B41888C7187M000 [EPCOS]
Aluminum electrolytic capacitors; 铝电解电容器
| 型号： | B41888C7187M000 |
| 厂家： | 
EPCOS |
| 描述： | Aluminum electrolytic capacitors |
| 文件： | 总32页 (文件大小：603K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type:
B41888
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors
B41888
Extended useful life ꢀ 105 °C
Long-life grade capacitors
Very low impedance
Applications
Automotive electronics
For use in switch-mode power supplies
For professional industrial electronics, telecommunications
and data processing equipment
Features
Long useful life
Very low impedance at high frequency
High ripple current capability
RoHS-compatible
Construction
Radial leads
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Minus pole marking on the insulating sleeve
Case with safety vent
Delivery mode
Terminal configurations and packing:
Bulk
Taped, Ammo pack
Cut
Kinked
PAPR (protection against polarity reversal):
crimped leads, J leads, bent leads
Refer to chapter "Single-ended capacitors ꢀ Taping, packing
and lead configurations" for further details and ordering
example.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 32
B41888
Extended useful life ꢀ 105 °C
Specifications and characteristics in brief
Rated voltage VR
10 ... 63 V DC
1.15 ꢁ VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
56 ... 10000 µF
±20% ꢂ M
Dissipation factor tan δ
(20 °C, 120 Hz)
For capacitance higher than 1000 µF add 0.02 for every increase of
1000 µF.
VR (V DC)
10
16
25
35
50
63
tan δ (max.)
0.18
0.16
0.14
0.12
0.10
0.09
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
Diameter (mm)
ESL (nH)
≤12.5 16
20 26
18
34
Useful life
105 °C; VR; IAC,R
> 5000 h for d = 8 mm
> 7000 h for d = 10 mm
> 10000 h for d ≥ 12.5 mm
Requirements
∆C/C
tan δ
Ileak
≤ ±40% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Voltage endurance test
105 °C; VR
5000 h for d = 8 mm
7000 h for d = 10 mm
10000 h for d ≥ 12.5 mm
Post test requirements
∆C/C
tan δ
Ileak
≤ ±30% of initial value
≤ 2 times initial specified limit
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Displacement amplitude 1.5 mm, frequency range 10 … 2000 Hz,
acceleration max. 20 g, duration 3 × 2 h.
Capacitor rigidly clamped by the aluminum case.
IEC climatic category
Sectional specification
To IEC 60068-1:
55/105/56 (ꢀ55 °C/+105 °C/56 days damp heat test)
AEC-Q200, IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 32
B41888
Extended useful life ꢀ 105 °C
Dimensional drawings
With stand-off rubber seal
With flat rubber seal
Diameters (mm): 10, 12.5, 16, 18
Diameter (mm): 8
Dimensions and weights
Dimensions (mm)
Approx. weight
d +0.5
8
l
a ±0.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
g
11.5 +1.5
12.5 +1.0
16 +1.0
20 +2.0
20 +2.0
25 +2.0
40 +2.0
20 +2.0
25 +2.0
31.5 +2.0
20 +2.0
25 +2.0
31.5 +2.0
35 +2.0
40 +2.0
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.60 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.05
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
0.80 ±0.1
1.0
1.6
1.9
2.6
3.6
4.5
7.4
5.5
7.5
7.8
8.0
9.0
11.0
13.0
16.0
10
10
10
12.5
12.5
12.5
16
16
16
18
18
18
18
18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 32
B41888
Extended useful life ꢀ 105 °C
Overview of available types
VR (V DC)
10
16
25
35
50
63
Case dimensions d × l (mm)
CR (µF)
56
8
8
× 11.5
× 11.5
68
82
10 × 12.5
× 11.5 10 × 12.5
× 11.5 10 × 16
100
120
150
180
220
270
330
390
470
560
680
8
8
8
× 11.5 10 × 12.5 10 × 16
