B43081A4336M006 [EPCOS]

Aluminum electrolytic capacitors; 铝电解电容器
B43081A4336M006
型号: B43081A4336M006
厂家: EPCOS    EPCOS
描述:

Aluminum electrolytic capacitors
铝电解电容器

电容器 铝电解电容器
文件: 总15页 (文件大小:339K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Aluminum electrolytic capacitors  
Alu-X product lines  
Single-ended capacitors  
Series/Type:  
B43081  
Data Sheet  
Date:  
August 2008  
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the infor-  
mation contained therein without EPCOS’ prior express consent is prohibited.  
Single-ended capacitors  
High ripple current – 105 °C  
Single-ended capacitors  
B43081  
B43081  
High ripple current – 105 °C  
Long-life grade capacitors for professional applications  
Applications  
Electronic ballast applications  
Features  
RoHS-compatible  
Very high ripple current  
High reliability  
Load life of 3000 h at 105 °C  
Construction  
Radial leads  
Aluminum case, fully insulated  
Charge-discharge proof  
Minus pole marking on the insulating sleeve  
Case with safety vent from diameter 8 mm  
Delivery mode  
Bulk  
Taped, Ammo pack  
Cut  
Kinked  
Please read Cautions and warnings and  
Important notes at the end of this document.  
2
08/08  
Single-ended capacitors  
B43081  
High ripple current – 105 °C  
Specifications and characteristics in brief  
Rated voltage VR  
160 ... 400 V DC  
Operating temperature –25 °C … +105 °C  
range  
Rated capacitance CR 0.1 … 100 µF  
(20 °C, 120 Hz)  
Capacitance tolerance ±20%  
M
Load life  
3000 h  
Requirements:  
(105 °C, VR, IAC,R  
)
C/C ≤ ±20% of initial value  
tan δ ≤ 2 times initial specified limit  
Ileak initial specified limit  
Leakage current Ileak  
(20 °C, after 5 minutes)  
CR VR  
------- ------  
µF  
I
leak 0.02 µA  
V
Dissipation factor (max.) tan δ ≤ 0.12  
(20 °C, 120 Hz)  
Low temperature  
stability  
(impedance ratio)  
(120 Hz)  
Z(25 °C)  
Z(+20 °C)  
--------------------------- 7  
Shelf life  
After storage for 1000 h at 105 °C, the capacitors shall meet the require-  
ment of load life test after reforming process. After test: VR to be applied  
for 30 minutes, 24 to 48 hours before measurement.  
Frequency multiplier for 50 Hz  
rated ripple current  
120 Hz  
0.5  
300 Hz 1 kHz  
10 kHz 100 kHz  
0.3  
0.6  
0.8  
0.9  
1.0  
Temperature multiplier +50 °C  
for rated ripple current  
+70 °C  
1.8  
+85 °C  
1.4  
+105 °C  
1.0  
2.1  
Please read Cautions and warnings and  
Important notes at the end of this document.  
3
08/08  
Single-ended capacitors  
B43081  
High ripple current – 105 °C  
Dimensional drawing  
d
l
+
-
15 min.  
5 min.  
Minus pole Safety vent  
marking  
KAL1080-C-E  
Safety vent for diameter 8 mm.  
Case dimensions  
d × l  
d
max × Imax  
a
b
mm  
mm  
mm  
mm  
6.3 × 11  
6.8 × 12.5  
2.5 ±0.5  
0.5 ±0.1  
0.6 ±0.1  
0.6 ±0.1  
0.6 ±0.1  
0.6 ±0.1  
0.6 ±0.1  
0.6 ±0.1  
0.6 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
8
8
8
× 11.5  
8.5 × 13.0  
8.5 × 16.5  
8.5 × 21.5  
3.5 ±0.5  
3.5 ±0.5  
3.5 ±0.5  
5.0 ±0.5  
5.0 ±0.5  
5.0 ±0.5  
5.0 ±0.5  
7.5 ±0.5  
7.5 ±0.5  
7.5 ±0.5  
7.5 ±0.5  
7.5 ±0.5  
7.5 ±0.5  
× 15  
× 20  
10 × 16  
10 × 20  
12.5 × 20  
12.5 × 25  
16 × 20  
16 × 25  
16 × 31.5  
18 × 20  
18 × 25  
18 × 31.5  
11.0 × 17.5  
11.0 × 22.0  
13.5 × 22.0  
13.5 × 27.0  
17.0 × 22.0  
17.0 × 27.0  
17.0 × 33.5  
19.0 × 22.0  
19.0 × 27.0  
19.0 × 33.5  
Please read Cautions and warnings and  
Important notes at the end of this document.  
