B41851K4477M000 概述
Single-ended capacitors 单端电容器
B41851K4477M000 数据手册
通过下载B41851K4477M000数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type:
B41851, B43851
Date:
December 2006
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors
B41851, B43851
Standard series ꢀ 105 °C
General-purpose grade capacitors
Applications
General-purpose applications in the entertainment industry
Semi-professional to professional application range
For filtering, coupling and pulse circuits
Switched-mode power supplies
Features
Compact dimensions
High CV product, i.e. very compact
Construction
Radial leads
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Minus pole marking on the insulating sleeve
Case with safety vent from diameter 6.3 mm
Delivery mode
Terminal configurations and packing:
Bulk
Taped, Ammo pack
Cut
Kinked
PAPR (protection against polarity reversal):
crimped leads, J leads, bent leads
Refer to chapter "Single-ended capacitors ꢀ Taping, packing
and lead configurations" for further details and ordering
example.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 36
B41851, B43851
Standard series ꢀ 105 °C
Specifications and characteristics in brief
Series
B41851
B43851
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
6.3 ... 100 V DC
1.15 ꢁ VR
160 ... 450 V DC
1.1 ꢁ VR
0.1 ... 10000 µF
±20% ꢂ M
0.47 ... 560 µF
±20% ꢂ M
Dissipation factor tan δ
(20 °C, 120 Hz)
For capacitance higher than 1000 µF add 0.02 for every increase of
1000 µF.
VR (V DC)
6.3 10 16 25 35 50 63 100 160 ...
450
tan δ (max.)
0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.10 0.20
Leakage current Ileak
(20 °C, 5 min)
or 3 µA, whichever is greater
Self-inductance ESL
Diameter (mm) ≤ 6.3
8 ... 12.5 16
18
34
20 ...
25
ESL (nH)
15
20
26
40
Useful life
105 °C, VR, IAC,R
40 °C, VR, 1.8 ꢁ IAC,R
40 °C, VR, 2.1 ꢁ IAC,R
> 2000 h
> 250000 h
ꢀ
> 3000 h
ꢀ
> 250000 h
Requirements
∆C/C
tan δ
Ileak
≤ ±45% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Voltage endurance test
105 °C, VR
1000 h
1000 h
Post test requirements
∆C/C
tan δ
Ileak
≤ ±30% of initial value
≤ 2 times initial specified limit
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 0.75 mm, frequency range 10 ... 2000 Hz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor rigidly clamped by the aluminum case.
IEC climatic category
Sectional specification
To IEC 60068-1:
V
V
R ≤ 250 V: 40/105/56 (ꢀ40 °C/+105 °C/56 days damp heat test)
R ≥ 350 V: 25/105/56 (ꢀ25 °C/+105 °C/56 days damp heat test)
IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 36
B41851, B43851
Standard series ꢀ 105 °C
Dimensional drawings
With stand-off rubber seal
Diameters (mm):
6.3, 8, 10, 12.5, 16, 18, 22, 25
With flat rubber seal
Diameters (mm):
5, 8, 20
Safety vent for diameter ≥6.3 mm.
Dimensions and weights
Dimensions (mm)
Approx. weight
g
d +0.5
5
l
a ±0.5
2.0
b
11 +1.0
11 +1.0
11.5 +1.5
12.5 +1.0
16 +1.0
20 +2.0
20 +2.0
25 +2.0
20 +2.0
25 +2.0
31.5 +2.0
31.5 +2.0
35 +2.0
40 +2.0
30 +2.0
35 +2.0
40 +2.0
35 +2.0
40 +2.0
40 +2.0
0.50 ±0.05
0.50 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
1.0 ±0.1
0.5
6.3
8
2.5
0.7
3.5
1.0
10
5.0
1.6
10
5.0
1.9
10
5.0
2.6
12.5
12.5
16
5.0
3.6
5.0
4.5
7.5
5.5
16
7.5
7.5
16
7.5
7.8
18
7.5
11.0
13.0
16.0
14.0
18.0
20.0
21.0
23.0
25.0
18
7.5
18
7.5
20
10.0
10.0
10.0
10.0
10.0
12.5
20
1.0 ±0.1
20
1.0 ±0.1
22
1.0 ±0.1
22
1.0 ±0.1
25
1.0 ±0.1
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 36
B41851
Standard series ꢀ 105 °C
Overview of available types ꢀ B41851
Other voltage and capacitance ratings are available upon request.
