B43305B5127M007 [EPCOS]
General-purpose grade capacitors; 通用级电容![B43305B5127M007](http://pdffile.icpdf.com/pdf1/p00100/img/icpdf/B43305A2108M000_538028_icpdf.jpg)
型号: | B43305B5127M007 |
厂家: | ![]() |
描述: | General-purpose grade capacitors |
文件: | 总17页 (文件大小:1011K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Aluminum electrolytic capacitors
Snap-in capacitors
Series/Type:
B43305
Date:
December 2006
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Snap-in capacitors
B43305
Ultra compact ꢁ 85 °C
General-purpose grade capacitors
Applications
Switch-mode power supplies in industrial and entertainment
electronics
Uninterruptiple power supplies
Features
Extremely high CV product, ultra compact
High ripple current capability
Different case sizes available for each capacitance value
Voltage derating (0.93 ꢀ VR) enables 105 °C operation,
more details available upon request
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection by safety vent on the base
Terminals
Standard version with 2 terminals,
2 lengths available: 6.3 and 4.5 mm
3 terminals to ensure correct insertion: length 4.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B43305
Ultra compact ꢁ 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
200 ... 450 V DC
1.15 ꢀ VR (for VR ≤ 250 V DC)
1.10 ꢀ VR (for VR ≥ 400 V DC)
Rated capacitance CR 68 ... 3300 µF
Capacitance tolerance ±20% ꢂ M
Dissipation factor tan δ
(20 °C, 120 Hz)
V
V
R ≤ 250 V DC: tan δ ≤ 0.15
R ≥ 400 V DC: tan δ ≤ 0.20
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Useful life
Approx. 20 nH
> 2000 h
Requirements:
∆C/C ≤ ±30% of initial value
85 °C, VR, IAC,R
40 °C, VR, 1.1 ꢀ IAC,R
> 100000 h tan δ
≤ 3 times initial specified limit
≤ initial specified limit
Ileak
Voltage endurance test
Post test requirements:
85 °C, VR
2000 h
∆C/C
tan δ
Ileak
≤ ±10% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
IEC climatic category
Detail specification
To IEC 60068-1:
V
V
R ≤ 250 V DC: 40/085/56 (ꢁ40 °C/+85 °C/56 days damp heat test)
R ≥ 400 V DC: 25/085/56 (ꢁ25 °C/+85 °C/56 days damp heat test)
Similar to CECC 30301-806
Sectional specification IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
B43305
Ultra compact ꢁ 85 °C
Dimensional drawings
Snap-in terminals, length 6.3 ±1 mm.
Also available in a shorter version with a
length of 4.5 ꢁ1 mm. For packing mode
and ordering example see next page.
Snap-in capacitors are also available with
3 terminals (length 4.5 ꢁ1 mm).
For packing mode and ordering example see
next page.
Dimensions (mm) Approx
Packing
Dimensions (mm) Approx
Packing
weight(g) units (pcs.)
weight(g) units (pcs.)
