B41853W6108M004 [EPCOS]
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount, RADIAL LEADED;
| 型号： | B41853W6108M004 |
| 厂家： | 
EPCOS |
| 描述： | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount, RADIAL LEADED |
| 文件： | 总24页 (文件大小：644K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type:
B41853
Date:
December 2006
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors
B41853
For airbag applications ꢀ 105 °C
Long-life grade capacitors
Applications
Automotive electronics: energy reserve for airbag application
Features
Compact design
High CV product
Designed for severe charge and discharge conditions
Construction
Radial leads
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Minus pole marking on the insulating sleeve
Stand-off rubber seal
Case with safety vent
Delivery mode
Terminal configurations and packing:
Bulk
Taped, Ammo pack
Cut
Kinked
PAPR (protection against polarity reversal):
crimped leads, J leads, bent leads
Refer to chapter "Single-ended capacitors ꢀ Taping, packing
and lead configurations" for further details and ordering
example.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 24
B41853
For airbag applications ꢀ 105 °C
Specifications and characteristics in brief
Rated voltage VR
25 ... 50 V DC
1.15 ꢁ VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
470 ... 6800 µF
±20% ꢂ M
Dissipation factor tan δ
(20 °C, 120 Hz)
For capacitance higher than 1000 µF add 0.02 for every increase of
1000 µF.
VR (V DC)
25
35
50
tan δ (max.)
0.16
0.14
0.12
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
Diameter (mm)
ESL (nH)
≤ 12.5
16
26
18
34
20
Useful life
105 °C, VR, IAC,R
> 3000 h
Requirements
∆C/C
tan δ
Ileak
≤ ±35% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Voltage endurance test
105 °C, VR
3000 h
Post test requirements
∆C/C
tan δ
Ileak
≤ ±25% of initial value
≤ 2 times initial specified limit
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 0.75 mm, frequency range 10 … 2000 Hz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor rigidly clamped by the aluminum case.
IEC climatic category
Sectional specification
To IEC 60068-1:
55/105/56 (ꢀ55 °C/+105 °C/56 days damp heat test)
AEC-Q200, IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 24
B41853
For airbag applications ꢀ 105 °C
Dimensional drawing
With stand-off rubber seal
Diameters (mm): 10, 12.5, 16, 18
Dimensions and weights
Dimensions (mm)
Approx. weight
d +0.5
10
l
a ±0.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
g
20 +2.0
20 +2.0
25 +2.0
20 +2.0
25 +2.0
31.5 +2.0
20 +2.0
25 +2.0
31.5 +2.0
35 +2.0
40 +2.0
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
2.6
3.6
4.5
5.5
7.5
7.8
8.9
9.0
11.0
13.0
16.0
12.5
12.5
16
16
16
18
18
18
18
18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 24
B41853
For airbag applications ꢀ 105 °C
Overview of available types
VR (V DC)
25
35
50
Case dimensions d × l (mm)
CR (µF)
470
10 × 20
10 × 20
12.5 × 20
12.5 × 20
12.5 × 20
16 × 20
16 × 25
16 × 25
18 × 20
18 × 25
18 × 31.5
18 × 31.5
18 × 35
18 × 40
12.5 × 20
12.5 × 25
16 × 20
18 × 20
18 × 20
18 × 25
18 × 31.5
18 × 31.5
18 × 35
18 × 40
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
18 × 20
18 × 25
16 × 31.5
18 × 31.5
18 × 35
18 × 40
Other voltage and capacitance ratings are available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 24
B41853
For airbag applications ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
below)
Ω
Ω
Ω
Ω
mA
mA
VR = 25 V DC
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
10 × 20 1.265 0.202 0.158 0.136