4
08/08  
Single-ended capacitors  
B43081  
High ripple current – 105 °C  
Overview of available types  
VR (V DC)  
160  
200  
250  
350  
400  
Case dimensions d × l (mm)  
CR (µF)  
1.0  
8
× 11.5  
6.3 × 11.5  
2.2  
8
× 15  
3.3  
8
8
× 15  
× 20  
4.7  
6.8  
8
× 11.5  
10 × 16  
10 × 16  
10 × 20  
10 × 16  
10 × 20  
12.5 × 20  
10  
10 × 16  
10 × 16  
10 × 16  
10 × 20  
10 × 20  
12.5 × 20  
15  
22  
10 × 20  
10 × 20  
16 × 25  
10 × 20  
10 × 20  
10 × 20  
12.5 × 20  
12.5 × 20  
16 × 20  
16 × 25  
18 × 25  
12.5 × 25  
16 × 25  
33  
47  
12.5 × 20  
12.5 × 20  
12.5 × 20  
12.5 × 25  
16 × 25  
16 × 31.5  
12.5 × 20  
12.5 × 25  
12.5 × 25  
16 × 25  
16 × 35.5  
18 × 25  
68  
12.5 × 25  
12.5 × 25  
16 × 20  
16 × 25  
18 × 35.5  
100  
16 × 25  
16 × 25  
18 × 20  
18 × 25  
Please read Cautions and warnings and  
Important notes at the end of this document.  
5
08/08  
Single-ended capacitors  
B43081  
High ripple current – 105 °C  
Technical data and ordering codes  
VR  
CR  
Case  
IAC,R  
Ordering code  
120 Hz  
20 °C  
V DC µF  
dimensions  
d × l  
mm  
100 kHz  
105 °C  
mA  
(composition see  
below)  
160  
22  
33  
47  
47  
68  
100  
4.7  
6.8  
10  
15  
22  
33  
47  
68  
10 × 20  
10 × 20  
12.5 × 20  
12.5 × 25  
12.5 × 25  
16 × 25  
500  
500  
600  
670  
750  
B43081A1226M***  
B43081A1336M***  
B43081A1476M***  
B43081B1476M***  
B43081A1686M***  
B43081A1107M***  
1100  
200  
8
× 11.5  
158  
230  
310  
400  
500  
600  
600  
750  
750  
1100  
1100  
B43081A2475M***  
B43081A2685M***  
B43081A2106M***  
B43081A2156M***  
B43081A2226M***  
B43081A2336M***  
B43081A2476M***  
B43081A2686M***  
B43081B2686M***  
B43081A2107M***  
B43081B2107M***  
10 × 16  
10 × 16  
10 × 20  
10 × 20  
12.5 × 20  
12.5 × 20  
12.5 × 25  
16 × 20  
16 × 25  
18 × 20  
68  
100  
100  
250  
1.0  
4.7  
6.8  
8
× 11.5  
18  
200  
240  
300  
380  
500  
600  
600  
670  
700  
780  
1000  
1200  
1200  
B43081F2105M***  
B43081F2475M***  
B43081F2685M***  
B43081F2106M***  
B43081F2156M***  
B43081F2226M***  
B43081G2226M***  
B43081F2336M***  
B43081G2336M***  
B43081F2476M***  
B43081G2476M***  
B43081F2686M***  
B43081G2686M***  
B43081F2107M***  
10 × 16  
10 × 16  
10 × 16  
10 × 16  
10 × 20  
12.5 × 20  
12.5 × 20  
12.5 × 25  
12.5 × 25  
16 × 25  
16 × 25  
18 × 35.5  
18 × 25  
10  
15  
22  
22  
33  
33  
47  
47  
68  
68  
100  
350  
10  
22  
33  
47  
68  
10 × 20  
12.5 × 20  
16 × 20  
16 × 25  
18 × 25  
250  
350  
500  
650  
800  
B43081A4106M***  
B43081A4226M***  
B43081A4336M***  
B43081A4476M***  
B43081A4686M***  
*** = Version  
000 = for standard leads, bulk  
001 = for kinked leads, bulk  
002 = for cut leads, bulk  
007 = for taped leads, Ammo pack, lead spacing a = 2.5 mm  
006 = for taped leads, Ammo pack, lead spacing a = 3.5 mm  
008 = for taped leads, Ammo pack, lead spacing a = 5.0 mm  
Please read Cautions and warnings and  
Important notes at the end of this document.  