10 × 12.5
10 × 20
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 20
8
8
× 11.5 10 × 12.5 10 × 16
× 11.5 10 × 12.5 10 × 20
8
8
× 11.5 10 × 12.5 10 × 16
× 11.5 10 × 12.5
10 × 20
8
× 11.5 10 × 12.5 10 × 16
10 × 20
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
10 × 12.5 10 × 16
10 × 12.5 10 × 16
10 × 16
10 × 20
12.5 × 40
16 × 25
18 × 20
820
10 × 16
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 31.5
18 × 25
1000
10 × 16
10 × 20
10 × 20
10 × 20
12.5 × 40
16 × 25
18 × 20
1200
12.5 × 20
16 × 20
16 × 31.5 18 × 31.5
18 × 25
1500
1800
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16 × 31.5 18 × 35
18 × 31.5 18 × 40
12.5 × 40
16 × 25
18 × 20
2200
2700
3300
3900
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
12.5 × 25
16 × 20
18 × 20
16 × 31.5 18 × 35
18 × 25
12.5 × 40
16 × 25
16 × 31.5 18 × 40
16 × 31.5 18 × 31.5
18 × 25
12.5 × 40
16 × 25
18 × 20
18 × 31.5 18 × 35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 32
B41888
Extended useful life ꢀ 105 °C
VR (V DC)
10
16
25
35
50
63
Case dimensions d × l (mm)
CR (µF)
4700
16 × 25
16 × 31.5 18 × 35
18 × 25
18 × 40
5600
6800
12.5 × 40
16 × 25
18 × 20
18 × 31.5 18 × 40
16 × 31.5
18 × 25
8200
18 × 31.5 18 × 35
18 × 35 18 × 40
10000
Other voltage and capacitance ratings are available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 32
B41888
Extended useful life ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
VR = 10 V DC
470
560
680
8
× 11.5 1.630 0.484 0.204 0.183
690
900
900
966
B41888C3477M***
B41888C3567M***
B41888C3687M***
B41888C3827M***
B41888C3108M***
B41888C3128M***
B41888C3158M***
B41888C3188M***
B41888D3228M***
B41888C3278M***
B41888C3338M***
B41888C3398M***
B41888C3478M***
B41888C3568M***
B41888D3568M***
B41888E3568M***
B41888C3688M***
B41888D3688M***
B41888C3828M***
B41888C3109M***
10 × 12.5 0.928 0.406 0.116 0.101
10 × 12.5 0.930 0.334 0.116 0.101
1260
1260
1736
1736
2100
2100
2100
2800
3443
3442
3542
4102
4690
4102
4200
5040
4755
5946
6020
820
10 × 16
10 × 16
10 × 20
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
16 × 25
12.5 × 40
16 × 25
18 × 20
0.512 0.277 0.064 0.059
0.516 0.227 0.064 0.059
0.403 0.189 0.050 0.046
0.400 0.152 0.050 0.046
0.400 0.126 0.050 0.046
0.328 0.115 0.041 0.039
0.240 0.094 0.030 0.027
0.237 0.084 0.030 0.027
0.233 0.071 0.029 0.026
0.190 0.065 0.024 0.022
0.149 0.059 0.019 0.017
0.190 0.059 0.024 0.022
0.226 0.059 0.028 0.025
1240
1240
1500
1500
1500
2000
2459
2459
2530
2930
3350
2930
3000
3600
3396
4247
4300
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
5600
5600
6800
6800
8200
10000
16 × 31.5 0.154 0.052 0.019 0.017
18 × 25 0.188 0.052 0.023 0.021
18 × 31.5 0.143 0.049 0.018 0.016
18 × 35 0.120 0.045 0.015 0.014
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding 12.5 × 40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 32
B41888
Extended useful life ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
VR = 16 V DC
330
390
470
560
680
8
8
× 11.5 1.630 0.612 0.204 0.183
× 11.5 1.632 0.518 0.204 0.183
690
690
900
966
B41888C4337M***
B41888C4397M***
B41888C4477M***
B41888C4567M***
B41888C4687M***
B41888C4108M***
B41888C4128M***
B41888D4158M***
B41888C4188M***
B41888C4228M***
B41888C4278M***
B41888C4398M***
B41888D4398M***
B41888E4398M***
B41888C4478M***
B41888D4478M***
B41888C4568M***
B41888C4828M***
B41888C4109M***
966
1260
1736
1736
2100
2100
2800
3443
3442
3542
4690
4102
4200
5040
4480
5946
6020
7457