VR (V DC)
6.3
10
16
25
5
Case dimensions d × l (mm)
CR (µF)
47
× 11
68
5
5
× 11
× 11
100
150
220
270
330
5
× 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
8
8
8
× 11.5
8
8
× 11.5
× 11.5
× 11.5
8
× 11.5
× 11.5
10 × 12.5
10 × 12.5
10 × 16
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
470
560
8
8
× 11.5
× 11.5
8
8
× 11.5
× 11.5
8
× 11.5
10 × 12.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
680
10 × 12.5
10 × 12.5
10 × 16
10 × 20
10 × 20
10 × 12.5
10 × 12.5
10 × 20
10 × 20
12.5 × 25
1000
1500
2200
3300
12.5 × 25
16 × 25
4700
6800
12.5 × 25
16 × 20
16 × 25
16 × 25
16 × 31.5
18 × 35
16 × 31.5
18 × 31.5
8200
16 × 31.5
18 × 31.5
18 × 31.5
18 × 35
18 × 40
20 × 40
10000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 36
B41851
Standard series ꢀ 105 °C
VR (V DC)
35
50
63
100
Case dimensions d × l (mm)
CR (µF)
0.10
0.22
0.33
0.47
0.68
1.0
5
5
5
5
5
5
5
5
5
5
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
5
× 11
1.5
2.2
5
5
5
× 11
× 11
× 11
3.3
4.7
6.8
5
5
5
× 11
× 11
× 11
10
5
5
× 11
× 11
6.3 × 11
22
8
× 11.5
6.3 × 11
6.3 × 11
6.3 × 11
33
47
5
5
× 11
× 11
6.3 × 11
6.3 × 11
10 × 12.5
10 × 12.5
8
8
8
× 11.5
68
100
150
220
270
330
470
6.3 × 11
6.3 × 11
6.3 × 11
× 11.5
× 11.5
10 × 16
10 × 20
12.5 × 25
12.5 × 25
16 × 25
16 × 25
16 × 31.5
8
8
× 11.5
× 11.5
8
8
× 11.5
× 11.5
10 × 12.5
10 × 16
10 × 20
10 × 20
10 × 12.5
10 × 16
10 × 16
10 × 20
10 × 12.5
10 × 12.5
10 × 16
12.5 × 20
12.5 × 25
560
680
10 × 20
10 × 20
12.5 × 20
12.5 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16 × 31.5
18 × 40
20 × 40
1000
16 × 25
16 × 31.5
1500
2200
16 × 20
16 × 25
16 × 25
18 × 31.5
16 × 31.5
18 × 35
18 × 35
18 × 40
3300
4700
6800
16 × 31.5
18 × 35
18 × 40
18 × 35
20 × 40
20 × 40
25 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 36
B43851
Standard series ꢀ 105 °C
Overview of available types ꢀ B43851
Other voltage and capacitance ratings are available upon request.
VR (V DC)
160
200
250
350
400
450
Case dimensions d × l (mm)
CR (µF)
0.47
0.68
1.0
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
1.5
8
8
× 11.5
× 11.5 10 × 12.5 10 × 12.5
2.2
3.3
8
8
× 11.5 10 × 12.5 10 × 12.5 10 × 16
4.7
8
× 11.5
× 11.5 10 × 12.5 10 × 16
10 × 16
10 × 20
6.8
10
8
8
× 11.5 10 × 12.5 10 × 12.5 10 × 16
10 × 16
10 × 20
10 × 20
× 11.5 10 × 12.5 10 × 12.5 10 × 20
10 × 16
10 × 20
12.5 × 25
22
33
10 × 12.5 10 × 16
10 × 20
12.5 × 25
12.5 × 25
16 × 25
12.5 × 25
16 × 20
16 × 25
12.5 × 25
16 × 25
10 × 16
10 × 20
10 × 20
10 × 16
10 × 20
12.5 × 20
16 × 25
16 × 31.5
47
12.5 × 20
12.5 × 25
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16 × 31.5
16 × 31.5 18 × 31.5
68
12.5 × 25
16 × 20
12.5 × 25
16 × 20
16 × 25
18 × 31.5 18 × 31.5 18 × 35
18 × 35
100
12.5 × 25
16 × 25
16 × 25
16 × 31.5 18 × 35
20 × 30
20 × 35
20 × 40
150
220
16 × 31.5 18 × 31.5 18 × 40
20 × 40
20 × 40
16 × 31.5 18 × 35
18 × 31.5
18 × 40
22 × 35
22 × 40
270
330
18 × 35
18 × 40
20 × 35
18 × 35
20 × 30
22 × 35
470
560
22 × 35
22 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 36
B41851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B41851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 6.3 V DC
220
270
330
470
560
6.3 × 11
6.3 × 11
6.3 × 11
2.1
1.7
1.4
1.0
0.83
0.68
0.46
0.31
0.23
0.16
0.12
1.6
1.3
1.1
1.5
1.2
1.0
160
175
195
225
B41851A2227M***
B41851A2277M***
B41851A2337M***
B41851A2477M***
B41851A2567M***
B41851A2687M***
B41851A2108M***
B41851F2158M***
B41851A2228M***
B41851A2338M***
B41851A2478M***
245
275
370
405
505
635
735
995
1175
1570
8
8
× 11.5
× 11.5
0.77
0.64
0.52
0.35
0.24
0.18
0.12
0.09
0.71 265
0.59 290
0.49 360
0.33 455
0.22 525
0.16 710
0.11 840
0.09 1120
680
10 × 12.5
10 × 12.5
10 × 16
10 × 20
10 × 20
12.5 × 25
1000
1500
2200
3300
4700
VR = 10 V DC
100
150
220
270
330
470
560
680
