B43305A9157M002 [EPCOS]
Aluminum electrolytic capacitors; 铝电解电容器
| 型号： | B43305A9157M002 |
| 厂家： | 
EPCOS |
| 描述： | Aluminum electrolytic capacitors |
| 文件： | 总20页 (文件大小：1002K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Snap-in capacitors
Series/Type:
B43305
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Snap-in capacitors
B43305
Ultra compact ꢁ 85 °C
General-purpose grade capacitors
Applications
Switch-mode power supplies in industrial and entertainment
electronics
Uninterruptiple power supplies
Features
Voltage derating (0.93 ꢀ VR) enables 105 °C operation, more
details available upon request
Extremely high CV product, ultra compact
High ripple current capability
Different case sizes available for each capacitance value
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with PET insulation available
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection by safety vent on the base
Terminals
Standard version with 2 terminals,
2 lengths available: 6.3 and 4.5 mm
3 terminals to ensure correct insertion: length 4.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 20
B43305
Ultra compact ꢁ 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
200 ... 450 V DC
1.15 ꢀ VR (for VR ≤ 250 V DC)
1.10 ꢀ VR (for VR ≥ 400 V DC)
Rated capacitance CR
Capacitance tolerance
Dissipation factor tan δ
(20 °C, 120 Hz)
68 ... 3300 µF
±20% ꢂ M
V
V
R ≤ 250 V DC: tan δ ≤ 0.15
R ≥ 400 V DC: tan δ ≤ 0.20
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Useful life
Approx. 20 nH
Requirements:
85 °C; VR; IAC,R
> 2000 h
∆C/C
tan δ
Ileak
≤ ±30% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
40 °C; VR; 1.1 ꢀ IAC,R
> 100000 h
Voltage endurance test
Post test requirements:
85 °C; VR
2000 h
∆C/C
tan δ
Ileak
≤ ±10% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature
Max. impedance ratio
at 100 Hz
VR
≤ 250 V ≥ 400 V
Z -25
Z -40
°
°
C / Z 20
C / Z 20
°
°
3
7
7
C
C
14
IEC climatic category
To IEC 60068-1:
V
V
R ≤ 250 V DC: 40/085/56 (ꢁ40 °C/+85 °C/56 days damp heat test)
R ≥ 400 V DC: 25/085/56 (ꢁ25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
ꢁ40 °C to +85 °C but the impedance at ꢁ40 °C should be taken into
consideration.
Detail specification
Sectional specification
Similar to CECC 30301-806
IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 20
B43305
Ultra compact ꢁ 85 °C
Dimensional drawings
Snap-in capacitors with standard insulation (PVC or PET)
Snap-in terminals, length 6.3 ±1 mm. Also
available in a shorter version with a length
of 4.5 ꢁ1 mm. PET insulation is marked
with label "PET" on the sleeve.
Snap-in capacitors are also available with
3 terminals (length 4.5 ꢁ1 mm). PET insulation
is marked with label "PET" on the sleeve.
Dimensions (mm) Approx.
Packing
Dimensions (mm) Approx.
Packing
weight (g) units (pcs.)
weight (g) units (pcs.)
d +1
22
22
22
22
22
22
25
25
25
25
25
25
25
l ±2
25
30
35
40
45
50
25
30
35
40
45
50
55
d +1
30
30
30
30
30
30
30
35
35
35
35
35
35
35
l ±2
25
30
35
40
45
50
55
25
30
35
40
45
50
55
9
12
15
18
20
24
13
17
19
22
25
29
32
160
160
160
160
160
160
130
130
130
130
130
130
130
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 20
B43305
Ultra compact ꢁ 85 °C
Snap-in capacitors with PVC insulation and PET insulation cap on terminal side
Snap-in terminals, length 6.3 +1/ꢁ1.4
mm. Also available in a shorter version
with a length of 4.5 ꢁ1.4 mm. PET
insulation cap is positioned under the
insulation sleeve.
Snap-in capacitors are also available with
3 terminals (length 4.5 ꢁ1.4 mm). PET
insulation cap is positioned under the insulation
sleeve.
Dimensions (mm)
Approx.
Packing
Dimensions (mm)
Approx.