12.5 × 20 0.781 0.168 0.098 0.085
12.5 × 25 0.715 0.135 0.089 0.078
12.5 × 25 0.715 0.112 0.089 0.078
16 × 20 0.666 0.103 0.083 0.075
18 × 20 0.483 0.084 0.060 0.054
18 × 25 0.399 0.077 0.050 0.045
16 × 31.5 0.426 0.065 0.053 0.048
18 × 31.5 0.373 0.059 0.047 0.042
18 × 35 0.318 0.050 0.040 0.036
18 × 40 0.224 0.040 0.028 0.026
1200
1700
2000
2000
2000
2500
3400
3400
3600
4100
5100
1560
2210
2600
2600
2600
3250
4420
4420
4680
5330
6630
B41853W5108M***
B41853W5128M***
B41853W5158M***
B41853W5188M***
B41853W5228M***
B41853W5278M***
B41853W5338M***
B41853W5398M***
B41853W5478M***
B41853W5568M***
B41853W5688M***
VR = 35 V DC
470
560
680
10 × 20 1.265 0.376 0.158 0.136
1100
1100
1600
1600
1600
2000
2300
2300
2800
2500
3200
3200
3700
4200
1430
1430
2080
2080
2080
2600
2990
2990
3640
3250
4160
4160
4810
5460
B41853W7477M***
B41853W7567M***
B41853W7687M***
B41853W7827M***
B41853W7108M***
B41853W7128M***
B41853W7158M***
B41853W7188M***
B41853W7228M***
B41853W7278M***
B41853W7338M***
B41853W7398M***
B41853W7478M***
B41853W7568M***
10 × 20 1.265 0.316 0.158 0.136
12.5 × 20 0.781 0.260 0.098 0.085
12.5 × 20 0.781 0.216 0.098 0.085
12.5 × 20 0.781 0.177 0.098 0.085
16 × 20 0.666 0.147 0.083 0.075
16 × 25 0.559 0.118 0.070 0.063
16 × 25 0.559 0.098 0.070 0.063
18 × 20 0.483 0.090 0.060 0.054
18 × 25 0.399 0.075 0.050 0.045
18 × 31.5 0.373 0.069 0.047 0.042
18 × 31.5 0.373 0.058 0.047 0.042
18 × 35 0.318 0.050 0.040 0.036
18 × 40 0.224 0.040 0.028 0.026
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
Composition of ordering code
*** = Version
012 = for bent 90° leads, blister (for 16 and 18 mm)
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 20 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for d × l = 10 × 20 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 24
B41853
For airbag applications ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
below)
Ω
Ω
Ω
Ω
mA
mA
VR = 50 V DC
470
560
680
12.5 × 20 0.781 0.323 0.098 0.085
12.5 × 25 0.715 0.271 0.089 0.078
16 × 20 0.666 0.223 0.083 0.075
18 × 20 0.537 0.185 0.067 0.060
18 × 20 0.537 0.152 0.067 0.060
18 × 25 0.399 0.126 0.050 0.045
18 × 31.5 0.373 0.101 0.047 0.042
18 × 31.5 0.373 0.084 0.047 0.042
18 × 35 0.318 0.080 0.040 0.036
18 × 40 0.224 0.065 0.028 0.026
1170
1500
1350
1850
1850
2200
2600
2600
2900
3500
1521
1950
1755
2405
2405
2860
3380
3380
3770
4550
B41853W6477M***
B41853W6567M***
B41853W6687M***
B41853W6827M***
B41853W6108M***
B41853W6128M***
B41853W6158M***
B41853W6188M***
B41853R6228M***
B41853W6278M***
820
1000
1200
1500
1800
2200
2700
Composition of ordering code
*** = Version
012 = for bent 90° leads, blister (for 16 and 18 mm)
000 = for standard leads, bulk
001 = for kinked leads, bulk (for ≥ 10 mm)
002 = for cut leads, bulk (for ≥ 10 mm)
003 = for crimped leads, blister (for ≥ 16 mm)
004 = for J leads, blister (from d × l = 10 × 20 mm to 18 × 35 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for d × l = 10 × 20 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 24
B41853
For airbag applications ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Frequency factor of permissible ripple current IAC versus frequency f
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 24
B41853
For airbag applications ꢀ 105 °C
Taping, packing and lead configurations
Taping
Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows:
Lead spacing F = 2.5 mm ( d = 5 … 6.3 mm)
Lead spacing F = 3.5 mm ( d = 8 mm)
Lead spacing F = 5.0 mm ( d = 5 … 12.5 mm)
Lead spacing F = 7.5 mm ( d = 16 ... 18 mm).