1000
1500
2200
3300
4700
6800
8200
10000
5
× 11
6.3 × 11
6.3 × 11
6.3 × 11
4.0
2.7
1.8
1.5
3.1
2.1
1.4
1.2
2.90 105
1.90 115
1.30 175
1.10 180
0.86 220
0.61 280
0.51 290
0.42 330
0.29 460
0.19 510
0.14 760
0.10 1085
0.08 1190
0.06 1575
0.06 1610
0.05 1820
150
160
245
250
310
390
405
460
645
B41851A3107M***
B41851A3157M***
B41851A3227M***
B41851A3277M***
B41851A3337M***
B41851A3477M***
B41851B3567M***
B41851A3687M***
B41851A3108M***
B41851A3158M***
B41851A3228M***
B41851A3338M***
B41851A3478M***
B41851F3688M***
B41851F3828M***
B41851F3109M***
8
8
8
× 11.5
× 11.5
× 11.5
1.2
0.92
0.65
0.55
0.45
0.31
0.21
0.15
0.11
0.08
0.06
0.06
0.05
0.85
0.71
0.59
0.40
0.27
0.20
0.14
0.11
0.08
0.08
0.07
10 × 12.5
10 × 12.5
10 × 20
10 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 31.5
715
1065
1520
1665
2205
2255
2250
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 36
B41851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B41851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 16 V DC
68
100
150
220
270
330
470
560
680
1000
1500
2200
3300
3300
4700
6800
6800
8200
10000
5
5
× 11
× 11
4.9
3.3
2.2
1.5
1.2
1.0
0.71
0.59
0.49
0.33
0.22
0.17
0.12
0.12
0.09
0.07
0.07
0.07
0.06
3.8
2.6
1.7
1.2
3.50
70
100
160
175
265
275
370
440
505
545
B41851A4686M***
B41851A4107M***
B41851A4157M***
B41851F4227M***
B41851A4277M***
B41851A4337M***
B41851K4477M***
B41851A4567M***
B41851F4687M***
B41851A4108M***
B41851F4158M***
B41851F4228M***
B41851F4338M***
B41851A4338M***
B41851A4478M***
B41851F4688M***
B41851A4688M***
B41851F4828M***
B41851F4109M***
2.40 115
1.60 125
1.10 190
0.88 195
0.72 265
0.50 315
0.42 360
0.35 390
0.24 560
0.16 650
0.12 920
0.09 1170
0.09 1260
0.07 1500
0.05 1600
0.05 1680
0.05 1700
0.04 1950
6.3 × 11
6.3 × 11
8
8
8
10 × 12.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 25
16 × 31.5
18 × 31.5
18 × 31.5
18 × 35
× 11.5
× 11.5
× 11.5
0.94
0.77
0.54
0.46
0.38
0.26
0.17
0.13
0.09
0.09
0.07
0.06
0.06
0.05
0.05
785
910
1290
1640
1765
2100
2240
2350
2380
2730
VR = 25 V DC
47
100
150
220
270
330
330
470
5
× 11
6.3 × 11
6.3 × 11
5.6
2.7
1.8
1.2
4.3
2.0
1.4
0.93
0.76
0.62
0.62
0.43
4.0
1.9
1.3
0.86 240
0.70 250
0.57 310
0.57 320
0.40 380
83
140
145
116
195
205
335
350
435
450
530
B41851A5476M***
B41851A5107M***
B41851F5157M***
B41851A5227M***
B41851A5277M***
B41851F5337M***
B41851A5337M***
B41851F5477M***
8
8
8
× 11.5
× 11.5
× 11.5
1.0
0.80
0.80
0.56
10 × 12.5
10 × 12.5
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 36
B41851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B41851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 25 V DC
560
680
10 × 16
0.47
0.36
0.34 400
0.28 440
0.19 680
0.13 770
0.10 1090
0.07 1400
0.06 1700
0.05 1850
0.04 1900
0.04 2050
560
615
950
1080
1525
1960
2380
2590
2660
2870
B41851A5567M***
B41851F5687M***
B41851A5108M***
B41851F5158M***
B41851F5228M***
B41851A5338M***
B41851A5478M***
B41851F5688M***
B41851F5828M***
B41851F5109M***
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35
18 × 40
20 × 40
0.39
0.27
0.18
0.14
0.10
0.08
0.06
0.06
0.06
0.30
0.20
0.14
0.10
0.08
0.06
0.05
0.05
0.04
1000
1500
2200
3300
4700
6800
8200
10000
VR = 35 V DC
33
47
68
5
5
× 11
× 11
7.0
4.9
3.4
2.3
1.5
1.1
0.86
0.70
0.49
0.41
0.34
0.23
0.15
0.12
0.09
0.07
0.06
5.40
3.80
2.60
1.80
1.20
0.81
0.66
0.54
0.38
0.32
0.26
0.18
0.12
0.09
0.07
0.05
0.05
5.0
3.5
2.4
1.7
1.1
0.75 270
0.61 300
0.50 350
0.35 460
0.30 540
0.24 590
0.17 810
0.11 980
0.09 1260
0.06 1500
0.05 1780
0.04 2000
75
93
110
150
210
105
130
155
210
295
380
420
490
645
B41851A7336M***
B41851A7476M***
B41851A7686M***
B41851F7107M***
B41851A7157M***
B41851F7227M***
B41851A7277M***
B41851A7337M***
B41851A7477M***
B41851A7567M***
B41851A7687M***
B41851F7108M***
B41851F7158M***
B41851F7228M***