6
08/08  
Single-ended capacitors  
B43081  
High ripple current – 105 °C  
Technical data and ordering codes  
VR  
CR  
Case  
IAC,R  
Ordering code  
120 Hz  
20 °C  
V DC µF  
dimensions  
d × l  
mm  
100 kHz  
105 °C  
mA  
(composition see  
below)  
400  
1.0  
2.2  
3.3  
3.3  
4.7  
6.8  
6.8  
6.3 × 11.5  
× 15  
× 15  
× 20  
18  
108  
108  
121  
180  
220  
240  
250  
270  
400  
400  
500  
600  
670  
750  
750  
B43081A9105M***  
B43081A9225M***  
B43081A9335M***  
B43081B9335M***  
B43081A9475M***  
B43081A9685M***  
B43081B9685M***  
B43081A9106M***  
B43081B9106M***  
B43081A9156M***  
B43081A9226M***  
B43081B9226M***  
B43081A9336M***  
B43081B9336M***  
B43081A9476M***  
B43081B9476M***  
8
8
8
10 × 20  
10 × 20  
12.5 × 20  
10 × 20  
12.5 × 20  
16 × 25  
12.5 × 25  
16 × 25  
16 × 25  
16 × 31.5  
16 × 35.5  
18 × 25  
10  
10  
15  
22  
22  
33  
33  
47  
47  
*** = Version  
000 = for standard leads, bulk  
001 = for kinked leads, bulk  
002 = for cut leads, bulk  
007 = for taped leads, Ammo pack, lead spacing a = 2.5 mm  
006 = for taped leads, Ammo pack, lead spacing a = 3.5 mm  
008 = for taped leads, Ammo pack, lead spacing a = 5.0 mm  
Please read Cautions and warnings and  
Important notes at the end of this document.  
7
08/08  
Single-ended capacitors  
B43081  
Taping, packing and lead configurations  
Taping, packing and lead configurations of single-ended capacitors  
Single-ended capacitors are available taped in Ammo pack from diameter 4 to 10 mm as follows:  
Lead spacing 2.0 mm ( d = 4 ... 5 mm)  
Last 3 digits of ordering code: 016  
ød  
P
h  
h  
P0  
D0  
1 max.  
View B  
Base tape  
F
Adhesive tape  
P1  
B
KAL1138-D-E  
Dimensions in mm  
d
F
H
W
W0  
W1  
9.0  
W2  
3.0  
P
P0  
P1  
l1  
t
h  
D0  
4 ... 5 2.0  
18.5 18.0 7.0  
12.7 12.7 5.10 1.0  
0.7  
1
4.0  
–0.2 ±0.75 ±0.5 min. ±0.5 max. ±1.0 ±0.3 ±0.7 max. ±0.2 ±1.0 ±0.2  
Please read Cautions and warnings and  
Important notes at the end of this document.  
8
08/08  
Single-ended capacitors  
B43081  
Taping, packing and lead configurations  
Lead spacing 2.5 mm ( d = 4 ... 6.3 mm)  
Last 3 digits of ordering code: 007  
ød  
P
P0  
h  
h  
1 max.  
View B  
D0  
F
Base tape  
Adhesive tape  
P1  
B
KAL1074-3-E  
Dimensions in mm  
d
F
H
H0  
W
W0 W1 W2  
P
P0  
P1  
l1  
t
h  
D0  
4 ... 6.3  
2.5 18.5 16.0 18.0 7.0 9.0 3.0 12.7 12.7 5.10 1.0 0.7  
0
4.0  
Tolerance – 0.2 ±0.75 ±0.5 ±0.5 min. ±0.5 max. ±1.0 ±0.3 ±0.7 max. ±0.2 ±1.0 ±0.2  
Lead spacing 3.5 mm ( d = 8 mm)  
Last 3 digits of ordering code: 006  
ød  
P
h  
h  
P0  
D0  
1 max.  