Packing
weight (g) units (pcs.)
weight (g) units (pcs.)
d +1.4
22
l +2.2/ꢁ2
25
d +1.4
30
l +2.2/ꢁ2
25
9
12
15
18
20
24
13
17
19
22
25
29
32
160
160
160
160
160
160
130
130
130
130
130
130
130
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
22
30
30
30
22
35
30
35
22
40
30
40
22
45
30
45
22
50
30
50
30
55
25
25
25
30
35
25
25
35
35
30
25
40
35
35
25
45
35
40
25
50
35
45
25
55
35
50
35
55
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 20
B43305
Ultra compact ꢁ 85 °C
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
Snap-in capacitors
Terminal version
Insulation version
PVC
PET
PVC plus PET cap
M080
Standard terminals 6.3 mm
Short terminals 4.5 mm
3 terminals 4.5 mm
M000
M060
M067
M062
M007
M087
M002
M082
Ordering examples:
B43305A9107M007
B43305A9107M062
B43305A9107M080
}
}
}
snap-in capacitor with short terminals and standard PVC insulation
snap-in capacitor with 3 terminals and PET insulation
snap-in capacitor with standard terminals and PVC insulation with
additional PET insulation cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 20
B43305
Ultra compact ꢁ 85 °C
Overview of available types
VR (V DC)
200
250
400
450
Case dimensions d × l (mm)
CR (µF)
68
22 × 25
22 × 25
22 × 25
22 × 25
22 × 25
22 × 25
22 × 25
82
100
120
22 × 30
25 × 25
150
180
22 × 30
22 × 35
25 × 30
22 × 30
25 × 25
22 × 40
25 × 30
30 × 25
220
270
22 × 35
25 × 30
22 × 45
25 × 35
30 × 30
22 × 25
22 × 45
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
35 × 25
330
22 × 25
22 × 25
22 × 30
25 × 25
22 × 50
25 × 40
30 × 30
35 × 25
25 × 50
30 × 35
35 × 30
390
470
560
680
820
22 × 30
25 × 25
25 × 45
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
22 × 30
25 × 25
22 × 35
25 × 30
25 × 50
30 × 40
35 × 30
30 × 45
35 × 35
22 × 35
25 × 30
22 × 40
25 × 35
30 × 25
30 × 45
35 × 35
30 × 50
35 × 40
22 × 40
25 × 30
30 × 25
22 × 45
25 × 40
30 × 30
30 × 50
35 × 40
35 × 45
35 × 55
22 × 45
25 × 35
30 × 30
25 × 45
30 × 35
35 × 25
30 × 55
35 × 45
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 20
B43305
Ultra compact ꢁ 85 °C
VR (V DC)
200
250
400
450
Case dimensions d × l (mm)
CR (µF)
1000
22 × 50
25 × 40
30 × 30
35 × 25
25 × 50
30 × 35
35 × 30
35 × 50
1200
1500
25 × 45
30 × 35
35 × 30
25 × 55
30 × 40
35 × 35
25 × 55
30 × 40
35 × 30
30 × 50
35 × 40
1800
2200
30 × 45
35 × 35
30 × 55
35 × 45
30 × 55
35 × 40
35 × 50
2700
3300
35 × 50
35 × 55
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 20
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
1)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 200 V DC
330
390
470
470
560
560
680
680
680
22 × 25
380
320
270
270
230
230
190
190
190
150
150
150
130
130
130
130
110
110
110
85
520
440
370
370
310
310
260
260
260
210
210
210
180
180
180
180
150
150
150
120
120
120
100
100
80
2.72
2.95
3.38
3.33
3.82
3.79
4.34
4.18
3.82
4.90
4.76
4.37
5.54
5.42
4.83
4.11
6.10
5.48
4.99
7.15
6.74
5.58
7.59
6.33
8.80
7.22
8.44
9.55
1.38
1.50
1.72
1.70
1.95
1.93
2.21
2.13
1.95
2.50
2.42
2.23
2.83
2.76
2.46
2.09
3.11
2.79
2.54
3.64
3.44
2.84
3.87
3.23
4.49
3.68
4.30
4.87
B43305A2337M0*#
B43305A2397M0*#
B43305A2477M0*#
B43305B2477M0*#
B43305A2567M0*#
B43305B2567M0*#
B43305A2687M0*#
B43305B2687M0*#
B43305C2687M0*#
B43305A2827M0*#
B43305B2827M0*#
B43305C2827M0*#
B43305A2108M0*#
B43305B2108M0*#
B43305C2108M0*#
B43305D2108M0*#
B43305A2128M0*#
B43305B2128M0*#
B43305C2128M0*#
B43305A2158M0*#
B43305B2158M0*#
B43305C2158M0*#
B43305A2188M0*#
B43305B2188M0*#
B43305A2228M0*#
B43305B2228M0*#
B43305A2278M0*#
B43305A2338M0*#
22 × 25
22 × 30
25 × 25
22 × 35
25 × 30
22 × 40
25 × 30
30 × 25
22 × 45
25 × 35
30 × 30
22 × 50
25 × 40
30 × 30
