B43044A2336M016 [EPCOS]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;型号: | B43044A2336M016 |
厂家: | EPCOS |
描述: | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 200V, 33uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT |
文件: | 总40页 (文件大小:681K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type:
B41044, B43044
Date:
December 2010
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
Date of
Deadline Last
Orders
Last Shipments
2012-10-13
Withdrawal
B41044A8227M000
2012-04-13
2012-07-13
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
© EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Long-life grade capacitors for professional applications
Applications
Power supplies
Features
RoHS-compatible
High CV product
Low impedance at high frequencies
High reliability
Useful life of 5000 h at 105 °C
Construction
Radial leads
Aluminum case, fully insulated
Charge-discharge proof
Minus pole marking on the insulating sleeve
Case with safety vent from diameter 8 mm
Delivery mode
Bulk
Taped, Ammo pack
Cut (see chapter "Single-ended ꢀ Taping, packing and lead
configurations, Cut leads (Chapter A)")
Kinked (see chapter "Single-ended ꢀ Taping, packing and
lead configurations, Kinked leads (Chapter A)")
Refer to chapter "Single-ended capacitors ꢀ Taping, packing
and lead configurations" for further details.
Specifications and characteristics in brief
Series
B41044
B43044
Rated voltage VR
Surge voltage VS
6.3 ... 100 V DC
160 ... 450 V DC
V
R ≤ 250 V DC: 1.15 ꢁ VR (at room temperature)
VR > 250 V DC: 1.1 ꢁ VR (at room temperature)
Rated capacitance CR 0.22 ... 15000 µF
Capacitance tolerance ±20% ꢂ M
Dissipation factor
(max.)
For capacitance higher than 1000 µF add 0.02 for every increase of
1000 µF.
(20 °C, 120 Hz)
VR
6.3 10
16
25
35
50
63
100 160 350
(V DC)
...
250 450
0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 0.15 0.20
...
tan δ
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Series
B41044
B43044
Leakage current Ileak
V
R ≤ 100 V DC
VR > 100 V DC
or 4 µA, whichever is greater
(20 °C, after 5 minutes)
(20 °C, after 1 minute)
Useful life
105 °C; VR; IAC,R
V
R ≤ 100 V DC
VR > 100 V DC
2000 h
> 2000 h for d = 5 ... 6.3 mm
> 3000 h for d = 8 mm
> 5000 h for d ≥ 10 m
Requirements
Shelf life
∆C/C
tan δ
Ileak
≤ ±20% of initial value
≤ 2 times initial specified value
≤ initial specified limit
After storage for 1000 h at 105 °C, the capacitors shall meet the
requirement of load life test after reforming process. After test: VR to be
applied for 30 minutes, 24 to 48 hours before measurement.
Low temperature
stability
VR (V DC)
6.3
4
10
3
16
2
25 ... 100
2
160 ... 250 315 ... 450
3
8
(impedance ratio)
(120 Hz)
8
6
4
3
4
ꢀ
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm,
acceleration max. 10 g, duration 3 × 2 h.
If can size D <16 mm, capacitor is mounted by the leads
If can size D ≥16 mm, capacitor rigidly clamped by the aluminum case
IEC climatic category To IEC 60068-1:
VR < 350 V DC: 40/105/56 (ꢀ40 °C/+105 °C/56 days damp heat test)
R ≥ 350 V DC: 25/105/56 (ꢀ25 °C/+105 °C/56 days damp heat test)
V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Dimensional drawing
Safety vent for diameter ≥ 8 mm.