View B  
Base tape  
F
Adhesive tape  
P1  
B
KAL1138-D-E  
Dimensions in mm  
d
F
H
W
W0  
W1  
9.0  
W2  
3.0  
P
P0  
P1  
l1  
t
h  
D0  
8
3.5 18.5  
18.0 10  
12.7 12.7 5.10 1.0  
0.7  
1
4.0  
Tolerance ±0.5 ±0.75 ±0.5 min. ±0.5 max. ±1.0 ±0.3 ±0.7 max. ±0.2 max. ±0.2  
Please read Cautions and warnings and  
Important notes at the end of this document.  
9
08/08  
Single-ended capacitors  
B43081  
Taping, packing and lead configurations  
Lead spacing 5.0 mm ( d = 4 ... 8 mm)  
Last 3 digits of ordering code: 008  
ød  
P
P0  
h  
h  
1 max.  
View B  
D0  
F
Base tape  
Adhesive tape  
P1  
B
KAL1075-B-E  
Lead spacing 5.0 mm ( d = 10 mm)  
Last 3 digits of ordering code: 008  
ød  
P
P0  
h  
h  
1 max.  
View B  
D0  
F
Base tape  
Adhesive tape  
P1  
B
KAL1076-J-E  
Dimensions in mm  
d
F
H
H0  
W
W0 W1 W2  
P
P0  
P1  
L1  
t
h  
D0  
4 ... 6.3  
5.0 18.5 16  
5.0 18.5 16  
18.0 7.0 9.0 3.0 12.7 12.7 3.85 1.0 0.6 2.0 4.0  
18.0 10 9.0 3.0 12.7 12.7 3.85 1.0 0.6 2.0 4.0  
18.0 12.5 9.0 3.0 12.7 12.7 3.85 1.0 0.6 2.0 4.0  
8
10  
5.0 18.5  
Tolerance +0.6 ±0.75 ±0.5 +1.0 +1.0 ±0.5 max. ±0.5 ±0.3 ±0.7 max. +0.3 max. ±0.2  
–0.2 –0.5 –0 –0.2  
Taping is available up to dimensions d × l = 10 × 20 mm. For 12.5, 16 and 18 mm taping is not  
available.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
10 08/08  
Single-ended capacitors  
B43081  
Taping, packing and lead configurations  
Kinked or cut leads  
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also avail-  
able on request.  
Kinked leads  
Last 3 digits of ordering code: 001  
2.1±0.1  
l
3.2±0.1  
KAL1137-5  
l
4.5±0.5  
KAL1084-A  
Case size d × l (mm) a (mm)  
Case size d × l (mm) a (mm)  
4 × 7  
1.5  
2.0  
2.0  
2.5  
2.5  
2.5  
3.5  
3.5  
3.5  
3.5  
5.0  
5.0  
5.0  
5.0  
5.0  
12.5 × 16  
12.5 × 20  
12.5 × 25  
12.5 × 31.5  
12.5 × 35.5  
12.5 × 40  
16 × 20  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
5 × 7  
5 × 11  
6.3 × 7  
6.3 × 11  
6.3 × 15  
8 × 7  
8 × 11.5  
8 × 15  
16 × 25  
16 × 31.5  
16 × 35.5  
16 × 40  
8 × 20  
10 × 12.5  
10 × 16  
10 × 20  
10 × 25  
10 × 31.5  
18 × 20  
18 × 25  
18 × 31.5  
18 × 35.5  
18 × 40  
Please read Cautions and warnings and  
Important notes at the end of this document.  
11 08/08  
Single-ended capacitors  
B43081  
Taping, packing and lead configurations  
Cut leads  
Last 3 digits of ordering code: 002  
l
4.5±0.5  
KAL1086-R  
Case size d × l (mm) a (mm)  
Case size d × l (mm) a (mm)  
4 × 7  
1.5  
2.0  
2.0  
2.5  
2.5  
2.5  
3.5  
3.5  
3.5  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
12.5 × 16  
12.5 × 20  
12.5 × 25  
12.5 × 31.5  
12.5 × 35.5  
12.5 × 40  
16 × 20  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
5 × 7  
5 × 11  
6.3 × 7  
6.3 × 11  
6.3 × 15  
8 × 7  
8 × 11.5  
8 × 15  
16 × 25  
16 × 31.5  
16 × 35.5  
16 × 40  
8 × 20  
10 × 12.5  
10 × 16  
10 × 20  
10 × 25  
10 × 31.5  
18 × 20  
18 × 25  
18 × 31.5  
18 × 35.5  
18 × 40  
Please read Cautions and warnings and  
Important notes at the end of this document.  