d +1
22
22
22
22
22
22
25
25
25
25
25
25
25
l ±2
25
30
35
40
45
50
25
30
35
40
45
50
55
d +1
30
30
30
30
30
30
30
35
35
35
35
35
35
35
l ±2
25
30
35
40
45
50
55
25
30
35
40
45
50
55
9
12
15
18
20
24
13
17
19
22
25
29
32
160
160
160
160
160
160
130
130
130
130
130
130
130
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 17
B43305
Ultra compact ꢁ 85 °C
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes for terminal styles
Snap-in capacitors
Terminal versions
Identification in 3rd block of ordering code
Standard terminals (6.3 ±1) mm
Short terminals (4.5 ꢁ1) mm
3 terminals (4.5 ꢁ1) mm
M000
M007
M002
Ordering examples:
B43305A9107M007
B43305A9107M002
}
}
snap-in capacitor with short terminals
snap-in capacitor with 3 terminals
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 17
B43305
Ultra compact ꢁ 85 °C
Overview of available types
VR (V DC)
200
250
400
450
Case dimensions d × l (mm)
CR (µF)
68
22 × 25
22 × 25
22 × 25
22 × 25
22 × 25
22 × 25
22 × 25
82
100
120
22 × 30
25 × 25
150
180
22 × 30
22 × 35
25 × 30
22 × 30
25 × 25
22 × 40
25 × 30
30 × 25
220
270
22 × 35
25 × 30
22 × 45
25 × 35
30 × 30
22 × 25
22 × 45
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
35 × 25
330
22 × 25
22 × 25
22 × 30
25 × 25
22 × 50
25 × 40
30 × 30
35 × 25
25 × 50
30 × 35
35 × 30
390
470
560
680
820
22 × 30
25 × 25
25 × 45
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
22 × 30
25 × 25
22 × 35
25 × 30
25 × 50
30 × 40
35 × 30
30 × 45
35 × 35
22 × 35
25 × 30
22 × 40
25 × 35
30 × 25
30 × 45
35 × 35
30 × 50
35 × 40
22 × 40
25 × 30
30 × 25
22 × 45
25 × 40
30 × 30
30 × 50
35 × 40
35 × 45
35 × 55
22 × 45
25 × 35
30 × 30
25 × 45
30 × 35
35 × 25
30 × 55
35 × 45
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
B43305
Ultra compact ꢁ 85 °C
VR (V DC)
200
250
400
450
Case dimensions d × l (mm)
CR (µF)
1000
22 × 50
25 × 40
30 × 30
35 × 25
25 × 50
30 × 35
35 × 30
35 × 50
1200
1500
25 × 45
30 × 35
35 × 30
25 × 55
30 × 40
35 × 35
25 × 55
30 × 40
35 × 30
30 × 50
35 × 40
1800
2200
30 × 45
35 × 35
30 × 55
35 × 45
30 × 55
35 × 40
35 × 50
2700
3300
35 × 50
35 × 55
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 17
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
1)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 200 V DC
330
390
470
470
560
560
680
680
680
22 × 25
380
320
270
270
230
230
190
190
190
150
150
150
130
130
130
130
110
110
110
85
520
440
370
370
310
310
260
260
260
210
210
210
180
180
180
180
150
150
150
120
120
120
100
100
80
2.72
2.95
3.38
3.33
3.82
3.79
4.34
4.18
3.82
4.90
4.76
4.37
5.54
5.42
4.83
4.11
6.10
5.48
4.99
7.15
6.74
5.58
7.59
6.33
8.80
7.22
8.44
9.55
1.38
1.50
1.72
1.70
1.95
1.93
2.21
2.13
1.95
2.50
2.42
2.23
2.83
2.76
2.46
2.09
3.11
2.79
2.54
3.64
3.44
2.84
3.87
3.23
4.49
3.68
4.30
4.87
B43305A2337M00*
B43305A2397M00*
B43305A2477M00*
B43305B2477M00*
B43305A2567M00*
B43305B2567M00*
B43305A2687M00*
B43305B2687M00*
B43305C2687M00*
B43305A2827M00*
B43305B2827M00*
B43305C2827M00*
B43305A2108M00*
B43305B2108M00*
B43305C2108M00*
B43305D2108M00*
B43305A2128M00*
B43305B2128M00*
B43305C2128M00*
B43305A2158M00*
B43305B2158M00*
B43305C2158M00*
B43305A2188M00*
B43305B2188M00*
B43305A2228M00*
B43305B2228M00*
B43305A2278M00*
B43305A2338M00*
22 × 25
22 × 30
25 × 25
22 × 35
25 × 30
22 × 40
25 × 30
30 × 25
22 × 45
25 × 35
30 × 30
22 × 50
25 × 40
30 × 30
35 × 25
25 × 45
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