Lead spacing 2.5 mm ( d = 5 ... 6.3 mm)
Last 3 digits of ordering code: 007
Dimensions in mm
d
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
5
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0
6.3
Toler-
ance
+0.8
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
ꢀ02
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 24
B41853
For airbag applications ꢀ 105 °C
Lead spacing 3.5 mm ( d = 8 mm)
Last 3 digits of ordering code: 006
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆h
D0
8
3.5
18.5 18.0 12.5 9.0
12.7 12.7 4.6
1.0
0.7
1.0
4.0
Toler-
ance
+0.8
ꢀ02
1.0
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 24
B41853
For airbag applications ꢀ 105 °C
Lead spacing 5.0 mm ( d = 5 ... 8 mm)
Last 3 digits of ordering code: 008
Lead spacing 5.0 mm ( d = 10 ... 12.5 mm)
Last 3 digits of ordering code: 008
Dimensions in mm
d
F
H
W
W0 W1 W2
H0
P
P0
P1
I1
t
∆h
D0
5
5.0
18.5 18.0 5.5 9.0 1.5
16.0 12.7 12.7 3.85 1.0
0.7 1.0
4.0
6.3
8
20.0
16.0 12.7 12.7 3.85
10
5.0
19.0 18.0 12.5 9.0 1.5
19.0
ꢀ
ꢀ
12.7 12.7 3.85 1.0
15.0 15.0 5.0
0.7 1.0
4.0
12.5
Toler-
ance
+0.8
ꢀ02
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 24
B41853
For airbag applications ꢀ 105 °C
Lead spacing 7.5 mm ( d = 16 ...18 mm)
Last 3 digits of ordering code: 009
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆P ∆h D0
4.0
16
18 *)
7.5 18.5 18.0 12.5 9.0
30.0 15.0 3.75 1.0
0.7
0
0
Toler-
ance
ꢀ0.5
+0.75
±0.8
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 ±1.0 ±1.0 ±0.2
*) Available only for case dimensions 18 × 20, 18 × 25 and 18 × 31.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 24
B41853
For airbag applications ꢀ 105 °C
Packing units and box dimensions
Ammo pack
Case size
d × l
Dimensions (mm)
Packing
units
mm
Amax
345
345
345
345
345
345
345
345
345
345
315
315
315
315
315
315
Bmax
55
55
55
55
60
60
65
65
65
65
65
65
65
65
65
65
Cmax
240
290
240
280
200
200
280
280
280
275
275
275
275
275
275
275
pcs.
5 × 11
2000
2000
1000
750
500
500
500
500
500
500
300
300
300
250
250
250
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
12.5 × 30
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 24
B41853
For airbag applications ꢀ 105 °C
Kinked or cut leads
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also
available upon request.
Kinked leads
Last 3 digits of ordering code: 001
With stand-off rubber seal
Case size
d × l (mm)
10 × 20
Dimensions (mm)
a ±0.5
5.0
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
5.0
5.0
5.0
5.0
5.0
7.5
16 × 25
7.5
16 × 31.5
18 × 20
7.5
7.5
18 × 25
7.5
18 × 31.5
18 × 35
7.5
With flat rubber seal
7.5
18 × 40
7.5
20 × 20
10.0
10.0
10.0
10.0
10.0
10.0
20 × 25
20 × 40
22 × 30
22 × 35
22 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 24
B41853
For airbag applications ꢀ 105 °C
Cut leads
Last 3 digits of ordering code: 002
With stand-off rubber seal
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
a ±0.5
5.0
5.0
10 × 20
5.0
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
5.0
5.0
5.0
With flat rubber seal
5.0
5.0
7.5
16 × 25
7.5
16 × 31.5
18 × 20
7.5
7.5
18 × 25
7.5
18 × 31.5
18 × 35
7.5
7.5
18 × 40
7.5
20 × 20
10.0
10.0
10.0
20 × 25
20 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 24
B41853
For airbag applications ꢀ 105 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 20 mm.
There are three configurations available: Crimped leads, J leads, bent 90° leads
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 40
Dimensions (mm)
B ±0.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
C ±0.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
D ±0.1
E ±0.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
a ±0.5
b
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.6
1.6
1.6
7.5
7.5
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 24
B41853
For airbag applications ꢀ 105 °C
J leads
Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
C ±0.5
3.2
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.5
3.5
3.5
E ±0.5
J ±0.2
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 24
B41853
For airbag applications ꢀ 105 °C
Bent 90° leads for horizontal mounting pinning
Last 3 digits of ordering code: 012
Case size
d × l (mm)
16 × 20
Dimensions (mm)
C ±0.5
4.0
E ±0.5
F ±0.5
12.0
12.0
12.0
13.0
13.0
13.0
13.0
13.0
a ±0.5
7.5
b
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
16 × 25
4.0
7.5
16 × 31.5
18 × 20
4.0
7.5
4.0
7.5
18 × 25
4.0
7.5
18 × 31.5
18 × 35
4.0
7.5
4.0
7.5
18 × 40
4.0
7.5
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 24
B41853
For airbag applications ꢀ 105 °C
Overview of packing units and code numbers for case sizes 5 × 11 ... 16 × 31.5
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads Bent 90°
leads,
bulk
leads, leads
leads,
blister
bulk
pcs.
ꢀ
mm
pcs.
pcs.
pcs.
pcs.
ꢀ
pcs.
ꢀ
pcs.
5 × 11
2000 2000
2500 2000
1000 1000
1000 750
ꢀ
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
16 × 25
16 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1000
1000
500
350
500
175
175
175
200
200
250
002
ꢀ
675
675
500
300
225
180
150
150
200
200
344
004
100
500
350
250
200
175
175
250
250
200
500
ꢀ
ꢀ
500
500
350
500
175
175
175
200
200
250
001
ꢀ
1)
1)
1)
1)
1)
500
ꢀ
500
ꢀ
500
ꢀ
-
ꢀ
-
ꢀ
300
200
200
344
003
120
120
120
012
300
300
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
006
007
008
009
3.5
2.5
5
8
5...6.3
5...12.5
16...18
7.5
1) Available upon request
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 24
B41853
For airbag applications ꢀ 105 °C
Overview of packing units and code numbers for case sizes 18 × 20 ... 25 × 40
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads Bent 90°
leads,
bulk
leads, leads
leads,
blister
bulk
pcs.
175
150
100
100
100
125
125
100
100
100
100
100
100
ꢀ
mm
pcs.
175
150
100
100
125
125
125
100
100
100
80
pcs.
pcs.
175
150
100
100
100
125
125
100
100
100
100
100
100
100
001
pcs.
200
200
150
150
120
200
200
120
120
120
ꢀ
pcs.
200
200
150
150
ꢀ
pcs.
120
120
120
150
72
ꢀ
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
22 × 30
22 × 35
22 × 40
25 × 40
250
250
250
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
40
ꢀ
ꢀ
ꢀ
ꢀ
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
002
003
004
012
007
008
009
2.5
5
7.5
4...6.3
6.3...12.5
16...18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 24
B41853
For airbag applications ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 24
B41853
For airbag applications ꢀ 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 24
B41853
For airbag applications ꢀ 105 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 24
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 24 of 24
相关型号：
B41853W6108M008
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount, RADIAL LEADED
EPCOS
B41853W6108M009
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount, RADIAL LEADED
EPCOS
B41853W6128M002
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1200uF, Through Hole Mount, RADIAL LEADED
EPCOS
B41853W6128M003
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1200uF, Through Hole Mount, RADIAL LEADED
EPCOS
B41853W6128M004
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1200uF, Through Hole Mount, RADIAL LEADED
EPCOS
B41853W6128M008
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 50V, 1200uF, THROUGH HOLE MOUNT, RADIAL LEADED
EPCOS
B41853W6128M009
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1200uF, Through Hole Mount, RADIAL LEADED
EPCOS
©2020 ICPDF网 联系我们和版权申明