B41692A5228Q007 [EPCOS]
Axial-lead and soldering star capacitors; 轴向引线和焊接星电容器型号: | B41692A5228Q007 |
厂家: | EPCOS |
描述: | Axial-lead and soldering star capacitors |
文件: | 总16页 (文件大小:554K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41692, B41792
Date:
December 2006
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Applications
Compact design for automotive applications up to 150 °C
Features
Up to 150 °C operating temperature at reduced voltage
applied
Long useful life, 2000 h at up to 140 °C
Very high ripple current capability
Compact design
High vibration resistance
Shelf life up to 15 years at storage temperatures up to 40 °C.
To ensure solderability, the capacitors should be built into the
application within one year of delivery. After a total of two
years' storage, the operating voltage must be applied for one
hour to ensure the specified leakage current.
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Also available with soldering stars
Taping and packing
Axial-lead capacitors will be delivered in pallet package.
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel.
Soldering star capacitors are packed in cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Specifications and characteristics in brief
Rated voltage VR
25 ... 63 V DC
Surge voltage VS
1.15 ꢁ VR
Rated capacitance CR
Capacitance tolerance
220 ... 6800 µF
ꢀ10/+30% ꢂ Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
14
16
18
20/21
Terminals
Length l (mm) Approx. ESL (nH)
axial
25
ꢀ
ꢀ
21
ꢀ
ꢀ
ꢀ
6
22
ꢀ
24
ꢀ
ꢀ
6
26
ꢀ
29
33
ꢀ
7
ꢀ
ꢀ
29
30
39
49
ꢀ
38
ꢀ
34
38
ꢀ
45
50
ꢀ
soldering star 25
ꢀ
30
39
7
8
10
11
ꢀ
ꢀ
9
ꢀ
Useful life
Requirements:
∆C/C ≤ ±30% of initial value
ESR ≤ 3 times initial specified limit
Ileak ≤ initial specified limit
*)
150 °C, Vop, 0.5 ꢁ IAC,R
> 2000 h
> 2000 h
> 5000 h
> 15000 h
> 500000 h
140 °C, VR, 0.6 ꢁ IAC,R
125 °C, VR, IAC, R
85 °C, VR,IAC, max
40 °C, VR, 2 ꢁ IAC, R
*)
V :see useful life graph
op
Voltage endurance test
Post test requirements:
125 °C, VR
2000 h
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% initial specified limit
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 1.5 mm, at 10 Hz ... 2 kHz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1:
55/125/56 (ꢀ55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d × l
dmax × Imax
Approx. weight
Packing units (pcs.)
mm
mm
g
Pallet
288
200
200
180
180
160
160
140
140
110
Reel
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 30.5
16.5 × 40
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
5.1
450
350
350
250
ꢀ
5.7
6.8
8.9
11.7
11.1
14.7
13.5
20.0
25.0
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Soldering star capacitors
Dimensional drawing
Dimensions, weights and packing units
d × l
d
max × Imax
c ±0.1
mm
Approx. weight
Packing units
pcs.
mm
mm
g
12 × 30
14 × 25
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 32
17.5 × 41.5
19.5 × 32
19.5 × 41.5
12.5
14.5
14.5
16.5
16.5
18.5
18.5
5.4
6.1
7.2
9.4
12.2
11.8
15.4
480
480
480
300
200
300
200
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Overview of available types
VR (V DC)
25
40
63
Case dimensions d × l (mm)
CR (µF)
220
12 × 30
14 × 30
16 × 30
330
470
12 × 30
14 × 30
680
12 × 30
14 × 25
16 × 39
18 × 30
1000
1100
1500
16 × 30
18 × 39
20 × 29
14 × 30
16 × 39
18 × 30
1800
2200
21 × 39
21 × 49
16 × 39
18 × 30
18 × 39
20 × 29
3300
18 × 39
20 × 29
21 × 39
4400
5000
6800
21 × 49
21 × 39
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Case dimensions and ordering codes
VR
CR
100 Hz
20 °C
Case
Ordering code
Ordering code
Axial reel
Ordering code
Soldering star
dimensions Axial pallet
d × l
V DC µF
680
mm
25
40
63
12 × 30
14 × 25
14 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
16 × 39
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
B41692A5687Q007 B41692A5687Q009 B41792A5687Q000
B41692A5108Q007 B41692A5108Q009 B41792A5108Q000
B41692A5158Q007 B41692A5158Q009 B41792A5158Q000
1000
1500
2200
2200
3300
3300
5000