Case Dimensions
d × l
mm
d
max × lmax
mm
5.5 × 12.5
a
mm
b
mm
5
× 11
2.0 ±0.5
2.5 ±0.5
3.5 ±0.5
5.0 ±0.5
5.0 ±0.5
5.0 ±0.5
5.0 ±0.5
5.0 ±0.5
5.0 ±0.5
7.5 ±0.5
7.5 ±0.5
7.5 ±0.5
7.5 ±0.5
7.5 ±0.5
7.5 ±0.5
7.5 ±0.5
7.5 ±0.5
0.5 ±0.1
0.5 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
6.3 × 11
6.8 × 12.5
8.5 × 13.0
8
× 11.5
10 × 12.5
10 × 16
10 × 20
10 × 25
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
16 × 35.5
18 × 25
18 × 31.5
18 × 35.5
18 × 40
11.0 × 14.0
11.0 × 17.5
11.0 × 22.0
11.0 × 27.0
13.5 × 22.0
13.5 × 27.0
17.0 × 22.0
17.0 × 27.0
17.0 × 33.5
17.0 × 37.5
19.0 × 27.0
19.0 × 33.5
19.0 × 37.5
19.0 × 42.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
Overview of available types ꢀ B41044
VR (V DC)
6.3
10
16
25
Case dimensions d × l (mm)
CR (µF)
4.7
5
5
5
5
5
× 11
× 11
× 11
× 11
× 11
10
5
5
5
5
× 11
× 11
× 11
× 11
22
5
5
5
5
× 11
× 11
× 11
× 11
5
5
5
5
× 11
× 11
× 11
× 11
33
47
100
6.3 × 11
6.3 × 11
6.3 × 11
150
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
6.3 × 11
8
8
× 11.5
× 11.5
220
8
8
× 11.5
× 11.5
330
8
8
× 11.5
× 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
16 × 20
16 × 25
16 × 31.5
18 × 35.5
470
8
× 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35.5
680
10 × 12.5
10 × 12.5
10 × 20
12.5 × 20
12.5 × 20
16 × 25
16 × 25
16 × 31.5
16 × 35.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
16 × 35.5
1000
1500
2200
3300
4700
6800
10000
15000
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
VR (V DC)
35
50
63
100
Case dimensions d × l (mm)
CR (µF)
0.22
0.47
1.0
5
5
5
5
5
5
5
5
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
2.2
5
5
5
× 11
× 11
× 11
3.3
5
5
5
× 11
× 11
× 11
4.7
5
5
5
5
× 11
× 11
× 11
× 11
10
6.3 × 11
22
6.3 × 11
6.3 × 11
8
× 11.5
33
6.3 × 11
10 × 12.5
10 × 16
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 40
47
6.3 × 11
8
8
× 11.5
× 11.5
8
× 11.5
100
150
220
330
470
680
1000
1500
2200
3300
8
8
× 11.5
× 11.5
10 × 16
10 × 20
10 × 25
12.5 × 20
16 × 20
16 × 25
16 × 35.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 40
B43044
Low impedance & high ripple current ꢀ 105 °C
Overview of available types ꢀ B43044
VR (V DC)
160
200
250
350
400
450
Case dimensions d × l (mm)
CR (µF)
3.3
4.7
10
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 31.5
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 25
10 × 20
12.5 × 20
16 × 20
16 × 25
10 × 20
12.5 × 25
16 × 25
16 × 25
22
10 × 20
10 × 20
12.5 × 20
12.5 × 20
16 × 25
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 25
33
47
68
16 × 31.5 18 × 31.5 18 × 35.5
100
150
220
330
16 × 31.5 18 × 31.5 18 × 40
18 × 31.5
16 × 31.5 18 × 25
16 × 31.5 18 × 31.5 18 × 40
18 × 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B41044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 6.3 V DC
22
33
47
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
15000
5
5
5
5
× 11
× 11
× 11
× 11
0.700
0.700
0.650
0.650
0.300
0.300
0.300
0.140
0.100
0.100
0.054
0.050
0.050
0.030
0.030
0.025
0.022
180
180
180
180
280
280
280
450
660
B41044A2226M***
B41044A2336M***
B41044A2476M***
B41044A2107M***
B41044A2157M***
B41044A2227M***
B41044A2337M***
B41044A2477M***
B41044A2687M***
B41044A2108M***
B41044A2158M***
B41044A2228M***
B41044A2338M***
B41044A2478M***
B41044A2688M***