30 × 45
35 × 35
30 × 55
35 × 40
35 × 50
35 × 55
820
820
820
1000
1000
1000
1000
1200
1200
1200
1500
1500
1500
1800
1800
2200
2200
2700
3300
85
85
70
70
60
60
45
40
80
65
55
Composition of ordering code
* = Terminal style
0 = snap-in standard terminals (6.3 ±1) mm
2 = snap-in 3 terminals (4.5 ꢁ1) mm
7 = snap-in short terminals (4.5 ꢁ1) mm
1) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 17
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
2)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 250 V DC
270
330
330
390
390
470
470
560
560
560
680
680
680
820
820
820
1000
1000
1000
1200
1200
1200
1500
1500
1800
1800
2200
22 × 25
470
380
380
320
320
270
270
230
230
230
190
190
190
150
150
150
130
130
130
110
110
110
85
640
520
520
440
440
370
370
310
310
310
260
260
260
210
210
210
180
180
180
150
150
150
120
120
100
100
80
2.61
3.01
2.95
3.27
3.21
3.72
3.68
4.19
4.16
3.62
4.74
4.73
4.15
5.34
4.73
3.82
6.04
5.22
4.69
6.77
6.29
5.32
7.41
6.13
8.31
6.91
7.83
1.33
1.53
1.50
1.67
1.64
1.90
1.87
2.13
2.12
1.84
2.42
2.41
2.12
2.72
2.41
1.95
3.08
2.66
2.39
3.45
3.21
2.71
3.78
3.13
4.24
3.52
3.99
B43305E2277M00*
B43305E2337M00*
B43305F2337M00*
B43305E2397M00*
B43305F2397M00*
B43305E2477M00*
B43305F2477M00*
B43305E2567M00*
B43305F2567M00*
B43305G2567M00*
B43305E2687M00*
B43305F2687M00*
B43305G2687M00*
B43305E2827M00*
B43305F2827M00*
B43305G2827M00*
B43305E2108M00*
B43305F2108M00*
B43305G2108M00*
B43305E2128M00*
B43305F2128M00*
B43305G2128M00*
B43305E2158M00*
B43305F2158M00*
B43305E2188M00*
B43305F2188M00*
B43305E2228M00*
22 × 30
25 × 25
22 × 30
25 × 25
22 × 35
25 × 30
22 × 40
25 × 35
30 × 25
22 × 45
25 × 40
30 × 30
25 × 45
30 × 35
35 × 25
25 × 50
30 × 35
35 × 30
25 × 55
30 × 40
35 × 35
30 × 50
35 × 40
30 × 55
35 × 45
35 × 50
85
70
70
60
Composition of ordering code
* = Terminal style
0 = snap-in standard terminals (6.3 ±1) mm
2 = snap-in 3 terminals (4.5 ꢁ1) mm
7 = snap-in short terminals (4.5 ꢁ1) mm
2) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 17
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
3)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 400 V DC
68
82
22 × 25
1990
1650
1360
1130
900
750
750
620
620
500
500
500
410
410
410
410
350
350
350
290
290
290
240
240
200
200
170
170
140
2690
2230
1830
1530
1220
1020
1020
830
830
680
680
680
560
560
560
560
470
470
470
390
390
390
330
330
270
270
230
230
190
1.28
1.41
1.55
1.70
1.98
2.17
2.18
2.49
2.51
2.92
2.89
2.79
3.31
3.29
3.22
3.04
3.68
3.62
3.67
4.14
4.37
4.03
4.91
4.56
5.55
5.18
6.23
5.85
6.63
0.65
0.72
0.79
0.87
1.01
1.11
1.11
1.27
1.28
1.49
1.47
1.42
1.69
1.68
1.64
1.55
1.87
1.85
1.87
2.11
2.23
2.05
2.50
2.32
2.83
2.64
3.18
2.98
3.38
B43305A9686M00*
B43305A9826M00*
B43305A9107M00*
B43305A9127M00*
B43305A9157M00*
B43305A9187M00*
B43305B9187M00*
B43305A9227M00*
B43305B9227M00*
B43305A9277M00*
B43305B9277M00*
B43305C9277M00*
B43305A9337M00*
B43305B9337M00*
B43305C9337M00*
B43305D9337M00*
B43305A9397M00*
B43305B9397M00*
B43305C9397M00*
B43305A9477M00*
B43305B9477M00*
B43305C9477M00*
B43305A9567M00*
B43305B9567M00*
B43305A9687M00*
B43305B9687M00*
B43305A9827M00*
B43305B9827M00*
B43305A9108M00*
22 × 25
22 × 25
22 × 25
22 × 30
22 × 30
25 × 25
22 × 35
25 × 30
22 × 45
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
35 × 25
25 × 45
30 × 35
35 × 30
25 × 50
30 × 40
35 × 30
30 × 45
35 × 35
30 × 50
35 × 40
30 × 55
35 × 45
35 × 50
100
120
150
180
180
220
220
270
270
270
330
330
330
330
390
390
390
470
470
470
560
560
680
680
820
820
1000
Composition of ordering code
* = Terminal style
0 = snap-in standard terminals (6.3 ±1) mm
2 = snap-in 3 terminals (4.5 ꢁ1) mm
7 = snap-in short terminals (4.5 ꢁ1) mm
3) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 17
B43305
Ultra compact ꢁ 85 °C
Technical data and ordering codes
4)
CR
Case
ESRtyp
Zmax
IAC,max
100 Hz
60 °C
A
IAC,R
Ordering code
(composition see below)
100 Hz
20 °C
µF
dimensions 100 Hz
d × l
mm
10 kHz
20 °C
mΩ
100 Hz
85 °C
A
20 °C
mΩ
VR = 450 V DC
68
82
22 × 25
1990
1650
1360
1130
1130
900
900
750
750
750
620
620
620
500
500
500
500
410
410
410
350
350
350
290
290
240
240
200
170
2800
2320
1900
1590
1590
1270
1270
1060
1060
1060
870
870
870
710
710
710
710
580
580
580
490
490
490
410
410
340
340
1.37
1.50
1.66
1.90
1.90
2.20
2.21
2.48
2.42
2.49
2.82
2.78
2.87
3.20
3.17
3.18
3.04
3.70
3.64
3.73
4.11
4.36
4.06
4.92
4.62
5.50
5.20
5.89
6.79
0.70
0.76
0.85
0.97
0.97
1.12
1.13
1.26
1.23
1.27
1.44
1.41
1.46
1.63
1.62
1.62
1.55
1.88
1.86
1.90
2.09
2.22
2.07
2.51
2.35
2.81
2.65
3.00
3.46
B43305A5686M00*
B43305A5826M00*
B43305A5107M00*
B43305A5127M00*
B43305B5127M00*
B43305A5157M00*
B43305B5157M00*
B43305A5187M00*
B43305B5187M00*
B43305C5187M00*
B43305A5227M00*
B43305B5227M00*
B43305C5227M00*
B43305A5277M00*
B43305B5277M00*
B43305C5277M00*
B43305D5277M00*
B43305A5337M00*
B43305B5337M00*
B43305C5337M00*
B43305A5397M00*
B43305B5397M00*
B43305C5397M00*
B43305A5477M00*
B43305B5477M00*
B43305A5567M00*
B43305B5567M00*
B43305A5687M00*
B43305A5827M00*
22 × 25
22 × 25
22 × 30
25 × 25
22 × 35
25 × 30
22 × 40
25 × 30
30 × 25
22 × 45
25 × 35
30 × 30
22 × 50
25 × 40
30 × 30
35 × 25
25 × 50
30 × 35
35 × 30
25 × 55
30 × 40
35 × 30
30 × 45
35 × 35
30 × 50
35 × 40
35 × 45
35 × 55
100
120
120
150
150
180
180
180
220
220
220
270
270
270
270
330
330
330
390
390
390
470
470
560
560
680
820
280
240
Composition of ordering code
* = Terminal style
0 = snap-in standard terminals (6.3 ±1) mm
2 = snap-in 3 terminals (4.5 ꢁ1) mm
7 = snap-in short terminals (4.5 ꢁ1) mm
4) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 17
B43305
Ultra compact ꢁ 85 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Frequency characteristics of ESR
Frequency factor of permissible ripple
Typical behavior
current IAC versus frequency f
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B43305
Ultra compact ꢁ 85 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
B43305
Ultra compact ꢁ 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
B43305
Ultra compact ꢁ 85 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
Chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur.
7.2
"Maximum permissible
operating temperature"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering. "Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 17
B43305
Ultra compact ꢁ 85 °C
Topic
Safety information
Reference
Chapter "General
technical information"
Soldering,
cleaning agents
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals -
accessories"
of insulating
sleeves
when ring clips are used for mounting.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compon-
ents or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applica-
tions requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical In-
dustry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 17 of 17
相关型号:
©2020 ICPDF网 联系我们和版权申明