B41851F7338M***
B41851K7478M***
B41851K7688M***
6.3 × 11
6.3 × 11
8
8
100
150
220
270
330
470
560
680
1000
1500
2200
3300
4700
6800
× 11.5
× 11.5
10 × 12.5
10 × 12.5
10 × 16
10 × 20
10 × 20
12.5 × 20
16 × 20
16 × 25
16 × 31.5
18 × 35
18 × 40
755
825
1135
1370
1765
2100
2490
2800
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 36
B41851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B41851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 50 V DC
1
5
× 11
× 11
× 11
× 11
× 11
× 11
199
90
60
42
20
9.0
6.0
4.2
2.9
153
69
46
32
15
7.0
4.6
3.3
2.3
142
64
43
30
14
13
20
25
30
46
67
90
115
150
190
18
28
35
42
65
B41851A6105M***
B41851A6225M***
B41851A6335M***
B41851A6475M***
B41851A6106M***
B41851A6226M***
B41851A6336M***
B41851A6476M***
B41851F6686M***
B41851A6107M***
B41851F6157M***
B41851A6227M***
B41851A6277M***
B41851A6337M***
B41851A6477M***
B41851F6567M***
B41851F6687M***
B41851F6108M***
B41851F6158M***
B41851F6228M***
B41851A6228M***
B41851K6338M***
B41851K6478M***
2.2
3.3
4.7
10
22
33
5
5
5
5
5
6.5
94
6.3 × 11
6.3 × 11
6.3 × 11
8
8
10 × 12.5
10 × 16
10 × 16
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35
18 × 35
20 × 40
4.3
3.0
2.1
1.4
126
160
210
265
295
420
505
575
755
910
980
1330
1765
1975
2155
2480
2940
47
68
100
150
220
270
330
470
560
680
1000
1500
2200
2200
3300
4700
× 11.5
× 11.5
2.0
1.3
1.5
1.0
0.95 210
0.65 300
0.53 360
0.43 410
0.30 540
0.25 651
0.21 700
0.14 950
0.09 1260
0.08 1410
0.08 1540
0.06 1770
0.05 2100
0.90
0.74
0.60
0.42
0.36
0.29
0.20
0.13
0.11
0.11
0.08
0.06
0.70
0.57
0.46
0.33
0.27
0.23
0.15
0.10
0.08
0.08
0.06
0.05
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 36
B41851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B41851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 63 V DC
6.8
10
5
5
5
× 11
× 11
× 11
29
20
9.0
9.0
6.0
4.2
4.2
2.9
2.0
23
15
7.0
7.0
4.6
3.3
3.3
2.3
1.5
21
14
6.5
6.5
4.3
3.0
3.0
2.1
1.4
0.95 250
0.65 335
0.53 410
0.43 510
0.30 640
0.30 655
0.25 700
0.21 770
0.14 930
0.14 980
0.09 1260
0.08 1650
0.08 1650
0.06 1950
0.05 2250
35
46
70
50
65
100
110
140
170
185
220
280
350
470
575
715
895
920
980
1080
1300
1375
1765
2310
2310
2730
3150
B41851A8685M***
B41851A8106M***
B41851F8226M***
B41851A8226M***
B41851A8336M***
B41851F8476M***
B41851A8476M***
B41851F8686M***
B41851F8107M***
B41851F8157M***
B41851A8227M***
B41851A8277M***
B41851A8337M***
B41851F8477M***
B41851A8477M***
B41851F8567M***
B41851F8687M***
B41851F8108M***
B41851A8108M***
B41851F8158M***
B41851A8228M***
B41851F8228M***
B41851A8338M***
B41851F8478M***
22
22
33
6.3 × 11
6.3 × 11
6.3 × 11
77
100
120
130
155
200
47
47
68
8
8
8
× 11.5
× 11.5
× 11.5
100
150
220
270
330
470
470
560
680
1000
1000
1500
2200
2200
3300
4700
10 × 12.5
10 × 16
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 31.5
18 × 35
18 × 40
20 × 40
25 × 40
1.3
1.0
0.90
0.74
0.60
0.42
0.42
0.36
0.29
0.20
0.20
0.13
0.11
0.11
0.08
0.06
0.70
0.57
0.46
0.33
0.33
0.27
0.23
0.15
0.15
0.10
0.08
0.08
0.06
0.05
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 36
B41851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B41851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 100 V DC
0.1
0.22
0.33
0.47
0.68
1
1.5
2.2
3.3
4.7
10
22
33
47
68
100
150
220
270
330
470
560
680
1000
5
5
5
5
5
5
5
5
5
5
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
1658
754
502
353
244
166
111
75
50
35
17
7.5
1275
580
386
271
188
128
85
58
39
27
13
1184
538
359
252
174
118
79
54
36
25
12
1.5
3.4
5.0
7.1
9.1
15
17
21
29
32
53
98
2.1 B41851A9104M***
4.8 B41851A9224M***
7.0 B41851A9334M***
10
13
B41851A9474M***
B41851A9684M***
B41851A9105M***
B41851A9155M***
B41851A9225M***
B41851A9335M***
B41851A9475M***
B41851A9106M***
B41851A9226M***
B41851A9336M***
B41851B9476M***