B41044A2109M***
B41044A2159M***
6.3 × 11
6.3 × 11
6.3 × 11
8
× 11.5
10 × 12.5
10 × 12.5
10 × 20
12.5 × 20
12.5 × 20
16 × 25
16 × 25
16 × 31.5
16 × 35.5
660
1100
1400
1400
2100
2100
2600
3000
VR = 10 V DC
22
33
47
100
150
220
330
470
5
5
5
5
× 11
× 11
× 11
× 11
0.700
0.700
0.650
0.650
0.300
0.300
0.140
0.140
180
180
180
180
280
280
450
450
B41044A3226M***
B41044A3336M***
B41044A3476M***
B41044A3107M***
B41044A3157M***
B41044A3227M***
B41044A3337M***
B41044A3477M***
6.3 × 11
6.3 × 11
8
8
× 11.5
× 11.5
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B41044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 10 V DC
680
1000
1500
2200
3300
4700
6800
10000
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
16 × 35.5
0.100
0.080
0.054
0.050
0.038
0.030
0.025
0.022
660
850
B41044A3687M***
B41044A3108M***
B41044A3158M***
B41044A3228M***
B41044A3338M***
B41044A3478M***
B41044A3688M***
B41044A3109M***
1100
1400
1700
2100
2600
3000
VR = 16 V DC
10
22
33
5
5
5
5
× 11
× 11
× 11
× 11
0.70
0.70
0.70
0.65
0.30
0.30
0.14
0.14
180
180
180
180
280
280
450
450
660
B41044A4106M***
B41044A4226M***
B41044A4336M***
B41044A4476M***
B41044A4107M***
B41044A4157M***
B41044A4227M***
B41044A4337M***
B41044A4477M***
B41044A4687M***
B41044A4108M***
B41044A4158M***
B41044A4228M***
B41044A4338M***
B41044A4478M***
B41044A4688M***
47
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
6.3 × 11
6.3 × 11
8
8
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35.5
× 11.5
× 11.5
0.10
0.080
0.054
0.050
0.038
0.030
0.025
0.022
850
1100
1400
1700
2100
2600
3000
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B41044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 25 V DC
4.7
10
22
33
47
100
150
220
330
470
680
1000
1500
2200
3300
4700
5
5
5
5
5
× 11
× 11
× 11
× 11
× 11
0.70
0.70
0.70
0.70
0.65
0.30
0.14
0.14
180
180
180
180
180
280
450
450
660
B41044A5475M***
B41044A5106M***
B41044A5226M***
B41044A5336M***
B41044A5476M***
B41044A5107M***
B41044A5157M***
B41044A5227M***
B41044A5337M***
B41044A5477M***
B41044A5687M***
B41044A5108M***
B41044A5158M***
B41044A5228M***
B41044A5338M***
B41044A5478M***
6.3 × 11
8
8
× 11.5
× 11.5
10 × 12.5
10 × 16
10 × 20
12.5 × 20
16 × 20
16 × 25
16 × 31.5
18 × 35.5
0.10
0.080
0.054
0.050
0.030
0.030
0.025
0.022
850
1100
1400
2100
2100
2600
3000
VR = 35 V DC
4.7
10
22
33
47
100
150
220
330
5
5
5
5
× 11
× 11
× 11
× 11
0.70
0.70
0.70
0.65
0.30
0.14
0.14
0.10
0.080
180
180
180
180
280
450
450
660
850
B41044A7475M***
B41044A7106M***
B41044A7226M***
B41044A7336M***
B41044A7476M***
B41044A7107M***
B41044A7157M***
B41044A7227M***
B41044A7337M***
6.3 × 11
8
8
10 × 12.5
10 × 16
× 11.5
× 11.5
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B41044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 35 V DC
470
680
1000
1500
2200
3300
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35.5
0.054
0.050
0.038
0.030
0.025
0.022
1100
1400
1700
2100
2600
3000
B41044A7477M***
B41044A7687M***
B41044A7108M***
B41044A7158M***
B41044A7228M***
B41044A7338M***
VR = 50 V DC
0.22
0.47
1.0
2.2
3.3
4.7
10
22
33
5
5
5
5
5
5
5
5
× 11
× 11
× 11
× 11
× 11
× 11
× 11
× 11
8.0
5.0
3.5
3.0
2.6
2.3
1.4
1.2
0.60
0.43
0.35
0.17
0.12
0.10
0.085
0.065
0.043
0.038
0.034
18
25
40
55
65
B41044A6224M***