35 × 25
25 × 45
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
30 × 45
35 × 35
30 × 55
35 × 40
35 × 50
35 × 55
820
820
820
1000
1000
1000
1000
1200
1200
1200
1500
1500
1500
1800
1800
2200
2200
2700
3300
85
85
70
70
60
60
45
40
80
65
55
Composition of ordering code
* = Insulation feature
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
0 = PVC insulation
6 = PET insulation
2 = snap-in 3 terminals (4.5 mm)
8 = PVC insulation with additional PET insulation
cap on terminal side
7 = snap-in short terminals (4.5 mm)
1) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 20
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
2)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 250 V DC
270
330
330
390
390
470
470
560
560
560
680
680
680
820
820
820
1000
1000
1000
1200
1200
1200
1500
1500
1800
1800
2200
22 × 25
470
380
380
320
320
270
270
230
230
230
190
190
190
150
150
150
130
130
130
110
110
110
85
640
520
520
440
440
370
370
310
310
310
260
260
260
210
210
210
180
180
180
150
150
150
120
120
100
100
80
2.61
3.01
2.95
3.27
3.21
3.72
3.68
4.19
4.16
3.62
4.74
4.73
4.15
5.34
4.73
3.82
6.04
5.22
4.69
6.77
6.29
5.32
7.41
6.13
8.31
6.91
7.83
1.33
1.53
1.50
1.67
1.64
1.90
1.87
2.13
2.12
1.84
2.42
2.41
2.12
2.72
2.41
1.95
3.08
2.66
2.39
3.45
3.21
2.71
3.78
3.13
4.24
3.52
3.99
B43305E2277M0*#
B43305E2337M0*#
B43305F2337M0*#
B43305E2397M0*#
B43305F2397M0*#
B43305E2477M0*#
B43305F2477M0*#
B43305E2567M0*#
B43305F2567M0*#
B43305G2567M0*#
B43305E2687M0*#
B43305F2687M0*#
B43305G2687M0*#
B43305E2827M0*#
B43305F2827M0*#
B43305G2827M0*#
B43305E2108M0*#
B43305F2108M0*#
B43305G2108M0*#
B43305E2128M0*#
B43305F2128M0*#
B43305G2128M0*#
B43305E2158M0*#
B43305F2158M0*#
B43305E2188M0*#
B43305F2188M0*#
B43305E2228M0*#
22 × 30
25 × 25
22 × 30
25 × 25
22 × 35
25 × 30
22 × 40
25 × 35
30 × 25
22 × 45
25 × 40
30 × 30
25 × 45
30 × 35
35 × 25
25 × 50
30 × 35
35 × 30
25 × 55
30 × 40
35 × 35
30 × 50
35 × 40
30 × 55
35 × 45
35 × 50
85
70
70
60
Composition of ordering code
* = Insulation feature
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
0 = PVC insulation
6 = PET insulation
2 = snap-in 3 terminals (4.5 mm)
8 = PVC insulation with additional PET insulation
cap on terminal side
7 = snap-in short terminals (4.5 mm)
2) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 20
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
3)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 400 V DC
68
82
22 × 25
1990
1650
1360
1130
900
750
750
620
620
500
500
500
410
410
410
410
350
350
350
290
290
290
240
240
200
200
170
170
140
2690
2230
1830
1530
1220
1020
1020
830
830
680
680
680
560
560
560
560
470
470
470
390
390
390
330
330
270
270
230
230
190
1.28
1.41
1.55
1.70
1.98
2.17
2.18
2.49
2.51
2.92
2.89
2.79
3.31
3.29
3.22
3.04
3.68
3.62
3.67
4.14
4.37
4.03
4.91
4.56
5.55
5.18
6.23
5.85
6.63
0.65
0.72
0.79
0.87
1.01
1.11
1.11
1.27
1.28
1.49
1.47
1.42
1.69
1.68
1.64
1.55
1.87
1.85
1.87
2.11
2.23
2.05
2.50
2.32
2.83
2.64
3.18
2.98
3.38
B43305A9686M0*#
B43305A9826M0*#
B43305A9107M0*#
B43305A9127M0*#
B43305A9157M0*#
B43305A9187M0*#
B43305B9187M0*#
B43305A9227M0*#
B43305B9227M0*#
B43305A9277M0*#
B43305B9277M0*#
B43305C9277M0*#
B43305A9337M0*#
B43305B9337M0*#
B43305C9337M0*#
B43305D9337M0*#
B43305A9397M0*#
B43305B9397M0*#
B43305C9397M0*#
B43305A9477M0*#
B43305B9477M0*#
B43305C9477M0*#
B43305A9567M0*#
B43305B9567M0*#
B43305A9687M0*#
B43305B9687M0*#
B43305A9827M0*#
B43305B9827M0*#
B43305A9108M0*#
22 × 25
22 × 25
22 × 25
22 × 30
22 × 30
25 × 25
22 × 35
25 × 30
22 × 45
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
35 × 25
25 × 45
30 × 35
35 × 30
25 × 50
30 × 40
