B81130-B1684-K026 [EPCOS]

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED;
B81130-B1684-K026
型号: B81130-B1684-K026
厂家: EPCOS    EPCOS
描述:

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED

电容器
文件: 总5页 (文件大小:133K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EMI Suppression Capacitors  
X2 / 275 Vac  
B 81 130  
X2 capacitors with very small dimensions  
Rated ac voltage 275 V, 50/60 Hz  
Construction  
Dielectric: polypropylene (MKP)  
Plastic case (UL 94 V-0)  
Epoxy resin sealing, flame-retardant  
Impregnated  
Features  
Very small dimensions  
Self-healing properties  
Terminals  
Lead spacing Lead diameter Lead length l1  
0,4  
10 mm  
15 mm  
d (mm)  
0,6  
(mm)  
Parallel wire leads, tinned  
Two standard lead lengths  
available: 6 mm und 26 mm  
6 – 1  
0,8  
6 – 1 26  
2
Other lead lengths available upon request.  
Lead spacing = 10 mm Lead spacing 15 mm  
(22 nF ... 1,0 µF)  
Marking  
Manufacturer’s logo and lot number  
date code,  
rated capacitance (coded),  
capacitance tolerance (code letter),  
rated ac voltage, type number,  
interference suppression sub-class (X2),  
style (MKP), climatic category,  
awarded marks of conformity.  
AAAAA C1103  
XX-10n M 275V~  
AAAAA C1104  
XX-µ1 M 275V~  
B81130 X2 MKP/SH  
B81130 X2 MKP/SH  
40/100/21/C  
40/100/21/C  
V
V
D
E
D
E
IEC 384-14(2) 250 V~  
250 V~  
KMK0570-T  
KMK0571-2  
Lead spacing = 27,5 mm  
(1,5 and 2,2 µF)  
AAAAA C1155  
XX-1µ5 M 275V~  
Delivery mode  
B81130 X2 MKP/SH  
Bulk (untaped)  
Taped (Ammo pack or reel)  
For notes on taping,  
40/100/21/C  
V
D
E
IEC 384-14(2)  
250 V~  
KMK0699-I  
refer to chapter “Taping and packing”, page 274.  
Marks of conformity  
Marks of  
Standards  
Certificate  
conformity  
EN 132400 / IEC 384-14, 2nd edition  
UL 1414 (VR = 250 Vac)  
Approved by UL according to  
CSA C22.2 No. 0; 1 (VR = 250 Vac)  
18643-4670-1010/A1G  
E97863/97NK11940A  
E97863/97NK11940A  
1)  
1) Not for 1,5 and 2,2 µF  
231 12/00  
 
 
X2  
B 81 130  
275 Vac  
Ordering codes and packing units  
Lead  
spacing  
CR  
Maximum  
dimensions  
b × h × l  
(mm)  
Ordering code1)  
Packing units (pcs)  
Ammo Reel  
pack  
Untaped  
Lead length  
0,4  
mm  
10  
6 mm  
26 mm  
10 nF  
15 nF  
22 nF  
33 nF  
33 nF  
47 nF  
4,0 × 9,0 × 13,0 B81130-C1103-+  
4,0 × 9,0 × 13,0 B81130-C1153-+  
5,0 × 11,0 × 13,0 B81130-C1223-+  
5,0 × 11,0 × 13,0 B81130-C1333-M  
6,0 × 12,0 × 13,0 B81130-A1333-+  
1000  
1000  
830  
830  
680  
1700  
1700  
1300  
1300  
1100  
1100  
1000  
1000  
1000  
1000  
1000  
1000  
***  
***  
***  
***  
***  
***  
6,0 × 12,0 × 13,0 B81130-C1473-+  
680  
15  
22 nF  
33 nF  
47 nF  
68 nF  
5,0 × 10,5 × 18,0 B81130-B1223-+  
5,0 × 10,5 × 18,0 B81130-B1333-+  
5,0 × 10,5 × 18,0 B81130-B1473-+  
6,0 × 11,0 × 18,0 B81130-C1683-+  
1170  
1170  
1170  
960  
960  
830  
1300  
1300  
1300  
1100  
1100  
900  
1000  
1000  
1000  
1000  
1000  
1000  
500  
1000  
1000  
1000  
1000  
1000  
800  
***  
***  
***  
***  
0,10 µF 6,0 × 12,0 × 18,0 B81130-C1104-M  
0,10 µF 7,0 × 12,5 × 18,0 B81130-A1104-+  
0,15 µF 8,5 × 14,5 × 18,0 B81130-C1154-+  
0,22 µF 9,0 × 17,5 × 18,0 B81130-C1224-+  
***  
***  
***  
***  
680  
640  
700  
700  
500  
500  
500  
22,5  
27,5  
0,15 µF 6,0 × 15,0 × 26,5 B81130-B1154-+  
0,22 µF 7,0 × 16,0 × 26,5 B81130-B1224-+  
0,33 µF 8,5 × 16,5 × 26,5 B81130-C1334-+  
680  
580  
480  
390  
390  
370  
700  
600  
500  
400  
400  
350  
720  
630  
510  
540  
540  
510  
500  
500  
450  
350  
300  
300  
***  
***  
***  
0,47 µF 10,5 × 16,5 × 26,5 B81130-C1474-M  
0,47 µF 10,5 × 18,5 × 26,5 B81130-A1474-+  
***  
***  
0,68 µF 11,0 × 20,5 × 26,5 B81130-C1684-M  
***  
0,47 µF 11,0 × 21,0 × 31,5 B81130-B1474-+  
0,68 µF 11,0 × 21,0 × 31,5 B81130-B1684-+  
1,0 µF 12,5 × 21,5 × 31,5 B81130-C1105-M  
1,0 µF 13,5 × 23,0 × 31,5 B81130-A1105-+  
1,5 µF 15,0 × 24,5 × 31,5 B81130-C1155-M  
1,5 µF 18,0 × 27,5 × 31,5 B81130-A1155-+  
350  
350  
300  
250  
320  
320  
280  
260  
240  
200  
200  
180  
200  
200  
200  
150  
150  
100  
100  
100  
***  
***  
***  
***  
***  
***  
***  
***  
2,2 µF 18,0 × 27,5 × 31,5 B81130-C1225-M  
2,2 µF 19,0 × 30,0 × 31,5 B81130-A1225-+  
Capacitance tolerance: 20 % =ˆ M, 10 % =ˆ K (closer tolerances upon request)  
1) Replace the + by the code letter for the required capacitance tolerance.  
Replace the *** by the code number for the required lead length or packing.  
000 = lead length 6 mm (untaped)  
026 = lead length 26 mm (untaped)  
289 = taped, Ammo pack  
189 = taped, reel  
232 12/00  
 