B41044A6474M***
B41044A6105M***
B41044A6225M***
B41044A6335M***
B41044A6475M***
B41044A6106M***
B41044A6226M***
B41044A6336M***
B41044A6476M***
B41044A6107M***
B41044A6157M***
B41044A6227M***
B41044A6337M***
B41044A6477M***
B41044A6687M***
B41044A6108M***
B41044A6158M***
B41044A6228M***
90
120
150
200
250
340
490
650
810
1100
1200
1600
2000
2300
6.3 × 11
8
8
47
× 11.5
× 11.5
100
150
220
330
470
680
1000
1500
2200
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 35.5
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 40
B41044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B41044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 63 V DC
3.3
4.7
10
22
33
5
5
5
× 11
× 11
× 11
2.0
2.0
2.0
64
76
111
190
233
328
456
610
809
1036
1411
1843
1967
B41044A8335M***
B41044A8475M***
B41044A8106M***
B41044A8226M***
B41044A8336M***
B41044A8476M***
B41044A8107M***
B41044A8157M***
B41044A8227M***
B41044A8337M***
B41044A8477M***
B41044A8687M***
B41044A8108M***
6.3 × 11
6.3 × 11
8
10 × 16
10 × 20
10 × 25
12.5 × 20
16 × 20
16 × 25
16 × 35.5
0.60
0.60
0.50
0.12
0.10
0.090
0.085
0.050
0.043
0.025
47
× 11.5
100
150
220
330
470
680
1000
VR = 100 V DC
2.2
3.3
4.7
10
22
33
5
5
5
× 11
× 11
× 11
2.5
2.5
2.5
1.0
0.60
0.40
0.30
0.15
0.12
0.070
0.050
0.030
52
64
76
B41044A9225M***
B41044A9335M***
B41044A9475M***
B41044A9106M***
B41044A9226M***
B41044A9336M***
B41044A9476M***
B41044A9107M***
B41044A9157M***
B41044A9227M***
B41044A9337M***
B41044A9477M***
6.3 × 11
8
128
224
319
417
570
762
1048
1404
1980
× 11.5
10 × 12.5
10 × 16
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 40
47
100
150
220
330
470
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 40
B43044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B43044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 160 V DC
22
33
47
10 × 20
10 × 20
12.5 × 20
12.5 × 20
16 × 25
16 × 31.5
16 × 31.5
18 × 31.5
1.3
1.3
440
565
725
B43044A1226M***
B43044A1336M***
B43044A1476M***
B43044A1686M***
B43044A1107M***
B43044A1157M***
B43044A1227M***
B43044A1337M***
0.91
0.63
0.27
0.22
0.22
0.22
68
950
100
150
220
330
1280
1300
1300
1700
VR = 200 V DC
22
33
47
10 × 20
12.5 × 20
12.5 × 20
12.5 × 25
16 × 25
18 × 25
18 × 31.5
1.5
440
590
780
B43044A2226M***
B43044A2336M***
B43044A2476M***
B43044A2686M***
B43044A2107M***
B43044A2157M***
B43044A2227M***
0.91
0.91
0.63
0.27
0.27
0.22
68
950
100
150
220
1280
1500
1700
VR = 250 V DC
10
22
33
47
68
100
150
220
10 × 20
12.5 × 20
12.5 × 25
12.5 × 25
16 × 25
16 × 31.5
18 × 31.5
18 × 40
3.5
2.3
1.7
1.7
0.78
0.63
0.42
0.35
300
480
630
B43044F2106M***
B43044F2226M***
B43044F2336M***
B43044F2476M***
B43044F2686M***
B43044F2107M***
B43044F2157M***
B43044F2227M***
630
1000
1400
1450
1485
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 40
B43044
Low impedance & high ripple current ꢀ 105 °C
Technical data and ordering codes ꢀ B43044
CR
Case
Zmax
IAC,R
Ordering code
120 Hz
20 °C
µF
dimensions
d × l
mm
100 kHz
20 °C
Ω
100 kHz
105 °C
mA
(composition see below)
VR = 350 V DC
10
22
33
47
68
10 × 20
12.5 × 20
16 × 20
16 × 25
16 × 31.5
18 × 31.5
2.9
2.1
0.91
0.73
0.49
0.40
180
270
600
700
1100
1170
B43044A4106M***
B43044A4226M***
B43044A4336M***
B43044A4476M***
B43044A4686M***
B43044A4107M***
100
VR = 400 V DC