35 × 30
30 × 45
35 × 35
30 × 50
35 × 40
30 × 55
35 × 45
35 × 50
100
120
150
180
180
220
220
270
270
270
330
330
330
330
390
390
390
470
470
470
560
560
680
680
820
820
1000
Composition of ordering code
* = Insulation feature
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
0 = PVC insulation
6 = PET insulation
2 = snap-in 3 terminals (4.5 mm)
8 = PVC insulation with additional PET insulation
cap on terminal side
7 = snap-in short terminals (4.5 mm)
3) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 20
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
4)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 450 V DC
68
82
22 × 25
1990
1650
1360
1130
1130
900
900
750
750
750
620
620
620
500
500
500
500
410
410
410
350
350
350
290
290
240
240
200
170
2800
2320
1900
1590
1590
1270
1270
1060
1060
1060
870
870
870
710
710
710
710
580
580
580
490
490
490
410
410
340
340
1.37
1.50
1.66
1.90
1.90
2.20
2.21
2.48
2.42
2.49
2.82
2.78
2.87
3.20
3.17
3.18
3.04
3.70
3.64
3.73
4.11
4.36
4.06
4.92
4.62
5.50
5.20
5.89
6.79
0.70
0.76
0.85
0.97
0.97
1.12
1.13
1.26
1.23
1.27
1.44
1.41
1.46
1.63
1.62
1.62
1.55
1.88
1.86
1.90
2.09
2.22
2.07
2.51
2.35
2.81
2.65
3.00
3.46
B43305A5686M0*#
B43305A5826M0*#
B43305A5107M0*#
B43305A5127M0*#
B43305B5127M0*#
B43305A5157M0*#
B43305B5157M0*#
B43305A5187M0*#
B43305B5187M0*#
B43305C5187M0*#
B43305A5227M0*#
B43305B5227M0*#
B43305C5227M0*#
B43305A5277M0*#
B43305B5277M0*#
B43305C5277M0*#
B43305D5277M0*#
B43305A5337M0*#
B43305B5337M0*#
B43305C5337M0*#
B43305A5397M0*#
B43305B5397M0*#
B43305C5397M0*#
B43305A5477M0*#
B43305B5477M0*#
B43305A5567M0*#
B43305B5567M0*#
B43305A5687M0*#
B43305A5827M0*#
22 × 25
22 × 25
22 × 30
25 × 25
22 × 35
25 × 30
22 × 40
25 × 30
30 × 25
22 × 45
25 × 35
30 × 30
22 × 50
25 × 40
30 × 30
35 × 25
25 × 50
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
30 × 45
35 × 35
30 × 50
35 × 40
35 × 45
35 × 55
100
120
120
150
150
180
180
180
220
220
220
270
270
270
270
330
330
330
390
390
390
470
470
560
560
680
820
280
240
Composition of ordering code
* = Insulation feature
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
0 = PVC insulation
6 = PET insulation
2 = snap-in 3 terminals (4.5 mm)
8 = PVC insulation with additional PET insulation
cap on terminal side
7 = snap-in short terminals (4.5 mm)
4) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 20
B43305
Ultra compact ꢁ 85 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Voltage derating (0.93 ꢀ VR) enables 105 °C operation
Frequency characteristics of ESR
Frequency factor of permissible ripple
Typical behavior
current IAC versus frequency f
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 20
B43305
Ultra compact ꢁ 85 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 20
B43305
Ultra compact ꢁ 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 20
B43305
Ultra compact ꢁ 85 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 20
B43305
Ultra compact ꢁ 85 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 20
B43305
Ultra compact ꢁ 85 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Nennkapazität
CS
Series capacitance
Serienkapazität
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
d
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
lmax
R
Widerstand
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 20
B43305
Ultra compact ꢁ 85 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Failure rate
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢀ π ꢀ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢀ π ꢀ f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 20 of 20
相关型号：
©2020 ICPDF网 联系我们和版权申明