10 × 12.5 0.930 0.430 0.116 0.101
10 × 16
10 × 16
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
12.5 × 40
16 × 25
18 × 20
0.512 0.361 0.064 0.059
0.516 0.297 0.064 0.059
0.403 0.202 0.050 0.046
0.400 0.168 0.050 0.046
0.328 0.135 0.041 0.039
0.240 0.112 0.030 0.027
0.237 0.103 0.030 0.027
0.233 0.084 0.029 0.026
0.149 0.065 0.019 0.017
0.190 0.065 0.024 0.022
0.226 0.065 0.028 0.025
1240
1240
1500
1500
2000
2459
2459
2530
3350
2930
3000
3600
3200
4247
4300
5327
1000
1200
1500
1800
2200
2700
3900
3900
3900
4700
4700
5600
8200
10000
16 × 31.5 0.154 0.059 0.019 0.017
18 × 25 0.188 0.059 0.023 0.021
18 × 31.5 0.143 0.054 0.018 0.016
18 × 35
18 × 40
0.120 0.043 0.015 0.014
0.100 0.040 0.013 0.012
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding 12.5 × 40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 32
B41888
Extended useful life ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
VR = 25 V DC
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
2700
3300
3300
3900
4700
5600
8
8
× 11.5 1.630 0.804 0.204 0.183
× 11.5 1.632 0.655 0.204 0.183
690
690
900
966
B41888C5227M***
B41888C5277M***
B41888C5337M***
B41888C5397M***
B41888C5477M***
B41888C5567M***
B41888C5687M***
B41888C5827M***
B41888D5108M***
B41888C5128M***
B41888C5158M***
B41888C5188M***
B41888C5228M***
B41888C5278M***
B41888D5278M***
B41888C5338M***
B41888D5338M***
B41888C5398M***
B41888C5478M***
B41888C5568M***
966
1260
1260
1736
1736
2100
2100
2800
2800
3442
3542
4200
4690
4102
5040
4480
5946
6020
7457
10 × 12.5 0.930 0.536 0.116 0.101
10 × 12.5 0.928 0.453 0.116 0.101
900
10 × 16
10 × 16
10 × 20
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 20
18 × 20
12.5 × 40
16 × 25
0.516 0.376 0.064 0.059
0.512 0.316 0.064 0.059
0.403 0.260 0.050 0.046
0.400 0.216 0.050 0.046
0.328 0.177 0.041 0.039
0.328 0.147 0.041 0.039
0.237 0.118 0.030 0.027
0.233 0.098 0.029 0.026
0.226 0.090 0.028 0.025
0.149 0.075 0.019 0.017
0.190 0.075 0.024 0.022
1240
1240
1500
1500
2000
2000
2459
2530
3000
3350
2930
3600
3200
4247
4300
5327
16 × 31.5 0.154 0.069 0.019 0.017
18 × 25 0.188 0.069 0.023 0.021
18 × 31.5 0.143 0.058 0.018 0.016
18 × 35
18 × 40
0.120 0.054 0.015 0.014
0.100 0.050 0.013 0.012
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding 12.5 × 40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 32
B41888
Extended useful life ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
VR = 35 V DC
150
180
220
270
330
470
560
680
820
1000
1200
1800
1800
1800
2200
2200
2700
3300
3900
4700
8
× 11.5 1.630 1.011 0.204 0.183
690
900
900
966
B41888C7157M***
B41888C7187M***
B41888C7227M***
B41888C7277M***
B41888C7337M***
B41888C7477M***
B41888C7567M***
B41888D7687M***
B41888C7827M***
B41888C7108M***
B41888C7128M***
B41888C7188M***
B41888D7188M***
B41888E7188M***
B41888C7228M***
B41888D7228M***
B41888D7278M***
B41888D7338M***
B41888D7398M***
B41888C7478M***
10 × 12.5 0.928 0.842 0.116 0.101
10 × 12.5 0.930 0.689 0.116 0.101
10 × 12.5 0.928 0.561 0.116 0.101
1260
1260
1260
1736
2100
2100
2100
2800
3442
3542
4690
4102
4200
5040
4480
5040
5946
6020
7458
900
10 × 16
10 × 20
10 × 20
10 × 20
12.5 × 20
12.5 × 25
16 × 20
12.5 × 40
16 × 25
18 × 20
0.516 0.459 0.064 0.059
0.403 0.323 0.050 0.046
0.400 0.271 0.050 0.046
0.400 0.223 0.050 0.046
0.328 0.185 0.041 0.039
0.237 0.152 0.030 0.027
0.233 0.126 0.029 0.026
0.149 0.084 0.019 0.017
0.190 0.084 0.024 0.022
0.226 0.084 0.028 0.025
1240
1500
1500
1500
2000
2459
2530
3350
2930
3000
3600
3200
3600
4247
4300
5327
16 × 31.5 0.154 0.080 0.019 0.017
18 × 25 0.188 0.080 0.023 0.021
16 × 31.5 0.152 0.065 0.019 0.017
18 × 31.5 0.144 0.061 0.018 0.016
18 × 35
18 × 40
0.120 0.052 0.015 0.014
0.104 0.048 0.013 0.012
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding 12.5 × 40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 32
B41888
Extended useful life ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
VR = 50 V DC
100
120
150
220
270
330
470
560
680
8
8
× 11.5 4.920 1.263 0.615 0.540
× 11.5 4.920 1.053 0.615 0.540
500
500
600
700
700
840
B41888C6107M***
B41888C6127M***
B41888D6157M***
B41888C6227M***
B41888C6277M***
B41888C6337M***
B41888C6477M***
B41888C6567M***
B41888C6687M***
B41888C6827M***
B41888C6108M***
B41888D6108M***
B41888G6108M***
B41888C6128M***
B41888D6128M***
B41888C6158M***
B41888C6188M***
B41888C6228M***
B41888C6278M***
10 × 12.5 1.824 0.842 0.228 0.203
10 × 16
10 × 20
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 20
12.5 × 40
16 × 25
18 × 20
1.030 0.574 0.129 0.115
0.672 0.468 0.084 0.075
0.672 0.383 0.084 0.075
0.518 0.269 0.065 0.060
0.344 0.226 0.043 0.040
0.344 0.186 0.043 0.040
0.410 0.154 0.051 0.046
0.216 0.126 0.027 0.025
0.283 0.126 0.035 0.032
0.312 0.126 0.039 0.036
1050
1180
1180
1800
2024
2024
1957
2920
2700
2541
3010
2795
3010
3542
3800
4000
1470
1652
1652
2520
2834
2834
2740
4088
3780
3557
4214
3914
4214
4959
5320
5600
820
1000
1000
1000
1200
1200
1500
1800
2200
2700
16 × 31.5 0.221 0.105 0.028 0.025
18 × 25 0.275 0.105 0.034 0.031
16 × 31.5 0.224 0.084 0.028 0.025
18 × 31.5 0.204 0.070 0.025 0.023
18 × 35
18 × 40
0.177 0.069 0.022 0.020
0.159 0.056 0.020 0.018
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding 12.5 × 40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 32
B41888
Extended useful life ꢀ 105 °C
Technical data and ordering codes
CR Case ESRmax ESRmax ESRmax Zmax
IAC,R
IAC,max
Ordering code
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see
20 °C
µF
d × l
mm
ꢀ40 °C 20 °C 20 °C 20 °C
105 °C 85 °C
mA mA
below)
Ω
Ω
Ω
Ω
VR = 63 V DC
56
68
82
8
8
× 11.5 5.413 2.030 0.541 0.488
× 11.5 4.328 1.672 0.541 0.488
283
283
323
323
474
474
644
644
800
396
396
453
452
664
664
901
902
1120
1120
1428
1625
1625
2281
2045
1823
2674
2217
2932
3313
3792
B41888C8566M***
B41888C8686M***
B41888C8826M***
B41888C8107M***
B41888C8127M***
B41888C8157M***
B41888C8187M***
B41888C8227M***
B41888C8277M***
B41888C8337M***
B41888C8397M***
B41888C8477M***
B41888C8567M***
B41888C8687M***
B41888D8687M***
B41888E8687M***
B41888C8827M***
B41888D8827M***
B41888C8128M***
B41888C8158M***
B41888C8188M***
10 × 12.5 5.766 1.386 0.577 0.500
10 × 12.5 4.616 1.137 0.577 0.500
100
120
150
180
220
270
330
390
470
560
680
680
680
820
820
1200
1500
1800
10 × 16
10 × 16
10 × 20
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 20
12.5 × 40
16 × 25
18 × 20
3.075 0.947 0.308 0.279
2.464 0.758 0.308 0.279
1.986 0.632 0.199 0.180
1.592 0.517 0.199 0.180
1.688 0.421 0.169 0.153
1.688 0.344 0.169 0.153
1.236 0.291 0.124 0.112
1.037 0.242 0.104 0.094
0.832 0.203 0.104 0.094
0.717 0.167 0.072 0.065
0.772 0.167 0.077 0.070
0.960 0.167 0.096 0.087
800
1020
1161
1161
1629
1460
1302
1910
1584
2094
2366
2708
16 × 31.5 0.541 0.139 0.054 0.049
18 × 25 0.761 0.139 0.076 0.069
18 × 31.5 0.518 0.095 0.052 0.047
18 × 35
18 × 40
0.441 0.076 0.044 0.040
0.375 0.063 0.038 0.034
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk (from d × l = 10 × 20 mm to 18 × 40 mm, excluding 12.5 × 40 mm)
002 = for cut leads, bulk (for ≥ 10 mm, excluding 12.5 × 40 mm)
003 = for crimped leads, blister (from d × l = 16 × 20 mm to 18 × 40 mm)
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm, excluding 12.5 × 40 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 8 × 11.5 mm to 12.5 × 25 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm)
012 = for bent 90° leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 32
B41888
Extended useful life ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
d = 8 mm
d = 10 mm
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 32
B41888
Extended useful life ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions2)
d = ≥ 12.5 mm
Frequency factor of permissible ripple current IAC versus frequency f
2) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 32
B41888
Extended useful life ꢀ 105 °C
Taping, packing and lead configurations
Taping
Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows:
Lead spacing F = 2.5 mm ( d = 5 … 6.3 mm)
Lead spacing F = 3.5 mm ( d = 8 mm)
Lead spacing F = 5.0 mm (from d × l = 10 × 12.5 mm to 12.5 × 30 mm)
Lead spacing F = 7.5 mm ( d = 16 ... 18 mm).
Lead spacing 2.5 mm ( d = 5 ... 6.3 mm)
Last 3 digits of ordering code: 007
Dimensions in mm
d
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
5
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0
6.3
Toler-
ance
+0.8
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
ꢀ0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 32
B41888
Extended useful life ꢀ 105 °C
Lead spacing 3.5 mm ( d = 8 mm)
Last 3 digits of ordering code: 006
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆h
D0
8
3.5
18.5 18.0 12.5 9.0
12.7 12.7 4.6
1.0
0.7
1.0
4.0
Toler-
ance
+0.8
ꢀ0.2
±1.0 ±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 32
B41888
Extended useful life ꢀ 105 °C
Lead spacing 5.0 mm ( d = 5 ... 8 mm)
Last 3 digits of ordering code: 008
Lead spacing 5.0 mm (from d × l = 10 × 12.5 mm to 12.5 × 30 mm)
Last 3 digits of ordering code: 008
Dimensions in mm
d
F
H
W
W0 W1 W2
H0
P
P0
P1
I1
t
∆h
D0
5
5.0
18.5 18.0 5.5 9.0 1.5
16.0 12.7 12.7 3.85 1.0
0.7 1.0
4.0
6.3
8
20.0
16.0 12.7 12.7 3.85
10
5.0
19.0 18.0 12.5 9.0 1.5
19.0
ꢀ
ꢀ
12.7 12.7 3.85 1.0
15.0 15.0 5.0
0.7 1.0
4.0
12.5
Toler-
ance
+0.8
ꢀ0.2
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 32
B41888
Extended useful life ꢀ 105 °C
Lead spacing 7.5 mm ( d = 16 ...18 mm)
Last 3 digits of ordering code: 009
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆P ∆h D0
4.0
16
18 *)
7.5 18.5 18.0 12.5 9.0
30.0 15.0 3.75 1.0
0.7
0
0
Toler-
ance
ꢀ0.5
+0.75
±0.8
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 ±1.0 ±1.0 ±0.2
*) Available only for case dimensions 18 × 20, 18 × 25 and 18 × 31.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 32
B41888
Extended useful life ꢀ 105 °C
Packing units and box dimensions
Ammo pack
Case size
d × l
Dimensions (mm)
Packing
units
mm
Amax
345
345
345
345
345
345
345
345
315
315
315
315
315
315
Bmax
55
55
55
55
60
60
65
65
65
65
65
65
65
65
Cmax
240
290
240
280
200
200
280
280
275
275
275
275
275
275
pcs.
5 × 11
2000
2000
1000
750
500
500
500
500
300
300
300
250
250
250
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 32
B41888
Extended useful life ꢀ 105 °C
Kinked or cut leads
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also
available upon request.
Kinked leads
Last 3 digits of ordering code: 001
With stand-off rubber seal
Case size
d × l (mm)
10 × 20
Dimensions (mm)
a ±0.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
With flat rubber seal
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 32
B41888
Extended useful life ꢀ 105 °C
Cut leads
Last 3 digits of ordering code: 002
With stand-off rubber seal
Case size
d × l (mm)
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
22 × 30
22 × 35
22 × 40
Dimensions (mm)
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
With flat rubber seal
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 32
B41888
Extended useful life ꢀ 105 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 20 mm.
There are three configurations available: Crimped leads, J leads, bent 90° leads
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
Dimensions (mm)
B ±0.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
C ±0.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
D ±0.1
E ±0.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
a ±0.5
b
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.6
1.6
1.6
1.6
1.6
7.5
7.5
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
1.0 ±0.1
7.5
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 32
B41888
Extended useful life ꢀ 105 °C
J leads
Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
C ±0.5
3.2
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.5
3.5
3.5
E ±0.5
J ±0.2
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
18 × 35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 32
B41888
Extended useful life ꢀ 105 °C
Bent 90° leads for horizontal mounting pinning
Last 3 digits of ordering code: 012
Case size
d × l (mm)
16 × 20
Dimensions (mm)
C ±0.5
4.0
E ±0.5
F ±0.5
12.0
12.0
12.0
13.0
13.0
13.0
13.0
13.0
a ±0.5
7.5
b
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
16 × 25
4.0
7.5
16 × 31.5
18 × 20
4.0
7.5
4.0
7.5
18 × 25
4.0
7.5
18 × 31.5
18 × 35
4.0
7.5
4.0
7.5
18 × 40
4.0
7.5
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 32
B41888
Extended useful life ꢀ 105 °C
Overview of packing units and code numbers for case sizes 5 × 11 ... 16 × 31.5
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads, Bent 90°
leads,
bulk
leads, leads,
blister leads,
bulk
pcs.
ꢀ
blister
pcs.
ꢀ
blister
pcs.
mm
pcs.
pcs.
pcs.
pcs.
ꢀ
5 × 11
2000 2000
2500 2000
1000 1000
1000 750
1000 500
ꢀ
6.3 × 11
8 × 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
16 × 25
16 × 31.5
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1000
1000
500
350
500
ꢀ
ꢀ
675
675
500
300
225
ꢀ
ꢀ
ꢀ
500
350
250
200
175
175
250
250
200
500
500
350
500
ꢀ
ꢀ
1)
1)
500
ꢀ
500
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
300
200
200
250
001
200
200
250
002
200
200
344
003
200
200
344
004
120
120
120
012
300
300
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
006
007
008
009
3.5
2.5
5
8
5...6.3
5...12.5
16...18
7.5
1) Available upon request
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 32
B41888
Extended useful life ꢀ 105 °C
Overview of packing units and code numbers for case sizes 18 × 20 ... 25 × 40
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads, Bent 90°
leads,
bulk
leads, leads,
blister leads,
bulk
pcs.
175
150
100
100
100
125
125
100
100
100
100
100
100
ꢀ
blister
pcs.
200
200
150
150
120
200
200
120
120
120
ꢀ
blister
pcs.
120
120
120
150
72
mm
pcs.
175
150
100
100
125
125
125
100
100
100
80
pcs.
pcs.
pcs.
200
200
150
150
ꢀ
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
20 × 20
20 × 25
20 × 30
20 × 35
20 × 40
22 × 30
22 × 35
22 × 40
25 × 40
250
175
150
100
100
100
ꢀ
250
250
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
80
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
40
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
001
002
003
004
012
007
008
009
2.5
5
7.5
4...6.3
6.3...12.5
16...18
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 32
B41888
Extended useful life ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 32
B41888
Extended useful life ꢀ 105 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 32
B41888
Extended useful life ꢀ 105 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 32
B41888
Extended useful life ꢀ 105 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
lmax
R
Widerstand
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 32
B41888
Extended useful life ꢀ 105 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Failure rate
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 32
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 32 of 32
相关型号：
B41888C7187M003
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35V, 180uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS AND REACH COMPLIANT
EPCOS
B41888C7187M006
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35V, 180uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS AND REACH COMPLIANT
EPCOS
B41888C7187M007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35V, 180uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
EPCOS
B41888C7187M009
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35V, 180uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS AND REACH COMPLIANT
EPCOS
B41888C7188M003
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35V, 1800uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS AND REACH COMPLIANT
EPCOS
B41888C7188M004
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35V, 1800uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS AND REACH COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明