10
22
33
47
68
10 × 20
12.5 × 25
16 × 25
16 × 25
18 × 31.5
18 × 40
2.9
1.3
0.91
0.73
0.49
0.34
180
300
600
700
1100
1250
B43044A9106M***
B43044A9226M***
B43044A9336M***
B43044A9476M***
B43044A9686M***
B43044A9107M***
100
VR = 450 V DC
3.3
4.7
10
22
33
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 31.5
18 × 35.5
6.5
3.6
2.5
1.7
1.1
0.93
0.71
150
200
315
570
620
900
980
B43044A5335M***
B43044A5475M***
B43044A5106M***
B43044A5226M***
B43044A5336M***
B43044A5476M***
B43044A5686M***
47
68
Composition of ordering code
*** = Version
000 = for standard leads, bulk
001 = for kinked leads, bulk
002 = for cut leads, bulk
016 = for taped leads, Ammo pack, lead spacing F = 2.0 mm (for 5 mm)
007 = for taped leads, Ammo pack, lead spacing F = 2.5 mm (for 5 ... 6.3 mm)
006 = for taped leads, Ammo pack, lead spacing F = 3.5 mm (for 8 mm)
008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (for 5 ... 12.5 mm)
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (for d × l = 16 × 20 ... 16 × 31.5 mm and
18 × 25 ... 18 × 31.5 mm)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
R ≤ 100 V DC
V
d = 5 ... 6.3 mm
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
V
R ≤ 100 V DC
d = 8 mm
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions2)
R ≤ 100 V DC
V
d ≥ 10 mm
Useful life
depending on ambient temperature TA under ripple current operating conditions2)
VR > 100 V DC
2) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Frequency factor of permissible ripple current IAC versus frequency f
B41044
Frequency factor of permissible ripple current IAC versus frequency f
B43044
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Taping, packing and lead configurations
Taping
Single-ended capacitors are available taped in Ammo pack from diameter 4 to 18 mm as follows:
Lead spacing F = 2.0 mm ( d = 4 … 5 mm)
Lead spacing F = 2.5 mm ( d = 4 … 6.3 mm)
Lead spacing F = 3.5 mm ( d = 8 mm)
Lead spacing F = 5.0 mm ( d = 4 … 12.5 mm)
Lead spacing F = 7.5 mm ( d = 16 ... 18 mm).
Lead spacing 2.0 mm ( d = 4 ... 5 mm)
Last 3 digits of ordering code: 016
Dimensions in mm
d
F
H
W
W0
W1
9.0
W2
3.0
P
P0
P1
I1
t
∆h
D0
4 ... 5 2.0
+0.8
ꢀ0.2
18.5 18.0 7.0
12.7 12.7 5.10 1.0
0.7
1
4.0
±0.75 ±0.5 min. ±0.5 max. ±1.0 ±0.3 ±0.7 max. ±0.2 ±1.0 ±0.2
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Lead spacing 2.5 mm ( d = 4 ... 6.3 mm)
Last 3 digits of ordering code: 007
Dimensions in mm
d
F
H
W
W0
W1
W2
H0
P
P0
P1
I1
t
∆h
D0
4 ... 6.3 2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0
Toler-
rance
+0.8
ꢀ0.2
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2
Lead spacing 3.5 mm ( d = 8 mm)
Last 3 digits of ordering code: 006
Dimensions in mm
d
F
H
W
W0
W1
9.0
W2
3.0
P
P0
P1
I1
t
∆h
D0
8
3.5
18.5 18.0 10
12.7 12.7 4.6
1.0
0.7
1.0
4.0
Toler- +0.8
ance ꢀ0.2
±1.0 ±0.5 min. ±0.5 max. ±1.0 ±0.3 ±0.6 max. ±0.2 max. ±0.2
Leads can also run straight through the taping area. Taping is available up to dimensions
d × l = 8 × 15 mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Lead spacing 5.0 mm ( d = 4 ... 8 mm)
Last 3 digits of ordering code: 008
Lead spacing 5.0 mm ( d = 10 ... 12.5 mm)
Last 3 digits of ordering code: 008
Dimensions in mm
d
F
H
W
W0 W1 W2
H0
P
P0
P1
I1
t
∆h
D0
4 ...