B41851A9686M***
B41851A9107M***
B41851A9157M***
B41851A9227M***
B41851A9277M***
B41851A9337M***
B41851A9477M***
B41851A9567M***
B41851F9687M***
B41851A9108M***
21
24
30
41
45
6.3 × 11
8
74
× 11.5
5.8
3.9
2.7
1.9
5.4
137
190
225
275
345
540
610
755
785
980
1030
1080
1370
10 × 12.5
10 × 12.5
10 × 16
10 × 20
12.5 × 25
12.5 × 25
16 × 25
16 × 25
16 × 31.5
16 × 31.5
18 × 40
20 × 40
5.0
3.5
2.4
1.7
3.6
2.5
1.7
1.2
0.79 385
0.54 435
0.44 540
0.36 560
0.25 700
0.21 735
0.17 770
0.12 980
135
160
195
245
1.3
1.1
0.85
0.58
0.47
0.39
0.27
0.23
0.19
0.13
0.75
0.61
0.50
0.35
0.30
0.24
0.17
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 36
B43851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B43851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 160 V DC
0.47
0.68
1
1.5
2.2
3.3
4.7
6.8
10
22
22
33
33
6.3 × 11
395
273
186
124
85
56
40
27
18
296
205
139
93
63
42
30
21
14
9.5
6.3
5.6
4.2
3.4
3.0
2.1
2.1
1.7
1.4
158
109
74
50
34
22
16
11
7.4
5.0
3.4
3.0
2.2
1.8
1.6
1.1
1.1
11
13
16
21
23
28
35
46
56
19
22
27
36
39
48
60
78
95
155
184
213
243
320
345
417
434
510
564
714
904
952
1071
1131
1182
1190
1547
1785
B43851A1474M***
B43851A1684M***
B43851A1105M***
B43851A1155M***
B43851A1225M***
B43851A1335M***
B43851F1475M***
B43851A1685M***
B43851F1106M***
B43851F1226M***
B43851A1226M***
B43851F1336M***
B43851A1336M***
B43851F1476M***
B43851A1476M***
B43851F1686M***
B43851A1686M***
B43851F1107M***
B43851A1107M***
B43851A1157M***
B43851F1227M***
B43851A1227M***
B43851F1277M***
B43851A1277M***
B43851F1337M***
B43851A1337M***
B43851A1477M***
B43851A1567M***
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
8
8
× 11.5
× 11.5
10 × 12.5
10 × 16
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
12.5 × 25
16 × 25
16 × 31.5
16 × 31.5
18 × 31.5
18 × 35
18 × 40
18 × 35
20 × 30
22 × 35
22 × 40
13
91
8.4
7.5
5.6
4.5
4.0
2.7
2.7
2.3
1.8
1.2
108
125
143
188
203
245
255
300
332
420
532
560
630
665
695
700
910
47
47
68
68
100
100
150
220
220
270
270
330
330
470
560
0.92
0.74
0.49
0.38
0.34
0.30
0.27
0.28
0.22
0.16
0.92
0.95
0.71
0.63
0.56
0.50
0.53
0.42
0.30
0.25
0.84
0.75
0.67
0.70
0.56
0.40
0.33
0.13 1050
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 36
B43851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B43851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 200 V DC
0.47
0.68
1
1.5
2.2
3.3
4.7
6.8
10
22
22
33
47
47
68
68
100
150
220
270
330
6.3 × 11
395
273
186
124
85
56
40
27
18
8.4
8.4
5.6
4.5
4.0
3.3
3.3
1.8
1.2
296
205
139
93
63
42
30
21
14
6.3
6.3
4.2
3.4
3.0
2.5
2.5
1.4
158
109
74
50
34
22
16
11
7.4
3.4
3.4
2.2
1.8
1.6
1.3
1.3
11
13
16
21
23
28
38
55
66
108
120
144
190
203
245
255
332
448
539
637
742
19
22
27
36
39
48
65
94
112
184
204
245
323
345
417
434
564
762
916
1083
1261
B43851A2474M***
B43851A2684M***
B43851A2105M***
B43851A2155M***
B43851A2225M***
B43851A2335M***
B43851A2475M***
B43851A2685M***
B43851B2106M***
B43851K2226M***
B43851A2226M***
B43851B2336M***
B43851K2476M***
B43851A2476M***
B43851K2686M***
B43851A2686M***
B43851A2107M***
B43851A2157M***
B43851A2227M***
B43851A2277M***
B43851A2337M***
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
8
× 11.5
10 × 12.5
10 × 12.5
10 × 16
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16 × 25
18 × 31.5
18 × 35
20 × 35
22 × 35
0.74
0.92
0.49
0.34
0.27
0.22
0.84
0.67
0.56
0.63
0.50
0.42
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 36
B43851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B43851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 250 V DC
0.47
0.68
1
1.5
2.2
3.3
4.7
6.8
10
10
22
33
47
6.3 × 11
395
273
186
124
85
56
40
27
23
296
205
139
93
63
42
30
21
17
14
6.3
4.2
3.2
3.0
2.1
1.4
158
109
74
50
34
22
16
11
9.0
7.4
3.4
2.2
1.7
1.6
1.1
11
13
16
21
23
35
38
55
66
19
22
27
36
39
60
65
94
112
126
204
274
345
357
452
619
731
809
964
1119
B43851F2474M***
B43851F2684M***
B43851F2105M***
B43851F2155M***
B43851F2225M***
B43851F2335M***
B43851K2475M***
B43851F2685M***
B43851K2106M***
B43851F2106M***
B43851F2226M***
B43851K2336M***
B43851G2476M***
B43851F2476M***
B43851F2686M***
B43851K2107M***
B43851F2157M***
B43851F2227M***
B43851F2277M***
B43851F2337M***
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
8
8
× 11.5
× 11.5
10 × 12.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 40
18 × 40
22 × 35
22 × 40
18
74
8.4
5.6
4.3
4.0
2.7
1.8
1.2
0.84
0.67
0.56
120
161
203
210
266
364
430
476
567
658
47
68
100
150
220
270
330
0.74
0.92
0.49
0.34
0.27
0.22
0.63
0.50
0.42
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 36
B43851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B43851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 350 V DC
0.47
0.68
1
1.5
2.2
3.3
4.7
6.8
10
22
33
47
68
6.3 × 11
6.3 × 11
6.3 × 11
395
273
186
296
205
139
93
63
42
30
21
14
6.3
4.2
3.0
2.1
1.7
1.4
158
109
74
50
34
22
16
11
7.4
3.4
2.2
1.6
1.1
0.90
0.74
0.49
10
12
15
22
26
38
45
60
81
140
168
210
294
364
371
490
17
20
26
37
44
B43851A4474M***
B43851A4684M***
B43851A4105M***
B43851A4155M***
B43851A4225M***
B43851A4335M***
B43851A4475M***
B43851A4685M***
B43851A4106M***
B43851A4226M***
B43851F4336M***
B43851F4476M***
B43851A4686M***
B43851F4107M***
B43851A4107M***
B43851A4157M***
8
8
× 11.5 124
× 11.5
85
56
40
27
10 × 12.5
10 × 12.5
10 × 16
10 × 20
12.5 × 25
12.5 × 25
16 × 25
18 × 31.5
18 × 35
20 × 30
20 × 40
65
77
102
138
238
286
357
500
619
631
833
18
8.4
5.6
4.0
2.7
2.3
1.8
1.2
100
100
150
0.92
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 36
B43851
Standard series ꢀ 105 °C
Technical data and ordering codes ꢀ B43851
CR
Case
ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz
20 °C
µF
dimensions 120 Hz 10 kHz 100 kHz 120 Hz 120 Hz (composition see
d × l
20 °C
20 °C
20 °C
105 °C 85 °C
mA mA
below)
mm
Ω
Ω
Ω
VR = 400 V DC
2.2
3.3
4.7
6.8
10
22
33
47
47
68
68
10 × 12.5
85
56
40
27
63
42
30
21
34
22
16
11
7.4
3.4
2.2
1.6
1.6
1.3
1.1
32
38
49
60
80
140
168
196
210
294
310
322
420
54
65
83
B43851A9225M***
B43851A9335M***
B43851A9475M***
B43851A9685M***
B43851A9106M***
B43851F9226M***
B43851F9336M***
B43851F9476M***
B43851A9476M***
B43851F9686M***
B43851A9686M***
B43851A9107M***
B43851A9157M***
10 × 12.5
10 × 16
10 × 16
10 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 31.5
18 × 35
20 × 35
20 × 40
102
136
238
286
333
357
500
527
547
714
18
14
8.4
5.6
4.0
4.0
3.3
2.7
1.8
1.2
6.3
4.2
3.0
3.0
2.4
2.1
1.4
100
150
0.74
0.49
0.92
VR = 450 V DC
2.2
3.3
4.7
4.7
6.8
10
10
22
22
33
33
47
10 × 12.5
85
56
40
40
27
26
18
14
8.4
7.6
5.6
4.8
4.0
2.7
1.8
63
42
30
30
21
19
14
10
34
24
32
35
40
53
41
54
60
68
90
B43851A5225M***
B43851A5335M***
B43851F5475M***
B43851A5475M***
B43851A5685M***
B43851F5106M***
B43851A5106M***
B43851F5226M***
B43851A5226M***
B43851F5336M***
B43851A5336M***
B43851F5476M***
B43851A5476M***
B43851A5686M***
B43851A5107M***
10 × 16
10 × 16
10 × 20
10 × 20
10 × 20
12.5 × 25
12.5 × 25
16 × 25
16 × 25
16 × 31.5
16 × 31.5
18 × 31.5
18 × 35
20 × 40
22
16
16
11
10
56
63
95
7.4
107
170
196
213
226
264
315
328
352
5.4
3.4
3.0
2.2
1.9
1.6
1.1
0.74
100
115
125
133
155
185
193
207
6.3
5.7
4.2
3.6
3.0
2.1
1.4
47
68
100
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 6.3 × 11 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 36
B41851, B43851
Standard series ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
VR = 6.3 ... 100 V DC
VR = 160 ... 450 V DC
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 36
B41851, B43851
Standard series ꢀ 105 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency factor of permissible ripple
