.5
4.9
6.2
7.0
8.8
1.0
1.1
1.4
2.2
2.3
2.4
3.1
3.5
4.4
8.1
10.3
11.5
14.4
Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Useful life
1)
depending on ambient temperature TA under ripple current operating conditions at VR
Useful life
1)
depending on case temperature TC under ripple current operating conditions at VR
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
Equivalent series resistance ESR
versus frequency f
Impedance Z
versus frequency f
Typical behavior for 470 µF/63 V
Typical behavior for 470 µF/63 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 14
B41691, B41791
Long useful life ꢀ up to 150 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 14
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 14 of 14
相关型号:
B41691A5338Q007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 3000uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明