6.3
5.0
18.5 18.0 5.5 9.0 1.5
16.0 12.7 12.7 3.85 1.0
0.6
1.0
4.0
8
20.0
19.0 18.0 12.5 9.0 1.5
19.0
12.5
10.0
16.0 12.7 12.7 3.85
10
12.5
5.0
ꢀ
ꢀ
12.7 12.7 3.85 1.0
15.0 15.0 5.0
0.6
1.0
4.0
Toler-
ance
+0.8
ꢀ0.2
+0.3
ꢀ0.2
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max.
max. ±0.2
Taping is available up to dimensions d × l = 10 × 31.5 mm and 12.5 × 25 mm.
Taping is not available for d × l = 8 × 20 mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Lead spacing 7.5 mm ( d = 16 ...18 mm)
Last 3 digits of ordering code: 009
Dimensions in mm
d
F
H
W
W0
W1
W2
1.5
P
P0
P1
I1
t
∆P ∆h D0
4.0
16
18
7.5 18.5 18.0 12.5 9.0
30.0 15.0 3.75 1.0
0.7
0
0
Toler-
ance
ꢀ0.5
+0.75
±0.8
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 ±1.0 ±1.0 ±0.2
Taping is available up to dimensions d × l = 16 × 31.5 mm and 18 × 31.5 mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Cut or kinked leads
Single-ended capacitors are available with cut or kinked leads. Other lead configurations also
available upon request.
Cut leads (Chapter A)
Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086,
B43088, B43827, B43828.
Last 3 digits of ordering code: 002
Case size d x l (mm) Dimensions
Case size d x l (mm) Dimensions
(mm)
(mm)
a ±0.5
a ±0.5
4
5
5
x 7
1.5
2.0
2.0
2.5
2.5
3.5
3.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
12.5 x 16
12.5 x 20
12.5 x 25
12.5 x 31.5
12.5 x 35.5
12.5 x 40
16 x 20
16 x 25
16 x 31.5
16 x 35.5
16 x 40
18 x 20
18 x 25
18 x 31.5
18 x 35.5
18 x 40
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
x 7
x 11
6.3 x 7
6.3 x 11
8
8
8
8
x 7
x 11.5
x 15
x 20
10 x 12.5
10 x 16
10 x 20
10 x 25
10 x 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Cut leads (Chapter B)
Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896,
B42824, B42851, B43866, B43867, B43890, B43896.
Last 3 digits of ordering code: 002
With stand-off rubber seal
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10 × 20
12.5 × 20
12.5 × 25
16 × 20
With flat rubber seal
16 × 25
16 × 31.5
16 × 35.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Kinked leads (Chapter A)
Available for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086,
B43088, B43827, B43828.
Last 3 digits of ordering code: 001
Case size d x l (mm) Dimensions
Case size d x l (mm) Dimensions
(mm)
(mm)
a ±0.5
a ±0.5
4
5
5
x 7
1.5
2.0
2.0
2.5
2.5
3.5
3.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
12.5 x 16
12.5 x 20
12.5 x 25
12.5 x 31.5
12.5 x 35.5
12.5 x 40
16 x 20
16 x 25
16 x 31.5
16 x 35.5
16 x 40
18 x 20
18 x 25
18 x 31.5
18 x 35.5
18 x 40
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
x 7
x 11
6.3 x 7
6.3 x 11
8
8
8
8
x 7
x 11.5
x 15
x 20
10 x 12.5
10 x 16
10 x 20
10 x 25
10 x 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Kinked leads (Chapter B)
Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896,
B42824, B42851, B43866, B43867, B43890, B43896.
Last 3 digits of ordering code: 001
With stand-off rubber seal
Case size
d × l (mm)
10 × 20
Dimensions (mm)
a ±0.5
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
16 × 35.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
With flat rubber seal
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 18 mm.
There are three configurations available: Crimped leads, J leads, bent 90° leads
Available for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896,
B42824, B42851, B43866, B43867, B43890, B43896.