B 81 130  
275 Vac  
X2  
Technical data  
Climatic category  
40/100/21  
in accordance with IEC 60068-1  
Lower category temperature Tmin  
40 °C  
Upper category temperature Tmax + 100 °C  
Passive flammability category  
in accordance with IEC 40 (CO) 752 C  
Damp heat test  
21 days/40 °C/93 % relative humidity  
Limit values after damp  
heat test  
Capacitance change |C/C|  
Dissipation factor change tan δ  
3 %  
0,5 103 (at 1 kHz)  
1,0 103 (at 10 kHz)  
50 % of minimum  
as-delivered values  
Insulation resistance Ris  
or time constant τ = CR Ris  
Permissible  
275 V (50/60 Hz)  
continuous ac voltage  
Permissible continuous dc voltage 560 V  
DC test voltage  
2121 V, 2 s  
Dissipation factor tan δ (in 103  
at 20 °C  
(upper limit values)  
)
CR 0,1 µF 0,1 µF < CR 1 µF CR > 1 µF  
1,0  
at  
1 kHz  
100 kHz 5  
1,0  
10  
1,0  
13  
Insulation resistance Ris  
CR 0,33 µF  
100 GΩ  
CR > 0,33 µF  
30 000 s  
or time constant τ = CR Ris  
at 20 °C, rel. humidity 65 %  
(minimum as-delivered values)  
Impedance Z  
versus frequency f  
(typical values)  
233 12/00  
X2  
B 81 130  
275 Vac  
Pulse handling capability  
Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth).  
VR  
Max. rate of voltage rise Vpp/τ in V/µs (for Vpp = VˆR)  
Lead spacing  
10 mm  
290  
15 mm  
110  
22,5 mm  
50  
27,5 mm  
30  
275 Vac  
For Vpp < VˆR, the permissible voltage rise rate Vpp/τ may be multiplied by the factor VˆR/Vpp  
.
Also refer to the calculation example in chapter “General technical information”, page 302.  
VR  
Pulse characteristic k0 in V2/µs (for Vpp VˆR)  
Lead spacing  
10 mm  
15 mm  
80 000  
22,5 mm  
35 000  
27,5 mm  
21 000  
275 Vac  
220 000  
234 12/00  
Herausgegeben von EPCOS AG  
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND  
EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und  
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG  
nicht gestattet.  
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften  
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen  
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.  
Diese Broschüre ersetzt die vorige Ausgabe.  
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-  
genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.  
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte  
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-  
sellschaft einzuholen.  
Published by EPCOS AG  
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-  
chure and the information contained therein without EPCOSprior express consent is prohibited.  
The information contained in this brochure describes the type of component and shall not be con-  
sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for  
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the  
ZVEI (German Electrical and Electronic ManufacturersAssociation), unless otherwise agreed.  
This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
1

相关型号:

B81130-B1684-K189

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS

B81130-B1684-M

KONDENSATOR X2 RASTER 27.5MM 680NF
ETC

B81130-B1684-M000

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS

B81130-B1684-M026

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED
EPCOS

B81130-B1684-M189

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.68 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS

B81130-C1103

EMI Suppression Capacitors
EPCOS

B81130-C1103-K000

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS

B81130-C1103-K189

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS

B81130-C1103-M

KONDENSATOR X2 RASTER 10MM 10NF
ETC

B81130-C1103-M000

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS

B81130-C1103-M189

Film Capacitor, Polypropylene, 760V, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount, 5116, RADIAL LEADED, LEAD FREE
EPCOS

B81130-C1103-M289

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 760 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
EPCOS