current IAC versus frequency f
V
R ≤ 100 V DC
VR ≥ 160 V DC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 36
B41851, B43851
Standard series ꢀ 105 °C
Taping, packing and lead configurations
Taping
Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows:
Lead spacing F = 2.5 mm ( d = 5 … 6.3 mm)
Lead spacing F = 3.5 mm ( d = 8 mm)
Lead spacing F = 5.0 mm ( d = 5 … 12.5 mm)
Lead spacing F = 7.5 mm ( d = 16 ... 18 mm).
Lead spacing 2.5 mm ( d = 5 ... 6.3 mm)
Last 3 digits of ordering code: 007
Dimensions in mm
d
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
5
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0
6.3
Toler-
ance
+0.8
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
ꢀ02
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 36
B41851, B43851
Standard series ꢀ 105 °C
Lead spacing 3.5 mm ( d = 8 mm)
Last 3 digits of ordering code: 006
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆h
D0
8
3.5
18.5 18.0 12.5 9.0
12.7 12.7 4.6
1.0
0.7
1.0
4.0
Toler-
ance
+0.8
ꢀ02
1.0
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 36
B41851, B43851
Standard series ꢀ 105 °C
Lead spacing 5.0 mm ( d = 5 ... 8 mm)
Last 3 digits of ordering code: 008
Lead spacing 5.0 mm ( d = 10 ... 12.5 mm)
Last 3 digits of ordering code: 008
Dimensions in mm
d
F
H
W
W0 W1 W2
H0
P
P0
P1
I1
t
∆h
D0
5
5.0
18.5 18.0 5.5 9.0 1.5
16.0 12.7 12.7 3.85 1.0
0.7 1.0
4.0
6.3
8
20.0
16.0 12.7 12.7 3.85
10
5.0
19.0 18.0 12.5 9.0 1.5
19.0
ꢀ
ꢀ
12.7 12.7 3.85 1.0
15.0 15.0 5.0
0.7 1.0
4.0
12.5
Toler-
ance
+0.8
ꢀ02
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 36
B41851, B43851
Standard series ꢀ 105 °C
Lead spacing 7.5 mm ( d = 16 ...18 mm)
Last 3 digits of ordering code: 009
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆P ∆h D0
4.0
16
18 *)
7.5 18.5 18.0 12.5 9.0
30.0 15.0 3.75 1.0
0.7
0
0
Toler-
ance
ꢀ0.5
+0.75
±0.8
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 ±1.0 ±1.0 ±0.2
*) Available only for case dimensions 18 × 20, 18 × 25 and 18 × 31.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 36
B41851, B43851
Standard series ꢀ 105 °C
Packing units and box dimensions
Ammo pack
Case size
d × l
Dimensions (mm)
Packing
units
mm
Amax
345
345
345
345
345
345
345
345
345
345
315
315
315
315
315
315
Bmax
55
55
55
55
60
60
65
65
65
65
65
65
65
65
65
65
Cmax
240
290
240
280
200
200
280
280
280
275
275
275
275
275
275
275
pcs.
5 × 11
2000
2000
1000
750
500
500
500
500
500
500
300
300
300
250
250
250
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
12.5 × 30
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 36
B41851, B43851
Standard series ꢀ 105 °C
Kinked or cut leads
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also
available upon request.
Kinked leads
Last 3 digits of ordering code: 001
With stand-off rubber seal
Case size
d × l (mm)
10 × 20
Dimensions (mm)
a ±0.5
5.0
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
5.0
5.0
5.0
5.0
5.0
7.5
16 × 25
7.5
16 × 31.5
18 × 20
7.5
7.5
18 × 25
7.5
18 × 31.5
18 × 35
7.5
With flat rubber seal
7.5
18 × 40
7.5
20 × 20
10.0
10.0
10.0
10.0
10.0
10.0
20 × 25
20 × 40
22 × 30
22 × 35
22 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 36
B41851, B43851
Standard series ꢀ 105 °C
Cut leads
Last 3 digits of ordering code: 002
With stand-off rubber seal
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
a ±0.5
5.0
5.0
10 × 20
5.0
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
5.0
5.0
5.0
With flat rubber seal
5.0
5.0
7.5
16 × 25
7.5
16 × 31.5
18 × 20
7.5
7.5
18 × 25
7.5
18 × 31.5
18 × 35
7.5
7.5
18 × 40
7.5
20 × 20
10.0
10.0
10.0
20 × 25
20 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 36
B41851, B43851
Standard series ꢀ 105 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 20 mm.