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
16 × 20
Dimensions (mm)
B ±0.2
1.5
C ±0.5
3.0
D ±0.1
E ±0.1
0.3
a ±0.5
b
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
16 × 25
1.5
3.0
0.3
16 × 31.5
16 × 35.5
18 × 20
1.5
3.0
0.3
1.5
3.0
0.3
1.5
3.0
0.3
18 × 25
1.5
3.0
0.3
18 × 31.5
18 × 35
1.5
3.0
0.3
1.5
3.0
0.3
18 × 40
1.5
3.0
0.3
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
J leads
Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size
d × l (mm)
10 × 12.5
10 × 16
Dimensions (mm)
C ±0.5
3.2
3.2
3.2
3.2
3.2
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
E ±0.5
J ±0.2
1.2
1.2
1.2
1.2
1.2
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
a ±0.5
5.0
5.0
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.6 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
16 × 35.5
18 × 20
18 × 25
18 × 31.5
18 × 35
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Bent 90° leads for horizontal mounting pinning
Last 3 digits of ordering code: 012
Case size
d × l (mm)
16 × 20
Dimensions (mm)
C ±0.5
4.0
E ±0.5
F ±0.5
12.0
12.0
12.0
12.0
13.0
13.0
13.0
13.0
13.0
a ±0.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
b
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
16 × 25
4.0
16 × 31.5
16 × 35.5
18 × 20
4.0
4.0
4.0
18 × 25
4.0
18 × 31.5
18 × 35
4.0
4.0
18 × 40
4.0
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Packing units and box dimensions
Ammo pack
Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088,
B43827, B43828.
Case size
d × l
Dimensions (mm)
Packing
units
mm
Amax
330
330
330
330
330
330
330
330
330
330
330
341
341
320
315
315
315
315
Bmax
50
50
50
50
50
50
50
50
50
54
58
60
65
65
65
65
65
65
Cmax
196
226
226
286
286
246
246
246
196
196
196
272
272
270
275
275
275
275
pcs.
4 × 7
2000
2000
2000
2000
2000
1000
1000
500
5 × 7
5 × 11
6.3 × 7
6.3 × 11
8 × 7
8 × 11.5
8 × 15
10 × 12.5
10 × 16
10 × 20
12.5 × 20
12.5 × 25
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
500
500
500
500
500
300
300
250
250
250
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Ammo pack
Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824,
B42851, B43866, B43867, B43890, B43896.
Case size
d × l
Dimensions (mm)
Packing
units
mm
Amax
345
345
345
345
345
345
315
315
315
315
315
315
Bmax
55
55
60
60
65
65
65
65
65
65
65
65
Cmax
240
280
200
200
280
280
275
275
275
275
275
275
pcs.
8 × 11.5
10 × 12.5
10 × 16
1000
750
500
500
500
500
300
300
300
250
250
250
10 × 20
12.5 × 20
12.5 × 25
16 × 20
16 × 25
16 × 31.5
18 × 20
18 × 25
18 × 31.5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Overview of packing units and code numbers for case sizes 4 x 7 ... 16 x 40
Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088,
B43827, B43828.
Case size
d x l
mm
Standard,
bulk
pcs.
Taped,
Ammo pack
pcs.
Kinked leads, Cut leads,
bulk
pcs.
bulk
pcs.
4
5
5
x 7
10000
7500
5000
5000
5000
5000
2500
2000
1500
2000
1500
1000
1000
750
2000
2000
2000
2000
2000
1000
1000
1000
ꢀ
15000
10000
10000
10000
5000
5000
4000
2500
2000
2500
2000
1500
1250
1000
500
15000
10000
10000
10000
5000
5000
4000
2500
2000
2500
2000
1500
1250
1000
500
x 7
x 11
6.3 x 7
6.3 x 11
8
8
8
8
x 7
x 11.5
x 15
x 20
10 x 12.5
10 x 16
10 x 20
10 x 25
12.5 x 16
12.5 x 20
12.5 x 25
12.5 x 31.5
12.5 x 35.5
12.5 x 40
16 x 20
16 x 25
16 x 31.5
16 x 35.5
16 x 40
500
500
500
500
500
500
500
ꢀ
750
750
500
500
500
750
750
500
ꢀ
750
750
500
ꢀ
750
750
375
300
300
300
ꢀ
500
500
375
500
500
250
375
375
250
375
375
250
ꢀ
375
375
The last three
digits of the
complete
ordering code
state the lead
configuration
000
Code
F (mm) d (mm)
001
002
006
007
008
009
016
3.5
2.5
5.0
7.5
2.0
8
4 ... 6.3
4 ... 12.5
16 ... 18
4 ... 5
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Overview of packing units and code numbers for case sizes 18 x 20 ... 18 x 40
Valid for series B41002, B41022, B41044, B41827, B41828, B43044, B43082, B43086, B43088,
B43827, B43828.
Case size
d x l
mm
Standard,
bulk
pcs.