12 08/08  
Cautions and warnings  
General  
Also see “Important notes” on page 15.  
1
Aluminum electrolytic capacitors have a bi-polar structure. This is marked on the body of the  
capacitor. A capacitor must not be mounted with reversed polarity. The application of an AC  
or reverse voltage may cause a short circuit or damage the capacitor. Bi-polar capacitors  
must not be used in AC applications, where the polarity may be reversed in the circuits or is  
unknown.  
2
3
The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage,  
as this will result in a rapid increase of the leakage current and may damage the capacitor. It  
is recommended to operate the capacitor at 70–80% of its rated voltage to optimize its serv-  
ice life.  
The ripple current applied to the capacitor must be within the permitted range. An excessive  
ripple current leads to impaired electrical properties and may damage the capacitor. Note that  
the sum of the peak values of the ripple voltage and the DC operating voltage must not ex-  
ceed the rated DC voltage.  
4
5
Capacitors must be used within their permitted range of operating temperature. Operation at  
room temperature optimizes their service life.  
Capacitors with case diameter 8 mm are equipped with a safety vent. In capacitors fitted  
with a lead or soldering lug, the safety vent is usually located at the base of the case. It needs  
sufficient space around it to operate optimally. The following dimensions are recommended:  
for case diameter d = 8 to 16 mm, more than 2 mm; for d =18 to 35 mm, more than 3 mm;  
and for d = 42 mm or more, more than 5 mm.  
6
Capacitors should not be mounted with the safety vent face down on the board. Do not locate  
any wire or copper trace near the safety vent. Do not reverse the voltage, as this may result  
in excess pressure and the leakage of electrolyte.  
7
8
Gas is released through the safety vent when the pressure inside the capacitor is too high. A  
gaseous liquid around the safety vent does not indicate a leakage of electrolyte.  
The capacitor should be stored under conditions of normal temperature and in a non-acid,  
non-alkali environment of normal humidity. Exposure to high temperatures, for example un-  
der direct sunlight, will reduce its operating life. If the capacitor is stored in an environment  
containing acids or alkalis, the solderability of the leads may be affected.  
9
The leakage current of an aluminum electrolytic capacitor may increase after a long period  
of storage. After such storage, the capacitor must be aged by applying the rated operating  
voltage for 6–8 hours before use.  
10  
Manual soldering:  
a
Soldering must be performed within the specified conditions.  
Bit temperature: 350 °C; application time of soldering iron: 3 seconds.  
Ensure that the soldering iron does not touch any part of the capacitor body.  
b
Please read Cautions and warnings and  
Important notes at the end of this document.  
13 08/08  
Cautions and warnings  
11  
Do not apply excessive force to the leads and terminals. Do not move the capacitor after sol-  
dering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe  
the following rules to prevent undue stress to the capacitor:  
a
b
Do not tilt or bend the capacitor after soldering.  
Ensure that the terminal spacing matches the corresponding hole spacing on the PC  
board.  
12  
13  
The aluminum case is not insulated from the cathode. Do not place a conductor under the  
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of  
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink  
sleeve to ensure safe usage.  
The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
14 08/08  
Important notes  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application. As  
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them  
than the customers themselves. For these reasons, it is always ultimately incumbent on the  
customer to check and decide whether an EPCOS product with the properties described in the  
product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of electronic components or failure  
before the end of their usual service life cannot be completely ruled out in the current state  
of the art, even if they are operated as specified. In customer applications requiring a very  
high level of operational safety and especially in customer applications in which the malfunction  
or failure of an electronic component could endanger human life or health (e.g. in accident  
prevention or life-saving systems), it must therefore be ensured by means of suitable design of  
the customer application or other action taken by the customer (e.g. installation of protective  
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of  
malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We alsoreservetherighttodiscontinueproductionanddeliveryofproducts. Consequently,  
we cannot guarantee that all products named in this publication will always be available. The  
aforementioned does not apply in case of individual agreements deviating from the foregoing for  
customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version  
of the “General Terms of Delivery for Products and Services in the Electrical Industry”  
published by the German Electrical and Electronics Industry Association (ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,  
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,  
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks  
registered or pending in Europe and in other countries. Further information will be found on  
the Internet at www.epcos.com/trademarks.  
15 08/08  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY