B43541B8686M087 [EPCOS]
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID;型号: | B43541B8686M087 |
厂家: | EPCOS |
描述: | CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID PC 电容器 |
文件: | 总17页 (文件大小:649K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Aluminum electrolytic capacitors
Snap-in capacitors
Series/Type:
B43541
Date:
December 2013
© EPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Snap-in capacitors
B43541
High ripple current, high voltage ꢁ 85 °C
Long-life grade capacitors
Applications
Frequency converters
Solar inverters
Uninterruptible power supplies
Professional power supplies
Medical appliances
Telecommunications
Features
Voltage derating (0.91 ꢀ VR) enables 105 °C operation,
more details available upon request
Base cooling available upon request for case sizes
30 × 35 mm to 35 × 55 mm
Rated voltages 550 ... 600 V
Long useful life
High reliability
High ripple current capability
Improved performance at high frequencies
High CV product, compact
Optimized internal thermal resistance
Different case sizes available for each capacitance value
Capacitors with all insulation versions pass the needle flame
test according to IEC 60695-11-5 for all flame exposure times
up to 120 s
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with PET insulation available
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection by safety vent on the case wall
Terminals
Standard version with 2 terminals,
2 lengths available: 6.3 and 4.5 mm
3 terminals to ensure correct insertion: length 4.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
550 ... 600 V DC
1.10 ꢀ VR
Rated capacitance CR 47 ... 390 µF
Capacitance tolerance ±20% ꢂ M
Dissipation factor tan δ tan δ ≤ 0.20
(20 °C, 120 Hz)
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Useful life1)
Approx. 20 nH
> 5000 h
Requirements:
∆C/C ≤ ±20% of initial value
85 °C; VR; IAC,R
40 °C; VR; 1.15 ꢀ IAC,R
> 100000 h tan δ
≤ 2 times initial specified limit
≤ initial specified limit
Ileak
Voltage endurance test
Post test requirements:
85 °C; VR
2000 h
∆C/C
tan δ
Ileak
≤ ±10% of initial value
≤ 1.3 times initial specified limit
≤ initial specified limit
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 55 Hz, displacement amplitude 0.35 mm,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature
Max. impedance ratio
at 100 Hz
VR
550 V ... 600 V
Z -25
Z -40
°
°
C / Z 20
C / Z 20
°
°
7
C
C
14
IEC climatic category
Detail specification
To IEC 60068-1:
25/085/56 (ꢁ25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of ꢁ40 °C to
+85 °C but the impedance at ꢁ40 °C should be taken into consideration.
Similar to CECC 30301-811
Sectional specification IEC 60384-4
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Dimensional drawings
Snap-in capacitors with standard insulation (PVC or PET)
Snap-in terminals, length (6.3 ±1) mm.
Also available in a shorter version with a
length of (4.5 ꢁ1) mm. PET insulation is
marked with label "PET" on the sleeve.
Snap-in capacitors are also available with
3 terminals (length (4.5 ꢁ1) mm). PET
insulation is marked with label "PET" on the
sleeve.
Dimensions (mm) Approx.
Packing
Dimensions (mm) Approx.
Packing
weight (g) units (pcs.)
weight (g) units (pcs.)
d +1
25
l ±2
25
30
35
40
50
55
d +1
30
30
30
30
30
30
30
35
35
35
35
35
35
35
l ±2
25
30
35
40
45
50
55
25
30
35
40
45
50
55
13
17
19
22
29
32
130
130
130
130
130
130
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
25
25
25
25
25
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Snap-in capacitors with PVC insulation and PET insulation cap on terminal side
Snap-in terminals, length (6.3 +1/ꢁ1.4) mm.
Also available in a shorter version with a
length of (4.5 ꢁ1.4) mm. PET insulation cap
is positioned under the insulation sleeve.
Snap-in capacitors are also available with
3 terminals (length (4.5 ꢁ1.4) mm). PET
insulation cap is positioned under the
insulation sleeve.
Dimensions (mm)
Approx.
Packing
Dimensions (mm)
Approx.
Packing
weight (g) units (pcs.)
weight (g) units (pcs.)
d +1.4
25
l +2.2/ꢁ2
d +1.4
30
l +2.2/ꢁ2
25
25
30
35
40
50
55
13
17
19
22
29
32
115
115
115
115
115
115
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
25
30
30
25
30
35
25
30
40
25
30
45
25
30
50
30
55
35
25
35
30
35
35
35
40
35
45
35
50
35
55
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
Snap-in capacitors
Terminal version
Insulation version
PVC
PET
PVC plus PET cap
M080
Standard terminals 6.3 mm
Short terminals 4.5 mm
3 terminals 4.5 mm
M000
M060
M067
M062
M007
M087
M002
M082
Ordering examples:
B43541A7107M007
B43541A7107M062
B43541A7107M080
}
}
}
snap-in capacitor with short terminals and standard PVC insulation
snap-in capacitor with 3 terminals and PET insulation
snap-in capacitor with standard terminals and PVC insulation with
additional PET insulation cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Overview of available types
VR (V DC)
550
600
Case dimensions d × l (mm)
CR (µF)
47
25 × 25
25 × 30
56
25 × 25
25 × 30
68
25 × 35
30 × 25
82
25 × 35
30 × 25
25 × 35
30 × 30
100
25 × 35
30 × 30
25 × 40
30 × 35
35 × 25
120
150
180
25 × 40
30 × 35
35 × 25
25 × 50
30 × 35
35 × 30
25 × 50
30 × 35
35 × 30
25 × 55
30 × 45
35 × 35
25 × 55
30 × 40
35 × 35
30 × 50
35 × 40
220
270
30 × 50
35 × 40
30 × 55
35 × 45
30 × 55
35 × 45
35 × 50
330
390
35 × 50
35 × 55
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Technical data and ordering codes
1)
CR
Case
ESRtyp ESRtyp Zmax
IAC,max
IAC,R
Ordering code
100 Hz
20 °C
µF
dimensions 100 Hz 300 Hz 10 kHz 100 Hz 100 Hz (composition see
d × l
20 °C
mΩ
60 °C
mΩ
20 °C
mΩ
60 °C
85 °C
below)
mm
A
A
VR = 550 V DC
56
68
82
25 × 25
2370
1950
1620
1620
1330
1320
1110
1100
1150
890
880
890
740
740
740
600
600
490
560
460
380
380
320
310
260
260
280
210
210
210
180
170
180
140
140
120
120
100
80
3760
3100
2560
2560
2100
2100
1760
1750
1800
1410
1410
1410
1180
1170
1170
960
1.14
1.30
1.48
1.56
1.68
1.78
1.92
2.01
1.95
2.27
2.32
2.43
2.60
2.64
2.73
3.06
3.12
3.54
3.59
4.11
4.63
0.64
0.73
0.83
0.87
0.94
1.00
1.07
1.13
1.09
1.28
1.30
1.44
1.46
1.57
1.62
1.82
1.85
2.10
2.13
2.44
2.74
B43541A7566M0*#
B43541A7686M0*#
B43541A7826M0*#
B43541B7826M0*#
B43541A7107M0*#
B43541B7107M0*#
B43541A7127M0*#
B43541B7127M0*#
B43541C7127M0*#
B43541A7157M0*#
B43541B7157M0*#
B43541C7157M0*#
B43541A7187M0*#
B43541B7187M0*#
B43541C7187M0*#
B43541A7227M0*#
B43541B7227M0*#
B43541A7277M0*#
B43541B7277M0*#
B43541A7337M0*#
B43541A7397M0*#
25 × 30
25 × 35
30 × 25
25 × 35
30 × 30
25 × 40
30 × 35
35 × 25
25 × 50
30 × 35
35 × 30
25 × 55
30 × 40
35 × 35
30 × 50
35 × 40
30 × 55
35 × 45
35 × 50
35 × 55
82
100
100
120
120
120
150
150
150
180
180
180
220
220
270
270
330
390
960
780
790
640
490
400
340
550
VR = 600 V DC
47
56
68
68
82
25 × 25
2470
2070
1700
1700
1420
1410
1160
1160
1160
970
600
500
410
410
340
340
280
280
280
230
3840
3220
2660
2660
2200
2200
1810
1810
1810
1510
1.07
1.20
1.37
1.45
1.55
1.64
1.79
1.87
1.95
2.06
0.60
0.67
0.77
0.81
0.87
0.92
1.00
1.05
1.09
1.15
B43541A8476M0*#
B43541A8566M0*#
B43541A8686M0*#
B43541B8686M0*#
B43541A8826M0*#
B43541B8826M0*#
B43541A8107M0*#
B43541B8107M0*#
B43541C8107M0*#
B43541A8127M0*#
25 × 30
25 × 35
30 × 25
25 × 35
30 × 30
25 × 40
30 × 35
35 × 25
25 × 50
82
100
100
100
120
Composition of ordering code
* = Insulation feature
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
0 = PVC insulation
6 = PET insulation
2 = snap-in 3 terminals (4.5 mm)
8 = PVC insulation with additional PET insulation
cap on terminal side
7 = snap-in short terminals (4.5 mm)
1) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Technical data and ordering codes
2)
CR
Case
ESRtyp ESRtyp Zmax
IAC,max
IAC,R
Ordering code
100 Hz
20 °C
µF
dimensions 100 Hz 300 Hz 10 kHz 100 Hz 100 Hz (composition see
d × l
20 °C
mΩ
60 °C
mΩ
20 °C
mΩ
60 °C
85 °C
below)
mm
A
A
VR = 600 V DC
120
120
150
150
150
180
180
220
220
270
30 × 35
970
970
770
770
770
640
650
530
530
430
230
230
190
190
190
150
160
130
130
110
1510
1510
1210
1210
1210
1010
1010
830
2.10
2.20
2.42
2.47
2.55
2.81
2.87
3.24
3.29
3.78
1.18
1.30
1.36
1.46
1.51
1.67
1.70
1.92
1.95
2.24
B43541B8127M0*#
B43541C8127M0*#
B43541A8157M0*#
B43541B8157M0*#
B43541C8157M0*#
B43541A8187M0*#
B43541B8187M0*#
B43541A8227M0*#
B43541B8227M0*#
B43541A8277M0*#
35 × 30
25 × 55
30 × 45
35 × 35
30 × 50
35 × 40
30 × 55
35 × 45
35 × 50
830
680
Composition of ordering code
* = Insulation feature
# = Terminal style
0 = snap-in standard terminals (6.3 mm)
0 = PVC insulation
6 = PET insulation
2 = snap-in 3 terminals (4.5 mm)
8 = PVC insulation with additional PET insulation
cap on terminal side
7 = snap-in short terminals (4.5 mm)
2) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 ꢀ IAC (100 Hz)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Useful life1)
The useful life graph is calculated for each individual capacitor and is available upon request.
Frequency factor of permissible ripple
current IAC versus frequency f
Typical behavior
Frequency characteristics of ESR
Typical behavior
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. However, the amount of dangerous materials used in our products is limited to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes are
affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Reference
chapter "General
technical information"
Polarity
Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage
Voltages polarity classes should be prevented by 3.1.6
connecting a diode.
"Reverse voltage"
Mounting
position of screw-
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1.
"Mounting positions of
capacitors with screw
terminals"
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
11.3
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Soldering
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Soldering,
Do not allow halogenated hydrocarbons to come 11.6
cleaning agents
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Upper category
temperature
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Passive
Avoid external energy, such as fire or electricity.
8.1
flammability
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Topic
Safety information
Reference
chapter "General
technical information"
Active
Avoid overload of the capacitors.
8.2
flammability
"Active flammability"
Maintenance
Make periodic inspections of the capacitors.
10
Before the inspection, make sure that the power "Maintenance"
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Storage
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
7.3
Storage conditions
Reference
chapter "Capacitors with
screw terminals"
Breakdown strength Do not damage the insulating sleeve, especially
"Screw terminals ꢁ
of insulating
sleeves
when ring clips are used for mounting.
accessories"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Symbols and terms
Symbol English
German
C
Capacitance
Kapazität
CR
Rated capacitance
Series capacitance
Nennkapazität
Serienkapazität
CS
CS,T
Cf
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
d
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
dmax
ESL
ESR
ESRf
Equivalent series resistance
Equivalent series resistance at
frequency f
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
Equivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f
Frequency
Frequenz
I
Current
Strom
IAC
Alternating current (ripple current)
Root-mean-square value of alternating
current
Wechselstrom
Wechselstrom, Effektivwert
IAC,rms
IAC,f
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
IAC,max
IAC,R
IAC,R (B) Rated ripple current for base cooling
Nennwechselstromstrom für Bodenkühlung
Reststrom
Ileak
Ileak,op
l
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
lmax
R
Rins
Rsymm
T
Insulation resistance
Balancing resistance
Temperature
Isolationswiderstand
Symmetrierwiderstand
Temperatur
∆T
TA
TC
TB
t
Temperature difference
Ambient temperature
Case temperature
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Capacitor base temperature
Time
Temperatur des Becherbodens
Zeit
∆t
Period
Zeitraum
tb
Service life (operating hours)
Brauchbarkeitsdauer (Betriebszeit)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 17
B43541
High ripple current, high voltage ꢁ 85 °C
Symbol English
German
V
Voltage
Spannung
VF
Vop
VR
VS
XC
XL
Z
Forming voltage
Formierspannung
Operating voltage
Rated voltage, DC voltage
Surge voltage
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Capacitive reactance
Inductive reactance
Impedance
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
ZT
tan δ
λ
Impedance at temperature T
Dissipation factor
Failure rate
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
ε0
Absolute permittivity
Relative permittivity
Angular velocity; 2 ꢀ π ꢀ f
Elektrische Feldkonstante
Dielektrizitätszahl
εr
ω
Kreisfrequenz; 2 ꢀ π ꢀ f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 17
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other coun-
tries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 17 of 17
相关型号:
©2020 ICPDF网 联系我们和版权申明