There are three configurations available: Crimped leads, J leads, bent 90° leads
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 40
Dimensions (mm)
B ±0.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
C ±0.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
D ±0.1
E ±0.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
a ±0.5
b
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.6
1.6
1.6
7.5
7.5
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 36
B41851, B43851
Standard series ꢀ 105 °C
J leads
Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
C ±0.5
3.2
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.5
3.5
3.5
E ±0.5
J ±0.2
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 36
B41851, B43851
Standard series ꢀ 105 °C
Bent 90° leads for horizontal mounting pinning
Last 3 digits of ordering code: 012
Case size
d × l (mm)
16 × 20
Dimensions (mm)
C ±0.5
4.0
E ±0.5
F ±0.5
12.0
12.0
12.0
13.0
13.0
13.0
13.0
13.0
a ±0.5
7.5
b
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
16 × 25
4.0
7.5
16 × 31.5
18 × 20
4.0
7.5
4.0
7.5
18 × 25
4.0
7.5
18 × 31.5
18 × 35
4.0
7.5
4.0
7.5
18 × 40
4.0
7.5
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 36
B41851, B43851
Standard series ꢀ 105 °C
Overview of packing units and code numbers for case sizes 5 × 11 ... 16 × 31.5
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads Bent 90°
leads,
bulk
leads, leads
leads,
blister
bulk
pcs.
ꢀ
mm
pcs.
pcs.
pcs.
pcs.
ꢀ
pcs.
ꢀ
pcs.
5 × 11
2000 2000
2500 2000
1000 1000
1000 750
ꢀ
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
16 × 25
16 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1000
1000
500
350
500
175
175
175
200
200
250
002
ꢀ
675
675
500
300
225
180
150
150
200
200
344
004
100
500
350
250
200
175
175
250
250
200
500
ꢀ
ꢀ
500
500
350
500
175
175
175
200
200
250
001
ꢀ
1)
1)
1)
1)
1)
500
ꢀ
500
ꢀ
500
ꢀ
-
ꢀ
-
ꢀ
300
200
200
344
003
120
120
120
012
300
300
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
006
007
008
009
3.5
2.5
5
8
5...6.3
5...12.5
16...18
7.5
1) Available upon request
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 36
B41851, B43851
Standard series ꢀ 105 °C
Overview of packing units and code numbers for case sizes 18 × 20 ... 25 × 40
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads Bent 90°
leads,
bulk
leads, leads
leads,
blister
bulk
pcs.
175
150
100
100
100
125
125
100
100
100
100
100
100
ꢀ
mm
pcs.
175
150
100
100
125
125
125
100
100
100
80
pcs.
pcs.
175
150
100
100
100
125
125
100
100
100
100
100
100
100
001
pcs.
200
200
150
150
120
200
200
120
120
120
ꢀ
pcs.
200
200
150
150
ꢀ
pcs.
120
120
120
150
72
ꢀ
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
22 × 30
22 × 35
22 × 40
25 × 40
250
250
250
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
40
ꢀ
ꢀ
ꢀ
ꢀ
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
002
003
004
012
007
008
009
2.5
5
7.5
4...6.3
6.3...12.5
16...18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 36
B41851, B43851
Standard series ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 36
B41851, B43851
Standard series ꢀ 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 34 of 36
B41851, B43851
Standard series ꢀ 105 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 35 of 36
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 36 of 36
B41851K4477M000 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
B41851K4477M001 | EPCOS | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount, RADIAL LEADED, CAN | 获取价格 | |
B41851K4477M002 | EPCOS | Aluminum electrolytic capacitors | 获取价格 | |
B41851K4477M003 | EPCOS | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16V, 470uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN | 获取价格 | |
B41851K4477M004 | EPCOS | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16V, 470uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN | 获取价格 | |
B41851K4477M009 | EPCOS | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 16V, 470uF, THROUGH HOLE MOUNT, RADIAL LEADED, CAN | 获取价格 | |
B41851K4477M012 | EPCOS | Aluminum electrolytic capacitors | 获取价格 | |
B41851K6338M000 | EPCOS | Single-ended capacitors | 获取价格 | |
B41851K6338M008 | EPCOS | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 3300uF, Through Hole Mount, RADIAL LEADED, CAN | 获取价格 | |
B41851K6478M000 | EPCOS | Single-ended capacitors | 获取价格 | |
B41851K6478M001 | EPCOS | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 4700uF, Through Hole Mount, RADIAL LEADED, CAN | 获取价格 |
B41851K4477M000 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6