6800
470
B41692A5228Q007
B41692B5228Q007
B41692A5338Q007
B41692B5338Q007
B41692A5508Q007
B41692A5688Q007
B41792A5228Q000
B41792B5228Q000
B41792A5338Q000
B41692A7477Q007 B41692A7477Q009 B41792A7477Q000
B41692A7687Q007 B41692A7687Q009 B41792A7687Q000
B41692A7108Q007 B41692A7108Q009 B41792A7108Q000
680
1000
1500
1500
2200
2200
3300
4400
220
B41692A7158Q007
B41692B7158Q007
B41692A7228Q007
B41692B7228Q007
B41692A7338Q007
B41692A7448Q007
B41792A7158Q000
B41792B7158Q000
B41792A7228Q000
B41692A8227Q007 B41692A8227Q009 B41792A8227Q000
B41692A8337Q007 B41692A8337Q009 B41792A8337Q000
B41692A8477Q007 B41692A8477Q009 B41792A8477Q000
330
470
680
680
1000
1100
1800
2200
B41692A8687Q007
B41692B8687Q007
B41692A8108Q007
B41692A8118Q007
B41692A8188Q007
B41692A8228Q007
B41792A8687Q000
B41792B8687Q000
B41792A8108Q000
Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Technical data
CR ESRtyp ESRmax ESRmax ESRmax Zmax
IAC,max IAC,max IAC,max IAC,R
IAC,max
100 Hz 100 Hz 100 Hz 100 Hz 10 kHz 100 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz
20 °C
µF
20 °C 20 °C ꢀ40 °C 20 °C 20 °C
85 °C 105 °C 125 °C 125 °C 140 °C
mΩ
mΩ
mΩ
mΩ
mΩ
A
A
A
A
A
VR = 25 V DC
680
1000
1500
2200
2200
3300
3300
5000
6800
150
100
70
50
48
32
33
22
17
250
170
120
82
79
53
55
37
28
1600
1200
800
550
550
360
360
240
180
165
120
82
55
52
35
38
27
20
155
112
77
50
48
33
36
27
20
4.5
4.8
6.2
9.2
9.1
12.7
10.6
15.0
19.0
3.8
4.1
5.3
7.9
7.8
10.8
9.1
12.9
16.3
2.85 1.95
1.25
1.4
1.8
2.6
2.6
3.6
3.0
4.3
5.4
3.1
4.0
5.9
5.8
8.1
6.8
9.6
12.1
2.1
2.75
4.05
4.0
5.5
4.6
6.6
8.3
VR = 40 V DC
470
680
145
105
73
49
46
32
34
23
18
240
170
120
80
77
53
55
39
30
1400
1000
660
450
450
300
300
200
160
135
95
70
50
45
30
33
23
18
128
90
67
48
43
29
32
23
18
4.9
6.0
6.9
9.6
9.7
13.3
10.9
15.4
19.4
4.2
5.1
5.9
8.2
8.3
11.4
9.3
13.1
16.6
3.1
3.8
4.4
6.1
6.1
8.5
6.9
9.8
12.3
2.15
2.6
3.0
4.2
4.2
5.8
4.8
6.7
8.5
1.4
1.7
2.0
2.7
2.7
3.8
3.1
4.4
5.5
1000
1500
1500
2200
2200
3300
4400
VR = 63 V DC
220
330
470
680
680
1000
1100
1800
2200
210
140
105
71
69
50
48
30
25
350
240
170
120
114
78
75
47
38
1600
1100
750
500
500
350
330
220
175
145
100
75
55
50
35
36
23
19
138
95
72
53
48
34
35
23
19
4.7
5.9
6.8
9.4
9.4
13.0
10.9
15.5
19.3
4.0
5.0
5.8
8.0
8.0
11.1
9.3
13.2
16.5
3.0
3.7
4.3
6.0
6.0
8.2
6.9
9.8
12.3
2.05
2.55
3.0
4.1
4.1
5.7
4.8
6.7
8.5
1.35
1.7
2.0
2.7
2.7
3.7
3.1
4.4
5.5
Variant with different case dimensions
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Useful life
1)
depending on ambient temperature TA under ripple current operating conditions at VR
Useful life
1)
depending on case temperature TC under ripple current operating conditions at VR
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Useful life
2)
depending on ambient temperature TA under ripple current operating conditions at Vop
VR = 25 V: Vop ≤ 20 V;
VR = 40 V: Vop ≤ 35 V;
VR = 63 V: Vop ≤ 55 V
Useful life
2)
depending on case temperature TC under ripple current operating conditions at Vop
VR = 25 V: Vop ≤ 20 V;
VR = 40 V: Vop ≤ 35 V;
VR = 63 V: Vop ≤ 55 V
2) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Frequency factor of permissible ripple
Frequency characteristics of ESR
current IAC versus frequency f
Typical behavior
Equivalent series resistance ESR
versus frequency f
Impedance Z
versus frequency f
Typical behavior for 2200 µF/25 V
Typical behavior for 2200 µF/25 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 16
B41692, B41792
Long useful life, compact ꢀ up to 140 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 16 of 16
相关型号:
B41692A5478Q007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 4700uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
B41692A5608Q007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 6000uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
B41692A7308Q007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 40V, 3000uF, THROUGH HOLE MOUNT, AXIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明