Taped,
Ammo pack
pcs.
Kinked leads, Cut leads,
bulk
pcs.
bulk
pcs.
18 x 20
18 x 25
18 x 31.5
18 x 35.5
18 x 40
250
250
250
250
250
ꢀ
100
100
100
100
100
100
100
100
100
100
250
250
250
ꢀ
The last three
digits of the
complete
000
Code
009
F (mm) d (mm)
7.5 16 ... 18
001
002
ordering code
state the lead
configuration
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Overview of packing units and code numbers for case sizes 8 × 11.5 ... 16 × 35.5
Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824,
B42851, B43866, B43867, B43890, B43896.
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads, Bent 90°
leads,
bulk
leads, leads,
blister leads,
bulk
pcs.
ꢀ
blister
pcs.
ꢀ
blister
pcs.
mm
pcs.
pcs.
pcs.
pcs.
ꢀ
8 × 11.5
10 × 12.5
10 × 16
1000 1000
1000 750
1000 500
ꢀ
ꢀ
1000
1000
500
350
500
ꢀ
ꢀ
675
675
500
300
225
ꢀ
ꢀ
ꢀ
10 × 20
500
350
250
200
175
175
250
250
200
100
500
500
350
500
ꢀ
ꢀ
1)
1)
12.5 × 20
12.5 × 25
12.5 × 30
12.5 × 35
12.5 × 40
16 × 20
500
ꢀ
500
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
300
200
200
250
100
001
200
200
250
100
002
200
200
344
150
003
200
200
344
150
004
120
120
120
150
012
16 × 25
300
16 × 31.5
16 × 35.5
300
ꢀ
The last three 000
digits of the
complete
ordering code
state the lead
configuration
Code F (mm) d (mm)
3.5
5
7.5
8
006
008
009
5...12.5
16...18
1) Available upon request
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Overview of packing units and code numbers for case sizes 18 × 20 ... 18 × 40
Valid for series B41858, B41859, B41863, B41866, B41868, B41888, B41890, B41896, B42824,
B42851, B43866, B43867, B43890, B43896.
PAPR
Case size
d × l
Stan- Taped,
dard, Ammo pack
bulk
Kinked Cut
Crimped J leads, Bent 90°
leads,
bulk
leads, leads,
blister leads,
bulk
pcs.
175
150
100
100
100
002
blister
pcs.
200
200
150
150
120
003
blister
pcs.
120
120
120
150
72
mm
pcs.
175
150
100
100
125
pcs.
pcs.
pcs.
200
200
150
150
ꢀ
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
250
175
150
100
100
100
001
250
250
ꢀ
ꢀ
The last three 000
digits of the
Code F (mm) d (mm)
004
012
7.5
16...18
009
complete
ordering code
state the lead
configuration
Please read Cautions and warnings and
Important notes at the end of this document.
Page 34 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling aluminum electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 35 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw-
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 36 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Topic
Safety information
Reference
chapter "General
technical information"
Soldering,
cleaning agents
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
chapter "Capacitors with
screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals ꢀ
of insulating
sleeves
when ring clips are used for mounting.
accessories"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 37 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Reststrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
lmax
R
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 38 of 40
B41044, B43044
Low impedance & high ripple current ꢀ 105 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Operating voltage
Formierspannung
Betriebsspannung
Rated voltage, DC voltage
Surge voltage
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Scheinwiderstand bei Temperatur T
Verlustfaktor
Failure rate
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢁ π ꢁ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢁ π ꢁ f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 39 of 40
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKK, MKD, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trade-
marks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
Page 40 of 40
相关型号:
B43044A2686M000
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 200V, 20% +Tol, 20% -Tol, 68uF,
EPCOS
B43044A4476M007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 350V, 47uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
EPCOS
B43044A5106M007
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 450V, 10uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
EPCOS
B43044A5336M000
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 450V, 20% +Tol, 20% -Tol, 33uF,
EPCOS
B43044A9106M002
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 400V, 20% +Tol, 20% -Tol, 10uF,
EPCOS
B43044A9106M006
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 400V, 10uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
EPCOS
B43044F2107M002
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 250V, 20% +Tol, 20% -Tol, 100uF,
EPCOS
B43044F2336M009
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 250V, 20% +Tol, 20% -Tol, 33uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明